USB mass storage fails to register on kernel 2.6.32

From: Paul Sheer
Date: Sun Jul 04 2010 - 04:24:10 EST



Hi there,

I have a Samsung Story external USB-2.0 1.5TB drive that fails to
detect as a device in more recent kernel versions. Full kmsg details
are below. Note that a USB thumb drive works fine on my system.
Older kernels work fine with the Samsung also. In terms of which
version of the kernel this stopped working, this I don't know.


uname -a gives:

Linux version 2.6.32-23-generic (buildd@rothera) (gcc version
4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #37-Ubuntu SMP Fri Jun 11
07:54:58 UTC 2010



My kmsg output when plugging in the drive is as follows:


<6>[ 244.624034] usb 1-10: new high speed USB device using ehci_hcd
and address 3
<3>[ 244.780033] usb 1-10: device descriptor read/64, error -32
<3>[ 245.036030] usb 1-10: device descriptor read/64, error -32
<6>[ 245.252038] usb 1-10: new high speed USB device using ehci_hcd
and address 4
<3>[ 245.862496] usb 1-10: unable to read config index 0
descriptor/start: -71
<3>[ 245.862615] usb 1-10: chopping to 0 config(s)
<3>[ 245.979496] usb 1-10: string descriptor 0 read error: -71
<4>[ 245.980413] usb 1-10: no configuration chosen from 0 choices




When plugging in my thumb drive I get the expected results:


<6>[ 135.216034] usb 1-10: new high speed USB device using ehci_hcd
and address 2
<6>[ 135.352726] usb 1-10: configuration #1 chosen from 1 choice
<6>[ 135.410021] Initializing USB Mass Storage driver...
<6>[ 135.410186] scsi6 : SCSI emulation for USB Mass Storage
devices
<6>[ 135.410460] usbcore: registered new interface driver
usb-storage
<6>[ 135.410466] USB Mass Storage support registered.
<7>[ 135.414677] usb-storage: device found at 2
<7>[ 135.414682] usb-storage: waiting for device to settle before
scanning
<7>[ 140.412291] usb-storage: device scan complete
<5>[ 140.414270] scsi 6:0:0:0: Direct-Access USB Flash
Disk 1100 PQ: 0 ANSI: 0 CCS
<5>[ 140.417527] sd 6:0:0:0: Attached scsi generic sg3 type 0
<5>[ 140.419744] sd 6:0:0:0: [sdc] 1014784 512-byte logical blocks:
(519 MB/495 MiB)
<5>[ 140.424490] sd 6:0:0:0: [sdc] Write Protect is off
<7>[ 140.424500] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
<3>[ 140.424506] sd 6:0:0:0: [sdc] Assuming drive cache: write
through
<3>[ 140.428511] sd 6:0:0:0: [sdc] Assuming drive cache: write
through
<6>[ 140.428631] sdc: sdc1
<3>[ 140.494141] sd 6:0:0:0: [sdc] Assuming drive cache: write
through
<5>[ 140.494261] sd 6:0:0:0: [sdc] Attached SCSI removable disk




usb-devices output is as follows:


T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh=10
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=02.06
S: Manufacturer=Linux 2.6.32-23-generic ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:02.1
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub

T: Bus=01 Lev=01 Prnt=01 Port=09 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 0
P: Vendor=04e8 ProdID=5f06 Rev=00.00
S: Manufacturer=JMicron
S: SerialNumber=0000002CE09310500626
C: #Ifs= 0 Cfg#= 0 Atr= MxPwr=
cat: /sys/bus/usb/devices/usb1/1-10/1-*:?.*/bInterfaceNumber: No
such file or directory
cat: /sys/bus/usb/devices/usb1/1-10/1-*:?.*/bAlternateSetting: No
such file or directory
cat: /sys/bus/usb/devices/usb1/1-10/1-*:?.*/bNumEndpoints: No such
file or directory
cat: /sys/bus/usb/devices/usb1/1-10/1-*:?.*/bInterfaceClass: No such
file or directory
cat: /sys/bus/usb/devices/usb1/1-10/1-*:?.*/bInterfaceSubClass: No
such file or directory
cat: /sys/bus/usb/devices/usb1/1-10/1-*:?.*/bInterfaceProtocol: No
such file or directory
/usr/bin/usb-devices: line 79: printf: (none): invalid number
I: If#= 0 Alt= 0 #EPs= 0 Cls=() Sub= Prot= Driver=

T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=10
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev=02.06
S: Manufacturer=Linux 2.6.32-23-generic ohci_hcd
S: Product=OHCI Host Controller
S: SerialNumber=0000:00:02.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub


I think this might be a related problem:


http://quantan.blogspot.com/2010/03/ubuntu-1004-lts-b1-dan-usb-modem-gsm.html


I will be unsubscribing from these lists after sending this bug
report, so please contact me directly if you need more info at
paulsheer at gmail


-paul





--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/