Re: [PATCH] Staging:dt3155: fix code style generated bycheckpatch.pl in dt3155_drv.c.

From: Joe Eloff
Date: Mon Jul 12 2010 - 09:27:20 EST

Next message: Giangiacomo Mariotti: "Re: BTRFS: Unbelievably slow with kvm/qemu"
Previous message: Yong Zhang: "Re: [PATCH] workqueue: fix locking in retry path ofmaybe_create_worker()"
In reply to: Gorskin Ilya: "[PATCH] Staging:dt3155: fix code style generated by checkpatch.pl in dt3155_drv.c."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi I was working on this, but seems like you have it under control.

Before doing something in the future just check the last week on the
mailing list you would have found a few messages about this.

Regards,

Joe

On Mon, 2010-07-12 at 15:29 +0600, Gorskin Ilya wrote:
> This is a patch to the dt3155_drv.c file that fixes up a warning & errors
> found by the checkpatch.pl tool.
>
> Signed-off-by: Ilya Gorskin <Revent82@xxxxxxxxx>
> ---
> drivers/staging/dt3155/dt3155_drv.c | 952 ++++++++++++++++-------------------
> 1 files changed, 445 insertions(+), 507 deletions(-)
>
> diff --git a/drivers/staging/dt3155/dt3155_drv.c b/drivers/staging/dt3155/dt3155_drv.c
> index 40ef97f..d23f013 100644
> --- a/drivers/staging/dt3155/dt3155_drv.c
> +++ b/drivers/staging/dt3155/dt3155_drv.c
> @@ -1,7 +1,7 @@
> /*
>
> Copyright 1996,2002,2005 Gregory D. Hager, Alfred A. Rizzi, Noah J. Cowan,
> - Jason Lapenta, Scott Smedley, Greg Sharp
> + Jason Lapenta, Scott Smedley, Greg Sharp
>
> This file is part of the DT3155 Device Driver.
>
> @@ -27,14 +27,14 @@ MA 02111-1307 USA
> 03-Jul-2000 JML n/a
> 10-Oct-2001 SS port to 2.4 kernel
> 02-Apr-2002 SS Mods to use allocator as a standalone module;
> - Merged John Roll's changes (john@xxxxxxxxxxxxxxx)
> - to make work with multiple boards.
> + Merged John Roll's changes (john@xxxxxxxxxxxxxxx)
> + to make work with multiple boards.
> 02-Jul-2002 SS Merged James Rose's chages (rosejr@xxxxxxxxxx) to:
> - * fix successive interrupt-driven captures
> - * add select/poll support.
> + * fix successive interrupt-driven captures
> + * add select/poll support.
> 10-Jul-2002 GCS Add error check when ndevices > MAXBOARDS.
> 02-Aug-2002 GCS Fix field mode so that odd (lower) field is stored
> - in lower half of buffer.
> + in lower half of buffer.
> 05-Aug-2005 SS port to 2.6 kernel.
> 26-Oct-2009 SS port to 2.6.30 kernel.
>
> @@ -65,8 +65,8 @@ extern void printques(int);
> #include <linux/sched.h>
> #include <linux/smp_lock.h>
>
> -#include <asm/io.h>
> -#include <asm/uaccess.h>
> +#include <linux/io.h>
> +#include <linux/uaccess.h>
>
> #include "dt3155.h"
> #include "dt3155_drv.h"
> @@ -89,16 +89,16 @@ int dt3155_errno = 0;
> #define MAXPCI 16
>
> #ifdef DT_DEBUG
> -#define DT_3155_DEBUG_MSG(x,y) printk(x,y)
> +#define DT_3155_DEBUG_MSG(x, y) printk(x, y)
> #else
> -#define DT_3155_DEBUG_MSG(x,y)
> +#define DT_3155_DEBUG_MSG(x, y)
> #endif
>
> /* wait queue for interrupts */
> wait_queue_head_t dt3155_read_wait_queue[MAXBOARDS];
>
> #define DT_3155_SUCCESS 0
> -#define DT_3155_FAILURE -EIO
> +#define DT_3155_FAILURE (-EIO)
>
> /* set to dynamicaly allocate, but it is tunable: */
> /* insmod DT_3155 dt3155 dt3155_major=XX */
> @@ -138,9 +138,9 @@ u32 unique_tag = 0;;
> * to idle. I don't know why this works and the other way doesn't.
> * (James Rose)
> */
> -static void quick_stop (int minor)
> +static void quick_stop(int minor)
> {
> - // TODO: scott was here
> + /* TODO: scott was here */
> #if 1
> ReadMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
> /* disable interrupts */
> @@ -170,247 +170,220 @@ static void quick_stop (int minor)
> *****************************************************/
> static void dt3155_isr(int irq, void *dev_id, struct pt_regs *regs)
> {
> - int minor = -1;
> - int index;
> - unsigned long flags;
> - u32 buffer_addr;
> + int minor = -1;
> + int index;
> + unsigned long flags;
> + u32 buffer_addr;
>
> /* find out who issued the interrupt */
> - for (index = 0; index < ndevices; index++) {
> - if(dev_id == (void*) &dt3155_status[index])
> - {
> - minor = index;
> - break;
> - }
> - }
> + for (index = 0; index < ndevices; index++) {
> + if (dev_id == (void *) &dt3155_status[index]) {
> + minor = index;
> + break;
> + }
> + }
>
> /* hopefully we should not get here */
> - if (minor < 0 || minor >= MAXBOARDS) {
> - printk(KERN_ERR "dt3155_isr called with invalid dev_id\n");
> - return;
> - }
> + if (minor < 0 || minor >= MAXBOARDS) {
> + printk(KERN_ERR "dt3155_isr called with invalid dev_id\n");
> + return;
> + }
>
> /* Check for corruption and set a flag if so */
> - ReadMReg((dt3155_lbase[minor] + CSR1), csr1_r.reg);
> -
> - if ((csr1_r.fld.FLD_CRPT_EVE) || (csr1_r.fld.FLD_CRPT_ODD))
> - {
> - /* TODO: this should probably stop acquisition */
> - /* and set some flags so that dt3155_read */
> - /* returns an error next time it is called */
> - dt3155_errno = DT_ERR_CORRUPT;
> - printk("dt3155: corrupt field\n");
> - return;
> + ReadMReg((dt3155_lbase[minor] + CSR1), csr1_r.reg);
> +
> + if ((csr1_r.fld.FLD_CRPT_EVE) || (csr1_r.fld.FLD_CRPT_ODD)) {
> + /* TODO: this should probably stop acquisition */
> + /* and set some flags so that dt3155_read */
> + /* returns an error next time it is called */
> + dt3155_errno = DT_ERR_CORRUPT;
> + printk("dt3155: corrupt field\n");
> + return;
> }
>
> - ReadMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
> + ReadMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
>
> - /* Handle the even field ... */
> - if (int_csr_r.fld.FLD_END_EVE)
> - {
> - if ((dt3155_status[minor].state & DT3155_STATE_MODE) ==
> - DT3155_STATE_FLD)
> - {
> - dt3155_fbuffer[minor]->frame_count++;
> + /* Handle the even field ... */
> + if (int_csr_r.fld.FLD_END_EVE) {
> + if ((dt3155_status[minor].state & DT3155_STATE_MODE) ==
> + DT3155_STATE_FLD) {
> + dt3155_fbuffer[minor]->frame_count++;
> }
>
> - ReadI2C(dt3155_lbase[minor], EVEN_CSR, &i2c_even_csr.reg);
> + ReadI2C(dt3155_lbase[minor], EVEN_CSR, &i2c_even_csr.reg);
>
> - /* Clear the interrupt? */
> - int_csr_r.fld.FLD_END_EVE = 1;
> + /* Clear the interrupt? */
> + int_csr_r.fld.FLD_END_EVE = 1;
>
> - /* disable the interrupt if last field */
> - if (dt3155_fbuffer[minor]->stop_acquire)
> - {
> - printk("dt3155: even stopped.\n");
> - dt3155_fbuffer[minor]->even_stopped = 1;
> - if (i2c_even_csr.fld.SNGL_EVE)
> - {
> - int_csr_r.fld.FLD_END_EVE_EN = 0;
> - }
> - else
> - {
> - i2c_even_csr.fld.SNGL_EVE = 1;
> - }
> - }
> + /* disable the interrupt if last field */
> + if (dt3155_fbuffer[minor]->stop_acquire) {
> + printk("dt3155: even stopped.\n");
> + dt3155_fbuffer[minor]->even_stopped = 1;
>
> - WriteMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
> + if (i2c_even_csr.fld.SNGL_EVE)
> + int_csr_r.fld.FLD_END_EVE_EN = 0;
> + else
> + i2c_even_csr.fld.SNGL_EVE = 1;
> + }
>
> - /* Set up next DMA if we are doing FIELDS */
> - if ((dt3155_status[minor].state & DT3155_STATE_MODE) ==
> - DT3155_STATE_FLD)
> - {
> - /* GCS (Aug 2, 2002) -- In field mode, dma the odd field
> - into the lower half of the buffer */
> - const u32 stride = dt3155_status[minor].config.cols;
> - buffer_addr = dt3155_fbuffer[minor]->
> - frame_info[dt3155_fbuffer[minor]->active_buf].addr
> - + (DT3155_MAX_ROWS / 2) * stride;
> - local_save_flags(flags);
> - local_irq_disable();
> - wake_up_interruptible(&dt3155_read_wait_queue[minor]);
> -
> - /* Set up the DMA address for the next field */
> - local_irq_restore(flags);
> - WriteMReg((dt3155_lbase[minor] + ODD_DMA_START), buffer_addr);
> + WriteMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
> +
> + /* Set up next DMA if we are doing FIELDS */
> + if ((dt3155_status[minor].state & DT3155_STATE_MODE)
> + == DT3155_STATE_FLD) {
> + /* GCS (Aug 2, 2002) -- In field mode, dma the odd field
> + into the lower half of the buffer */
> + const u32 stride = dt3155_status[minor].config.cols;
> + buffer_addr = dt3155_fbuffer[minor]->
> + frame_info[dt3155_fbuffer[minor]->active_buf].addr
> + + (DT3155_MAX_ROWS / 2) * stride;
> + local_save_flags(flags);
> + local_irq_disable();
> + wake_up_interruptible(&dt3155_read_wait_queue[minor]);
> + /* Set up the DMA address for the next field */
> + local_irq_restore(flags);
> + WriteMReg((dt3155_lbase[minor] + ODD_DMA_START), buffer_addr);
> }
>
> /* Check for errors. */
> - i2c_even_csr.fld.DONE_EVE = 1;
> - if (i2c_even_csr.fld.ERROR_EVE)
> - dt3155_errno = DT_ERR_OVERRUN;
> -
> - WriteI2C(dt3155_lbase[minor], EVEN_CSR, i2c_even_csr.reg);
> -
> - /* Note that we actually saw an even field meaning */
> - /* that subsequent odd field complete the frame */
> - dt3155_fbuffer[minor]->even_happened = 1;
> -
> - /* recording the time that the even field finished, this should be */
> - /* about time in the middle of the frame */
> - do_gettimeofday(&(dt3155_fbuffer[minor]->
> - frame_info[dt3155_fbuffer[minor]->
> - active_buf].time));
> - return;
> + i2c_even_csr.fld.DONE_EVE = 1;
> + if (i2c_even_csr.fld.ERROR_EVE)
> + dt3155_errno = DT_ERR_OVERRUN;
> +
> + WriteI2C(dt3155_lbase[minor], EVEN_CSR, i2c_even_csr.reg);
> +
> + /* Note that we actually saw an even field meaning */
> + /* that subsequent odd field complete the frame */
> + dt3155_fbuffer[minor]->even_happened = 1;
> +
> + /* recording the time that the even field finished, this should be */
> + /* about time in the middle of the frame */
> + do_gettimeofday(&(dt3155_fbuffer[minor]->
> + frame_info[dt3155_fbuffer[minor]->
> + active_buf].time));
> + return;
> }
>
> /* ... now handle the odd field */
> - if (int_csr_r.fld.FLD_END_ODD)
> - {
> - ReadI2C(dt3155_lbase[minor], ODD_CSR, &i2c_odd_csr.reg);
> + if (int_csr_r.fld.FLD_END_ODD) {
> + ReadI2C(dt3155_lbase[minor], ODD_CSR, &i2c_odd_csr.reg);
>
> - /* Clear the interrupt? */
> - int_csr_r.fld.FLD_END_ODD = 1;
> + /* Clear the interrupt? */
> + int_csr_r.fld.FLD_END_ODD = 1;
>
> - if (dt3155_fbuffer[minor]->even_happened ||
> - (dt3155_status[minor].state & DT3155_STATE_MODE) ==
> - DT3155_STATE_FLD)
> - {
> - dt3155_fbuffer[minor]->frame_count++;
> + if (dt3155_fbuffer[minor]->even_happened ||
> + (dt3155_status[minor].state & DT3155_STATE_MODE) ==
> + DT3155_STATE_FLD) {
> + dt3155_fbuffer[minor]->frame_count++;
> }
>
> - if (dt3155_fbuffer[minor]->stop_acquire &&
> - dt3155_fbuffer[minor]->even_stopped)
> - {
> - printk(KERN_DEBUG "dt3155: stopping odd..\n");
> - if (i2c_odd_csr.fld.SNGL_ODD)
> - {
> - /* disable interrupts */
> - int_csr_r.fld.FLD_END_ODD_EN = 0;
> - dt3155_status[minor].state &= ~(DT3155_STATE_STOP|0xff);
> -
> - /* mark the system stopped: */
> - dt3155_status[minor].state |= DT3155_STATE_IDLE;
> - dt3155_fbuffer[minor]->stop_acquire = 0;
> - dt3155_fbuffer[minor]->even_stopped = 0;
> -
> - printk(KERN_DEBUG "dt3155: state is now %x\n",
> - dt3155_status[minor].state);
> - }
> - else
> - {
> - i2c_odd_csr.fld.SNGL_ODD = 1;
> - }
> + if (dt3155_fbuffer[minor]->stop_acquire &&
> + dt3155_fbuffer[minor]->even_stopped) {
> + printk(KERN_DEBUG "dt3155: stopping odd..\n");
> + if (i2c_odd_csr.fld.SNGL_ODD) {
> + /* disable interrupts */
> + int_csr_r.fld.FLD_END_ODD_EN = 0;
> + dt3155_status[minor].state &= ~(DT3155_STATE_STOP|0xff);
> +
> + /* mark the system stopped: */
> + dt3155_status[minor].state |= DT3155_STATE_IDLE;
> + dt3155_fbuffer[minor]->stop_acquire = 0;
> + dt3155_fbuffer[minor]->even_stopped = 0;
> +
> + printk(KERN_DEBUG "dt3155: state is now %x\n",
> + dt3155_status[minor].state);
> + } else {
> + i2c_odd_csr.fld.SNGL_ODD = 1;
> + }
> }
>
> - WriteMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
> + WriteMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
>
> /* if the odd field has been acquired, then */
> /* change the next dma location for both fields */
> /* and wake up the process if sleeping */
> - if (dt3155_fbuffer[minor]->even_happened ||
> - (dt3155_status[minor].state & DT3155_STATE_MODE) ==
> - DT3155_STATE_FLD)
> - {
> + if (dt3155_fbuffer[minor]->even_happened ||
> + (dt3155_status[minor].state & DT3155_STATE_MODE) ==
> + DT3155_STATE_FLD) {
>
> - local_save_flags(flags);
> - local_irq_disable();
> + local_save_flags(flags);
> + local_irq_disable();
>
> #ifdef DEBUG_QUES_B
> - printques(minor);
> + printques(minor);
> #endif
> - if (dt3155_fbuffer[minor]->nbuffers > 2)
> - {
> - if (!are_empty_buffers(minor))
> - {
> - /* The number of active + locked buffers is
> - * at most 2, and since there are none empty, there
> - * must be at least nbuffers-2 ready buffers.
> - * This is where we 'drop frames', oldest first. */
> - push_empty(pop_ready(minor), minor);
> + if (dt3155_fbuffer[minor]->nbuffers > 2) {
> + if (!are_empty_buffers(minor)) {
> + /* The number of active + locked buffers is
> + * at most 2, and since there are none empty, there
> + * must be at least nbuffers-2 ready buffers.
> + * This is where we 'drop frames', oldest first. */
> + push_empty(pop_ready(minor), minor);
> }
>
> - /* The ready_que can't be full, since we know
> - * there is one active buffer right now, so it's safe
> - * to push the active buf on the ready_que. */
> - push_ready(minor, dt3155_fbuffer[minor]->active_buf);
> - /* There's at least 1 empty -- make it active */
> - dt3155_fbuffer[minor]->active_buf = pop_empty(minor);
> - dt3155_fbuffer[minor]->
> + /* The ready_que can't be full, since we know
> + * there is one active buffer right now, so it's safe
> + * to push the active buf on the ready_que. */
> + push_ready(minor, dt3155_fbuffer[minor]->active_buf);
> + /* There's at least 1 empty -- make it active */
> + dt3155_fbuffer[minor]->active_buf = pop_empty(minor);
> + dt3155_fbuffer[minor]->
> frame_info[dt3155_fbuffer[minor]->
> - active_buf].tag = ++unique_tag;
> - }
> - else /* nbuffers == 2, special case */
> - { /* There is 1 active buffer.
> - * If there is a locked buffer, keep the active buffer
> - * the same -- that means we drop a frame.
> - */
> - if (dt3155_fbuffer[minor]->locked_buf < 0)
> - {
> - push_ready(minor,
> - dt3155_fbuffer[minor]->active_buf);
> - if (are_empty_buffers(minor))
> - {
> - dt3155_fbuffer[minor]->active_buf =
> - pop_empty(minor);
> - }
> - else
> - { /* no empty or locked buffers, so use a readybuf */
> - dt3155_fbuffer[minor]->active_buf =
> - pop_ready(minor);
> + active_buf].tag = ++unique_tag;
> + } else { /* nbuffers == 2, special case */
> + /* There is 1 active buffer.
> + * If there is a locked buffer, keep the active buffer
> + * the same -- that means we drop a frame. */
> + if (dt3155_fbuffer[minor]->locked_buf < 0) {
> + push_ready(minor,
> + dt3155_fbuffer[minor]->active_buf);
> + if (are_empty_buffers(minor)) {
> + dt3155_fbuffer[minor]->active_buf =
> + pop_empty(minor);
> + } else {
> + /* no empty or locked buffers, so use a readybuf */
> + dt3155_fbuffer[minor]->active_buf =
> + pop_ready(minor);
> + }
> }
> }
> - }
>
> #ifdef DEBUG_QUES_B
> - printques(minor);
> + printques(minor);
> #endif
>
> - dt3155_fbuffer[minor]->even_happened = 0;
> + dt3155_fbuffer[minor]->even_happened = 0;
>
> - wake_up_interruptible(&dt3155_read_wait_queue[minor]);
> + wake_up_interruptible(&dt3155_read_wait_queue[minor]);
>
> - local_irq_restore(flags);
> + local_irq_restore(flags);
> }
>
>
> /* Set up the DMA address for the next frame/field */
> buffer_addr = dt3155_fbuffer[minor]->
> frame_info[dt3155_fbuffer[minor]->active_buf].addr;
> - if ((dt3155_status[minor].state & DT3155_STATE_MODE) ==
> - DT3155_STATE_FLD)
> - {
> - WriteMReg((dt3155_lbase[minor] + EVEN_DMA_START), buffer_addr);
> - }
> - else
> - {
> - WriteMReg((dt3155_lbase[minor] + EVEN_DMA_START), buffer_addr);
> + if ((dt3155_status[minor].state & DT3155_STATE_MODE) ==
> + DT3155_STATE_FLD) {
> + WriteMReg((dt3155_lbase[minor] + EVEN_DMA_START), buffer_addr);
> + } else {
> + WriteMReg((dt3155_lbase[minor] + EVEN_DMA_START), buffer_addr);
>
> - WriteMReg((dt3155_lbase[minor] + ODD_DMA_START), buffer_addr
> + WriteMReg((dt3155_lbase[minor] + ODD_DMA_START), buffer_addr
> + dt3155_status[minor].config.cols);
> - }
> + }
>
> /* Do error checking */
> i2c_odd_csr.fld.DONE_ODD = 1;
> - if (i2c_odd_csr.fld.ERROR_ODD)
> + if (i2c_odd_csr.fld.ERROR_ODD)
> dt3155_errno = DT_ERR_OVERRUN;
>
> - WriteI2C(dt3155_lbase[minor], ODD_CSR, i2c_odd_csr.reg);
> + WriteI2C(dt3155_lbase[minor], ODD_CSR, i2c_odd_csr.reg);
>
> return;
> }
> /* If we get here, the Odd Field wasn't it either... */
> - printk("neither even nor odd. shared perhaps?\n");
> + printk("neither even nor odd. shared perhaps?\n");
> }
>
> /*****************************************************
> @@ -423,8 +396,7 @@ static void dt3155_init_isr(int minor)
> {
> const u32 stride = dt3155_status[minor].config.cols;
>
> - switch (dt3155_status[minor].state & DT3155_STATE_MODE)
> - {
> + switch (dt3155_status[minor].state & DT3155_STATE_MODE) {
> case DT3155_STATE_FLD:
> {
> even_dma_start_r = dt3155_status[minor].
> @@ -487,7 +459,7 @@ static void dt3155_init_isr(int minor)
> csr1_r.fld.FLD_CRPT_EVE = 1; /* writing a 1 clears flags */
> csr1_r.fld.FLD_CRPT_ODD = 1;
>
> - WriteMReg((dt3155_lbase[minor] + CSR1),csr1_r.reg);
> + WriteMReg((dt3155_lbase[minor] + CSR1), csr1_r.reg);
>
> /* Enable interrupts at the end of each field */
>
> @@ -522,102 +494,95 @@ static int dt3155_ioctl(struct inode *inode,
> {
> int minor = MINOR(inode->i_rdev); /* What device are we ioctl()'ing? */
>
> - if (minor >= MAXBOARDS || minor < 0)
> - return -ENODEV;
> + if (minor >= MAXBOARDS || minor < 0)
> + return -ENODEV;
>
> /* make sure it is valid command */
> - if (_IOC_NR(cmd) > DT3155_IOC_MAXNR)
> - {
> - printk("DT3155: invalid IOCTL(0x%x)\n",cmd);
> - printk("DT3155: Valid commands (0x%x), (0x%x), (0x%x), (0x%x), (0x%x)\n",
> - (unsigned int)DT3155_GET_CONFIG,
> - (unsigned int)DT3155_SET_CONFIG,
> - (unsigned int)DT3155_START,
> - (unsigned int)DT3155_STOP,
> - (unsigned int)DT3155_FLUSH);
> - return -EINVAL;
> + if (_IOC_NR(cmd) > DT3155_IOC_MAXNR) {
> + printk("DT3155: invalid IOCTL(0x%x)\n", cmd);
> + printk("DT3155: Valid commands (0x%x), (0x%x), (0x%x), (0x%x), (0x%x)\n",
> + (unsigned int)DT3155_GET_CONFIG,
> + (unsigned int)DT3155_SET_CONFIG,
> + (unsigned int)DT3155_START,
> + (unsigned int)DT3155_STOP,
> + (unsigned int)DT3155_FLUSH);
> + return -EINVAL;
> }
>
> - switch (cmd)
> - {
> + switch (cmd) {
> case DT3155_SET_CONFIG:
> - {
> + {
> if (dt3155_status[minor].state != DT3155_STATE_IDLE)
> - return -EBUSY;
> + return -EBUSY;
>
> {
> - struct dt3155_config tmp;
> - if (copy_from_user((void *)&tmp, (void *) arg, sizeof(tmp)))
> - return -EFAULT;
> - /* check for valid settings */
> - if (tmp.rows > DT3155_MAX_ROWS ||
> - tmp.cols > DT3155_MAX_COLS ||
> - (tmp.acq_mode != DT3155_MODE_FRAME &&
> - tmp.acq_mode != DT3155_MODE_FIELD) ||
> - (tmp.continuous != DT3155_SNAP &&
> - tmp.continuous != DT3155_ACQ))
> - {
> - return -EINVAL;
> + struct dt3155_config tmp;
> + if (copy_from_user((void *)&tmp, (void *) arg, sizeof(tmp)))
> + return -EFAULT;
> + /* check for valid settings */
> + if (tmp.rows > DT3155_MAX_ROWS ||
> + tmp.cols > DT3155_MAX_COLS ||
> + (tmp.acq_mode != DT3155_MODE_FRAME &&
> + tmp.acq_mode != DT3155_MODE_FIELD) ||
> + (tmp.continuous != DT3155_SNAP &&
> + tmp.continuous != DT3155_ACQ)) {
> + return -EINVAL;
> }
> - dt3155_status[minor].config = tmp;
> + dt3155_status[minor].config = tmp;
> }
> return 0;
> }
> case DT3155_GET_CONFIG:
> {
> if (copy_to_user((void *) arg, (void *) &dt3155_status[minor],
> - sizeof(struct dt3155_status)))
> - return -EFAULT;
> + sizeof(struct dt3155_status)))
> + return -EFAULT;
> return 0;
> }
> case DT3155_FLUSH: /* Flushes the buffers -- ensures fresh data */
> {
> if (dt3155_status[minor].state != DT3155_STATE_IDLE)
> - return -EBUSY;
> + return -EBUSY;
> return dt3155_flush(minor);
> }
> case DT3155_STOP:
> {
> if (dt3155_status[minor].state & DT3155_STATE_STOP ||
> dt3155_status[minor].fbuffer.stop_acquire)
> - return -EBUSY;
> + return -EBUSY;
>
> if (dt3155_status[minor].state == DT3155_STATE_IDLE)
> - return 0;
> + return 0;
>
> quick_stop(minor);
> if (copy_to_user((void *) arg, (void *) &dt3155_status[minor],
> - sizeof(struct dt3155_status)))
> - return -EFAULT;
> + sizeof(struct dt3155_status)))
> + return -EFAULT;
> return 0;
> }
> case DT3155_START:
> {
> if (dt3155_status[minor].state != DT3155_STATE_IDLE)
> - return -EBUSY;
> + return -EBUSY;
>
> dt3155_status[minor].fbuffer.stop_acquire = 0;
> dt3155_status[minor].fbuffer.frame_count = 0;
>
> /* Set the MODE in the status -- we default to FRAME */
> if (dt3155_status[minor].config.acq_mode == DT3155_MODE_FIELD)
> - {
> - dt3155_status[minor].state = DT3155_STATE_FLD;
> - }
> + dt3155_status[minor].state = DT3155_STATE_FLD;
> else
> - {
> - dt3155_status[minor].state = DT3155_STATE_FRAME;
> - }
> + dt3155_status[minor].state = DT3155_STATE_FRAME;
>
> dt3155_init_isr(minor);
> if (copy_to_user((void *) arg, (void *) &dt3155_status[minor],
> - sizeof(struct dt3155_status)))
> - return -EFAULT;
> + sizeof(struct dt3155_status)))
> + return -EFAULT;
> return 0;
> }
> default:
> {
> - printk("DT3155: invalid IOCTL(0x%x)\n",cmd);
> + printk("DT3155: invalid IOCTL(0x%x)\n", cmd);
> printk("DT3155: Valid commands (0x%x), (0x%x), (0x%x), (0x%x), (0x%x)\n",
> (unsigned int)DT3155_GET_CONFIG,
> (unsigned int)DT3155_SET_CONFIG,
> @@ -637,38 +602,35 @@ static int dt3155_ioctl(struct inode *inode,
> * It *looks* like it should work but since I'm not
> * sure how to use it, I'm not actually sure. (NJC? ditto by SS)
> *****************************************************/
> -static int dt3155_mmap (struct file * file, struct vm_area_struct * vma)
> +static int dt3155_mmap(struct file *file, struct vm_area_struct *vma)
> {
> /* which device are we mmapping? */
> - int minor = MINOR(file->f_dentry->d_inode->i_rdev);
> - unsigned long offset;
> - offset = vma->vm_pgoff << PAGE_SHIFT;
> + int minor = MINOR(file->f_dentry->d_inode->i_rdev);
> + unsigned long offset;
> + offset = vma->vm_pgoff << PAGE_SHIFT;
>
> - if (offset >= __pa(high_memory) || (file->f_flags & O_SYNC))
> - vma->vm_flags |= VM_IO;
> + if (offset >= __pa(high_memory) || (file->f_flags & O_SYNC))
> + vma->vm_flags |= VM_IO;
>
> /* Don't try to swap out physical pages.. */
> - vma->vm_flags |= VM_RESERVED;
> + vma->vm_flags |= VM_RESERVED;
>
> /* they are mapping the registers or the buffer */
> - if ((offset == dt3155_status[minor].reg_addr &&
> - vma->vm_end - vma->vm_start == PCI_PAGE_SIZE) ||
> - (offset == dt3155_status[minor].mem_addr &&
> - vma->vm_end - vma->vm_start == dt3155_status[minor].mem_size))
> - {
> - if (remap_pfn_range(vma,
> - vma->vm_start,
> - offset >> PAGE_SHIFT,
> - vma->vm_end - vma->vm_start,
> - vma->vm_page_prot)) {
> - printk("DT3155: remap_page_range() failed.\n");
> - return -EAGAIN;
> + if ((offset == dt3155_status[minor].reg_addr &&
> + vma->vm_end - vma->vm_start == PCI_PAGE_SIZE) ||
> + (offset == dt3155_status[minor].mem_addr &&
> + vma->vm_end - vma->vm_start == dt3155_status[minor].mem_size)) {
> + if (remap_pfn_range(vma,
> + vma->vm_start,
> + offset >> PAGE_SHIFT,
> + vma->vm_end - vma->vm_start,
> + vma->vm_page_prot)) {
> + printk("DT3155: remap_page_range() failed.\n");
> + return -EAGAIN;
> }
> - }
> - else
> - {
> - printk("DT3155: dt3155_mmap() bad call.\n");
> - return -ENXIO;
> +} else {
> + printk("DT3155: dt3155_mmap() bad call.\n");
> + return -ENXIO;
> }
>
> return 0;
> @@ -682,40 +644,39 @@ static int dt3155_mmap (struct file * file, struct vm_area_struct * vma)
> * MOD_INC_USE_COUNT make sure that the driver memory is not freed
> * while the device is in use.
> *****************************************************/
> -static int dt3155_open(struct inode* inode, struct file* filep)
> +static int dt3155_open(struct inode *inode, struct file *filep)
> {
> int minor = MINOR(inode->i_rdev); /* what device are we opening? */
> - if (dt3155_dev_open[minor]) {
> - printk ("DT3155: Already opened by another process.\n");
> - return -EBUSY;
> - }
> + if (dt3155_dev_open[minor]) {
> + printk("DT3155: Already opened by another process.\n");
> + return -EBUSY;
> + }
>
> - if (dt3155_status[minor].device_installed==0)
> - {
> - printk("DT3155 Open Error: No such device dt3155 minor number %d\n",
> - minor);
> - return -EIO;
> + if (dt3155_status[minor].device_installed == 0) {
> + printk("DT3155 Open Error: No such device dt3155 minor number %d\n",
> + minor);
> + return -EIO;
> }
>
> - if (dt3155_status[minor].state != DT3155_STATE_IDLE) {
> - printk ("DT3155: Not in idle state (state = %x)\n",
> - dt3155_status[minor].state);
> - return -EBUSY;
> - }
> + if (dt3155_status[minor].state != DT3155_STATE_IDLE) {
> + printk("DT3155: Not in idle state (state = %x)\n",
> + dt3155_status[minor].state);
> + return -EBUSY;
> + }
>
> - printk("DT3155: Device opened.\n");
> + printk("DT3155: Device opened.\n");
>
> - dt3155_dev_open[minor] = 1 ;
> + dt3155_dev_open[minor] = 1 ;
>
> - dt3155_flush(minor);
> + dt3155_flush(minor);
>
> - /* Disable ALL interrupts */
> - int_csr_r.reg = 0;
> - WriteMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
> + /* Disable ALL interrupts */
> + int_csr_r.reg = 0;
> + WriteMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
>
> - init_waitqueue_head(&(dt3155_read_wait_queue[minor]));
> + init_waitqueue_head(&(dt3155_read_wait_queue[minor]));
>
> - return 0;
> + return 0;
> }
>
>
> @@ -727,23 +688,18 @@ static int dt3155_open(struct inode* inode, struct file* filep)
> *****************************************************/
> static int dt3155_close(struct inode *inode, struct file *filep)
> {
> - int minor;
> + int minor;
>
> - minor = MINOR(inode->i_rdev); /* which device are we closing */
> - if (!dt3155_dev_open[minor])
> - {
> - printk("DT3155: attempt to CLOSE a not OPEN device\n");
> - }
> - else
> - {
> - dt3155_dev_open[minor] = 0;
> + minor = MINOR(inode->i_rdev); /* which device are we closing */
> + if (!dt3155_dev_open[minor]) {
> + printk("DT3155: attempt to CLOSE a not OPEN device\n");
> + } else {
> + dt3155_dev_open[minor] = 0;
>
> - if (dt3155_status[minor].state != DT3155_STATE_IDLE)
> - {
> - quick_stop(minor);
> - }
> + if (dt3155_status[minor].state != DT3155_STATE_IDLE)
> + quick_stop(minor);
> }
> - return 0;
> + return 0;
> }
>
> /*****************************************************
> @@ -753,87 +709,82 @@ static int dt3155_close(struct inode *inode, struct file *filep)
> static ssize_t dt3155_read(struct file *filep, char __user *buf,
> size_t count, loff_t *ppos)
> {
> - /* which device are we reading from? */
> - int minor = MINOR(filep->f_dentry->d_inode->i_rdev);
> - u32 offset;
> - int frame_index;
> - struct frame_info *frame_info;
> -
> - /* TODO: this should check the error flag and */
> - /* return an error on hardware failures */
> - if (count != sizeof(struct dt3155_read))
> - {
> - printk("DT3155 ERROR (NJC): count is not right\n");
> - return -EINVAL;
> + /* which device are we reading from? */
> + int minor = MINOR(filep->f_dentry->d_inode->i_rdev);
> + u32 offset;
> + int frame_index;
> + struct frame_info *frame_info;
> +
> + /* TODO: this should check the error flag and */
> + /* return an error on hardware failures */
> + if (count != sizeof(struct dt3155_read)) {
> + printk("DT3155 ERROR (NJC): count is not right\n");
> + return -EINVAL;
> }
>
>
> - /* Hack here -- I'm going to allow reading even when idle.
> - * this is so that the frames can be read after STOP has
> - * been called. Leaving it here, commented out, as a reminder
> - * for a short while to make sure there are no problems.
> - * Note that if the driver is not opened in non_blocking mode,
> - * and the device is idle, then it could sit here forever! */
> + /* Hack here -- I'm going to allow reading even when idle.
> + * this is so that the frames can be read after STOP has
> + * been called. Leaving it here, commented out, as a reminder
> + * for a short while to make sure there are no problems.
> + * Note that if the driver is not opened in non_blocking mode,
> + * and the device is idle, then it could sit here forever! */
>
> - /* if (dt3155_status[minor].state == DT3155_STATE_IDLE)*/
> - /* return -EBUSY;*/
> + /* if (dt3155_status[minor].state == DT3155_STATE_IDLE)*/
> + /* return -EBUSY;*/
>
> - /* non-blocking reads should return if no data */
> - if (filep->f_flags & O_NDELAY)
> - {
> - if ((frame_index = dt3155_get_ready_buffer(minor)) < 0) {
> - /*printk("dt3155: no buffers available (?)\n");*/
> - /* printques(minor); */
> - return -EAGAIN;
> - }
> - }
> - else
> - {
> - /*
> - * sleep till data arrives , or we get interrupted.
> - * Note that wait_event_interruptible() does not actually
> - * sleep/wait if it's condition evaluates to true upon entry.
> - */
> - wait_event_interruptible(dt3155_read_wait_queue[minor],
> - (frame_index = dt3155_get_ready_buffer(minor))
> - >= 0);
> -
> - if (frame_index < 0)
> - {
> - printk ("DT3155: read: interrupted\n");
> - quick_stop (minor);
> - printques(minor);
> - return -EINTR;
> + /* non-blocking reads should return if no data */
> + if (filep->f_flags & O_NDELAY) {
> + if ((frame_index = dt3155_get_ready_buffer(minor)) < 0) {
> + /*printk("dt3155: no buffers available (?)\n");*/
> + /* printques(minor); */
> + return -EAGAIN;
> + }
> + } else {
> + /*
> + * sleep till data arrives , or we get interrupted.
> + * Note that wait_event_interruptible() does not actually
> + * sleep/wait if it's condition evaluates to true upon entry.
> + */
> + wait_event_interruptible(dt3155_read_wait_queue[minor],
> + (frame_index = dt3155_get_ready_buffer(minor))
> + >= 0);
> +
> + if (frame_index < 0) {
> + printk("DT3155: read: interrupted\n");
> + quick_stop(minor);
> + printques(minor);
> + return -EINTR;
> }
> }
>
> - frame_info = &dt3155_status[minor].fbuffer.frame_info[frame_index];
> + frame_info = &dt3155_status[minor].fbuffer.frame_info[frame_index];
>
> - /* make this an offset */
> - offset = frame_info->addr - dt3155_status[minor].mem_addr;
> + /* make this an offset */
> + offset = frame_info->addr - dt3155_status[minor].mem_addr;
>
> - put_user(offset, (unsigned int *) buf);
> - buf += sizeof(u32);
> - put_user(dt3155_status[minor].fbuffer.frame_count, (unsigned int *) buf);
> - buf += sizeof(u32);
> - put_user(dt3155_status[minor].state, (unsigned int *) buf);
> - buf += sizeof(u32);
> - if (copy_to_user(buf, frame_info, sizeof(*frame_info)))
> - return -EFAULT;
> + put_user(offset, (unsigned int *) buf);
> + buf += sizeof(u32);
> + put_user(dt3155_status[minor].fbuffer.frame_count, (unsigned int *) buf);
> + buf += sizeof(u32);
> + put_user(dt3155_status[minor].state, (unsigned int *) buf);
> + buf += sizeof(u32);
> + if (copy_to_user(buf, frame_info, sizeof(*frame_info)))
> + return -EFAULT;
>
> - return sizeof(struct dt3155_read);
> + return sizeof(struct dt3155_read);
> }
>
> -static unsigned int dt3155_poll (struct file * filp, poll_table *wait)
> +static unsigned int dt3155_poll(struct file *filp, poll_table *wait)
> {
> - int minor = MINOR(filp->f_dentry->d_inode->i_rdev);
> + int minor = MINOR(filp->f_dentry->d_inode->i_rdev);
>
> - if (!is_ready_buf_empty(minor))
> - return POLLIN | POLLRDNORM;
> + if (!is_ready_buf_empty(minor))
> + return POLLIN | POLLRDNORM;
>
> - poll_wait (filp, &dt3155_read_wait_queue[minor], wait);
> + poll_wait(filp, &dt3155_read_wait_queue[minor], wait);
>
> - return 0;
> + return 0;
> }
>
> static long
> @@ -868,72 +819,68 @@ static struct file_operations dt3155_fops = {
> *
> * PCI has been totally reworked in 2.1..
> *****************************************************/
> -static int find_PCI (void)
> +static int find_PCI(void)
> {
> - struct pci_dev *pci_dev = NULL;
> - int error, pci_index = 0;
> - unsigned short rev_device;
> - unsigned long base;
> - unsigned char irq;
> -
> - while ((pci_dev = pci_get_device
> - (DT3155_VENDORID, DT3155_DEVICEID, pci_dev)) != NULL)
> - {
> - pci_index ++;
> -
> - /* Is it really there? */
> - if ((error =
> - pci_read_config_word(pci_dev, PCI_CLASS_DEVICE, &rev_device)))
> - continue;
> -
> - /* Found a board */
> - DT_3155_DEBUG_MSG("DT3155: Device number %d \n", pci_index);
> -
> - /* Make sure the driver was compiled with enough buffers to handle
> - this many boards */
> - if (pci_index > MAXBOARDS) {
> - printk("DT3155: ERROR - found %d devices, but driver only configured "
> - "for %d devices\n"
> - "DT3155: Please change MAXBOARDS in dt3155.h\n",
> - pci_index, MAXBOARDS);
> - goto err;
> - }
> + struct pci_dev *pci_dev = NULL;
> + int error, pci_index = 0;
> + unsigned short rev_device;
> + unsigned long base;
> + unsigned char irq;
> +
> + while ((pci_dev = pci_get_device
> + (DT3155_VENDORID, DT3155_DEVICEID, pci_dev)) != NULL) {
> + pci_index++;
> +
> + /* Is it really there? */
> + if ((error =
> + pci_read_config_word(pci_dev, PCI_CLASS_DEVICE, &rev_device)))
> + continue;
> +
> + /* Found a board */
> + DT_3155_DEBUG_MSG("DT3155: Device number %d\n", pci_index);
> +
> + /* Make sure the driver was compiled with enough buffers to handle
> + this many boards */
> + if (pci_index > MAXBOARDS) {
> + printk("DT3155: ERROR - found %d devices, but driver "
> + "only configured for %d devices\n"
> + "DT3155: Please change MAXBOARDS in dt3155.h\n",
> + pci_index, MAXBOARDS);
> + goto err;
> + }
>
> /* Now, just go out and make sure that this/these device(s) is/are
> actually mapped into the kernel address space */
> - if ((error = pci_read_config_dword(pci_dev, PCI_BASE_ADDRESS_0,
> - (u32 *) &base)))
> - {
> - printk("DT3155: Was not able to find device \n");
> - goto err;
> + if ((error = pci_read_config_dword(pci_dev, PCI_BASE_ADDRESS_0,
> + (u32 *) &base))) {
> + printk("DT3155: Was not able to find device\n");
> + goto err;
> }
>
> - DT_3155_DEBUG_MSG("DT3155: Base address 0 for device is %lx \n", base);
> - dt3155_status[pci_index-1].reg_addr = base;
> + DT_3155_DEBUG_MSG("DT3155: Base address 0 for device is %lx\n", base);
> + dt3155_status[pci_index-1].reg_addr = base;
>
> - /* Remap the base address to a logical address through which we
> - * can access it. */
> - dt3155_lbase[pci_index - 1] = ioremap(base,PCI_PAGE_SIZE);
> - dt3155_status[pci_index - 1].reg_addr = base;
> - DT_3155_DEBUG_MSG("DT3155: New logical address is %p \n",
> + /* Remap the base address to a logical address through which we
> + * can access it. */
> + dt3155_lbase[pci_index - 1] = ioremap(base, PCI_PAGE_SIZE);
> + dt3155_status[pci_index - 1].reg_addr = base;
> + DT_3155_DEBUG_MSG("DT3155: New logical address is %p\n",
> dt3155_lbase[pci_index-1]);
> - if (!dt3155_lbase[pci_index-1])
> - {
> - printk("DT3155: Unable to remap control registers\n");
> - goto err;
> + if (!dt3155_lbase[pci_index-1]) {
> + printk("DT3155: Unable to remap control registers\n");
> + goto err;
> }
>
> - if ((error = pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &irq)))
> - {
> - printk("DT3155: Was not able to find device \n");
> - goto err;
> + if ((error = pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &irq))) {
> + printk("DT3155: Was not able to find device\n");
> + goto err;
> }
>
> - DT_3155_DEBUG_MSG("DT3155: IRQ is %d \n",irq);
> - dt3155_status[pci_index-1].irq = irq;
> - /* Set flag: kth device found! */
> - dt3155_status[pci_index-1].device_installed = 1;
> - printk("DT3155: Installing device %d w/irq %d and address %p\n",
> + DT_3155_DEBUG_MSG("DT3155: IRQ is %d\n", irq);
> + dt3155_status[pci_index-1].irq = irq;
> + /* Set flag: kth device found! */
> + dt3155_status[pci_index-1].device_installed = 1;
> + printk("DT3155: Installing device %d w/irq %d and address %p\n",
> pci_index,
> dt3155_status[pci_index-1].irq,
> dt3155_lbase[pci_index-1]);
> @@ -955,78 +902,73 @@ u32 allocatorAddr = 0;
> *****************************************************/
> int init_module(void)
> {
> - int index;
> - int rcode = 0;
> - char *devname[MAXBOARDS];
> + int index;
> + int rcode = 0;
> + char *devname[MAXBOARDS];
>
> - devname[0] = "dt3155a";
> + devname[0] = "dt3155a";
> #if MAXBOARDS == 2
> - devname[1] = "dt3155b";
> + devname[1] = "dt3155b";
> #endif
>
> - printk("DT3155: Loading module...\n");
> + printk("DT3155: Loading module...\n");
>
> - /* Register the device driver */
> - rcode = register_chrdev(dt3155_major, "dt3155", &dt3155_fops);
> - if(rcode < 0)
> - {
> - printk(KERN_INFO "DT3155: register_chrdev failed \n");
> - return rcode;
> + /* Register the device driver */
> + rcode = register_chrdev(dt3155_major, "dt3155", &dt3155_fops);
> + if (rcode < 0) {
> + printk(KERN_INFO "DT3155: register_chrdev failed\n");
> + return rcode;
> }
>
> - if(dt3155_major == 0)
> - dt3155_major = rcode; /* dynamic */
> -
> -
> - /* init the status variables. */
> - /* DMA memory is taken care of in setup_buffers() */
> - for (index = 0; index < MAXBOARDS; index++)
> - {
> - dt3155_status[index].config.acq_mode = DT3155_MODE_FRAME;
> - dt3155_status[index].config.continuous = DT3155_ACQ;
> - dt3155_status[index].config.cols = DT3155_MAX_COLS;
> - dt3155_status[index].config.rows = DT3155_MAX_ROWS;
> - dt3155_status[index].state = DT3155_STATE_IDLE;
> -
> - /* find_PCI() will check if devices are installed; */
> - /* first assume they're not: */
> - dt3155_status[index].mem_addr = 0;
> - dt3155_status[index].mem_size = 0;
> - dt3155_status[index].state = DT3155_STATE_IDLE;
> - dt3155_status[index].device_installed = 0;
> + if (dt3155_major == 0)
> + dt3155_major = rcode; /* dynamic */
> +
> +
> + /* init the status variables. */
> + /* DMA memory is taken care of in setup_buffers() */
> + for (index = 0; index < MAXBOARDS; index++) {
> + dt3155_status[index].config.acq_mode = DT3155_MODE_FRAME;
> + dt3155_status[index].config.continuous = DT3155_ACQ;
> + dt3155_status[index].config.cols = DT3155_MAX_COLS;
> + dt3155_status[index].config.rows = DT3155_MAX_ROWS;
> + dt3155_status[index].state = DT3155_STATE_IDLE;
> +
> + /* find_PCI() will check if devices are installed; */
> + /* first assume they're not: */
> + dt3155_status[index].mem_addr = 0;
> + dt3155_status[index].mem_size = 0;
> + dt3155_status[index].state = DT3155_STATE_IDLE;
> + dt3155_status[index].device_installed = 0;
> }
>
> - /* Now let's find the hardware. find_PCI() will set ndevices to the
> - * number of cards found in this machine. */
> + /* Now let's find the hardware. find_PCI() will set ndevices to the
> + * number of cards found in this machine. */
> {
> - if ((rcode = find_PCI()) != DT_3155_SUCCESS)
> - {
> - printk("DT3155 error: find_PCI() failed to find dt3155 board(s)\n");
> - unregister_chrdev(dt3155_major, "dt3155");
> - return rcode;
> - }
> + if ((rcode = find_PCI()) != DT_3155_SUCCESS) {
> + printk("DT3155 error: find_PCI() failed to find dt3155 board(s)\n");
> + unregister_chrdev(dt3155_major, "dt3155");
> + return rcode;
> + }
> }
>
> - /* Ok, time to setup the frame buffers */
> - if((rcode = dt3155_setup_buffers(&allocatorAddr)) < 0)
> - {
> - printk("DT3155: Error: setting up buffer not large enough.");
> - unregister_chrdev(dt3155_major, "dt3155");
> - return rcode;
> + /* Ok, time to setup the frame buffers */
> + if ((rcode = dt3155_setup_buffers(&allocatorAddr)) < 0) {
> + printk("DT3155: Error: setting up buffer not large enough.");
> + unregister_chrdev(dt3155_major, "dt3155");
> + return rcode;
> }
>
> /* If we are this far, then there is enough RAM */
> /* for the buffers: Print the configuration. */
> - for( index = 0; index < ndevices; index++)
> - {
> - printk("DT3155: Device = %d; acq_mode = %d; "
> + for (index = 0; index < ndevices; index++) {
> + printk("DT3155: Device = %d; acq_mode = %d; "
> "continuous = %d; cols = %d; rows = %d;\n",
> - index ,
> + index,
> dt3155_status[index].config.acq_mode,
> dt3155_status[index].config.continuous,
> dt3155_status[index].config.cols,
> dt3155_status[index].config.rows);
> - printk("DT3155: m_addr = 0x%x; m_size = %ld; "
> + printk("DT3155: m_addr = 0x%x; m_size = %ld; "
> "state = %d; device_installed = %d\n",
> dt3155_status[index].mem_addr,
> (long int)dt3155_status[index].mem_size,
> @@ -1034,30 +976,27 @@ int init_module(void)
> dt3155_status[index].device_installed);
> }
>
> - /* Disable ALL interrupts */
> - int_csr_r.reg = 0;
> - for( index = 0; index < ndevices; index++)
> - {
> - WriteMReg((dt3155_lbase[index] + INT_CSR), int_csr_r.reg);
> - if(dt3155_status[index].device_installed)
> - {
> - /*
> - * This driver *looks* like it can handle sharing interrupts,
> - * but I can't actually test myself. I've had reports that it
> - * DOES work so I'll enable it for now. This comment will remain
> - * as a reminder in case any problems arise. (SS)
> - */
> - /* in older kernels flags are: SA_SHIRQ | SA_INTERRUPT */
> - rcode = request_irq(dt3155_status[index].irq, (void *)dt3155_isr,
> - IRQF_SHARED | IRQF_DISABLED, devname[index],
> - (void*) &dt3155_status[index]);
> - if(rcode < 0)
> - {
> - printk("DT3155: minor %d request_irq failed for IRQ %d\n",
> - index, dt3155_status[index].irq);
> - unregister_chrdev(dt3155_major, "dt3155");
> - return rcode;
> - }
> + /* Disable ALL interrupts */
> + int_csr_r.reg = 0;
> + for (index = 0; index < ndevices; index++) {
> + WriteMReg((dt3155_lbase[index] + INT_CSR), int_csr_r.reg);
> + if (dt3155_status[index].device_installed) {
> + /*
> + * This driver *looks* like it can handle sharing interrupts,
> + * but I can't actually test myself. I've had reports that it
> + * DOES work so I'll enable it for now. This comment will remain
> + * as a reminder in case any problems arise. (SS)
> + */
> + /* in older kernels flags are: SA_SHIRQ | SA_INTERRUPT */
> + rcode = request_irq(dt3155_status[index].irq,
> + (void *)dt3155_isr, IRQF_SHARED | IRQF_DISABLED, devname[index],
> + (void *) &dt3155_status[index]);
> + if (rcode < 0) {
> + printk("DT3155: minor %d request_irq failed for"
> + "IRQ %d\n", index, dt3155_status[index].irq);
> + unregister_chrdev(dt3155_major, "dt3155");
> + return rcode;
> + }
> }
> }
>
> @@ -1072,27 +1011,26 @@ int init_module(void)
> *****************************************************/
> void cleanup_module(void)
> {
> - int index;
> + int index;
>
> - printk("DT3155: cleanup_module called\n");
> + printk("DT3155: cleanup_module called\n");
>
> /* removed DMA allocated with the allocator */
> #ifdef STANDALONE_ALLOCATOR
> - if (allocatorAddr != 0)
> - allocator_free_dma(allocatorAddr);
> + if (allocatorAddr != 0)
> + allocator_free_dma(allocatorAddr);
> #else
> - allocator_cleanup();
> + allocator_cleanup();
> #endif
>
> - unregister_chrdev(dt3155_major, "dt3155");
> + unregister_chrdev(dt3155_major, "dt3155");
>
> - for(index = 0; index < ndevices; index++)
> - {
> - if(dt3155_status[index].device_installed == 1)
> - {
> - printk("DT3155: Freeing irq %d for device %d\n",
> - dt3155_status[index].irq, index);
> - free_irq(dt3155_status[index].irq, (void*)&dt3155_status[index]);
> + for (index = 0; index < ndevices; index++) {
> + if (dt3155_status[index].device_installed == 1) {
> + printk("DT3155: Freeing irq %d for device %d\n",
> + dt3155_status[index].irq, index);
> + free_irq(dt3155_status[index].irq,
> + (void *)&dt3155_status[index]);
> }
> }
> }

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Giangiacomo Mariotti: "Re: BTRFS: Unbelievably slow with kvm/qemu"
Previous message: Yong Zhang: "Re: [PATCH] workqueue: fix locking in retry path ofmaybe_create_worker()"
In reply to: Gorskin Ilya: "[PATCH] Staging:dt3155: fix code style generated by checkpatch.pl in dt3155_drv.c."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]