[PATCH] ARM: mach-sa1100: Put nanoEngine support back in the kernel.
From: Marcelo Roberto Jimenez
Date: Mon Mar 29 2010 - 15:30:18 EST
Adds Bright Star Engineering's nanoEngine board support to the kernel.
Also:
- Adds the nanoEngine memory chip to arch/arm/mach-sa1100/cpu-sa1110.c
(Micron MT48LC8M16A2TG-75).
- Increase in the sdram_params->name[] field length to accomodate the
name of the memory chip.
- Clean up of header content and order of arch/arm/mach-sa1100/cpu-sa1110.c
Signed-off-by: Marcelo Roberto Jimenez <mroberto@xxxxxxxxxxxxxxxxxxxxx>
---
arch/arm/mach-sa1100/Kconfig | 8 +++
arch/arm/mach-sa1100/Makefile | 2 +
arch/arm/mach-sa1100/cpu-sa1110.c | 27 ++++++---
arch/arm/mach-sa1100/nanoengine.c | 115 +++++++++++++++++++++++++++++++++++++
4 files changed, 142 insertions(+), 10 deletions(-)
create mode 100644 arch/arm/mach-sa1100/nanoengine.c
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index b17d52f..403db50 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -118,6 +118,14 @@ config SA1100_LART
(also known as the LART). See <http://www.lartmaker.nl/> for
information on the LART.
+config SA1100_NANOENGINE
+ bool "nanoEngine"
+ select CPU_FREQ_SA1110
+ help
+ Say Y here if you are using the Bright Star Engineering nanoEngine.
+ See <http://www.brightstareng.com/arm/nanoeng.htm> for information
+ on the BSE nanoEngine.
+
config SA1100_PLEB
bool "PLEB"
select CPU_FREQ_SA1100
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index 89349c1..8029fe2 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -37,6 +37,8 @@ obj-$(CONFIG_SA1100_JORNADA720_SSP) += jornada720_ssp.o
obj-$(CONFIG_SA1100_LART) += lart.o
led-$(CONFIG_SA1100_LART) += leds-lart.o
+obj-$(CONFIG_SA1100_NANOENGINE) += nanoengine.o
+
obj-$(CONFIG_SA1100_PLEB) += pleb.o
obj-$(CONFIG_SA1100_SHANNON) += shannon.o
diff --git a/arch/arm/mach-sa1100/cpu-sa1110.c b/arch/arm/mach-sa1100/cpu-sa1110.c
index 63b32b6..7236fcd 100644
--- a/arch/arm/mach-sa1100/cpu-sa1110.c
+++ b/arch/arm/mach-sa1100/cpu-sa1110.c
@@ -16,19 +16,17 @@
*
* The SDRAM type can be passed on the command line as cpu_sa1110.sdram=type
*/
-#include <linux/moduleparam.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
#include <linux/cpufreq.h>
#include <linux/delay.h>
#include <linux/init.h>
-#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
-#include <mach/hardware.h>
#include <asm/cputype.h>
#include <asm/mach-types.h>
-#include <asm/system.h>
+
+#include <mach/hardware.h>
#include "generic.h"
@@ -37,7 +35,7 @@
static struct cpufreq_driver sa1110_driver;
struct sdram_params {
- const char name[16];
+ const char name[20];
u_char rows; /* bits */
u_char cas_latency; /* cycles */
u_char tck; /* clock cycle time (ns) */
@@ -107,6 +105,15 @@ static struct sdram_params sdram_tbl[] __initdata = {
.twr = 8,
.refresh = 64000,
.cas_latency = 3,
+ }, { /* Micron MT48LC8M16A2TG-75 */
+ .name = "MT48LC8M16A2TG-75",
+ .rows = 12,
+ .tck = 8,
+ .trcd = 20,
+ .trp = 20,
+ .twr = 8,
+ .refresh = 64000,
+ .cas_latency = 3,
},
};
@@ -366,14 +373,14 @@ static int __init sa1110_clk_init(void)
if (!name[0]) {
if (machine_is_assabet())
name = "TC59SM716-CL3";
-
if (machine_is_pt_system3())
name = "K4S641632D";
-
if (machine_is_h3100())
name = "KM416S4030CT";
if (machine_is_jornada720())
name = "K4S281632B-1H";
+ if (machine_is_nanoengine())
+ name = "MT48LC8M16A2TG-75";
}
sdram = sa1110_find_sdram(name);
diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c
new file mode 100644
index 0000000..73a7922
--- /dev/null
+++ b/arch/arm/mach-sa1100/nanoengine.c
@@ -0,0 +1,115 @@
+/*
+ * linux/arch/arm/mach-sa1100/nanoengine.c
+ *
+ * Bright Star Engineering's nanoEngine board init code.
+ *
+ * Copyright (C) 2009 Marcelo Roberto Jimenez <mroberto@xxxxxxxxxxxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/root_dev.h>
+
+#include <asm/mach-types.h>
+#include <asm/setup.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/map.h>
+#include <asm/mach/serial_sa1100.h>
+
+#include <mach/hardware.h>
+
+#include "generic.h"
+
+/* Flash bank 0 */
+static struct mtd_partition nanoengine_partitions[] = {
+ {
+ .name = "nanoEngine boot firmware and parameter table",
+ .size = 0x00010000, /* 32K */
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "kernel/initrd reserved",
+ .size = 0x002f0000,
+ .offset = 0x00010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "experimental filesystem allocation",
+ .size = 0x00100000,
+ .offset = 0x00300000,
+ .mask_flags = MTD_WRITEABLE,
+ }
+};
+
+static struct flash_platform_data nanoengine_flash_data = {
+ .map_name = "jedec_probe",
+ .parts = nanoengine_partitions,
+ .nr_parts = ARRAY_SIZE(nanoengine_partitions),
+};
+
+static struct resource nanoengine_flash_resources[] = {
+ {
+ .start = SA1100_CS0_PHYS,
+ .end = SA1100_CS0_PHYS + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = SA1100_CS1_PHYS,
+ .end = SA1100_CS1_PHYS + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct map_desc nanoengine_io_desc[] __initdata = {
+ {
+ /* System Registers */
+ .virtual = 0xf0000000,
+ .pfn = __phys_to_pfn(0x10000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, {
+ /* Internal PCI Config Space */
+ .virtual = 0xf1000000,
+ .pfn = __phys_to_pfn(0x18A00000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }
+};
+
+static void __init nanoengine_map_io(void)
+{
+ sa1100_map_io();
+ iotable_init(nanoengine_io_desc, ARRAY_SIZE(nanoengine_io_desc));
+
+ sa1100_register_uart(0, 1);
+ sa1100_register_uart(1, 2);
+ sa1100_register_uart(2, 3);
+ Ser1SDCR0 |= SDCR0_UART;
+ /* disable IRDA -- UART2 is used as a normal serial port */
+ Ser2UTCR4 = 0;
+ Ser2HSCR0 = 0;
+}
+
+static void __init nanoengine_init(void)
+{
+ sa11x0_register_mtd(&nanoengine_flash_data, nanoengine_flash_resources,
+ ARRAY_SIZE(nanoengine_flash_resources));
+}
+
+MACHINE_START(NANOENGINE, "BSE nanoEngine")
+ .phys_io = 0x80000000,
+ .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc,
+ .boot_params = 0xc0000000,
+ .map_io = nanoengine_map_io,
+ .init_irq = sa1100_init_irq,
+ .timer = &sa1100_timer,
+ .init_machine = nanoengine_init,
+MACHINE_END
+
--
1.7.0.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/