Re: [PATCH] amd iommu: force flush of iommu prior during shutdown

[Joerg Roedel]

On Thu, Apr 01, 2010 at 10:47:36AM -0400, Neil Horman wrote:
> On Thu, Apr 01, 2010 at 04:29:02PM +0200, Joerg Roedel wrote:
> > I am back in office next tuesday and will look into this problem too.
> > 
> Thank you.

Just took a look and I think the problem is that the devices are
attached to domains before the IOMMU hardware is enabled. This happens
in the function prealloc_protection_domains(). The attach code issues
the dte-invalidate commands but they are not executed because the
hardware is off. I will verify this when I have access to hardware
again.
The possible fix will be to enable the hardware earlier in the
initialization path.

> > Right. The default for all devices is to forbid DMA.
> > 
> Thanks, glad to know I read that right, took me a bit to understand it :)

I should probably add a comment :-)

> > Thats indeed true. I have seen that with ixgbe cards for example. They
> > seem to be really confused after an target abort.
> > 
> Yeah, this part worries me, target aborts lead to various brain dead hardware
> pieces.  What are you thoughts on leaving the iommu on through a reboot to avoid
> this issue (possibly resetting any pci device that encounters a target abort, as
> noted in the error log on the iommu?

This would only prevent possible data corruption. When the IOMMU is off
the devices will not get a target abort but will only write to different
physical memory locations. The window where a target abort can happen
starts when the kdump kernel re-enables the IOMMU and ends when the new
driver for that device attaches. This is a small window but there is not
a lot we can do to avoid this small time window.

	Joerg

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/