Re: New P2020-based board (mpc85xx) gets "Processor 1 is stuck" on 2.6.34, not on 2.6.32

From: Kyle Moffett
Date: Fri Jun 25 2010 - 00:03:15 EST


Oops, put the old linuxppc list on the CC, sorry!

On Thu, Jun 24, 2010 at 23:32, Kyle Moffett <kyle@xxxxxxxxxxxxxxx> wrote:
> Hello,
>
> I'm working on a new board port for a P2020-based board, and I'm
> having problems with my second core not starting up on 2.6.34, even
> though it starts up fine on 2.6.32.
>
> In adding various debugs to mpc85xx_kick_cpu(), it looks like the
> virtual address is detected as 0x7ffff280 on both, and it seems to
> ioremap it to the same address. ÂFurthermore, both of them get the
> "ack" from the other CPU almost immediately (within 1ms).
> Unfortunately, after that the second core fails to rendezvous
> elsewhere in the SMP code and as a result I get "Processor 1 is
> stuck".
>
> Unfortunately I've had no luck looking through "git log
> v2.6.32..v2.6.34 -- arch/powerpc/" by hand, and there are enough
> mechanical merge conflicts with my patchset to make "bisection" very
> painful (IE: git bisect, git cherry-pick, test, git reset --hard
> HEAD^, repeat)
>
> Any additional suggestions on where to look would be much appreciated.
>
> Cheers,
> Kyle Moffett
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/