Re: [PATCH v2] x86: Early-boot serial I/O support

[H. Peter Anvin]

On 07/10/2010 02:17 PM, Pekka Enberg wrote:
> Hi!
> 
> On Sat, Jul 10, 2010 at 11:49 PM, Yinghai Lu <yinghai@xxxxxxxxxx> wrote:
>> can you analyze "console=uart8250,io,0x3f8,115200n8" instead?
>>
>> that is equal to "earlyprintk=ttyS0,115200 console=ttyS0,115200"
>>
>> so we only use one for all.
>>
>> also like to kill earlyprintk=ttyS0,115200 to favor earlycon
> 
> hpa, what's your take on this?
> 
> The 'console' variant seems overly complicated to me. We can add it
> but we also need to check for 'earlyprintk' as long as it's supported
> by the kernel.
> 

earlyprintk= seems to be preferred over console= these days.  Quite
frankly it's idiotic to have the user enter as many low-level details as
one has to do for the console= one.

Now, as for the I/O base, the I/O base for legacy serial ports are
available from a 4-element u16 array starting at absolute address 0x400.
 I don't think Linux currently examines that array -- instead relying on
the hard-coded values 0x3f8, 0x2f8, 0x3e8, 0x2e8 -- but it might
something to consider for the future.  However, we should match the
serial port subsystem there, of course.

	-hpa

-- 
H. Peter Anvin, Intel Open Source Technology Center
I work for Intel.  I don't speak on their behalf.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/