[PATCH] Topcliff PHUB: Generate PacketHub driver
From: Masayuki Ohtake
Date: Fri Jun 04 2010 - 06:43:50 EST
From: Masayuki Ohtake <masa-korg@xxxxxxxxxxxxxxx>
This patch adds the Packet Hub driver for Topcliff.
Patch created against 2.6.33.1
Signed-off-by: Masayuki Ohtake <masa-korg@xxxxxxxxxxxxxxx>
---
linux-2.6.33.1/drivers/char/Kconfig | 20 +
linux-2.6.33.1/drivers/char/Makefile | 4 +
linux-2.6.33.1/drivers/char/pch_phub/Makefile | 11 +
linux-2.6.33.1/drivers/char/pch_phub/pch_phub.c | 1500 +++++++++++++++++++++++
linux-2.6.33.1/drivers/char/pch_phub/pch_phub.h | 182 +++
5 files changed, 1717 insertions(+), 0 deletions(-)
create mode 100644 linux-2.6.33.1/drivers/char/pch_phub/Makefile
create mode 100644 linux-2.6.33.1/drivers/char/pch_phub/pch_phub.c
create mode 100644 linux-2.6.33.1/drivers/char/pch_phub/pch_phub.h
diff --git a/linux-2.6.33.1/drivers/char/Kconfig b/linux-2.6.33.1/drivers/char/Kconfig
index e023682..16a8334 100644
--- a/linux-2.6.33.1/drivers/char/Kconfig
+++ b/linux-2.6.33.1/drivers/char/Kconfig
@@ -4,6 +4,26 @@
menu "Character devices"
+config PCH_IEEE1588
+ tristate "PCH IEEE1588"
+ depends on PCI
+ help
+ If you say yes to this option, support will be included for the
+ PCH IEEE1588 Host controller.
+
+config PCH_PHUB
+ tristate "PCH PHUB"
+ depends on PCI
+ help
+ If you say yes to this option, support will be included for the
+ PCH Packet Hub Host controller.
+
+config PCH_CAN_PCLK_50MHZ
+ bool "CAN PCLK 50MHz"
+ depends on PCH_PHUB
+ help
+ If you say yes to this option, clock is set to 50MHz.(For CAN control)
+
config VT
bool "Virtual terminal" if EMBEDDED
depends on !S390
diff --git a/linux-2.6.33.1/drivers/char/Makefile b/linux-2.6.33.1/drivers/char/Makefile
index f957edf..dc092d0 100644
--- a/linux-2.6.33.1/drivers/char/Makefile
+++ b/linux-2.6.33.1/drivers/char/Makefile
@@ -111,6 +111,10 @@ obj-$(CONFIG_PS3_FLASH) += ps3flash.o
obj-$(CONFIG_JS_RTC) += js-rtc.o
js-rtc-y = rtc.o
+obj-$(CONFIG_PCH_IEEE1588) += pch_ieee1588/
+
+obj-$(CONFIG_PCH_PHUB) += pch_phub/
+
# Files generated that shall be removed upon make clean
clean-files := consolemap_deftbl.c defkeymap.c
diff --git a/linux-2.6.33.1/drivers/char/pch_phub/Makefile b/linux-2.6.33.1/drivers/char/pch_phub/Makefile
new file mode 100644
index 0000000..bfe2a2b
--- /dev/null
+++ b/linux-2.6.33.1/drivers/char/pch_phub/Makefile
@@ -0,0 +1,11 @@
+ifeq ($(CONFIG_PHUB_DEBUG),y)
+EXTRA_CFLAGS += -DDEBUG
+endif
+
+obj-$(CONFIG_PCH_PHUB) += pch_phub_drv.o
+#to set CAN clock to 50Mhz
+ifdef CONFIG_PCH_CAN_PCLK_50MHZ
+EXTRA_CFLAGS +=-DPCH_CAN_PCLK_50MHZ
+endif
+
+pch_phub_drv-objs := pch_phub.o
diff --git a/linux-2.6.33.1/drivers/char/pch_phub/pch_phub.c b/linux-2.6.33.1/drivers/char/pch_phub/pch_phub.c
new file mode 100644
index 0000000..162653b
--- /dev/null
+++ b/linux-2.6.33.1/drivers/char/pch_phub/pch_phub.c
@@ -0,0 +1,1500 @@
+/*!
+ * @file pch_phub.c
+ * @brief Provides all the implementation of the interfaces pertaining to
+ * the Packet Hub module.
+ * @version 1.0.0.0
+ * @section
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ * History:
+ * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD.
+ *
+ * created:
+ * OKI SEMICONDUCTOR 04/14/2010
+ * modified:
+ *
+ */
+
+/* includes */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fs.h>
+#include <linux/uaccess.h>
+#include <linux/string.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/cdev.h>
+#include <linux/device.h>
+
+#include "pch_phub.h"
+
+/*--------------------------------------------
+ macros
+--------------------------------------------*/
+/* Status Register offset */
+#define PHUB_STATUS (0x00)
+/* Control Register offset */
+#define PHUB_CONTROL (0x04)
+/* Time out value for Status Register */
+#define PHUB_TIMEOUT (0x05)
+/* Enabling for writing ROM */
+#define PCH_PHUB_ROM_WRITE_ENABLE (0x01)
+/* Disabling for writing ROM */
+#define PCH_PHUB_ROM_WRITE_DISABLE (0x00)
+/* ROM data area start address offset */
+#define PCH_PHUB_ROM_START_ADDR (0x14)
+/* MAX number of INT_REDUCE_CONTROL registers */
+#define MAX_NUM_INT_REDUCE_CONTROL_REG (128)
+
+/*!
+ @ingroup PHUB_PCILayer
+ @def PCI_DEVICE_ID_PCH1_PHUB
+ @brief Outlines the PCI Device ID.
+ */
+#define PCI_DEVICE_ID_PCH1_PHUB (0x8801)
+
+/*!
+ @ingroup PHUB_PCILayer
+ @def PCH_MINOR_NOS
+ @brief Outlines the Packet Hub minor numbers limit.
+ */
+#define PCH_MINOR_NOS (1)
+
+/*values for configuring CLKCFG reg
+ * for CAN clock of 50Mhz*/
+
+/*!
+ @ingroup PHUB_PCILayer
+ @def CLKCFG_CAN_50MHZ
+ @brief CLKCFG register setting for CAN clock of 50Mhz.
+ */
+#define CLKCFG_CAN_50MHZ (0x12000000)
+
+/*!
+ @ingroup PHUB_PCILayer
+ @def CLKCFG_CANCLK_MASK
+ @brief Bit mask for bit fields in CLKCFG register
+ to set CAN clock to 50Mhz.
+ */
+#define CLKCFG_CANCLK_MASK (0xFF000000)
+
+#define MODULE_NAME "pch_phub"
+
+/*!
+ @ingroup PHUB_HALLayerAPI
+ @def PCH_READ_REG(a)
+ @remarks Implements the functionality of reading register.
+ @param a [@ref IN] Contains the register offset address value
+ @retval Contains the register value
+ */
+#define PCH_READ_REG(a) ioread32((pch_phub_base_address + a))
+
+/*!
+ @ingroup PHUB_HALLayerAPI
+ @def PCH_WRITE_REG(a, b)
+ @remarks Implements the functionality of writing register.
+ @param a [@ref IN] Contains the writing value
+ @param b [@ref IN] Contains the register offset address value
+ @retval NONE
+ */
+#define PCH_WRITE_REG(a, b) iowrite32(a, (pch_phub_base_address + b))
+
+/*--------------------------------------------
+ global variables
+--------------------------------------------*/
+struct pch_phub_reg {
+ u32 phub_id_reg; /* PHUB_ID register val */
+ u32 q_pri_val_reg; /* QUEUE_PRI_VAL register val */
+ u32 rc_q_maxsize_reg; /* RC_QUEUE_MAXSIZE register val */
+ u32 bri_q_maxsize_reg; /* BRI_QUEUE_MAXSIZE register val */
+ u32 comp_resp_timeout_reg; /* COMP_RESP_TIMEOUT register val */
+ u32 bus_slave_control_reg; /* BUS_SLAVE_CONTROL_REG register val */
+ u32 deadlock_avoid_type_reg; /* DEADLOCK_AVOID_TYPE register val */
+ u32 intpin_reg_wpermit_reg0; /* INTPIN_REG_WPERMIT register 0 val */
+ u32 intpin_reg_wpermit_reg1; /* INTPIN_REG_WPERMIT register 1 val */
+ u32 intpin_reg_wpermit_reg2; /* INTPIN_REG_WPERMIT register 2 val */
+ u32 intpin_reg_wpermit_reg3; /* INTPIN_REG_WPERMIT register 3 val */
+ /* INT_REDUCE_CONTROL registers val */
+ u32 int_reduce_control_reg[MAX_NUM_INT_REDUCE_CONTROL_REG];
+#ifdef PCH_CAN_PCLK_50MHZ
+ u32 clkcfg_reg; /* CLK CFG register val */
+#endif
+} g_pch_phub_reg;
+
+s32 pch_phub_opencount; /* check whether opened or not */
+u32 pch_phub_base_address;
+u32 pch_phub_extrom_base_address;
+s32 pch_phub_suspended;
+
+struct device *dev_dbg;
+
+DEFINE_SPINLOCK(pch_phub_lock); /* for spin lock */
+
+/**
+ * file_operations structure initialization
+ */
+const struct file_operations pch_phub_fops = {
+ .owner = THIS_MODULE,
+ .open = pch_phub_open,
+ .release = pch_phub_release,
+ .ioctl = pch_phub_ioctl,
+};
+
+/* ToDo: major number allocation via module parameter */
+static dev_t pch_phub_dev_no;
+static int pch_phub_major_no;
+static struct cdev pch_phub_dev;
+
+
+/*--------------------------------------------
+ exported function prototypes
+--------------------------------------------*/
+/*!
+ @ingroup PHUB_PCILayerAPI
+ @fn static int __devinit pch_phub_probe(struct pci_dev* pch_pci_dev,
+ const struct pci_device_id* pci_id)
+ @brief Provides the functionality of probing the module
+ */
+static int __devinit pch_phub_probe(struct pci_dev *pdev, const
+ struct pci_device_id *id);
+
+/*!
+ @ingroup PHUB_PCILayerAPI
+ @fn static void __devexit pch_phub_remove(
+ struct pci_dev * pch_pci_dev)
+ @brief Provides the functionality of removing the module
+ */
+static void __devexit pch_phub_remove(struct pci_dev *pdev);
+
+/*!
+ @ingroup PHUB_PCILayerAPI
+ @fn static int pch_phub_suspend(struct pci_dev* pDev,
+ pm_message_t state)
+ @brief Provides the functionality of suspending the module
+ */
+static int pch_phub_suspend(struct pci_dev *pdev, pm_message_t state);
+
+/*!
+ @ingroup PHUB_PCILayerAPI
+ @fn static int pch_phub_resume(struct pci_dev* pDev)
+ @brief Provides the functionality of resuming the module
+ */
+static int pch_phub_resume(struct pci_dev *pdev);
+
+/*--------------------------------------------
+ structures
+--------------------------------------------*/
+/*!
+ @ingroup PHUB_PCILayerFacilitators
+ @static struct pci_device_id
+ @brief It is a structure used for perserving information related to
+ the device id.
+ @note The concerned details should be provided as a reference in
+ the pci driver structure.
+ */
+static struct pci_device_id pch_phub_pcidev_id[] = {
+
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PCH1_PHUB)},
+ {0,}
+};
+
+/*!
+ @ingroup PHUB_PCILayerFacilitators
+ @static struct pch_phub_driver
+ @brief It is a structure used for perserving information related to
+ the Packet Hub device and preserves function signatures to
+ manipulate the device.
+ @note The structure contains the various interfaces aspects
+ provided to the pci layer.
+ @see
+ pch_phub_probe
+ pch_phub_suspend
+ pch_phub_resume
+ pch_phub_remove
+ */
+static struct pci_driver pch_phub_driver = {
+ .name = "pch_phub",
+ .id_table = pch_phub_pcidev_id,
+ .probe = pch_phub_probe,
+ .remove = __devexit_p(pch_phub_remove),
+#ifdef CONFIG_PM
+ .suspend = pch_phub_suspend,
+ .resume = pch_phub_resume
+#endif
+};
+
+/*!
+ * @ingroup PHUB_PCILayerAPI
+ * @fn static int __init pch_phub_pci_init(void)
+ * @brief Provides the functionality of initializing the module
+ * */
+static int __init pch_phub_pci_init(void);
+/*!
+ * @ingroup PHUB_PCILayerAPI
+ * @fn static void __exit pch_phub_pci_exit(void)
+ * @brief Provides the functionality of exiting the module
+ * */
+static void __exit pch_phub_pci_exit(void);
+
+MODULE_DESCRIPTION("PCH PACKET HUB PCI Driver");
+MODULE_LICENSE("GPL");
+module_init(pch_phub_pci_init);
+module_exit(pch_phub_pci_exit);
+module_param(pch_phub_major_no, int, S_IRUSR | S_IWUSR);
+
+
+/*--------------------------------------------
+ functions implementations
+--------------------------------------------*/
+/*!
+ @ingroup PHUB_HALLayerAPI
+ @fn void pch_phub_read_modify_write_reg(
+ unsigned long reg_addr_offset,
+ unsigned long data, unsigned long mask)
+ @remarks Implements the functionality of reading, modifying and writing
+ register.
+ @param reg_addr_offset [@ref IN] Contains the register offset address
+ value
+ @param data [@ref IN] Contains the writing value
+ @param mask [@ref IN] Contains the mask value
+ @retval NONE
+ @see
+ */
+void pch_phub_read_modify_write_reg(unsigned long reg_addr_offset,
+ unsigned long data, unsigned long mask)
+{
+ unsigned long reg_addr = pch_phub_base_address + reg_addr_offset;
+ iowrite32(((ioread32(reg_addr) & ~mask)) | data, reg_addr);
+
+ return;
+}
+
+
+/*!
+ @ingroup PHUB_HALLayerAPI
+ @fn void pch_phub_save_reg_conf(void)
+ @remarks saves register configuration
+ @param NONE
+ @retval NONE
+ @see
+ pch_phub_suspend
+ */
+void pch_phub_save_reg_conf(void)
+{
+ u32 i = 0;
+
+ dev_dbg(dev_dbg, "pch_phub_save_reg_conf ENTRY\n");
+ /* to store contents of PHUB_ID register */
+ g_pch_phub_reg.phub_id_reg = PCH_READ_REG(PCH_PHUB_PHUB_ID_REG);
+ /* to store contents of QUEUE_PRI_VAL register */
+ g_pch_phub_reg.q_pri_val_reg = PCH_READ_REG(PCH_PHUB_QUEUE_PRI_VAL_REG);
+ /* to store contents of RC_QUEUE_MAXSIZE register */
+ g_pch_phub_reg.rc_q_maxsize_reg =
+ PCH_READ_REG(PCH_PHUB_RC_QUEUE_MAXSIZE_REG);
+ /* to store contents of BRI_QUEUE_MAXSIZE register */
+ g_pch_phub_reg.bri_q_maxsize_reg =
+ PCH_READ_REG(PCH_PHUB_BRI_QUEUE_MAXSIZE_REG);
+ /* to store contents of COMP_RESP_TIMEOUT register */
+ g_pch_phub_reg.comp_resp_timeout_reg =
+ PCH_READ_REG(PCH_PHUB_COMP_RESP_TIMEOUT_REG);
+ /* to store contents of BUS_SLAVE_CONTROL_REG register */
+ g_pch_phub_reg.bus_slave_control_reg =
+ PCH_READ_REG(PCH_PHUB_BUS_SLAVE_CONTROL_REG);
+ /* to store contents of DEADLOCK_AVOID_TYPE register */
+ g_pch_phub_reg.deadlock_avoid_type_reg =
+ PCH_READ_REG(PCH_PHUB_DEADLOCK_AVOID_TYPE_REG);
+ /* to store contents of INTPIN_REG_WPERMIT register 0 */
+ g_pch_phub_reg.intpin_reg_wpermit_reg0 =
+ PCH_READ_REG(PCH_PHUB_INTPIN_REG_WPERMIT_REG0);
+ /* to store contents of INTPIN_REG_WPERMIT register 1 */
+ g_pch_phub_reg.intpin_reg_wpermit_reg1 =
+ PCH_READ_REG(PCH_PHUB_INTPIN_REG_WPERMIT_REG1);
+ /* to store contents of INTPIN_REG_WPERMIT register 2 */
+ g_pch_phub_reg.intpin_reg_wpermit_reg2 =
+ PCH_READ_REG(PCH_PHUB_INTPIN_REG_WPERMIT_REG2);
+ /* to store contents of INTPIN_REG_WPERMIT register 3 */
+ g_pch_phub_reg.intpin_reg_wpermit_reg3 =
+ PCH_READ_REG(PCH_PHUB_INTPIN_REG_WPERMIT_REG3);
+ dev_dbg(dev_dbg, "pch_phub_save_reg_conf : "
+ "g_pch_phub_reg.phub_id_reg=%x, "
+ "g_pch_phub_reg.q_pri_val_reg=%x, "
+ "g_pch_phub_reg.rc_q_maxsize_reg=%x, "
+ "g_pch_phub_reg.bri_q_maxsize_reg=%x, "
+ "g_pch_phub_reg.comp_resp_timeout_reg=%x, "
+ "g_pch_phub_reg.bus_slave_control_reg=%x, "
+ "g_pch_phub_reg.deadlock_avoid_type_reg=%x, "
+ "g_pch_phub_reg.intpin_reg_wpermit_reg0=%x, "
+ "g_pch_phub_reg.intpin_reg_wpermit_reg1=%x, "
+ "g_pch_phub_reg.intpin_reg_wpermit_reg2=%x, "
+ "g_pch_phub_reg.intpin_reg_wpermit_reg3=%x\n",
+ g_pch_phub_reg.phub_id_reg,
+ g_pch_phub_reg.q_pri_val_reg,
+ g_pch_phub_reg.rc_q_maxsize_reg,
+ g_pch_phub_reg.bri_q_maxsize_reg,
+ g_pch_phub_reg.comp_resp_timeout_reg,
+ g_pch_phub_reg.bus_slave_control_reg,
+ g_pch_phub_reg.deadlock_avoid_type_reg,
+ g_pch_phub_reg.intpin_reg_wpermit_reg0,
+ g_pch_phub_reg.intpin_reg_wpermit_reg1,
+ g_pch_phub_reg.intpin_reg_wpermit_reg2,
+ g_pch_phub_reg.intpin_reg_wpermit_reg3);
+ /* to store contents of INT_REDUCE_CONTROL registers */
+ for (i = 0; i < MAX_NUM_INT_REDUCE_CONTROL_REG; i++) {
+ g_pch_phub_reg.int_reduce_control_reg[i] =
+ PCH_READ_REG(
+ PCH_PHUB_INT_REDUCE_CONTROL_REG_BASE + 4 * i);
+ dev_dbg(dev_dbg, "pch_phub_save_reg_conf : "
+ "g_pch_phub_reg.int_reduce_control_reg[%d]=%x\n",
+ i, g_pch_phub_reg.int_reduce_control_reg[i]);
+ }
+#ifdef PCH_CAN_PCLK_50MHZ
+ /* save clk cfg register */
+ g_pch_phub_reg.clkcfg_reg = PCH_READ_REG(CLKCFG_REG_OFFSET);
+#endif
+ return;
+}
+
+/*!
+ @ingroup PHUB_HALLayerAPI
+ @fn void pch_phub_restore_reg_conf(void)
+ @remarks restore register configuration
+ @param NONE
+ @retval NONE
+ @see
+ pch_phub_resume
+ */
+
+void pch_phub_restore_reg_conf(void)
+{
+ u32 i = 0;
+
+ dev_dbg(dev_dbg, "pch_phub_restore_reg_conf ENTRY\n");
+ /* to store contents of PHUB_ID register */
+ PCH_WRITE_REG(g_pch_phub_reg.phub_id_reg, PCH_PHUB_PHUB_ID_REG);
+ /* to store contents of QUEUE_PRI_VAL register */
+ PCH_WRITE_REG(g_pch_phub_reg.q_pri_val_reg, PCH_PHUB_QUEUE_PRI_VAL_REG);
+ /* to store contents of RC_QUEUE_MAXSIZE register */
+ PCH_WRITE_REG(g_pch_phub_reg.rc_q_maxsize_reg,
+ PCH_PHUB_RC_QUEUE_MAXSIZE_REG);
+ /* to store contents of BRI_QUEUE_MAXSIZE register */
+ PCH_WRITE_REG(g_pch_phub_reg.bri_q_maxsize_reg,
+ PCH_PHUB_BRI_QUEUE_MAXSIZE_REG);
+ /* to store contents of COMP_RESP_TIMEOUT register */
+ PCH_WRITE_REG(g_pch_phub_reg.comp_resp_timeout_reg,
+ PCH_PHUB_COMP_RESP_TIMEOUT_REG);
+ /* to store contents of BUS_SLAVE_CONTROL_REG register */
+ PCH_WRITE_REG(g_pch_phub_reg.bus_slave_control_reg,
+ PCH_PHUB_BUS_SLAVE_CONTROL_REG);
+ /* to store contents of DEADLOCK_AVOID_TYPE register */
+ PCH_WRITE_REG(g_pch_phub_reg.deadlock_avoid_type_reg,
+ PCH_PHUB_DEADLOCK_AVOID_TYPE_REG);
+ /* to store contents of INTPIN_REG_WPERMIT register 0 */
+ PCH_WRITE_REG(g_pch_phub_reg.intpin_reg_wpermit_reg0,
+ PCH_PHUB_INTPIN_REG_WPERMIT_REG0);
+ /* to store contents of INTPIN_REG_WPERMIT register 1 */
+ PCH_WRITE_REG(g_pch_phub_reg.intpin_reg_wpermit_reg1,
+ PCH_PHUB_INTPIN_REG_WPERMIT_REG1);
+ /* to store contents of INTPIN_REG_WPERMIT register 2 */
+ PCH_WRITE_REG(g_pch_phub_reg.intpin_reg_wpermit_reg2,
+ PCH_PHUB_INTPIN_REG_WPERMIT_REG2);
+ /* to store contents of INTPIN_REG_WPERMIT register 3 */
+ PCH_WRITE_REG(g_pch_phub_reg.intpin_reg_wpermit_reg3,
+ PCH_PHUB_INTPIN_REG_WPERMIT_REG3);
+ dev_dbg(dev_dbg, "pch_phub_save_reg_conf : "
+ "g_pch_phub_reg.phub_id_reg=%x, "
+ "g_pch_phub_reg.q_pri_val_reg=%x, "
+ "g_pch_phub_reg.rc_q_maxsize_reg=%x, "
+ "g_pch_phub_reg.bri_q_maxsize_reg=%x, "
+ "g_pch_phub_reg.comp_resp_timeout_reg=%x, "
+ "g_pch_phub_reg.bus_slave_control_reg=%x, "
+ "g_pch_phub_reg.deadlock_avoid_type_reg=%x, "
+ "g_pch_phub_reg.intpin_reg_wpermit_reg0=%x, "
+ "g_pch_phub_reg.intpin_reg_wpermit_reg1=%x, "
+ "g_pch_phub_reg.intpin_reg_wpermit_reg2=%x, "
+ "g_pch_phub_reg.intpin_reg_wpermit_reg3=%x\n",
+ g_pch_phub_reg.phub_id_reg,
+ g_pch_phub_reg.q_pri_val_reg,
+ g_pch_phub_reg.rc_q_maxsize_reg,
+ g_pch_phub_reg.bri_q_maxsize_reg,
+ g_pch_phub_reg.comp_resp_timeout_reg,
+ g_pch_phub_reg.bus_slave_control_reg,
+ g_pch_phub_reg.deadlock_avoid_type_reg,
+ g_pch_phub_reg.intpin_reg_wpermit_reg0,
+ g_pch_phub_reg.intpin_reg_wpermit_reg1,
+ g_pch_phub_reg.intpin_reg_wpermit_reg2,
+ g_pch_phub_reg.intpin_reg_wpermit_reg3);
+ /* to store contents of INT_REDUCE_CONTROL register */
+ for (i = 0; i < MAX_NUM_INT_REDUCE_CONTROL_REG; i++) {
+ PCH_WRITE_REG(g_pch_phub_reg.int_reduce_control_reg[i],
+ PCH_PHUB_INT_REDUCE_CONTROL_REG_BASE + 4 * i);
+ dev_dbg(dev_dbg, "pch_phub_save_reg_conf : "
+ "g_pch_phub_reg.int_reduce_control_reg[%d]=%x\n",
+ i, g_pch_phub_reg.int_reduce_control_reg[i]);
+ }
+
+#ifdef PCH_CAN_PCLK_50MHZ
+ /*restore the clock config reg */
+ PCH_WRITE_REG(g_pch_phub_reg.clkcfg_reg, CLKCFG_REG_OFFSET);
+#endif
+
+ return;
+}
+
+/*!
+ @ingroup PHUB_HALLayerAPI
+ @fn void pch_phub_read_serial_rom
+ (unsigned long offset_address, unsigned char *data)
+ @remarks Implements the functionality of reading Serial ROM.
+ @param unsigned long offset_address
+ [@ref IN] Contains the Serial ROM address offset value
+ @param *data [@ref INOUT] Contains the Serial ROM value
+ @retval returnvalue [@ref OUT] contains the result for the reading
+ Serial ROM attempt
+ @see
+ */
+int pch_phub_read_serial_rom(unsigned long offset_address, unsigned char *data)
+{
+ unsigned long mem_addr = pch_phub_extrom_base_address + offset_address;
+
+ dev_dbg(dev_dbg,
+ "pch_phub_read_serial_rom:mem_addr=0x%08x\n", mem_addr);
+ *data = ioread8(mem_addr);
+
+ return 0;
+}
+
+/*!
+ @ingroup PHUB_HALLayerAPI
+ @fn void pch_phub_write_serial_rom(unsigned long offset_address,
+ unsigned char data)
+ @remarks Implements the functionality of writing Serial ROM.
+ @param unsigned long offset_address
+ [@ref IN] Contains the Serial ROM address offset value
+ @param data [@ref IN] Contains the Serial ROM value
+ @retval returnvalue [@ref OUT] contains the result for
+ the writing Serial ROM attempt
+ @see
+ */
+int pch_phub_write_serial_rom(unsigned long offset_address, unsigned char data)
+{
+ int retval = 0;
+ unsigned long mem_addr = pch_phub_extrom_base_address + offset_address;
+ int i = 0;
+ unsigned long word_data = 0;
+
+ dev_dbg(dev_dbg,
+ "pch_phub_write_serial_rom:mem_addr=0x%08x\n", mem_addr);
+ iowrite32(PCH_PHUB_ROM_WRITE_ENABLE,
+ pch_phub_extrom_base_address + PHUB_CONTROL);
+
+ word_data = ioread32(mem_addr & 0xFFFFFFFC);
+ dev_dbg(dev_dbg, "word_data=0x%08x data=0x%02x\n",
+ word_data, data);
+ switch (mem_addr % 4) {
+ case 0:
+ word_data &= 0xFFFFFF00;
+ iowrite32((word_data | (unsigned long)data),
+ (mem_addr & 0xFFFFFFFC));
+ break;
+ case 1:
+ word_data &= 0xFFFF00FF;
+ iowrite32((word_data | ((unsigned long)data << 8)),
+ (mem_addr & 0xFFFFFFFC));
+ break;
+ case 2:
+ word_data &= 0xFF00FFFF;
+ iowrite32((word_data | ((unsigned long)data << 16)),
+ (mem_addr & 0xFFFFFFFC));
+ break;
+ case 3:
+ word_data &= 0x00FFFFFF;
+ iowrite32((word_data | ((unsigned long)data << 24)),
+ (mem_addr & 0xFFFFFFFC));
+ break;
+ }
+ while (0x00 !=
+ ioread8(pch_phub_extrom_base_address + PHUB_STATUS)) {
+ msleep(1);
+ if (PHUB_TIMEOUT == i) {
+ retval = -EPERM;
+ break;
+ }
+ i++;
+ }
+
+ iowrite32(PCH_PHUB_ROM_WRITE_DISABLE,
+ pch_phub_extrom_base_address + PHUB_CONTROL);
+
+ return retval;
+}
+
+/*!
+ @ingroup PHUB_HALLayerAPI
+ @fn void pch_phub_read_serial_rom_val(unsigned long offset_address,
+ unsigned char *data)
+ @remarks Implements the functionality of reading Serial ROM value.
+ @param unsigned long offset_address
+ [@ref IN] Contains the Serial ROM address offset value
+ @param *data [@ref INOUT] Contains the Serial ROM value
+ @retval returnvalue [@ref OUT] contains the result for
+ the reading Serial ROM attempt
+ @see
+ */
+int pch_phub_read_serial_rom_val(unsigned long offset_address,
+ unsigned char *data)
+{
+ int retval = 0;
+ unsigned long mem_addr;
+
+ mem_addr = (offset_address / 4 * 8) + 3 -
+ (offset_address % 4) + PCH_PHUB_ROM_START_ADDR;
+ retval = pch_phub_read_serial_rom(mem_addr, data);
+
+ return retval;
+}
+
+/*!
+ @ingroup PHUB_HALLayerAPI
+ @fn void pch_phub_write_serial_rom_val(unsigned long offset_address,
+ unsigned char data)
+ @remarks Implements the functionality of writing Serial ROM value.
+ @param unsigned long offset_address
+ [@ref IN] Contains the Serial ROM address offset value
+ @param data [@ref IN] Contains the Serial ROM value
+ @retval returnvalue [@ref OUT] contains the result for
+ the writing Serial ROM attempt
+ @see
+ */
+int pch_phub_write_serial_rom_val(unsigned long offset_address,
+ unsigned char data)
+{
+ int retval = 0;
+ unsigned long mem_addr;
+
+ mem_addr =
+ (offset_address / 4 * 8) + 3 - (offset_address % 4) +
+ PCH_PHUB_ROM_START_ADDR;
+ retval = pch_phub_write_serial_rom(mem_addr, data);
+
+ return retval;
+}
+
+/*!
+ @ingroup PHUB_HALLayerAPI
+ @fn int pch_phub_gbe_serial_rom_conf(void)
+ @remarks makes Serial ROM header format configuration
+ for Gigabit Ethernet MAC address
+ @param NONE
+ @retval returnvalue [@ref OUT] contains the result for
+ the writing Serial ROM attempt
+ @see
+ */
+int pch_phub_gbe_serial_rom_conf(void)
+{
+ int retval = 0;
+
+ retval |= pch_phub_write_serial_rom(0x0b, 0xbc);
+ retval |= pch_phub_write_serial_rom(0x0a, 0x10);
+ retval |= pch_phub_write_serial_rom(0x09, 0x01);
+ retval |= pch_phub_write_serial_rom(0x08, 0x02);
+
+ retval |= pch_phub_write_serial_rom(0x0f, 0x00);
+ retval |= pch_phub_write_serial_rom(0x0e, 0x00);
+ retval |= pch_phub_write_serial_rom(0x0d, 0x00);
+ retval |= pch_phub_write_serial_rom(0x0c, 0x80);
+
+ retval |= pch_phub_write_serial_rom(0x13, 0xbc);
+ retval |= pch_phub_write_serial_rom(0x12, 0x10);
+ retval |= pch_phub_write_serial_rom(0x11, 0x01);
+ retval |= pch_phub_write_serial_rom(0x10, 0x18);
+
+ retval |= pch_phub_write_serial_rom(0x1b, 0xbc);
+ retval |= pch_phub_write_serial_rom(0x1a, 0x10);
+ retval |= pch_phub_write_serial_rom(0x19, 0x01);
+ retval |= pch_phub_write_serial_rom(0x18, 0x19);
+
+ retval |= pch_phub_write_serial_rom(0x23, 0xbc);
+ retval |= pch_phub_write_serial_rom(0x22, 0x10);
+ retval |= pch_phub_write_serial_rom(0x21, 0x01);
+ retval |= pch_phub_write_serial_rom(0x20, 0x3a);
+
+ retval |= pch_phub_write_serial_rom(0x27, 0x01);
+ retval |= pch_phub_write_serial_rom(0x26, 0x00);
+ retval |= pch_phub_write_serial_rom(0x25, 0x00);
+ retval |= pch_phub_write_serial_rom(0x24, 0x00);
+
+ return retval;
+}
+/*!
+ @ingroup PHUB_HALLayerAPI
+ @fn int pch_phub_read_gbe_mac_addr(unsigned long offset_address,
+ unsigned char *data)
+ @param unsigned long offset_address
+ [@ref IN] Contains the Gigabit Ethernet MAC address offset value
+ @param *data
+ [@ref INOUT] Contains the Gigabit Ethernet MAC address value
+ @retval return value [@ref OUT] contains the result
+ for the reading Gigabit Ethernet MAC address attempt
+ @see
+ */
+int pch_phub_read_gbe_mac_addr(unsigned long offset_address,
+ unsigned char *data)
+{
+ int retval = 0;
+
+ retval = pch_phub_read_serial_rom_val(offset_address, data);
+
+ return retval;
+}
+
+/*!
+ @ingroup PHUB_HALLayerAPI
+ @fn int pch_phub_write_gbe_mac_addr(unsigned long offset_address,
+ unsigned char data)
+ @param unsigned long offset_address
+ [@ref IN] Contains the Gigabit Ethernet MAC address offset value
+ @param data [@ref IN] Contains the Gigabit Ethernet MAC address value
+ @retval return value [@ref OUT] contains the result for the
+ writing Gigabit Ethernet MAC address attempt
+ @see
+ */
+int pch_phub_write_gbe_mac_addr(unsigned long offset_address,
+ unsigned char data)
+{
+ int retval = 0;
+
+ retval = pch_phub_gbe_serial_rom_conf();
+ retval |= pch_phub_write_serial_rom_val(offset_address, data);
+
+ return retval;
+}
+
+/*!
+ @ingroup PHUB_InterfaceLayerAPI
+ @fn int pch_phub_open( struct inode *inode,struct file *file)
+ @remarks Implements the Initializing and opening of
+ the Packet Hub module.
+ @param inode
+ [@ref INOUT] Contains the reference of the inode structure
+ @param file
+ [@ref INOUT] Contains the reference of the file structure
+ @retval returnvalue
+ [@ref OUT] contains the result for the concerned attempt.
+ The result would generally comprise of success code
+ or failure code. The failure code will indicate reason for
+ failure.
+ @see
+ EBUSY
+ */
+int pch_phub_open(struct inode *inode, struct file *file)
+{
+ int ret;
+
+ spin_lock(&pch_phub_lock);
+ dev_dbg(dev_dbg, "pch_phub_open : open count value = %d",
+ pch_phub_opencount);
+ if (pch_phub_opencount) {
+ dev_dbg(dev_dbg, "pch_phub_open : device already opened\n");
+ ret = -EBUSY;
+ } else {
+ pch_phub_opencount++;
+ ret = 0;
+ }
+ spin_unlock(&pch_phub_lock);
+
+ dev_dbg(dev_dbg, "pch_phub_open returns=%d\n", ret);
+ return ret;
+}
+
+/*!
+ @ingroup PHUB_InterfaceLayerAPI
+ @fn int pch_phub_release(struct inode *inode,struct file *file)
+ @remarks Implements the release functionality of the Packet Hub module.
+ @param inode
+ [@ref INOUT] Contains the reference of the inode structure
+ @param file
+ [@ref INOUT] Contains the reference of the file structure
+ @retval returnvalue
+ [@ref OUT] contains the result for the concerned attempt.
+ The result would generally comprise of success code or failure
+ code. The failure code will indicate reason for failure.
+ @see
+ SUCCESS
+ */
+int pch_phub_release(struct inode *inode, struct file *file)
+{
+ spin_lock(&pch_phub_lock);
+
+ if (pch_phub_opencount > 0)
+ pch_phub_opencount--;
+ spin_unlock(&pch_phub_lock);
+
+ dev_dbg(dev_dbg, "pch_phub_release : "
+ "pch_phub_opencount=%d returning=%d\n",
+ pch_phub_opencount, 0);
+ return 0;
+}
+
+/*!
+ @ingroup PHUB_InterfaceLayerAPI
+ @fn int pch_phub_ioctl(struct inode * inode,struct file * file,
+ unsigned int cmd,unsigned long arg)
+ @remarks Implements the various ioctl functionalities of
+ the Packet Hub module.
+ @param inode
+ [@ref INOUT] Contains the reference of the inode structure
+ @param file
+ [@ref INOUT] Contains the reference of the file structure
+ @param cmd [@ref IN] Contains the command value
+ @param arg [@ref IN] Contains the command argument value
+ @retval returnvalue
+ [@ref OUT] contains the result for the concerned attempt.
+ The result would generally comprise of success code or failure
+ code. The failure code will indicate reason for failure.
+ @see
+ EINVAL
+ EFAULT
+ */
+#if 0
+int pch_phub_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ int ret_value = 0;
+ struct pch_phub_reqt *p_pch_phub_reqt;
+ unsigned long addr_offset;
+ unsigned long data;
+ unsigned long mask;
+
+ do {
+ if (pch_phub_suspended == true) {
+ dev_dbg(dev_dbg, "pch_phub_ioctl : "
+ "suspend initiated returning =%d\n",
+ -EPERM);
+ ret_value = -EPERM;
+ break;
+ }
+
+ p_pch_phub_reqt = (struct pch_phub_reqt *)arg;
+ ret_value =
+ copy_from_user((void *)&addr_offset,
+ (void *)&p_pch_phub_reqt->addr_offset,
+ sizeof(addr_offset));
+ if (ret_value) {
+ dev_dbg(dev_dbg, "pch_phub_ioctl : "
+ "copy_from_user fail returning =%d\n",
+ -EFAULT);
+ ret_value = -EFAULT;
+ break;
+ }
+ dev_dbg(dev_dbg, "pch_phub_ioctl : "
+ "copy_from_user returns =%d\n", ret_value);
+
+ /* Access area check */
+ switch (cmd) {
+ case IOCTL_PHUB_READ_REG:
+ case IOCTL_PHUB_WRITE_REG:
+ case IOCTL_PHUB_READ_MODIFY_WRITE_REG:
+ if (addr_offset >= 0x504)
+ ret_value = -EPERM;
+ break;
+ case IOCTL_PHUB_READ_OROM:
+ case IOCTL_PHUB_WRITE_OROM:
+ case IOCTL_PHUB_READ_MAC_ADDR:
+ case IOCTL_PHUB_WRITE_MAC_ADDR:
+ if (addr_offset >= 0x10000)
+ ret_value = -EPERM;
+ break;
+ }
+ if (ret_value) {
+ dev_dbg(dev_dbg, "pch_phub_ioctl : "
+ "access area is wrong returning =%d\n",
+ -EPERM);
+ break;
+ }
+ /* End of Access area check */
+
+ switch (cmd) {
+ case IOCTL_PHUB_READ_REG:
+ data = PCH_READ_REG(addr_offset);
+ dev_dbg(dev_dbg, "pch_phub_ioctl : Invoked "
+ "PCH_READ_REG successfully\n");
+
+ ret_value =
+ copy_to_user((void *)&p_pch_phub_reqt->data,
+ (void *)&data, sizeof(data));
+ if (ret_value) {
+ dev_dbg(dev_dbg, "pch_phub_ioctl : "
+ "copy_to_user fail returning =%d\n",
+ -EFAULT);
+ ret_value = -EFAULT;
+ break;
+ }
+ break;
+ case IOCTL_PHUB_WRITE_REG:
+ ret_value = copy_from_user((void *)&data,
+ (void *)&p_pch_phub_reqt->data,
+ sizeof(data));
+ if (ret_value) {
+ dev_dbg(dev_dbg, "pch_phub_ioctl : "
+ "copy_from_user fail returning =%d\n", -EFAULT);
+ ret_value = -EFAULT;
+ break;
+ }
+ PCH_WRITE_REG(data, addr_offset);
+ dev_dbg(dev_dbg, "pch_phub_ioctl : Invoked "
+ "PCH_WRITE_REG successfully\n");
+ break;
+ case IOCTL_PHUB_READ_MODIFY_WRITE_REG:
+ ret_value = copy_from_user((void *)&data,
+ (void *)&p_pch_phub_reqt->
+ data, sizeof(data));
+ if (ret_value) {
+ dev_dbg(dev_dbg, "pch_phub_ioctl : "
+ "copy_from_user fail "
+ "returning =%d\n", -EFAULT);
+ ret_value = -EFAULT;
+ break;
+ }
+ ret_value = copy_from_user((void *)&mask,
+ (void *)&p_pch_phub_reqt->
+ mask, sizeof(mask));
+ if (ret_value) {
+ dev_dbg(dev_dbg, "pch_phub_ioctl : "
+ "copy_from_user fail "
+ "returning =%d\n", -EFAULT);
+ ret_value = -EFAULT;
+ break;
+ }
+ pch_phub_read_modify_write_reg(addr_offset, data, mask);
+ dev_dbg(dev_dbg, "pch_phub_ioctl : Invoked "
+ "pch_phub_read_modify_write_reg "
+ "successfully\n");
+ break;
+ case IOCTL_PHUB_READ_OROM:
+ ret_value = pch_phub_read_serial_rom(addr_offset,
+ (unsigned char *)&data);
+ if (ret_value) {
+ dev_dbg(dev_dbg,
+ "pch_phub_ioctl : Invoked "
+ "pch_phub_read_serial_rom "
+ "=%d\n", -EFAULT);
+ ret_value = -EFAULT;
+ break;
+ } else {
+ dev_dbg(dev_dbg, "pch_phub_ioctl : Invoked "
+ "pch_phub_read_serial_rom "
+ "successfully\n");
+ }
+ ret_value = copy_to_user((void *)&p_pch_phub_reqt->
+ data, (void *)&data,
+ sizeof(data));
+ if (ret_value) {
+ dev_dbg(dev_dbg, "pch_phub_ioctl : "
+ "copy_to_user fail returning "
+ "=%d\n", -EFAULT);
+ ret_value = -EFAULT;
+ break;
+ }
+ break;
+ case IOCTL_PHUB_WRITE_OROM:
+ ret_value =
+ copy_from_user((void *)&data,
+ (void *)&p_pch_phub_reqt->
+ data, sizeof(data));
+ if (ret_value) {
+ dev_dbg(dev_dbg, "pch_phub_ioctl : "
+ "copy_from_user fail returning "
+ "=%d\n", -EFAULT);
+ ret_value = -EFAULT;
+ break;
+ }
+ ret_value =
+ pch_phub_write_serial_rom(addr_offset, data);
+ if (ret_value) {
+ dev_dbg(dev_dbg,
+ "pch_phub_ioctl : Invoked "
+ "pch_phub_write_serial_rom "
+ "=%d\n", -EFAULT);
+ ret_value = -EFAULT;
+ break;
+ } else {
+ dev_dbg(dev_dbg, "pch_phub_ioctl : Invoked "
+ "pch_phub_write_serial_rom "
+ "successfully\n");
+ }
+ break;
+ case IOCTL_PHUB_READ_MAC_ADDR:
+ pch_phub_read_gbe_mac_addr(addr_offset,
+ (unsigned char *)&data);
+ dev_dbg(dev_dbg, "pch_phub_ioctl : Invoked "
+ "pch_phub_read_gbe_mac_addr successfully\n");
+
+ ret_value =
+ copy_to_user((void *)&p_pch_phub_reqt->data,
+ (void *)&data, sizeof(data));
+ if (ret_value) {
+ dev_dbg(dev_dbg, "pch_phub_ioctl : "
+ "copy_to_user fail "
+ "returning =%d\n", -EFAULT);
+ ret_value = -EFAULT;
+ break;
+ }
+ break;
+ case IOCTL_PHUB_WRITE_MAC_ADDR:
+ ret_value =
+ copy_from_user((void *)&data,
+ (void *)&p_pch_phub_reqt->data,
+ sizeof(data));
+ if (ret_value) {
+ dev_dbg(dev_dbg, "pch_phub_ioctl : "
+ "copy_from_user fail "
+ "returning =%d\n", -EFAULT);
+ ret_value = -EFAULT;
+ break;
+ }
+ pch_phub_write_gbe_mac_addr(addr_offset, data);
+ dev_dbg(dev_dbg, "pch_phub_ioctl : Invoked "
+ "pch_phub_write_gbe_mac_addr "
+ "successfully\n");
+ break;
+ default:
+ dev_dbg(dev_dbg, "pch_write_ioctl invalid "
+ "command returning=%d\n", -EINVAL);
+ ret_value = -EINVAL;
+ break;
+ }
+ break;
+
+ } while (0);
+
+
+ dev_dbg(dev_dbg, "pch_write_ioctl returns=%d\n", ret_value);
+ return ret_value;
+}
+#endif
+int pch_phub_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ int ret_value = 0;
+ struct pch_phub_reqt *p_pch_phub_reqt;
+ unsigned long addr_offset;
+ unsigned long data;
+ unsigned long mask;
+
+ if (pch_phub_suspended == true) {
+ dev_dbg(dev_dbg, "pch_phub_ioctl : "
+ "suspend initiated returning =%d\n", -EPERM);
+ ret_value = -EPERM;
+ goto return_ioctrl;
+ }
+
+ p_pch_phub_reqt = (struct pch_phub_reqt *)arg;
+ ret_value = copy_from_user((void *)&addr_offset,
+ (void *)&p_pch_phub_reqt->addr_offset,
+ sizeof(addr_offset));
+ if (ret_value) {
+ dev_dbg(dev_dbg, "pch_phub_ioctl : "
+ "copy_from_user fail returning =%d\n", -EFAULT);
+ ret_value = -EFAULT;
+ goto return_ioctrl;
+ }
+ dev_dbg(dev_dbg, "pch_phub_ioctl : "
+ "copy_from_user returns =%d\n", ret_value);
+
+ /* Access area check */
+ switch (cmd) {
+ case IOCTL_PHUB_READ_REG:
+ case IOCTL_PHUB_WRITE_REG:
+ case IOCTL_PHUB_READ_MODIFY_WRITE_REG:
+ if (addr_offset >= 0x504)
+ ret_value = -EPERM;
+ break;
+ case IOCTL_PHUB_READ_OROM:
+ case IOCTL_PHUB_WRITE_OROM:
+ case IOCTL_PHUB_READ_MAC_ADDR:
+ case IOCTL_PHUB_WRITE_MAC_ADDR:
+ if (addr_offset >= 0x10000)
+ ret_value = -EPERM;
+ break;
+ }
+ if (ret_value) {
+ dev_dbg(dev_dbg, "pch_phub_ioctl : "
+ "access area is wrong returning =%d\n", -EPERM);
+ goto return_ioctrl;
+ }
+ /* End of Access area check */
+
+ switch (cmd) {
+ case IOCTL_PHUB_READ_REG:
+ data = PCH_READ_REG(addr_offset);
+ dev_dbg(dev_dbg, "pch_phub_ioctl : Invoked "
+ "PCH_READ_REG successfully\n");
+
+ ret_value = copy_to_user((void *)&p_pch_phub_reqt->data,
+ (void *)&data, sizeof(data));
+ if (ret_value) {
+ dev_dbg(dev_dbg, "pch_phub_ioctl : "
+ "copy_to_user fail returning =%d\n", -EFAULT);
+ ret_value = -EFAULT;
+ break;
+ }
+ break;
+ case IOCTL_PHUB_WRITE_REG:
+ ret_value = copy_from_user((void *)&data,
+ (void *)&p_pch_phub_reqt->data,
+ sizeof(data));
+ if (ret_value) {
+ dev_dbg(dev_dbg, "pch_phub_ioctl : "
+ "copy_from_user fail returning =%d\n", -EFAULT);
+ ret_value = -EFAULT;
+ break;
+ }
+ PCH_WRITE_REG(data, addr_offset);
+ dev_dbg(dev_dbg, "pch_phub_ioctl : Invoked "
+ "PCH_WRITE_REG successfully\n");
+ break;
+ case IOCTL_PHUB_READ_MODIFY_WRITE_REG:
+ ret_value = copy_from_user((void *)&data,
+ (void *)&p_pch_phub_reqt->data, sizeof(data));
+ if (ret_value) {
+ dev_dbg(dev_dbg, "pch_phub_ioctl : copy_from_user fail "
+ "returning =%d\n", -EFAULT);
+ ret_value = -EFAULT;
+ break;
+ }
+ ret_value = copy_from_user((void *)&mask,
+ (void *)&p_pch_phub_reqt->mask, sizeof(mask));
+ if (ret_value) {
+ dev_dbg(dev_dbg, "pch_phub_ioctl : copy_from_user fail "
+ "returning =%d\n", -EFAULT);
+ ret_value = -EFAULT;
+ break;
+ }
+ pch_phub_read_modify_write_reg(addr_offset, data, mask);
+ dev_dbg(dev_dbg, "pch_phub_ioctl : Invoked "
+ "pch_phub_read_modify_write_reg successfully\n");
+ break;
+ case IOCTL_PHUB_READ_OROM:
+ ret_value = pch_phub_read_serial_rom(addr_offset,
+ (unsigned char *)&data);
+ if (ret_value) {
+ dev_dbg(dev_dbg, "pch_phub_ioctl : Invoked "
+ "pch_phub_read_serial_rom =%d\n", -EFAULT);
+ ret_value = -EFAULT;
+ break;
+ } else {
+ dev_dbg(dev_dbg, "pch_phub_ioctl : Invoked "
+ "pch_phub_read_serial_rom successfully\n");
+ }
+ ret_value = copy_to_user((void *)&p_pch_phub_reqt->data,
+ (void *)&data, sizeof(data));
+ if (ret_value) {
+ dev_dbg(dev_dbg, "pch_phub_ioctl : "
+ "copy_to_user fail returning =%d\n", -EFAULT);
+ ret_value = -EFAULT;
+ break;
+ }
+ break;
+ case IOCTL_PHUB_WRITE_OROM:
+ ret_value = copy_from_user((void *)&data,
+ (void *)&p_pch_phub_reqt->data, sizeof(data));
+ if (ret_value) {
+ dev_dbg(dev_dbg, "pch_phub_ioctl : "
+ "copy_from_user fail returning =%d\n", -EFAULT);
+ ret_value = -EFAULT;
+ break;
+ }
+ ret_value = pch_phub_write_serial_rom(addr_offset, data);
+ if (ret_value) {
+ dev_dbg(dev_dbg, "pch_phub_ioctl : Invoked "
+ "pch_phub_write_serial_rom =%d\n", -EFAULT);
+ ret_value = -EFAULT;
+ break;
+ } else {
+ dev_dbg(dev_dbg, "pch_phub_ioctl : Invoked "
+ "pch_phub_write_serial_rom successfully\n");
+ }
+ break;
+ case IOCTL_PHUB_READ_MAC_ADDR:
+ pch_phub_read_gbe_mac_addr(addr_offset, (unsigned char *)&data);
+ dev_dbg(dev_dbg, "pch_phub_ioctl : Invoked "
+ "pch_phub_read_gbe_mac_addr successfully\n");
+
+ ret_value = copy_to_user((void *)&p_pch_phub_reqt->data,
+ (void *)&data, sizeof(data));
+ if (ret_value) {
+ dev_dbg(dev_dbg, "pch_phub_ioctl : copy_to_user fail "
+ "returning =%d\n", -EFAULT);
+ ret_value = -EFAULT;
+ break;
+ }
+ break;
+ case IOCTL_PHUB_WRITE_MAC_ADDR:
+ ret_value = copy_from_user((void *)&data,
+ (void *)&p_pch_phub_reqt->data, sizeof(data));
+ if (ret_value) {
+ dev_dbg(dev_dbg, "pch_phub_ioctl : copy_from_user fail "
+ "returning =%d\n", -EFAULT);
+ ret_value = -EFAULT;
+ break;
+ }
+ pch_phub_write_gbe_mac_addr(addr_offset, data);
+ dev_dbg(dev_dbg, "pch_phub_ioctl : Invoked "
+ "pch_phub_write_gbe_mac_addr successfully\n");
+ break;
+ default:
+ dev_dbg(dev_dbg, "pch_write_ioctl invalid "
+ "command returning=%d\n", -EINVAL);
+ ret_value = -EINVAL;
+ break;
+ }
+return_ioctrl:
+ dev_dbg(dev_dbg, "pch_write_ioctl returns=%d\n", ret_value);
+ return ret_value;
+}
+
+/*!
+ @ingroup PHUB_PCILayerAPI
+ @fn static int __init pch_phub_pci_init(void)
+ @remarks Implements the initialization functionality of the module.
+ @param NONE
+ @retval returnvalue
+ [@ref OUT] contains the result for the concerned attempt.
+ The result would generally comprise of success code or
+ failure code. The failure code will indicate reason for failure.
+ @see
+ pch_phub_pci_exit
+ */
+static int __init pch_phub_pci_init(void)
+{
+ s32 ret;
+ ret = pci_register_driver(&pch_phub_driver);
+ dev_dbg(dev_dbg, "pch_phub_pci_init : "
+ "Invoked pci_register_driver successfully "
+ "returns = %d\n", ret);
+ return ret;
+}
+
+/*!
+ @ingroup PHUB_PCILayerAPI
+ @fn static void __exit pch_phub_pci_exit(void)
+ @remarks Implements the exit functionality of the module.
+ @param NONE
+ @retval returnvalue
+ [@ref OUT] contains the result for the concerned attempt.
+ The result would generally comprise of success code or failure
+ code. The failure code will indicate reason for failure.
+ @see
+ pch_phub_pci_init
+ */
+static void __exit pch_phub_pci_exit(void)
+{
+ pci_unregister_driver(&pch_phub_driver);
+ dev_dbg(dev_dbg, "pch_phub_pci_exit : "
+ "Invoked pci_unregister_driver successfully\n");
+}
+
+/*!
+ @ingroup PHUB_PCILayerAPI
+ @fn static int __devinit pch_phub_probe(struct pci_dev* pdev,
+ const struct pci_device_id* id)
+ @remarks Implements the probe functionality of the module.
+ @param pdev
+ [@ref INOUT] Contains the reference of the pci_dev structure
+ @param id
+ [@ref INOUT] Contains the reference of
+ the pci_device_id structure
+ @retval returnvalue
+ [@ref OUT] contains the result for the concerned attempt.
+ The result would generally comprise of success code or failure
+ code. The failure code will indicate reason for failure.
+ @see
+ pch_phub_pci_init
+ */
+static int __devinit pch_phub_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+
+ char *DRIVER_NAME = "pch_phub";
+ int ret;
+ unsigned int rom_size;
+
+ dev_dbg = &pdev->dev;
+
+ pch_phub_major_no = (pch_phub_major_no < 0 || pch_phub_major_no > 254) ?
+ 0 : pch_phub_major_no;
+
+ ret = pci_enable_device(pdev);
+ if (ret) {
+ dev_dbg(dev_dbg, "\npch_phub_probe : pci_enable_device FAILED");
+ goto err_probe;
+ }
+ dev_dbg(dev_dbg, "pch_phub_probe : "
+ "pci_enable_device returns %d\n", ret);
+
+ ret = pci_request_regions(pdev, DRIVER_NAME);
+ if (ret) {
+ dev_dbg(dev_dbg, "pch_phub_probe : pci_request_regions FAILED");
+ pci_disable_device(pdev);
+ goto err_probe;
+ }
+ dev_dbg(dev_dbg, "pch_phub_probe : "
+ "pci_request_regions returns %d\n", ret);
+
+ pch_phub_base_address = (unsigned long)pci_iomap(pdev, 1, 0);
+
+ if (pch_phub_base_address == 0) {
+ dev_dbg(dev_dbg, "pch_phub_probe : pci_iomap FAILED");
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ ret = -ENOMEM;
+ goto err_probe;
+ }
+ dev_dbg(dev_dbg, "pch_phub_probe : pci_iomap SUCCESS and value "
+ "in pch_phub_base_address variable is 0x%08x\n",
+ pch_phub_base_address);
+
+ pch_phub_extrom_base_address =
+ (unsigned long)pci_map_rom(pdev, &rom_size);
+ if (pch_phub_extrom_base_address == 0) {
+ dev_dbg(dev_dbg, "pch_phub_probe : pci_map_rom FAILED");
+ pci_iounmap(pdev, (void *)pch_phub_base_address);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ ret = -ENOMEM;
+ goto err_probe;
+ }
+ dev_dbg(dev_dbg, "pch_phub_probe : "
+ "pci_map_rom SUCCESS and value in "
+ "pch_phub_extrom_base_address variable is 0x%08x\n",
+ pch_phub_extrom_base_address);
+
+ if (pch_phub_major_no) {
+ pch_phub_dev_no = MKDEV(pch_phub_major_no, 0);
+ ret = register_chrdev_region(pch_phub_dev_no,
+ PCH_MINOR_NOS, DRIVER_NAME);
+ if (ret) {
+ dev_dbg(dev_dbg, "pch_phub_probe : "
+ "register_chrdev_region FAILED");
+ pci_unmap_rom(pdev,
+ (void *)pch_phub_extrom_base_address);
+ pci_iounmap(pdev, (void *)pch_phub_base_address);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ goto err_probe;
+ }
+ dev_dbg(dev_dbg, "pch_phub_probe : "
+ "register_chrdev_region returns %d\n", ret);
+ } else {
+ ret = alloc_chrdev_region(&pch_phub_dev_no, 0,
+ PCH_MINOR_NOS, DRIVER_NAME);
+ if (ret) {
+ dev_dbg(dev_dbg, "pch_phub_probe : "
+ "alloc_chrdev_region FAILED");
+ pci_unmap_rom(pdev,
+ (void *)pch_phub_extrom_base_address);
+ pci_iounmap(pdev,
+ (void *)pch_phub_base_address);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ goto err_probe;
+ }
+ dev_dbg(dev_dbg, "pch_phub_probe : "
+ "alloc_chrdev_region returns %d\n", ret);
+ }
+
+ cdev_init(&pch_phub_dev, &pch_phub_fops);
+ dev_dbg(dev_dbg, "pch_phub_probe : cdev_init invoked successfully\n");
+
+ pch_phub_dev.owner = THIS_MODULE;
+ pch_phub_dev.ops = &pch_phub_fops;
+
+ ret = cdev_add(&pch_phub_dev, pch_phub_dev_no, PCH_MINOR_NOS);
+ if (ret) {
+ dev_dbg(dev_dbg, "pch_phub_probe : cdev_add FAILED");
+ unregister_chrdev_region(pch_phub_dev_no, PCH_MINOR_NOS);
+ pci_unmap_rom(pdev, (void *)pch_phub_extrom_base_address);
+ pci_iounmap(pdev, (void *)pch_phub_base_address);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ goto err_probe;
+ }
+ dev_dbg(dev_dbg, "pch_phub_probe : cdev_add returns %d\n", ret);
+
+#ifdef PCH_CAN_PCLK_50MHZ
+ /*set the clock config reg if CAN clock is 50Mhz */
+ dev_dbg(dev_dbg, "pch_phub_probe : invoking "
+ "pch_phub_read_modify_write_reg "
+ "to set CLKCFG reg for CAN clk 50Mhz\n");
+ pch_phub_read_modify_write_reg(CLKCFG_REG_OFFSET,
+ CLKCFG_CAN_50MHZ, CLKCFG_CANCLK_MASK);
+#endif
+ /* set the prefech value */
+ PCH_WRITE_REG(0x000ffffa, 0x14);
+ /* set the interrupt delay value */
+ PCH_WRITE_REG(0x25, 0x44);
+ return 0;
+
+err_probe:
+ dev_dbg(dev_dbg, "pch_phub_probe returns %d\n", ret);
+ return ret;
+}
+
+/*!
+ @ingroup PHUB_PCILayerAPI
+ @fn static void __devexit pch_phub_remove(struct pci_dev * pdev)
+ @remarks Implements the remove functionality of the module.
+ @param pdev
+ [@ref INOUT] Contains the reference of the pci_dev structure
+ @retval returnvalue
+ [@ref OUT] contains the result for the concerned attempt.
+ The result would generally comprise of success code or failure
+ code. The failure code will indicate reason for failure.
+ @see
+ pch_phub_pci_init
+ */
+static void __devexit pch_phub_remove(struct pci_dev *pdev)
+{
+
+ cdev_del(&pch_phub_dev);
+ dev_dbg(dev_dbg, "pch_phub_remove - cdev_del Invoked successfully\n");
+
+ unregister_chrdev_region(pch_phub_dev_no, PCH_MINOR_NOS);
+ dev_dbg(dev_dbg, "pch_phub_remove - "
+ "unregister_chrdev_region Invoked successfully\n");
+
+ pci_unmap_rom(pdev, (void *)pch_phub_extrom_base_address);
+
+ pci_iounmap(pdev, (void *)pch_phub_base_address);
+
+ dev_dbg(dev_dbg, "pch_phub_remove - "
+ "pci_iounmap Invoked successfully\n");
+
+ pci_release_regions(pdev);
+ dev_dbg(dev_dbg, "pch_phub_remove - "
+ "pci_release_regions Invoked successfully\n");
+
+ pci_disable_device(pdev);
+ dev_dbg(dev_dbg, "pch_phub_remove - "
+ "pci_disable_device Invoked successfully\n");
+
+}
+
+#ifdef CONFIG_PM
+
+/*!
+ @ingroup PHUB_PCILayerAPI
+ @fn static int pch_phub_suspend(struct pci_dev* pdev,
+ pm_message_t state)
+ @remarks Implements the suspend functionality of the module.
+ @param pdev
+ [@ref INOUT] Contains the reference of the pci_dev structure
+ @param state [@ref INOUT] Contains the reference of
+ the pm_message_t structure
+ @retval returnvalue
+ [@ref OUT] contains the result for the concerned attempt.
+ The result would generally comprise of success code or failure
+ code. The failure code will indicate reason for failure.
+ @see
+ pch_phub_pci_init
+ pch_phub_resume
+ */
+static int pch_phub_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ int ret;
+
+ pch_phub_suspended = true; /* For blocking further IOCTLs */
+
+ pch_phub_save_reg_conf();
+ dev_dbg(dev_dbg, "pch_phub_suspend - "
+ "pch_phub_save_reg_conf Invoked successfully\n");
+
+ ret = pci_save_state(pdev);
+ if (ret) {
+ dev_dbg(dev_dbg,
+ " pch_phub_suspend -pci_save_state returns-%d\n", ret);
+ return ret;
+ }
+ dev_dbg(dev_dbg, "pch_phub_suspend - pci_save_state returns %d\n", ret);
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ dev_dbg(dev_dbg, "pch_phub_suspend - "
+ "pci_enable_wake Invoked successfully\n");
+
+ pci_disable_device(pdev);
+ dev_dbg(dev_dbg, "pch_phub_suspend - "
+ "pci_disable_device Invoked successfully\n");
+
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+ dev_dbg(dev_dbg, "pch_phub_suspend - "
+ "pci_set_power_state Invoked successfully "
+ "return = %d\n", 0);
+
+ return 0;
+}
+
+/*!
+ @ingroup PHUB_PCILayerAPI
+ @fn static int pch_phub_resume(struct pci_dev* pdev)
+ @remarks Implements the resume functionality of the module.
+ @param pdev
+ [@ref INOUT] Contains the reference of the pci_dev structure
+ @retval returnvalue
+ [@ref OUT] contains the result for the concerned attempt.
+ The result would generally comprise of success code or failure
+ code. The failure code will indicate reason for failure.
+ @see
+ pch_phub_pci_init
+ pch_phub_suspend
+ */
+static int pch_phub_resume(struct pci_dev *pdev)
+{
+
+ int ret;
+
+ pci_set_power_state(pdev, PCI_D0);
+ dev_dbg(dev_dbg, "pch_phub_resume - "
+ "pci_set_power_state Invoked successfully\n");
+
+ pci_restore_state(pdev);
+ dev_dbg(dev_dbg, "pch_phub_resume - "
+ "pci_restore_state Invoked successfully\n");
+
+ ret = pci_enable_device(pdev);
+ if (ret) {
+ dev_dbg(dev_dbg, "pch_phub_resume-pci_enable_device failed ");
+ return ret;
+ }
+
+ dev_dbg(dev_dbg, "pch_phub_resume - "
+ "pci_enable_device returns -%d\n", ret);
+
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ dev_dbg(dev_dbg, "pch_phub_resume - "
+ "pci_enable_wake Invoked successfully\n");
+
+ pch_phub_restore_reg_conf();
+ dev_dbg(dev_dbg, "pch_phub_resume - "
+ "pch_phub_restore_reg_conf Invoked successfully\n");
+
+ pch_phub_suspended = false;
+
+ dev_dbg(dev_dbg, "pch_phub_resume returns- %d\n", 0);
+ return 0;
+}
+#endif /* CONFIG_PM */
diff --git a/linux-2.6.33.1/drivers/char/pch_phub/pch_phub.h b/linux-2.6.33.1/drivers/char/pch_phub/pch_phub.h
new file mode 100644
index 0000000..009ae1e
--- /dev/null
+++ b/linux-2.6.33.1/drivers/char/pch_phub/pch_phub.h
@@ -0,0 +1,182 @@
+#ifndef __PCH_PHUB_H__
+#define __PCH_PHUB_H__
+/*!
+ * @file pch_phub.h
+ * @brief Provides all the interfaces pertaining to the Packet Hub module.
+ * @version 1.0.0.0
+ * @section
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ * History:
+ * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD.
+ *
+ * created:
+ * OKI SEMICONDUCTOR 04/14/2010
+ * modified:
+ *
+ */
+
+/*! @defgroup PHUB */
+/*! @defgroup PHUB_Global Global
+ @ingroup PHUB */
+/*! @defgroup PHUB_GlobalGeneral General
+ @ingroup PHUB_Global */
+/*! @defgroup PHUB_GlobalResultCodes StatusCodes
+ @ingroup PHUB_Global */
+/*! @defgroup PHUB_InterfaceLayer InterfaceLayer
+ @ingroup PHUB */
+/*! @defgroup PHUB_InterfaceLayerAPI Providers
+ @ingroup PHUB_InterfaceLayer
+ */
+/*! @defgroup PHUB_InterfaceLayerNotifyRoutines Notifiers
+ @ingroup PHUB_InterfaceLayer
+ */
+/*! @defgroup PHUB_PCILayer PCILayer
+ @ingroup PHUB */
+/*! @defgroup PHUB_PCILayerAPI Providers
+ @ingroup PHUB_PCILayer
+ */
+/*! @defgroup PHUB_PCILayerFacilitators Facilitators
+ @ingroup PHUB_PCILayer
+ */
+/*! @defgroup PHUB_HALLayer HALLayer
+ @ingroup PHUB */
+/*! @defgroup PHUB_HALLayerAPI Providers
+ @ingroup PHUB_HALLayer
+ */
+/*! @defgroup PHUB_HALLayerFacilitators Facilitators
+ @ingroup PHUB_HALLayer
+ */
+/*! @defgroup PHUB_Utilities Utilities
+ @ingroup PHUB */
+/*! @defgroup PHUB_UtilitiesAPI Providers
+ @ingroup PHUB_Utilities
+ */
+
+/*! @ingroup PHUB_InterfaceLayer
+ @def PHUB_IOCTL_MAGIC
+ @brief Outlines the ioctl magic.
+ */
+#define PHUB_IOCTL_MAGIC (0xf7)
+
+/*! @ingroup PHUB_InterfaceLayer
+ @def IOCTL_PHUB_READ_REG
+ @brief Outlines the read register function signature.
+ */
+#define IOCTL_PHUB_READ_REG (_IOW(PHUB_IOCTL_MAGIC, 1, unsigned long))
+
+/*! @ingroup PHUB_InterfaceLayer
+ @def IOCTL_PHUB_WRITE_REG
+ @brief Outlines the write register function signature.
+ */
+#define IOCTL_PHUB_WRITE_REG (_IOW(PHUB_IOCTL_MAGIC, 2, unsigned long))
+
+/*! @ingroup PHUB_InterfaceLayer
+ @def IOCTL_PHUB_READ_MODIFY_WRITE_REG
+ @brief Outlines the read, modify and write register function signature.
+ */
+#define IOCTL_PHUB_READ_MODIFY_WRITE_REG (_IOW(PHUB_IOCTL_MAGIC, 3,\
+ unsigned long))
+
+/*! @ingroup PHUB_InterfaceLayer
+ @def IOCTL_PHUB_READ_OROM
+ @brief Outlines the read option rom function signature.
+ */
+#define IOCTL_PHUB_READ_OROM (_IOW(PHUB_IOCTL_MAGIC, 4, unsigned long))
+
+/*! @ingroup PHUB_InterfaceLayer
+ @def IOCTL_PHUB_WRITE_OROM
+ @brief Outlines the write option rom function signature.
+ */
+#define IOCTL_PHUB_WRITE_OROM (_IOW(PHUB_IOCTL_MAGIC, 5, unsigned long))
+
+/*! @ingroup PHUB_InterfaceLayer
+ @def IOCTL_PHUB_READ_MAC_ADDR
+ @brief Outlines the read mac address function signature.
+ */
+#define IOCTL_PHUB_READ_MAC_ADDR (_IOW(PHUB_IOCTL_MAGIC, 6, unsigned long))
+
+/*! @ingroup PHUB_InterfaceLayer
+ @def IOCTL_PHUB_WRITE_MAC_ADDR
+ @brief Outlines the write mac address function signature.
+ */
+#define IOCTL_PHUB_WRITE_MAC_ADDR (_IOW(PHUB_IOCTL_MAGIC, 7, unsigned long))
+
+
+/* Registers address offset */
+#define PCH_PHUB_PHUB_ID_REG (0x0000)
+#define PCH_PHUB_QUEUE_PRI_VAL_REG (0x0004)
+#define PCH_PHUB_RC_QUEUE_MAXSIZE_REG (0x0008)
+#define PCH_PHUB_BRI_QUEUE_MAXSIZE_REG (0x000C)
+#define PCH_PHUB_COMP_RESP_TIMEOUT_REG (0x0010)
+#define PCH_PHUB_BUS_SLAVE_CONTROL_REG (0x0014)
+#define PCH_PHUB_DEADLOCK_AVOID_TYPE_REG (0x0018)
+#define PCH_PHUB_INTPIN_REG_WPERMIT_REG0 (0x0020)
+#define PCH_PHUB_INTPIN_REG_WPERMIT_REG1 (0x0024)
+#define PCH_PHUB_INTPIN_REG_WPERMIT_REG2 (0x0028)
+#define PCH_PHUB_INTPIN_REG_WPERMIT_REG3 (0x002C)
+#define PCH_PHUB_INT_REDUCE_CONTROL_REG_BASE (0x0040)
+#define CLKCFG_REG_OFFSET (0x500)
+
+/*structures*/
+/*! @ingroup PHUB_InterfaceLayer
+ @struct pch_phub_reqt
+ @brief It is a structure used for perserving information related to the
+ Packet Hub request.
+ @note
+ The concerned details should be provided during the read register,
+ write register and read / modify / write register.
+ @see
+ pch_phub_ioctl
+ */
+struct pch_phub_reqt {
+ unsigned long addr_offset; /*specifies the register address
+ offset */
+ unsigned long data; /*specifies the data */
+ unsigned long mask; /*specifies the mask */
+};
+
+/* exported function prototypes */
+/*! @ingroup PHUB_InterfaceLayerAPI
+ @fn nt pch_phub_open( struct inode *inode,struct file *file )
+ @brief Provides the functionality of initialization of the module
+ */
+int pch_phub_open(struct inode *inode, struct file *file);
+
+/*! @ingroup PHUB_InterfaceLayerAPI
+ @fn int pch_phub_release(struct inode *inode,struct file *file)
+ @brief Provides the functionality of releasing the module
+ */
+int pch_phub_release(struct inode *inode, struct file *file);
+
+/*! @ingroup PHUB_InterfaceLayerAPI
+ @fn int pch_phub_ioctl(struct inode * inode,struct file * file,
+ unsigned int cmd,
+ unsigned long arg)
+ @brief Provides the functionality of invoking various functionalities of
+ the Packet Hub.
+ */
+int pch_phub_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
+ unsigned long arg);
+
+/**global variables*/
+extern u32 pch_phub_base_address; /* base address */
+extern s32 pch_phub_suspended; /* suspend status */
+
+extern s32 pch_phub_opencount;
+extern spinlock_t pch_phub_lock;
+extern const struct file_operations pch_phub_fops;
+#endif
-- 1.6.2.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/