2.6.35-rc2,3 -- Problem with PS2 keyboard and mouse driver
From: werner
Date: Wed Jun 30 2010 - 11:21:06 EST
2.6.35-rc2,3,3-git1 -- Problem with PS2 keyboard and mouse driver
Since 2.6.35-rc2 the USB keyboard driver don't work longer, on different mainboards and keyboards.
On 2.6.35-rc1 things still were (more or less) normal.
On -rc2 , the computer still bootet, but in text mode were wroten wrong symbols on the screen, during keyboard use.
On -rc3 the boot crashed. snapshot added.
On 2.6.35-rc3-git1 the boot don't crash, but at the end the computer stops without accepting any keyboard or mouse command (but the cursor still blinks). The same if booting in text mode, or in grafic mode. Reboot necessary.
Below is the syslog. I tried several times to boot with 2.6.35-rc3-git1 , always it stopped. Before I was using (normally) 2.6.26.2 , and the last boot/syslog is from 2.6.26.2 too, returning to the normal use.
Werner Landgraf
werner@xxxxxxxxxxxxxxxx
1 screen picture / crash with 2.6.35-rc3 enclosed
===========================
Jun 28 21:39:14 werner kernel: Malformed early option 'acpi'
Jun 28 21:39:14 werner kernel: ACPI: RSDP 000fb9f0 00024 (v02 ACPIAM)
Jun 28 21:39:14 werner kernel: ACPI: XSDT affc0100 0004C (v01 A_M_I_ OEMXSDT 01000715 MSFT 00000097)
Jun 28 21:39:14 werner kernel: ACPI: FACP affc0290 000F4 (v03 A_M_I_ OEMFACP 01000715 MSFT 00000097)
Jun 28 21:39:14 werner kernel: ACPI: DSDT affc0440 04DAE (v01 A0647 A0647000 00000000 INTL 02002026)
Jun 28 21:39:14 werner kernel: ACPI: FACS affce000 00040
Jun 28 21:39:14 werner kernel: ACPI: APIC affc0390 00070 (v01 A_M_I_ OEMAPIC 01000715 MSFT 00000097)
Jun 28 21:39:14 werner kernel: ACPI: MCFG affc0400 0003C (v01 A_M_I_ OEMMCFG 01000715 MSFT 00000097)
Jun 28 21:39:14 werner kernel: ACPI: OEMB affce040 00060 (v01 A_M_I_ AMI_OEM 01000715 MSFT 00000097)
Jun 28 21:39:14 werner kernel: ACPI: HPET affc51f0 00038 (v01 A_M_I_ OEMHPET0 01000715 MSFT 00000097)
Jun 28 21:39:14 werner kernel: Zone PFN ranges:
Jun 28 21:39:14 werner kernel: DMA 0x00000010 -> 0x00001000
Jun 28 21:39:14 werner kernel: Normal 0x00001000 -> 0x000377fe
Jun 28 21:39:14 werner kernel: HighMem 0x000377fe -> 0x000affc0
Jun 28 21:39:14 werner kernel: Movable zone start PFN for each node
Jun 28 21:39:14 werner kernel: early_node_map[2] active PFN ranges
Jun 28 21:39:14 werner kernel: 0: 0x00000010 -> 0x0000009f
Jun 28 21:39:14 werner kernel: 0: 0x00000100 -> 0x000affc0
Jun 28 21:39:14 werner kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 715087
Jun 28 21:39:14 werner kernel: Console: colour dummy device 80x25
Jun 28 21:39:14 werner kernel: Fast TSC calibration using PIT
Jun 28 21:39:14 werner kernel: Detected 2410.925 MHz processor.
Jun 28 21:39:14 werner kernel: Mount-cache hash table entries: 512
Jun 28 21:39:14 werner kernel: AMD PMU driver.
Jun 28 21:39:14 werner kernel: ACPI: setting ELCR to 0200 (from 8c00)
Jun 28 21:39:14 werner kernel: bio: create slab <bio-0> at 0
Jun 28 21:39:14 werner kernel: ACPI: Executed 1 blocks of module-level executable AML code
Jun 28 21:39:14 werner kernel: ACPI Warning: Incorrect checksum in table [OEMB] - 0xF8, should be 0xEB (20100428/tbutils-314)
Jun 28 21:39:14 werner kernel: raid6: int32x1 617 MB/s
Jun 28 21:39:14 werner kernel: raid6: int32x2 832 MB/s
Jun 28 21:39:14 werner kernel: raid6: int32x4 691 MB/s
Jun 28 21:39:14 werner kernel: raid6: int32x8 523 MB/s
Jun 28 21:39:14 werner kernel: raid6: mmxx1 1937 MB/s
Jun 28 21:39:14 werner kernel: raid6: mmxx2 3570 MB/s
Jun 28 21:39:14 werner kernel: raid6: sse1x1 1894 MB/s
Jun 28 21:39:14 werner kernel: raid6: sse1x2 2949 MB/s
Jun 28 21:39:14 werner kernel: raid6: sse2x1 3246 MB/s
Jun 28 21:39:14 werner kernel: raid6: sse2x2 4308 MB/s
Jun 28 21:39:14 werner kernel: raid6: using algorithm sse2x2 (4308 MB/s)
Jun 28 21:39:14 werner kernel: microcode: microcode: CPU0: AMD CPU family 0xf not supported
Jun 28 21:39:14 werner kernel: highmem bounce pool size: 64 pages
Jun 28 21:39:14 werner kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jun 28 21:39:14 werner kernel: DLM (built Jun 28 2010 02:54:36) installed
Jun 28 21:39:14 werner kernel: EFS: 1.0a - http://aeschi.ch.eu.org/efs/
Jun 28 21:39:14 werner kernel: OCFS2 User DLM kernel interface loaded
Jun 28 21:39:14 werner kernel: GFS2 (built Jun 28 2010 02:55:48) installed
Jun 28 21:39:14 werner kernel: acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
Jun 28 21:39:14 werner kernel: mdacon: MDA with 8K of memory detected.
Jun 28 21:39:14 werner kernel: Console: switching consoles 13-16 to MDA-2
Jun 28 21:39:14 werner kernel: ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 11
Jun 28 21:39:14 werner kernel: nvidiafb: CRTC0 analog found
Jun 28 21:39:14 werner kernel: nvidiafb: CRTC1 analog not found
Jun 28 21:39:14 werner kernel: i2c i2c-0: unable to read EDID block.
Jun 28 21:39:14 werner last message repeated 2 times
Jun 28 21:39:14 werner kernel: nvidiafb: EDID found from BUS2
Jun 28 21:39:14 werner kernel: nvidiafb: CRTC 0 appears to have a CRT attached
Jun 28 21:39:14 werner kernel: nvidiafb: Using CRT on CRTC 0
Jun 28 21:39:14 werner kernel: Console: switching to colour frame buffer device 210x65
Jun 28 21:39:14 werner kernel: Could not find Carillo Ranch MCH device.
Jun 28 21:39:14 werner kernel: no IO addresses supplied
Jun 28 21:39:14 werner kernel: hgafb: probe of hgafb.0 failed with error -22
Jun 28 21:39:14 werner kernel: uvesafb: failed to execute /sbin/v86d
Jun 28 21:39:14 werner kernel: uvesafb: make sure that the v86d helper is installed and executable
Jun 28 21:39:14 werner kernel: uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
Jun 28 21:39:14 werner kernel: uvesafb: vbe_init() failed with -22
Jun 28 21:39:14 werner kernel: uvesafb: probe of uvesafb.0 failed with error -22
Jun 28 21:39:14 werner kernel: vesafb: cannot reserve video memory at 0xc0000000
Jun 28 21:39:14 werner kernel: ERST: Table is not found!
Jun 28 21:39:14 werner kernel: toshiba: not a supported Toshiba laptop
Jun 28 21:39:14 werner kernel: Compaq SMART2 Driver (v 2.6.0)
Jun 28 21:39:14 werner kernel: hda3: <minix: hda5 hda6 hda7 >
Jun 28 21:39:14 werner kernel: Loading Adaptec I2O RAID: Version 2.4 Build 5go
Jun 28 21:39:14 werner kernel: scsi: <fdomain> Detection failed (no card)
Jun 28 21:39:14 werner kernel: NCR53c406a: no available ports found
Jun 28 21:39:14 werner kernel: Emulex LightPulse Fibre Channel SCSI driver 8.3.12
Jun 28 21:39:14 werner kernel: Copyright(c) 2004-2009 Emulex. All rights reserved.
Jun 28 21:39:14 werner kernel: Failed initialization of WD-7000 SCSI card!
Jun 28 21:39:14 werner kernel: GDT-HA: Storage RAID Controller Driver. Version: 3.05
Jun 28 21:39:14 werner kernel: 3ware Storage Controller device driver for Linux v1.26.02.003.
Jun 28 21:39:14 werner kernel: 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
Jun 28 21:39:14 werner kernel: imm: Version 2.05 (for Linux 2.4.0)
Jun 28 21:39:14 werner kernel: ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 15
Jun 28 21:39:14 werner kernel: Error: Driver 'pata_platform' is already registered, aborting...
Jun 28 21:39:14 werner kernel: mtdoops: mtd device (mtddev=name/number) must be supplied
Jun 28 21:39:14 werner kernel: physmap-flash.0: failed to claim resource 0
Jun 28 21:39:14 werner kernel: Failed to ioremap_nocache
Jun 28 21:39:14 werner last message repeated 2 times
Jun 28 21:39:14 werner kernel: SNAPGEAR: failed to ioremap() BOOTCS
Jun 28 21:39:14 werner kernel: Generic platform RAM MTD, (c) 2004 Simtec Electronics
Jun 28 21:39:14 werner kernel: [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
Jun 28 21:39:14 werner last message repeated 5 times
Jun 28 21:39:14 werner kernel: flash size: 8 MiB
Jun 28 21:39:14 werner kernel: page size: 512 bytes
Jun 28 21:39:14 werner kernel: OOB area size: 16 bytes
Jun 28 21:39:14 werner kernel: sector size: 8 KiB
Jun 28 21:39:14 werner kernel: pages number: 16384
Jun 28 21:39:14 werner kernel: pages per sector: 16
Jun 28 21:39:14 werner kernel: bus width: 8
Jun 28 21:39:14 werner kernel: bits in sector size: 13
Jun 28 21:39:14 werner kernel: bits in page size: 9
Jun 28 21:39:14 werner kernel: bits in OOB size: 4
Jun 28 21:39:14 werner kernel: flash size with OOB: 8448 KiB
Jun 28 21:39:14 werner kernel: page address bytes: 3
Jun 28 21:39:14 werner kernel: sector address bytes: 2
Jun 28 21:39:14 werner kernel: options: 0x62
Jun 28 21:39:14 werner kernel: onenand_wait: timeout! ctrl=0x0000 intr=0x0000
Jun 28 21:39:14 werner kernel: DE600: port 0x378 busy
Jun 28 21:39:14 werner kernel: paride: aten registered as protocol 0
Jun 28 21:39:14 werner kernel: paride: bpck registered as protocol 1
Jun 28 21:39:14 werner kernel: paride: comm registered as protocol 2
Jun 28 21:39:14 werner kernel: paride: dstr registered as protocol 3
Jun 28 21:39:14 werner kernel: paride: k951 registered as protocol 4
Jun 28 21:39:14 werner kernel: paride: k971 registered as protocol 5
Jun 28 21:39:14 werner kernel: paride: epat registered as protocol 6
Jun 28 21:39:14 werner kernel: paride: epia registered as protocol 7
Jun 28 21:39:14 werner kernel: paride: frpw registered as protocol 8
Jun 28 21:39:14 werner kernel: paride: friq registered as protocol 9
Jun 28 21:39:14 werner kernel: paride: fit2 registered as protocol 10
Jun 28 21:39:14 werner kernel: paride: fit3 registered as protocol 11
Jun 28 21:39:14 werner kernel: paride: on20 registered as protocol 12
Jun 28 21:39:14 werner kernel: paride: on26 registered as protocol 13
Jun 28 21:39:14 werner kernel: paride: ktti registered as protocol 14
Jun 28 21:39:14 werner kernel: paride: bpck6 registered as protocol 15
Jun 28 21:39:14 werner kernel: pd: pd version 1.05, major 45, cluster 64, nice 0
Jun 28 21:39:14 werner kernel: pda: Autoprobe failed
Jun 28 21:39:14 werner kernel: pd: no valid drive found
Jun 28 21:39:14 werner kernel: pcd: pcd version 1.07, major 46, nice 0
Jun 28 21:39:14 werner kernel: pcd0: Autoprobe failed
Jun 28 21:39:14 werner kernel: pcd: No CD-ROM drive found
Jun 28 21:39:14 werner kernel: pf: pf version 1.04, major 47, cluster 64, nice 0
Jun 28 21:39:14 werner kernel: pf: No ATAPI disk detected
Jun 28 21:39:14 werner kernel: pt: pt version 1.04, major 96
Jun 28 21:39:14 werner kernel: pt0: Autoprobe failed
Jun 28 21:39:14 werner kernel: pt: No ATAPI tape drive detected
Jun 28 21:39:14 werner kernel: pg: pg version 1.02, major 97
Jun 28 21:39:14 werner kernel: pga: Autoprobe failed
Jun 28 21:39:14 werner kernel: pg: No ATAPI device detected
Jun 28 21:39:14 werner kernel: ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 10
Jun 28 21:39:14 werner kernel: ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 11
Jun 28 21:39:14 werner kernel: GTCO usb driver version: 2.00.0006
Jun 28 21:39:14 werner kernel: EISA: Cannot allocate resource for mainboard
Jun 28 21:39:14 werner kernel: Cannot allocate resource for EISA slot 1
Jun 28 21:39:14 werner kernel: Cannot allocate resource for EISA slot 2
Jun 28 21:39:14 werner kernel: Cannot allocate resource for EISA slot 3
Jun 28 21:39:14 werner kernel: Cannot allocate resource for EISA slot 4
Jun 28 21:39:14 werner kernel: Cannot allocate resource for EISA slot 5
Jun 28 21:39:14 werner kernel: Cannot allocate resource for EISA slot 6
Jun 28 21:39:14 werner kernel: Cannot allocate resource for EISA slot 7
Jun 28 21:39:14 werner kernel: Cannot allocate resource for EISA slot 8
Jun 28 21:39:14 werner kernel: dell-wmi: No known WMI GUID found
Jun 28 21:39:14 werner kernel: This machine doesn't have MSI-hotkeys through WMI
Jun 28 21:39:14 werner kernel: [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects
Jun 28 21:39:14 werner kernel: sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Jun 28 21:39:14 werner kernel: VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
Jun 28 21:39:14 werner kernel: ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 11
Jun 28 21:39:14 werner kernel: k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
Jun 28 21:39:14 werner kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
Jun 28 21:39:14 werner kernel: ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 11
Jun 28 21:39:14 werner kernel: rt2860sta: module is from the staging directory, the quality is unknown, you have been warned.
Jun 28 21:39:14 werner kernel: EXT3-fs (sda3): warning: maximal mount count reached, running e2fsck is recommended
Jun 28 21:39:14 werner udevd-event[5110]: udev_rules_apply_format: unknown format variable '$modalias | grep -q eagle-usb || exit; while ! /sbin/eaglectrl -p 2>/dev/null | /bin/grep -q Post-firmware; do sleep 2; done; /sbin/eaglectrl -d''
Jun 28 21:39:14 werner udevd-event[5109]: udev_rules_apply_format: unknown format variable '$modalias | grep -q eagle-usb || exit; while ! /sbin/eaglectrl -p 2>/dev/null | /bin/grep -q Post-firmware; do sleep 2; done; /sbin/eaglectrl -d''
Jun 28 21:39:25 werner apcupsd[5087]: apcupsd FATAL ERROR in smartsetup.c at line 171 PANIC! Cannot communicate with UPS via serial port. Please make sure the port specified on the DEVICE directive is correct, and that your cable specification on the UPSCABLE directive is correct.
Jun 28 21:39:25 werner apcupsd[5087]: apcupsd error shutdown completed
Jun 28 21:39:28 werner hpijs: unable to init hpijs server
Jun 28 21:39:32 werner udevd[2393]: add_to_rules: unknown key 'MODALIAS' in /etc/udev/rules.d/80-eagle-usb.rules:1
Jun 28 21:39:51 werner kdm_greet[5518]: Can't open default user face
Jun 28 21:42:16 werner kernel: Malformed early option 'acpi'
Jun 28 21:42:16 werner kernel: ACPI: RSDP 000fb9f0 00024 (v02 ACPIAM)
Jun 28 21:42:16 werner kernel: ACPI: XSDT affc0100 0004C (v01 A_M_I_ OEMXSDT 01000715 MSFT 00000097)
Jun 28 21:42:16 werner kernel: ACPI: FACP affc0290 000F4 (v03 A_M_I_ OEMFACP 01000715 MSFT 00000097)
Jun 28 21:42:16 werner kernel: ACPI: DSDT affc0440 04DAE (v01 A0647 A0647000 00000000 INTL 02002026)
Jun 28 21:42:16 werner kernel: ACPI: FACS affce000 00040
Jun 28 21:42:16 werner kernel: ACPI: APIC affc0390 00070 (v01 A_M_I_ OEMAPIC 01000715 MSFT 00000097)
Jun 28 21:42:16 werner kernel: ACPI: MCFG affc0400 0003C (v01 A_M_I_ OEMMCFG 01000715 MSFT 00000097)
Jun 28 21:42:16 werner kernel: ACPI: OEMB affce040 00060 (v01 A_M_I_ AMI_OEM 01000715 MSFT 00000097)
Jun 28 21:42:16 werner kernel: ACPI: HPET affc51f0 00038 (v01 A_M_I_ OEMHPET0 01000715 MSFT 00000097)
Jun 28 21:42:16 werner kernel: Zone PFN ranges:
Jun 28 21:42:16 werner kernel: DMA 0x00000010 -> 0x00001000
Jun 28 21:42:16 werner kernel: Normal 0x00001000 -> 0x000377fe
Jun 28 21:42:16 werner kernel: HighMem 0x000377fe -> 0x000affc0
Jun 28 21:42:16 werner kernel: Movable zone start PFN for each node
Jun 28 21:42:16 werner kernel: early_node_map[2] active PFN ranges
Jun 28 21:42:16 werner kernel: 0: 0x00000010 -> 0x0000009f
Jun 28 21:42:16 werner kernel: 0: 0x00000100 -> 0x000affc0
Jun 28 21:42:16 werner kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 715087
Jun 28 21:42:16 werner kernel: Console: colour dummy device 80x25
Jun 28 21:42:16 werner kernel: Fast TSC calibration using PIT
Jun 28 21:42:16 werner kernel: Detected 2411.094 MHz processor.
Jun 28 21:42:16 werner kernel: Mount-cache hash table entries: 512
Jun 28 21:42:16 werner kernel: AMD PMU driver.
Jun 28 21:42:16 werner kernel: ACPI: setting ELCR to 0200 (from 8c00)
Jun 28 21:42:16 werner kernel: bio: create slab <bio-0> at 0
Jun 28 21:42:16 werner kernel: ACPI: Executed 1 blocks of module-level executable AML code
Jun 28 21:42:16 werner kernel: ACPI Warning: Incorrect checksum in table [OEMB] - 0xF8, should be 0xEB (20100428/tbutils-314)
Jun 28 21:42:16 werner kernel: raid6: int32x1 617 MB/s
Jun 28 21:42:16 werner kernel: raid6: int32x2 832 MB/s
Jun 28 21:42:16 werner kernel: raid6: int32x4 691 MB/s
Jun 28 21:42:16 werner kernel: raid6: int32x8 523 MB/s
Jun 28 21:42:16 werner kernel: raid6: mmxx1 1937 MB/s
Jun 28 21:42:16 werner kernel: raid6: mmxx2 3523 MB/s
Jun 28 21:42:16 werner kernel: raid6: sse1x1 1917 MB/s
Jun 28 21:42:16 werner kernel: raid6: sse1x2 2949 MB/s
Jun 28 21:42:16 werner kernel: raid6: sse2x1 3246 MB/s
Jun 28 21:42:16 werner kernel: raid6: sse2x2 4250 MB/s
Jun 28 21:42:16 werner kernel: raid6: using algorithm sse2x2 (4250 MB/s)
Jun 28 21:42:16 werner kernel: microcode: microcode: CPU0: AMD CPU family 0xf not supported
Jun 28 21:42:16 werner kernel: highmem bounce pool size: 64 pages
Jun 28 21:42:16 werner kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jun 28 21:42:16 werner kernel: DLM (built Jun 28 2010 02:54:36) installed
Jun 28 21:42:16 werner kernel: EFS: 1.0a - http://aeschi.ch.eu.org/efs/
Jun 28 21:42:16 werner kernel: OCFS2 User DLM kernel interface loaded
Jun 28 21:42:16 werner kernel: GFS2 (built Jun 28 2010 02:55:48) installed
Jun 28 21:42:16 werner kernel: acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
Jun 28 21:42:16 werner kernel: mdacon: MDA with 8K of memory detected.
Jun 28 21:42:16 werner kernel: Console: switching consoles 13-16 to MDA-2
Jun 28 21:42:16 werner kernel: ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 11
Jun 28 21:42:16 werner kernel: nvidiafb: CRTC0 analog found
Jun 28 21:42:16 werner kernel: nvidiafb: CRTC1 analog not found
Jun 28 21:42:16 werner kernel: i2c i2c-0: unable to read EDID block.
Jun 28 21:42:16 werner last message repeated 2 times
Jun 28 21:42:16 werner kernel: nvidiafb: EDID found from BUS2
Jun 28 21:42:16 werner kernel: nvidiafb: CRTC 0 appears to have a CRT attached
Jun 28 21:42:16 werner kernel: nvidiafb: Using CRT on CRTC 0
Jun 28 21:42:16 werner kernel: Console: switching to colour frame buffer device 210x65
Jun 28 21:42:16 werner kernel: Could not find Carillo Ranch MCH device.
Jun 28 21:42:16 werner kernel: no IO addresses supplied
Jun 28 21:42:16 werner kernel: hgafb: probe of hgafb.0 failed with error -22
Jun 28 21:42:16 werner kernel: uvesafb: failed to execute /sbin/v86d
Jun 28 21:42:16 werner kernel: uvesafb: make sure that the v86d helper is installed and executable
Jun 28 21:42:16 werner kernel: uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
Jun 28 21:42:16 werner kernel: uvesafb: vbe_init() failed with -22
Jun 28 21:42:16 werner kernel: uvesafb: probe of uvesafb.0 failed with error -22
Jun 28 21:42:16 werner kernel: vesafb: cannot reserve video memory at 0xc0000000
Jun 28 21:42:16 werner kernel: ERST: Table is not found!
Jun 28 21:42:16 werner kernel: toshiba: not a supported Toshiba laptop
Jun 28 21:42:16 werner kernel: Compaq SMART2 Driver (v 2.6.0)
Jun 28 21:42:16 werner kernel: hda3: <minix: hda5 hda6 hda7 >
Jun 28 21:42:16 werner kernel: Loading Adaptec I2O RAID: Version 2.4 Build 5go
Jun 28 21:42:16 werner kernel: scsi: <fdomain> Detection failed (no card)
Jun 28 21:42:16 werner kernel: NCR53c406a: no available ports found
Jun 28 21:42:16 werner kernel: Emulex LightPulse Fibre Channel SCSI driver 8.3.12
Jun 28 21:42:16 werner kernel: Copyright(c) 2004-2009 Emulex. All rights reserved.
Jun 28 21:42:16 werner kernel: Failed initialization of WD-7000 SCSI card!
Jun 28 21:42:16 werner kernel: GDT-HA: Storage RAID Controller Driver. Version: 3.05
Jun 28 21:42:16 werner kernel: 3ware Storage Controller device driver for Linux v1.26.02.003.
Jun 28 21:42:16 werner kernel: 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
Jun 28 21:42:16 werner kernel: imm: Version 2.05 (for Linux 2.4.0)
Jun 28 21:42:16 werner kernel: ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 15
Jun 28 21:42:16 werner kernel: Error: Driver 'pata_platform' is already registered, aborting...
Jun 28 21:42:16 werner kernel: mtdoops: mtd device (mtddev=name/number) must be supplied
Jun 28 21:42:16 werner kernel: physmap-flash.0: failed to claim resource 0
Jun 28 21:42:16 werner kernel: Failed to ioremap_nocache
Jun 28 21:42:16 werner last message repeated 2 times
Jun 28 21:42:16 werner kernel: SNAPGEAR: failed to ioremap() BOOTCS
Jun 28 21:42:16 werner kernel: Generic platform RAM MTD, (c) 2004 Simtec Electronics
Jun 28 21:42:16 werner kernel: [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
Jun 28 21:42:16 werner last message repeated 5 times
Jun 28 21:42:16 werner kernel: flash size: 8 MiB
Jun 28 21:42:16 werner kernel: page size: 512 bytes
Jun 28 21:42:16 werner kernel: OOB area size: 16 bytes
Jun 28 21:42:16 werner kernel: sector size: 8 KiB
Jun 28 21:42:16 werner kernel: pages number: 16384
Jun 28 21:42:16 werner kernel: pages per sector: 16
Jun 28 21:42:16 werner kernel: bus width: 8
Jun 28 21:42:16 werner kernel: bits in sector size: 13
Jun 28 21:42:16 werner kernel: bits in page size: 9
Jun 28 21:42:16 werner kernel: bits in OOB size: 4
Jun 28 21:42:16 werner kernel: flash size with OOB: 8448 KiB
Jun 28 21:42:16 werner kernel: page address bytes: 3
Jun 28 21:42:16 werner kernel: sector address bytes: 2
Jun 28 21:42:16 werner kernel: options: 0x62
Jun 28 21:42:16 werner kernel: onenand_wait: timeout! ctrl=0x0000 intr=0x0000
Jun 28 21:42:16 werner kernel: DE600: port 0x378 busy
Jun 28 21:42:16 werner kernel: paride: aten registered as protocol 0
Jun 28 21:42:16 werner kernel: paride: bpck registered as protocol 1
Jun 28 21:42:16 werner kernel: paride: comm registered as protocol 2
Jun 28 21:42:16 werner kernel: paride: dstr registered as protocol 3
Jun 28 21:42:16 werner kernel: paride: k951 registered as protocol 4
Jun 28 21:42:16 werner kernel: paride: k971 registered as protocol 5
Jun 28 21:42:16 werner kernel: paride: epat registered as protocol 6
Jun 28 21:42:16 werner kernel: paride: epia registered as protocol 7
Jun 28 21:42:16 werner kernel: paride: frpw registered as protocol 8
Jun 28 21:42:16 werner kernel: paride: friq registered as protocol 9
Jun 28 21:42:16 werner kernel: paride: fit2 registered as protocol 10
Jun 28 21:42:16 werner kernel: paride: fit3 registered as protocol 11
Jun 28 21:42:16 werner kernel: paride: on20 registered as protocol 12
Jun 28 21:42:16 werner kernel: paride: on26 registered as protocol 13
Jun 28 21:42:16 werner kernel: paride: ktti registered as protocol 14
Jun 28 21:42:16 werner kernel: paride: bpck6 registered as protocol 15
Jun 28 21:42:16 werner kernel: pd: pd version 1.05, major 45, cluster 64, nice 0
Jun 28 21:42:16 werner kernel: pda: Autoprobe failed
Jun 28 21:42:16 werner kernel: pd: no valid drive found
Jun 28 21:42:16 werner kernel: pcd: pcd version 1.07, major 46, nice 0
Jun 28 21:42:16 werner kernel: pcd0: Autoprobe failed
Jun 28 21:42:16 werner kernel: pcd: No CD-ROM drive found
Jun 28 21:42:16 werner kernel: pf: pf version 1.04, major 47, cluster 64, nice 0
Jun 28 21:42:16 werner kernel: pf: No ATAPI disk detected
Jun 28 21:42:16 werner kernel: pt: pt version 1.04, major 96
Jun 28 21:42:16 werner kernel: pt0: Autoprobe failed
Jun 28 21:42:16 werner kernel: pt: No ATAPI tape drive detected
Jun 28 21:42:16 werner kernel: pg: pg version 1.02, major 97
Jun 28 21:42:16 werner kernel: pga: Autoprobe failed
Jun 28 21:42:16 werner kernel: pg: No ATAPI device detected
Jun 28 21:42:16 werner kernel: ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 10
Jun 28 21:42:16 werner kernel: ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 11
Jun 28 21:42:16 werner udevd-event[5114]: udev_rules_apply_format: unknown format variable '$modalias | grep -q eagle-usb || exit; while ! /sbin/eaglectrl -p 2>/dev/null | /bin/grep -q Post-firmware; do sleep 2; done; /sbin/eaglectrl -d''
Jun 28 21:42:16 werner udevd-event[5113]: udev_rules_apply_format: unknown format variable '$modalias | grep -q eagle-usb || exit; while ! /sbin/eaglectrl -p 2>/dev/null | /bin/grep -q Post-firmware; do sleep 2; done; /sbin/eaglectrl -d''
Jun 28 21:42:16 werner kernel: GTCO usb driver version: 2.00.0006
Jun 28 21:42:16 werner kernel: EISA: Cannot allocate resource for mainboard
Jun 28 21:42:16 werner kernel: Cannot allocate resource for EISA slot 1
Jun 28 21:42:16 werner kernel: Cannot allocate resource for EISA slot 2
Jun 28 21:42:16 werner kernel: Cannot allocate resource for EISA slot 3
Jun 28 21:42:16 werner kernel: Cannot allocate resource for EISA slot 4
Jun 28 21:42:16 werner kernel: Cannot allocate resource for EISA slot 5
Jun 28 21:42:16 werner kernel: Cannot allocate resource for EISA slot 6
Jun 28 21:42:16 werner kernel: Cannot allocate resource for EISA slot 7
Jun 28 21:42:16 werner kernel: Cannot allocate resource for EISA slot 8
Jun 28 21:42:16 werner kernel: dell-wmi: No known WMI GUID found
Jun 28 21:42:16 werner kernel: This machine doesn't have MSI-hotkeys through WMI
Jun 28 21:42:16 werner kernel: [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects
Jun 28 21:42:16 werner kernel: sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Jun 28 21:42:16 werner kernel: VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
Jun 28 21:42:16 werner kernel: ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 11
Jun 28 21:42:16 werner kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
Jun 28 21:42:16 werner kernel: k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
Jun 28 21:42:16 werner kernel: ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 11
Jun 28 21:42:16 werner kernel: rt2860sta: module is from the staging directory, the quality is unknown, you have been warned.
Jun 28 21:42:16 werner kernel: EXT3-fs (sda3): warning: maximal mount count reached, running e2fsck is recommended
Jun 28 21:42:27 werner apcupsd[5091]: apcupsd FATAL ERROR in smartsetup.c at line 171 PANIC! Cannot communicate with UPS via serial port. Please make sure the port specified on the DEVICE directive is correct, and that your cable specification on the UPSCABLE directive is correct.
Jun 28 21:42:27 werner apcupsd[5091]: apcupsd error shutdown completed
Jun 28 21:42:28 werner hpijs: unable to init hpijs server
Jun 28 21:42:30 werner udevd[2393]: add_to_rules: unknown key 'MODALIAS' in /etc/udev/rules.d/80-eagle-usb.rules:1
Jun 28 21:43:13 werner hcid[5371]: Got disconnected from the system message bus
Jun 28 21:45:20 werner kernel: Malformed early option 'acpi'
Jun 28 21:45:20 werner kernel: ACPI: RSDP 000fb9f0 00024 (v02 ACPIAM)
Jun 28 21:45:20 werner kernel: ACPI: XSDT affc0100 0004C (v01 A_M_I_ OEMXSDT 01000715 MSFT 00000097)
Jun 28 21:45:20 werner kernel: ACPI: FACP affc0290 000F4 (v03 A_M_I_ OEMFACP 01000715 MSFT 00000097)
Jun 28 21:45:20 werner kernel: ACPI: DSDT affc0440 04DAE (v01 A0647 A0647000 00000000 INTL 02002026)
Jun 28 21:45:20 werner kernel: ACPI: FACS affce000 00040
Jun 28 21:45:20 werner kernel: ACPI: APIC affc0390 00070 (v01 A_M_I_ OEMAPIC 01000715 MSFT 00000097)
Jun 28 21:45:20 werner kernel: ACPI: MCFG affc0400 0003C (v01 A_M_I_ OEMMCFG 01000715 MSFT 00000097)
Jun 28 21:45:20 werner kernel: ACPI: OEMB affce040 00060 (v01 A_M_I_ AMI_OEM 01000715 MSFT 00000097)
Jun 28 21:45:20 werner kernel: ACPI: HPET affc51f0 00038 (v01 A_M_I_ OEMHPET0 01000715 MSFT 00000097)
Jun 28 21:45:20 werner kernel: Zone PFN ranges:
Jun 28 21:45:20 werner kernel: DMA 0x00000010 -> 0x00001000
Jun 28 21:45:20 werner kernel: Normal 0x00001000 -> 0x000377fe
Jun 28 21:45:20 werner kernel: HighMem 0x000377fe -> 0x000affc0
Jun 28 21:45:20 werner kernel: Movable zone start PFN for each node
Jun 28 21:45:20 werner kernel: early_node_map[2] active PFN ranges
Jun 28 21:45:20 werner kernel: 0: 0x00000010 -> 0x0000009f
Jun 28 21:45:20 werner kernel: 0: 0x00000100 -> 0x000affc0
Jun 28 21:45:20 werner kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 715087
Jun 28 21:45:20 werner kernel: Console: colour dummy device 80x25
Jun 28 21:45:20 werner kernel: Fast TSC calibration failed
Jun 28 21:45:20 werner kernel: Detected 2410.734 MHz processor.
Jun 28 21:45:20 werner kernel: Mount-cache hash table entries: 512
Jun 28 21:45:20 werner kernel: AMD PMU driver.
Jun 28 21:45:20 werner kernel: ACPI: setting ELCR to 0200 (from 8c00)
Jun 28 21:45:20 werner kernel: bio: create slab <bio-0> at 0
Jun 28 21:45:20 werner kernel: ACPI: Executed 1 blocks of module-level executable AML code
Jun 28 21:45:20 werner kernel: ACPI Warning: Incorrect checksum in table [OEMB] - 0xF8, should be 0xEB (20100428/tbutils-314)
Jun 28 21:45:20 werner kernel: raid6: int32x1 617 MB/s
Jun 28 21:45:20 werner kernel: raid6: int32x2 832 MB/s
Jun 28 21:45:20 werner kernel: raid6: int32x4 691 MB/s
Jun 28 21:45:20 werner kernel: raid6: int32x8 523 MB/s
Jun 28 21:45:20 werner kernel: raid6: mmxx1 1937 MB/s
Jun 28 21:45:20 werner kernel: raid6: mmxx2 3570 MB/s
Jun 28 21:45:20 werner kernel: raid6: sse1x1 1894 MB/s
Jun 28 21:45:20 werner kernel: raid6: sse1x2 2949 MB/s
Jun 28 21:45:20 werner kernel: raid6: sse2x1 3246 MB/s
Jun 28 21:45:20 werner kernel: raid6: sse2x2 4308 MB/s
Jun 28 21:45:20 werner kernel: raid6: using algorithm sse2x2 (4308 MB/s)
Jun 28 21:45:20 werner kernel: microcode: microcode: CPU0: AMD CPU family 0xf not supported
Jun 28 21:45:20 werner kernel: highmem bounce pool size: 64 pages
Jun 28 21:45:20 werner kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jun 28 21:45:20 werner kernel: DLM (built Jun 28 2010 02:54:36) installed
Jun 28 21:45:20 werner kernel: EFS: 1.0a - http://aeschi.ch.eu.org/efs/
Jun 28 21:45:20 werner kernel: OCFS2 User DLM kernel interface loaded
Jun 28 21:45:20 werner kernel: GFS2 (built Jun 28 2010 02:55:48) installed
Jun 28 21:45:20 werner kernel: acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
Jun 28 21:45:20 werner kernel: mdacon: MDA with 8K of memory detected.
Jun 28 21:45:20 werner kernel: Console: switching consoles 13-16 to MDA-2
Jun 28 21:45:20 werner kernel: ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 11
Jun 28 21:45:20 werner kernel: nvidiafb: CRTC0 analog found
Jun 28 21:45:20 werner kernel: nvidiafb: CRTC1 analog not found
Jun 28 21:45:20 werner kernel: i2c i2c-0: unable to read EDID block.
Jun 28 21:45:20 werner last message repeated 2 times
Jun 28 21:45:20 werner kernel: nvidiafb: EDID found from BUS2
Jun 28 21:45:20 werner kernel: nvidiafb: CRTC 0 appears to have a CRT attached
Jun 28 21:45:20 werner kernel: nvidiafb: Using CRT on CRTC 0
Jun 28 21:45:20 werner kernel: Console: switching to colour frame buffer device 210x65
Jun 28 21:45:20 werner kernel: Could not find Carillo Ranch MCH device.
Jun 28 21:45:20 werner kernel: no IO addresses supplied
Jun 28 21:45:20 werner kernel: hgafb: probe of hgafb.0 failed with error -22
Jun 28 21:45:20 werner kernel: uvesafb: failed to execute /sbin/v86d
Jun 28 21:45:20 werner kernel: uvesafb: make sure that the v86d helper is installed and executable
Jun 28 21:45:20 werner kernel: uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
Jun 28 21:45:20 werner kernel: uvesafb: vbe_init() failed with -22
Jun 28 21:45:20 werner kernel: uvesafb: probe of uvesafb.0 failed with error -22
Jun 28 21:45:20 werner kernel: vesafb: cannot reserve video memory at 0xc0000000
Jun 28 21:45:20 werner kernel: ERST: Table is not found!
Jun 28 21:45:20 werner kernel: toshiba: not a supported Toshiba laptop
Jun 28 21:45:20 werner kernel: Compaq SMART2 Driver (v 2.6.0)
Jun 28 21:45:20 werner kernel: hda3: <minix: hda5 hda6 hda7 >
Jun 28 21:45:20 werner kernel: Loading Adaptec I2O RAID: Version 2.4 Build 5go
Jun 28 21:45:20 werner kernel: scsi: <fdomain> Detection failed (no card)
Jun 28 21:45:20 werner kernel: NCR53c406a: no available ports found
Jun 28 21:45:20 werner kernel: Emulex LightPulse Fibre Channel SCSI driver 8.3.12
Jun 28 21:45:20 werner kernel: Copyright(c) 2004-2009 Emulex. All rights reserved.
Jun 28 21:45:20 werner kernel: Failed initialization of WD-7000 SCSI card!
Jun 28 21:45:20 werner kernel: GDT-HA: Storage RAID Controller Driver. Version: 3.05
Jun 28 21:45:20 werner kernel: 3ware Storage Controller device driver for Linux v1.26.02.003.
Jun 28 21:45:20 werner kernel: 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
Jun 28 21:45:20 werner kernel: imm: Version 2.05 (for Linux 2.4.0)
Jun 28 21:45:20 werner kernel: ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 15
Jun 28 21:45:20 werner kernel: Error: Driver 'pata_platform' is already registered, aborting...
Jun 28 21:45:20 werner kernel: mtdoops: mtd device (mtddev=name/number) must be supplied
Jun 28 21:45:20 werner kernel: physmap-flash.0: failed to claim resource 0
Jun 28 21:45:20 werner kernel: Failed to ioremap_nocache
Jun 28 21:45:20 werner last message repeated 2 times
Jun 28 21:45:20 werner kernel: SNAPGEAR: failed to ioremap() BOOTCS
Jun 28 21:45:20 werner kernel: Generic platform RAM MTD, (c) 2004 Simtec Electronics
Jun 28 21:45:20 werner kernel: [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
Jun 28 21:45:20 werner last message repeated 5 times
Jun 28 21:45:20 werner kernel: flash size: 8 MiB
Jun 28 21:45:20 werner kernel: page size: 512 bytes
Jun 28 21:45:20 werner kernel: OOB area size: 16 bytes
Jun 28 21:45:20 werner kernel: sector size: 8 KiB
Jun 28 21:45:20 werner kernel: pages number: 16384
Jun 28 21:45:20 werner kernel: pages per sector: 16
Jun 28 21:45:20 werner kernel: bus width: 8
Jun 28 21:45:20 werner kernel: bits in sector size: 13
Jun 28 21:45:20 werner kernel: bits in page size: 9
Jun 28 21:45:20 werner kernel: bits in OOB size: 4
Jun 28 21:45:20 werner kernel: flash size with OOB: 8448 KiB
Jun 28 21:45:20 werner kernel: page address bytes: 3
Jun 28 21:45:20 werner kernel: sector address bytes: 2
Jun 28 21:45:20 werner kernel: options: 0x62
Jun 28 21:45:20 werner kernel: onenand_wait: timeout! ctrl=0x0000 intr=0x0000
Jun 28 21:45:20 werner kernel: DE600: port 0x378 busy
Jun 28 21:45:20 werner kernel: paride: aten registered as protocol 0
Jun 28 21:45:20 werner kernel: paride: bpck registered as protocol 1
Jun 28 21:45:20 werner kernel: paride: comm registered as protocol 2
Jun 28 21:45:20 werner kernel: paride: dstr registered as protocol 3
Jun 28 21:45:20 werner kernel: paride: k951 registered as protocol 4
Jun 28 21:45:20 werner kernel: paride: k971 registered as protocol 5
Jun 28 21:45:20 werner kernel: paride: epat registered as protocol 6
Jun 28 21:45:20 werner kernel: paride: epia registered as protocol 7
Jun 28 21:45:20 werner kernel: paride: frpw registered as protocol 8
Jun 28 21:45:20 werner kernel: paride: friq registered as protocol 9
Jun 28 21:45:20 werner kernel: paride: fit2 registered as protocol 10
Jun 28 21:45:20 werner kernel: paride: fit3 registered as protocol 11
Jun 28 21:45:20 werner kernel: paride: on20 registered as protocol 12
Jun 28 21:45:20 werner kernel: paride: on26 registered as protocol 13
Jun 28 21:45:20 werner kernel: paride: ktti registered as protocol 14
Jun 28 21:45:20 werner kernel: paride: bpck6 registered as protocol 15
Jun 28 21:45:20 werner kernel: pd: pd version 1.05, major 45, cluster 64, nice 0
Jun 28 21:45:20 werner kernel: pda: Autoprobe failed
Jun 28 21:45:20 werner kernel: pd: no valid drive found
Jun 28 21:45:20 werner kernel: pcd: pcd version 1.07, major 46, nice 0
Jun 28 21:45:20 werner kernel: pcd0: Autoprobe failed
Jun 28 21:45:20 werner kernel: pcd: No CD-ROM drive found
Jun 28 21:45:20 werner kernel: pf: pf version 1.04, major 47, cluster 64, nice 0
Jun 28 21:45:20 werner kernel: pf: No ATAPI disk detected
Jun 28 21:45:20 werner kernel: pt: pt version 1.04, major 96
Jun 28 21:45:20 werner kernel: pt0: Autoprobe failed
Jun 28 21:45:20 werner kernel: pt: No ATAPI tape drive detected
Jun 28 21:45:20 werner kernel: pg: pg version 1.02, major 97
Jun 28 21:45:20 werner kernel: pga: Autoprobe failed
Jun 28 21:45:20 werner kernel: pg: No ATAPI device detected
Jun 28 21:45:20 werner kernel: ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 10
Jun 28 21:45:20 werner kernel: ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 11
Jun 28 21:45:20 werner kernel: GTCO usb driver version: 2.00.0006
Jun 28 21:45:20 werner kernel: EISA: Cannot allocate resource for mainboard
Jun 28 21:45:20 werner kernel: Cannot allocate resource for EISA slot 1
Jun 28 21:45:20 werner kernel: Cannot allocate resource for EISA slot 2
Jun 28 21:45:20 werner kernel: Cannot allocate resource for EISA slot 3
Jun 28 21:45:20 werner kernel: Cannot allocate resource for EISA slot 4
Jun 28 21:45:20 werner kernel: Cannot allocate resource for EISA slot 5
Jun 28 21:45:20 werner kernel: Cannot allocate resource for EISA slot 6
Jun 28 21:45:20 werner kernel: Cannot allocate resource for EISA slot 7
Jun 28 21:45:20 werner kernel: Cannot allocate resource for EISA slot 8
Jun 28 21:45:20 werner kernel: dell-wmi: No known WMI GUID found
Jun 28 21:45:20 werner kernel: This machine doesn't have MSI-hotkeys through WMI
Jun 28 21:45:20 werner kernel: [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects
Jun 28 21:45:20 werner kernel: sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Jun 28 21:45:20 werner kernel: VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
Jun 28 21:45:20 werner kernel: ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 11
Jun 28 21:45:20 werner kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
Jun 28 21:45:20 werner kernel: k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
Jun 28 21:45:20 werner kernel: ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 11
Jun 28 21:45:20 werner kernel: rt2860sta: module is from the staging directory, the quality is unknown, you have been warned.
Jun 28 21:45:20 werner kernel: EXT3-fs (sda3): warning: maximal mount count reached, running e2fsck is recommended
Jun 28 21:45:31 werner apcupsd[5096]: apcupsd FATAL ERROR in smartsetup.c at line 171 PANIC! Cannot communicate with UPS via serial port. Please make sure the port specified on the DEVICE directive is correct, and that your cable specification on the UPSCABLE directive is correct.
Jun 28 21:45:32 werner apcupsd[5096]: apcupsd error shutdown completed
Jun 28 21:45:36 werner hpijs: unable to init hpijs server
Jun 28 21:45:39 werner udevd[2393]: add_to_rules: unknown key 'MODALIAS' in /etc/udev/rules.d/80-eagle-usb.rules:1
Jun 28 21:45:57 werner kdm_greet[5500]: Can't open default user face
Jun 28 21:47:20 werner kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Jun 28 21:47:21 werner kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Jun 28 21:47:21 werner kernel: BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Jun 28 21:47:21 werner kernel: BIOS-e820: 0000000000100000 - 00000000affc0000 (usable)
Jun 28 21:47:21 werner kernel: BIOS-e820: 00000000affc0000 - 00000000affce000 (ACPI data)
Jun 28 21:47:21 werner kernel: BIOS-e820: 00000000affce000 - 00000000afff0000 (ACPI NVS)
Jun 28 21:47:21 werner kernel: BIOS-e820: 00000000afff0000 - 00000000b0000000 (reserved)
Jun 28 21:47:21 werner kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Jun 28 21:47:21 werner kernel: BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
Jun 28 21:47:21 werner kernel: BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
Jun 28 21:47:21 werner kernel: BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
Jun 28 21:47:21 werner kernel: Warning only 4GB will be used.
Jun 28 21:47:21 werner kernel: Use a HIGHMEM64G enabled kernel.
Jun 28 21:47:21 werner kernel: Zone PFN ranges:
Jun 28 21:47:21 werner kernel: DMA 0 -> 4096
Jun 28 21:47:21 werner kernel: Normal 4096 -> 229376
Jun 28 21:47:21 werner kernel: HighMem 229376 -> 1048576
Jun 28 21:47:21 werner kernel: Movable zone start PFN for each node
Jun 28 21:47:21 werner kernel: early_node_map[1] active PFN ranges
Jun 28 21:47:21 werner kernel: 0: 0 -> 1048576
Jun 28 21:47:21 werner kernel: ACPI: RSDP 000FB9F0, 0024 (r2 ACPIAM)
Jun 28 21:47:21 werner kernel: ACPI: XSDT AFFC0100, 004C (r1 A_M_I_ OEMXSDT 1000715 MSFT 97)
Jun 28 21:47:21 werner kernel: ACPI: FACP AFFC0290, 00F4 (r3 A_M_I_ OEMFACP 1000715 MSFT 97)
Jun 28 21:47:21 werner kernel: ACPI: DSDT AFFC0440, 4DAE (r1 A0647 A0647000 0 INTL 2002026)
Jun 28 21:47:21 werner kernel: ACPI: FACS AFFCE000, 0040
Jun 28 21:47:21 werner kernel: ACPI: APIC AFFC0390, 0070 (r1 A_M_I_ OEMAPIC 1000715 MSFT 97)
Jun 28 21:47:21 werner kernel: ACPI: MCFG AFFC0400, 003C (r1 A_M_I_ OEMMCFG 1000715 MSFT 97)
Jun 28 21:47:21 werner kernel: ACPI: OEMB AFFCE040, 0060 (r1 A_M_I_ AMI_OEM 1000715 MSFT 97)
Jun 28 21:47:21 werner kernel: ACPI: HPET AFFC51F0, 0038 (r1 A_M_I_ OEMHPET0 1000715 MSFT 97)
Jun 28 21:47:21 werner kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
Jun 28 21:47:21 werner kernel: Allocating PCI resources starting at b8000000 (gap: b0000000:4ec00000)
Jun 28 21:47:21 werner kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1040384
Jun 28 21:47:21 werner kernel: PID hash table entries: 4096 (order: 12, 16384 bytes)
Jun 28 21:47:21 werner kernel: Detected 2410.933 MHz processor.
Jun 28 21:47:21 werner kernel: Console: colour dummy device 80x25
Jun 28 21:47:21 werner kernel: fixmap : 0xffe13000 - 0xfffff000 (1968 kB)
Jun 28 21:47:21 werner kernel: pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Jun 28 21:47:21 werner kernel: vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
Jun 28 21:47:21 werner kernel: lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
Jun 28 21:47:21 werner kernel: .init : 0xc09be000 - 0xc0a42000 ( 528 kB)
Jun 28 21:47:21 werner kernel: .data : 0xc076fe0b - 0xc09b0280 (2305 kB)
Jun 28 21:47:21 werner kernel: .text : 0xc0100000 - 0xc076fe0b (6591 kB)
Jun 28 21:47:21 werner kernel: Calibrating delay using timer specific routine.. 4826.74 BogoMIPS (lpj=9653483)
Jun 28 21:47:21 werner kernel: selinux_register_security: There is already a secondary security module registered.
Jun 28 21:47:21 werner kernel: Mount-cache hash table entries: 512
Jun 28 21:47:21 werner kernel: Calibrating delay using timer specific routine.. 4821.87 BogoMIPS (lpj=9643741)
Jun 28 21:47:21 werner kernel: PCI: Not using MMCONFIG.
Jun 28 21:47:21 werner kernel: pnp 00:0b: no end tag in resource structure
Jun 28 21:47:21 werner kernel: PCI: Probing PCI hardware
Jun 28 21:47:21 werner kernel: ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread F7C30000 could not acquire Mutex [1] [20080321]
Jun 28 21:47:21 werner kernel: highmem bounce pool size: 64 pages
Jun 28 21:47:21 werner kernel: Total HugeTLB memory allocated, 0
Jun 28 21:47:21 werner kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jun 28 21:47:21 werner kernel: GFS2 (built Aug 10 2008 14:48:40) installed
Jun 28 21:47:21 werner kernel: assign_interrupt_mode Found MSI capability
Jun 28 21:47:21 werner last message repeated 2 times
Jun 28 21:47:21 werner kernel: Console: switching to colour frame buffer device 128x48
Jun 28 21:47:21 werner kernel: Compaq SMART2 Driver (v 2.6.0)
Jun 28 21:47:21 werner kernel: hda: Hitachi HDT725050VLAT80, ATA DISK drive
Jun 28 21:47:21 werner kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jun 28 21:47:21 werner kernel: ide_generic: I/O resource 0x1F0-0x1F7 not free.
Jun 28 21:47:21 werner kernel: ide_generic: I/O resource 0x170-0x177 not free.
Jun 28 21:47:21 werner kernel: hda3: <minix: hda5 hda6 hda7 >
Jun 28 21:47:21 werner kernel: ide-floppy driver 1.00
Jun 28 21:47:21 werner kernel: Loading Adaptec I2O RAID: Version 2.4 Build 5go
Jun 28 21:47:21 werner kernel: scsi: <fdomain> Detection failed (no card)
Jun 28 21:47:21 werner kernel: Emulex LightPulse Fibre Channel SCSI driver 8.2.6
Jun 28 21:47:21 werner kernel: Copyright(c) 2004-2008 Emulex. All rights reserved.
Jun 28 21:47:21 werner kernel: Failed initialization of WD-7000 SCSI card!
Jun 28 21:47:21 werner kernel: ^Iwith "disable_clustering=1" and report to maintainers
Jun 28 21:47:21 werner kernel: GDT-HA: Storage RAID Controller Driver. Version: 3.05
Jun 28 21:47:21 werner kernel: 3ware Storage Controller device driver for Linux v1.26.02.002.
Jun 28 21:47:21 werner kernel: 3ware 9000 Storage Controller device driver for Linux v2.26.02.010.
Jun 28 21:47:21 werner kernel: Driver 'st' needs updating - please use bus_type methods
Jun 28 21:47:21 werner kernel: Driver 'sd' needs updating - please use bus_type methods
Jun 28 21:47:21 werner kernel: Driver 'sr' needs updating - please use bus_type methods
Jun 28 21:47:21 werner kernel: sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Jun 28 21:47:21 werner kernel: raid6: int32x1 908 MB/s
Jun 28 21:47:21 werner kernel: raid6: int32x2 961 MB/s
Jun 28 21:47:21 werner kernel: raid6: int32x4 915 MB/s
Jun 28 21:47:21 werner kernel: raid6: int32x8 663 MB/s
Jun 28 21:47:21 werner kernel: raid6: mmxx1 1953 MB/s
Jun 28 21:47:21 werner kernel: raid6: mmxx2 3636 MB/s
Jun 28 21:47:21 werner kernel: raid6: sse1x1 1971 MB/s
Jun 28 21:47:21 werner kernel: raid6: sse1x2 3230 MB/s
Jun 28 21:47:21 werner kernel: raid6: sse2x1 3236 MB/s
Jun 28 21:47:21 werner kernel: raid6: sse2x2 4521 MB/s
Jun 28 21:47:21 werner kernel: raid6: using algorithm sse2x2 (4521 MB/s)
Jun 28 21:47:21 werner kernel: Cannot allocate resource for EISA slot 2
Jun 28 21:47:21 werner kernel: Using IPI No-Shortcut mode
Jun 28 21:47:21 werner kernel: registered taskstats version 1
Jun 28 21:47:21 werner kernel: VFS: Mounted root (ext3 filesystem) readonly.
Jun 28 21:47:21 werner kernel: fuse init (API version 7.9)
Jun 28 21:47:21 werner kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jun 28 21:47:21 werner udevd-event[3261]: udev_rules_apply_format: unknown format variable '$modalias | grep -q eagle-usb || exit; while ! /sbin/eaglectrl -p 2>/dev/null | /bin/grep -q Post-firmware; do sleep 2; done; /sbin/eaglectrl -d''
Jun 28 21:47:21 werner udevd-event[3265]: udev_rules_apply_format: unknown format variable '$modalias | grep -q eagle-usb || exit; while ! /sbin/eaglectrl -p 2>/dev/null | /bin/grep -q Post-firmware; do sleep 2; done; /sbin/eaglectrl -d''
Jun 28 21:47:31 werner hpijs: unable to init hpijs server
Jun 28 21:47:32 werner apcupsd[3234]: apcupsd FATAL ERROR in smartsetup.c at line 171 PANIC! Cannot communicate with UPS via serial port. Please make sure the port specified on the DEVICE directive is correct, and that your cable specification on the UPSCABLE directive is correct.
Jun 28 21:47:32 werner apcupsd[3234]: apcupsd error shutdown completed
Jun 28 21:47:34 werner udevd[1266]: add_to_rules: unknown key 'MODALIAS' in /etc/udev/rules.d/80-eagle-usb.rules:1
Jun 28 21:47:54 werner kdm_greet[3676]: Can't open default user face
Jun 28 21:49:49 werner named[4384]: /etc/named.conf:3: option 'multiple-cnames' is obsolete
