Re: [PATCH 4/6] drivers:misc: sources for Init manager module

[Alan Cox]

> Which puts me back to square 1, the requirement is TTY device should be open, only when either BT, FM or GPS would want to use it.
> [with your patch one of the steps of installing ldisc would be reduced upon opening].

Perhaps but its up to you how you write your low level driver and how the
ldisc indicates it wishes to be active (eg speed B0 is used to indicate
'no carrier' in many cases)

> Actually why do I even need a TTY device in this case - right ?
> ldisc driver can do the tty->ops->write and tty_read and put it up on different interfaces like eth0/hci0 or /dev/radio0 etc..

You don't need a tty if you are simply demuxing some kind of stream of
bytes to/from the hardware and you gain nothing from the tty layer and
user space interfaces such as control signal and speed setting.

That may be even cleaner in your case as you can then then provide
suitable links between your demux and the drivers attached to it
indicating when they should be on or off.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/