[PATCH 7/9] drivers/scsi: Fix continuation lines

From: Joe Perches
Date: Fri Mar 26 2010 - 22:28:55 EST

Signed-off-by: Joe Perches <joe@xxxxxxxxxxx>
---
drivers/scsi/arcmsr/arcmsr_hba.c | 50 +++++++++++++++++++-------------------
drivers/scsi/qla2xxx/qla_attr.c | 18 +++++++-------
drivers/scsi/qla2xxx/qla_os.c | 6 ++--
3 files changed, 37 insertions(+), 37 deletions(-)

diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c
index 47d5d19..07a9fd6 100644
--- a/drivers/scsi/arcmsr/arcmsr_hba.c
+++ b/drivers/scsi/arcmsr/arcmsr_hba.c
@@ -585,8 +585,8 @@ static void arcmsr_flush_hba_cache(struct AdapterControlBlock *acb)
break;
else {
retry_count--;
- printk(KERN_NOTICE "arcmsr%d: wait 'flush adapter cache' \
- timeout, retry count down = %d \n", acb->host->host_no, retry_count);
+ printk(KERN_NOTICE "arcmsr%d: wait 'flush adapter cache' "
+ "timeout, retry count down = %d\n", acb->host->host_no, retry_count);
}
} while (retry_count != 0);
}
@@ -602,8 +602,8 @@ static void arcmsr_flush_hbb_cache(struct AdapterControlBlock *acb)
break;
else {
retry_count--;
- printk(KERN_NOTICE "arcmsr%d: wait 'flush adapter cache' \
- timeout,retry count down = %d \n", acb->host->host_no, retry_count);
+ printk(KERN_NOTICE "arcmsr%d: wait 'flush adapter cache' "
+ "timeout,retry count down = %d\n", acb->host->host_no, retry_count);
}
} while (retry_count != 0);
}
@@ -732,14 +732,14 @@ static void arcmsr_drain_donequeue(struct AdapterControlBlock *acb, uint32_t fla
if (abortcmd) {
abortcmd->result |= DID_ABORT << 16;
arcmsr_ccb_complete(ccb, 1);
- printk(KERN_NOTICE "arcmsr%d: ccb ='0x%p' \
- isr got aborted command \n", acb->host->host_no, ccb);
+ printk(KERN_NOTICE "arcmsr%d: ccb ='0x%p' "
+ "isr got aborted command\n", acb->host->host_no, ccb);
}
}
- printk(KERN_NOTICE "arcmsr%d: isr get an illegal ccb command \
- done acb = '0x%p'"
- "ccb = '0x%p' ccbacb = '0x%p' startdone = 0x%x"
- " ccboutstandingcount = %d \n"
+ printk(KERN_NOTICE "arcmsr%d: isr get an illegal ccb command "
+ "done acb = '0x%p' "
+ "ccb = '0x%p' ccbacb = '0x%p' startdone = 0x%x "
+ "ccboutstandingcount = %d\n"
, acb->host->host_no
, acb
, ccb
@@ -1709,8 +1709,8 @@ static void arcmsr_get_hba_config(struct AdapterControlBlock *acb)

writel(ARCMSR_INBOUND_MESG0_GET_CONFIG, &reg->inbound_msgaddr0);
if (arcmsr_hba_wait_msgint_ready(acb)) {
- printk(KERN_NOTICE "arcmsr%d: wait 'get adapter firmware \
- miscellaneous data' timeout \n", acb->host->host_no);
+ printk(KERN_NOTICE "arcmsr%d: wait 'get adapter firmware "
+ "miscellaneous data' timeout\n", acb->host->host_no);
}

count = 8;
@@ -1753,8 +1753,8 @@ static void arcmsr_get_hbb_config(struct AdapterControlBlock *acb)

writel(ARCMSR_MESSAGE_GET_CONFIG, reg->drv2iop_doorbell_reg);
if (arcmsr_hbb_wait_msgint_ready(acb)) {
- printk(KERN_NOTICE "arcmsr%d: wait 'get adapter firmware \
- miscellaneous data' timeout \n", acb->host->host_no);
+ printk(KERN_NOTICE "arcmsr%d: wait 'get adapter firmware "
+ "miscellaneous data' timeout\n", acb->host->host_no);
}

count = 8;
@@ -1889,8 +1889,8 @@ static void arcmsr_polling_hbb_ccbdone(struct AdapterControlBlock *acb,
poll_ccb_done = (ccb == poll_ccb) ? 1:0;
if ((ccb->acb != acb) || (ccb->startdone != ARCMSR_CCB_START)) {
if ((ccb->startdone == ARCMSR_CCB_ABORTED) || (ccb == poll_ccb)) {
- printk(KERN_NOTICE "arcmsr%d: \
- scsi id = %d lun = %d ccb = '0x%p' poll command abort successfully \n"
+ printk(KERN_NOTICE "arcmsr%d: "
+ "scsi id = %d lun = %d ccb = '0x%p' poll command abort successfully\n"
,acb->host->host_no
,ccb->pcmd->device->id
,ccb->pcmd->device->lun
@@ -1958,8 +1958,8 @@ static int arcmsr_iop_confirm(struct AdapterControlBlock *acb)
writel(ARCMSR_INBOUND_MESG0_SET_CONFIG, \
&reg->inbound_msgaddr0);
if (arcmsr_hba_wait_msgint_ready(acb)) {
- printk(KERN_NOTICE "arcmsr%d: ""set ccb high \
- part physical address timeout\n",
+ printk(KERN_NOTICE "arcmsr%d: set ccb high "
+ "part physical address timeout\n",
acb->host->host_no);
return 1;
}
@@ -1999,14 +1999,14 @@ static int arcmsr_iop_confirm(struct AdapterControlBlock *acb)

writel(ARCMSR_MESSAGE_SET_CONFIG, reg->drv2iop_doorbell_reg);
if (arcmsr_hbb_wait_msgint_ready(acb)) {
- printk(KERN_NOTICE "arcmsr%d: 'set command Q window' \
- timeout \n",acb->host->host_no);
+ printk(KERN_NOTICE "arcmsr%d: 'set command Q window' "
+ "timeout\n",acb->host->host_no);
return 1;
}

writel(ARCMSR_MESSAGE_START_DRIVER_MODE, reg->drv2iop_doorbell_reg);
if (arcmsr_hbb_wait_msgint_ready(acb)) {
- printk(KERN_NOTICE "arcmsr%d: 'can not set diver mode \n"\
+ printk(KERN_NOTICE "arcmsr%d: 'can not set diver mode\n"
,acb->host->host_no);
return 1;
}
@@ -2048,8 +2048,8 @@ static void arcmsr_start_hba_bgrb(struct AdapterControlBlock *acb)
acb->acb_flags |= ACB_F_MSG_START_BGRB;
writel(ARCMSR_INBOUND_MESG0_START_BGRB, &reg->inbound_msgaddr0);
if (arcmsr_hba_wait_msgint_ready(acb)) {
- printk(KERN_NOTICE "arcmsr%d: wait 'start adapter background \
- rebulid' timeout \n", acb->host->host_no);
+ printk(KERN_NOTICE "arcmsr%d: wait 'start adapter background "
+ "rebuild' timeout\n", acb->host->host_no);
}
}

@@ -2059,8 +2059,8 @@ static void arcmsr_start_hbb_bgrb(struct AdapterControlBlock *acb)
acb->acb_flags |= ACB_F_MSG_START_BGRB;
writel(ARCMSR_MESSAGE_START_BGRB, reg->drv2iop_doorbell_reg);
if (arcmsr_hbb_wait_msgint_ready(acb)) {
- printk(KERN_NOTICE "arcmsr%d: wait 'start adapter background \
- rebulid' timeout \n",acb->host->host_no);
+ printk(KERN_NOTICE "arcmsr%d: wait 'start adapter background "
+ "rebuild' timeout\n",acb->host->host_no);
}
}

diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 90d1e06..ea87ea7 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1946,9 +1946,9 @@ qla2x00_process_els(struct fc_bsg_job *bsg_job)
(rsp_sg_cnt != bsg_job->reply_payload.sg_cnt))
{
DEBUG2(printk(KERN_INFO
- "dma mapping resulted in different sg counts \
- [request_sg_cnt: %x dma_request_sg_cnt: %x\
- reply_sg_cnt: %x dma_reply_sg_cnt: %x]\n",
+ "dma mapping resulted in different sg counts "
+ "[request_sg_cnt: %x dma_request_sg_cnt: %x "
+ "reply_sg_cnt: %x dma_reply_sg_cnt: %x]\n",
bsg_job->request_payload.sg_cnt, req_sg_cnt,
bsg_job->reply_payload.sg_cnt, rsp_sg_cnt));
rval = -EAGAIN;
@@ -2040,9 +2040,9 @@ qla2x00_process_ct(struct fc_bsg_job *bsg_job)
(rsp_sg_cnt != bsg_job->reply_payload.sg_cnt))
{
DEBUG2(qla_printk(KERN_WARNING, ha,
- "dma mapping resulted in different sg counts \
- [request_sg_cnt: %x dma_request_sg_cnt: %x\
- reply_sg_cnt: %x dma_reply_sg_cnt: %x]\n",
+ "dma mapping resulted in different sg counts "
+ "[request_sg_cnt: %x dma_request_sg_cnt: %x "
+ "reply_sg_cnt: %x dma_reply_sg_cnt: %x]\n",
bsg_job->request_payload.sg_cnt, req_sg_cnt,
bsg_job->reply_payload.sg_cnt, rsp_sg_cnt));
rval = -EAGAIN;
@@ -2184,9 +2184,9 @@ qla2x00_process_vendor_specific(struct fc_bsg_job *bsg_job)
(elreq.rsp_sg_cnt != bsg_job->reply_payload.sg_cnt))
{
DEBUG2(printk(KERN_INFO
- "dma mapping resulted in different sg counts \
- [request_sg_cnt: %x dma_request_sg_cnt: %x\
- reply_sg_cnt: %x dma_reply_sg_cnt: %x]\n",
+ "dma mapping resulted in different sg counts "
+ "[request_sg_cnt: %x dma_request_sg_cnt: %x "
+ "reply_sg_cnt: %x dma_reply_sg_cnt: %x]\n",
bsg_job->request_payload.sg_cnt, elreq.req_sg_cnt,
bsg_job->reply_payload.sg_cnt, elreq.rsp_sg_cnt));
rval = -EAGAIN;
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 46720b2..eccbff3 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -87,9 +87,9 @@ MODULE_PARM_DESC(ql2xiidmaenable,
int ql2xmaxqueues = 1;
module_param(ql2xmaxqueues, int, S_IRUGO|S_IRUSR);
MODULE_PARM_DESC(ql2xmaxqueues,
- "Enables MQ settings "
- "Default is 1 for single queue. Set it to number \
- of queues in MQ mode.");
+ "Enables MQ settings "
+ "Default is 1 for single queue. "
+ "Set it to number of queues in MQ mode.");

int ql2xmultique_tag;
module_param(ql2xmultique_tag, int, S_IRUGO|S_IRUSR);
--
1.7.0.14.g7e948

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/