Re: [PATCH] mmc: make sdhci work with ricoh mmc controller

[Maxim Levitsky]

On Thu, 2010-06-03 at 10:05 -0700, Philip Langdale wrote: 
> On Thu, 3 Jun 2010 09:39:14 -0700
> Philip Langdale <philipl@xxxxxxxxx> wrote:
> 
> > > > 
> > > > Have you been able to establish if 4bit and high-speed operations
> > > > work correctly through the MMC controller? I note that you didn't
> > > > set SDHCI_CAN_DO_HISPD.
> > > Didn't test that yet, will do.
> > > I hope my MMCPlus card can do high-speed.
> > 
> > I should get a chance today to test this as well; I'll let you know
> > what I see.
> > 
> 
> Ok, I was able to try it out and setting HISPD works and 4bit seems
> to work too. My MMCplus cards run at the same speed with either
> controller.
I too confirm that.

However that suspend/resume race is tough one.
The problem seems that controller doesn't like both devices to be poked
at same time, and normally they won't, but here on resume both are
tested for a card, and this is done asynchronously by mmc core.

I will get to bottom of this sooner or later (I hope).

Best regards,
Maxim Levitsky

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/