Re: Marvell eSATA - 88SE6121 on Asus M3A79-T Deluxe - not in AHCI

From: Jeff Garzik
Date: Tue May 11 2010 - 17:09:58 EST


On 05/11/2010 02:28 PM, Phil Turmel wrote:
On 05/11/2010 01:21 PM, Phil Reynolds wrote:
Quoting "Phil Turmel"<pturmel-kernel@xxxxxxxxxx>:

I have a similar chipset in my office server: 88SE6145. If yours can run
in AHCI mode, you just need "ahci.marvell_enable=1" on your kernel
command
line, or "options ahci marvell_enable=1" in your modprobe.conf. (I have
ahci built-in, and no initramfs, so I put the option in my grub.conf.)

Neither works for me unfortunately.


Hmmm. If you post your dmesg, lspci, and config, I'll be happy to compare
to my setup. It might be something as simple as the Marvell driver loading
first and claiming the device.

The relevant part of my dmesg looks like this:

[ 4.802703] ahci 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.806351] ahci 0000:06:00.0: controller can't do NCQ, turning off CAP_NCQ
[ 4.809921] ahci 0000:06:00.0: controller can't do PMP, turning off CAP_PMP
[ 4.813334] ahci 0000:06:00.0: MV_AHCI HACK: port_map 1f -> f
[ 4.816656] ahci 0000:06:00.0: Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.
[ 4.823333] ahci: SSS flag set, parallel bus scan disabled
[ 4.826765] ahci 0000:06:00.0: AHCI 0001.0000 32 slots 5 ports 3 Gbps 0xf impl RAID mode
[ 4.830240] ahci 0000:06:00.0: flags: 64bit stag slum part
[ 4.833810] ahci 0000:06:00.0: setting latency timer to 64
[ 4.834021] scsi4 : ahci
[ 4.837755] scsi5 : ahci
[ 4.841426] scsi6 : ahci
[ 4.844997] scsi7 : ahci
[ 4.848509] scsi8 : ahci
[ 4.851956] ata5: SATA max UDMA/133 irq_stat 0x02400000, PHY RDY changed irq 17
[ 4.855423] ata6: SATA max UDMA/133 irq_stat 0x02400000, PHY RDY changed irq 17
[ 4.858814] ata7: SATA max UDMA/133 abar m1024@0xfbfffc00 port 0xfbfffe00 irq 17
[ 4.862177] ata8: SATA max UDMA/133 abar m1024@0xfbfffc00 port 0xfbfffe80 irq 17
[ 4.865472] ata9: DUMMY

The Marvell driver never gets a chance to claim my device, as it is disabled in
my kernel config. If you are using modules, you might want to blacklist "sata_mv".

sata_mv is not related to this hardware.

pata_marvell works with 6101/6121/6141/6145 PATA ports.

ahci works with 6101/6121/6141/6145 SATA ports, with marvell_enable=1.

Jeff




--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/