Re: e1000e: receives no packets after resume (2.6.35-rc3-00262-g984bc96)

[Jeff Kirsher]

On Fri, Jul 2, 2010 at 00:28, Nico Schottelius
<nico-linux-20100702@xxxxxxxxxxxxxxx> wrote:
> Good morning hackers,
>
> I've seen that in kernels before, but now suffering from it:
> e1000e does not receive any packets after third resume:
>
> --------------------------------------------------------------------------------
> [8:16] kr:clyde# dhcpcd eth0
> dhcpcd[11589]: version 5.2.5 starting
> dhcpcd[11589]: eth0: rebinding lease of 129.132.102.115
> dhcpcd[11589]: eth0: broadcasting for a lease
> ^Cdhcpcd[11589]: received SIGINT, stopping
> dhcpcd[11589]: eth0: removing interface
> [8:16] kr:clyde# dhcpcd eth0
> dhcpcd[11601]: version 5.2.5 starting
> dhcpcd[11601]: eth0: rebinding lease of 129.132.102.115
> dhcpcd[11601]: eth0: broadcasting for a lease
> ^Cdhcpcd[11601]: received SIGINT, stopping
> dhcpcd[11601]: eth0: removing interface
> [8:16] kr:clyde# dhcpcd eth0
> dhcpcd[11784]: version 5.2.5 starting
> dhcpcd[11784]: eth0: rebinding lease of 129.132.102.115
> ^Cdhcpcd[11784]: received SIGINT, stopping
> dhcpcd[11784]: eth0: removing interface
> [8:16] kr:clyde# dhcpcd eth0
> dhcpcd[11830]: version 5.2.5 starting
> dhcpcd[11830]: eth0: rebinding lease of 129.132.102.115
> dhcpcd[11830]: eth0: broadcasting for a lease
> dhcpcd[11830]: timed out
> [8:17] kr:clyde# rmmod e1000e
> [8:18] kr:clyde# modprobe e1000e
> [8:18] kr:clyde# dhcpcd eth0
> dhcpcd[11855]: version 5.2.5 starting
> dhcpcd[11855]: eth0: waiting for carrier
> ^Cdhcpcd[11855]: received SIGINT, stopping
> dhcpcd[11855]: eth0: removing interface
> [8:18] kr:clyde# dhcpcd eth0
> dhcpcd[11871]: version 5.2.5 starting
> dhcpcd[11871]: eth0: rebinding lease of 129.132.102.115
> dhcpcd[11871]: eth0: acknowledged 129.132.102.115 from 129.132.57.97
> dhcpcd[11871]: eth0: checking for 129.132.102.115
> dhcpcd[11871]: eth0: leased 129.132.102.115 for 86400 seconds
> dhcpcd[11871]: forked to background, child pid 11892
> [8:18] kr:clyde#
> --------------------------------------------------------------------------------
>
> Are you aware of this issues?
>
> Cheers,
>
> Nico
>
> --

Adding the Networking Kernel mailing list (netdev) and Intel Linux LAN
Driver mailing list (e1000-patches)...

Would it be possible to get more information about the system/setup?

For example, can you provide the following information:
     - full lspci output (lspci -vvv)
     - ethtool -i ethX
     - dmesg  - after loading the driver and configuring the interfaces
     - kernel config

-- 
Cheers,
Jeff
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/