Re: [PATCH v2 1/6] hid: new driver for PicoLCD device
From: Dmitry Torokhov
Date: Sat Mar 20 2010 - 23:46:32 EST
On Sat, Mar 20, 2010 at 05:02:41PM +0100, Bruno Prémont wrote:
> +/* Input device
> + *
> + * The PicoLCD has an IR receiver header, a built-in keypad with 5 keys
> + * and header for 4x4 key matrix. The built-in keys are part of the matrix.
> + */
> +#define PICOLCD_KEYS 17
> +
> +static const int def_keymap[PICOLCD_KEYS] = {
def_keymap[] = {
...
};
#define PICOLCD_KEYS ARRAY_SIZE(def_keymap);
would be safe. Also unsigned short should cover it.
> + KEY_RESERVED, /* none */
> + KEY_BACK, /* col 4 + row 1 */
> + KEY_HOMEPAGE, /* col 3 + row 1 */
> + KEY_RESERVED, /* col 2 + row 1 */
> + KEY_RESERVED, /* col 1 + row 1 */
> + KEY_SCROLLUP, /* col 4 + row 2 */
> + KEY_OK, /* col 3 + row 2 */
> + KEY_SCROLLDOWN, /* col 2 + row 2 */
> + KEY_RESERVED, /* col 1 + row 2 */
> + KEY_RESERVED, /* col 4 + row 3 */
> + KEY_RESERVED, /* col 3 + row 3 */
> + KEY_RESERVED, /* col 2 + row 3 */
> + KEY_RESERVED, /* col 1 + row 3 */
> + KEY_RESERVED, /* col 4 + row 4 */
> + KEY_RESERVED, /* col 3 + row 4 */
> + KEY_RESERVED, /* col 2 + row 4 */
> + KEY_RESERVED, /* col 1 + row 4 */
> +};
> +
> +/* Description of in-progress IO operation, used for operations
> + * that trigger response from device */
> +struct picolcd_pending {
> + struct hid_report *out_report;
> + struct hid_report *in_report;
> + int raw_size;
> + u8 raw_data[64];
> +};
> +
> +/* Per device data structure */
> +struct picolcd_data {
> + struct hid_device *hdev;
> +#ifdef CONFIG_DEBUG_FS
> + int addr_sz;
> +#endif
> + u8 version[2];
> + /* input stuff */
> + u8 pressed_keys[2];
> + struct input_dev *input_keys;
> + struct input_dev *input_cir;
> + int keycode[PICOLCD_KEYS];
> +
> + /* Housekeeping stuff */
> + spinlock_t lock;
> + struct picolcd_pending *pending;
> + struct completion ready;
> + int status;
> +#define PICOLCD_BUSY 1
> +#define PICOLCD_FAILED 4
> +#define PICOLCD_BOOTLOADER 8
> +};
> +
> +
> +/* Find a given report */
> +#define picolcd_in_report(id, dev) picolcd_report(id, dev, HID_INPUT_REPORT)
> +#define picolcd_out_report(id, dev) picolcd_report(id, dev, HID_OUTPUT_REPORT)
> +
> +static struct hid_report *picolcd_report(int id, struct hid_device *hdev, int dir)
> +{
> + struct list_head *feature_report_list = &hdev->report_enum[dir].report_list;
> + struct hid_report *report = NULL;
> +
> + list_for_each_entry(report, feature_report_list, list) {
> + if (report->id == id)
> + return report;
> + }
> + dev_warn(&hdev->dev, "No report with id 0x%x found\n", id);
> + return NULL;
> +}
> +
> +#ifdef CONFIG_DEBUG_FS
> +static void picolcd_debug_out_report(struct picolcd_data *data,
> + struct hid_device *hdev, struct hid_report *report);
> +#define usbhid_submit_report(a, b, c) \
> + picolcd_debug_out_report(hid_get_drvdata(a), a, b); \
> + usbhid_submit_report(a, b, c)
> +#endif
> +
> +/* Submit a report and wait for a reply from device - if device fades away
> + * or does not respond in time, return NULL */
> +static struct picolcd_pending* picolcd_send_and_wait(struct hid_device *hdev,
> + int report_id, const u8 *raw_data, int size)
> +{
> + struct picolcd_data *data = hid_get_drvdata(hdev);
> + struct picolcd_pending *work;
> + struct hid_report *report = picolcd_out_report(report_id, hdev);
> + unsigned long flags;
> + int status, i, j, k;
> +
> + if (!report)
> + return NULL;
> + work = kzalloc(sizeof(*work), GFP_KERNEL);
> + if (!work)
> + return NULL;
> +
> + work->out_report = report;
> + work->in_report = NULL;
> + work->raw_size = 0;
> +
> +retry:
> + /* try to get lock and enqueue our job */
> + spin_lock_irqsave(&data->lock, flags);
> + status = data->status;
> + if (data->pending || (status & PICOLCD_FAILED)) {
> + /* some job already pending,
> + * wait for it to complete and try again */
> + spin_unlock_irqrestore(&data->lock, flags);
> + if (status & PICOLCD_FAILED) {
> + kfree(work);
> + return NULL;
> + }
> + wait_for_completion_interruptible_timeout(&data->ready, HZ*2);
> + goto retry;
Umm, can we do this with a mutex? Like you take a mutex and don't
release till you are done talking to the device. So that other guy will
wait on the mutex instead of waking up and rechecking condition.
> + }
> + data->status |= PICOLCD_BUSY;
> + data->pending = work;
> + for (i = k = 0; i < report->maxfield; i++)
> + for (j = 0; j < report->field[i]->report_count; j++) {
> + hid_set_field(report->field[i], j, k < size ? raw_data[k] : 0);
> + k++;
> + }
> + usbhid_submit_report(data->hdev, report, USB_DIR_OUT);
> + complete_all(&data->ready);
> + INIT_COMPLETION(data->ready);
Umm, what does this do, exactly?
> + spin_unlock_irqrestore(&data->lock, flags);
> + /* wait for our job to complete */
> + wait_for_completion_interruptible_timeout(&data->ready, HZ*2);
> +
> + spin_lock_irqsave(&data->lock, flags);
> + if (data->pending == work) {
> + data->status &= ~PICOLCD_BUSY;
> + data->pending = NULL;
> + complete_all(&data->ready);
> + spin_unlock_irqrestore(&data->lock, flags);
> + return work;
> + } else {
> + spin_unlock_irqrestore(&data->lock, flags);
> + kfree(work);
> + return NULL;
> + }
> +}
> +
> +/*
> + * input class device
> + */
> +static int picolcd_raw_keypad(struct hid_device *hdev,
> + struct hid_report *report, u8 *raw_data, int size)
> +{
> + /*
> + * Keypad event
> + * First and second data bytes list currently pressed keys,
> + * 0x00 means no key and at most 2 keys may be pressed at same time
> + */
> + struct picolcd_data *data = hid_get_drvdata(hdev);
> + int i, j;
> +
> + /* determine newly pressed keys */
> + for (i = 0; i < size; i++) {
> + int key_code;
> + if (raw_data[i] == 0)
> + continue;
> + for (j = 0; j < sizeof(data->pressed_keys); j++)
> + if (data->pressed_keys[j] == raw_data[i])
> + goto key_already_down;
> + for (j = 0; j < sizeof(data->pressed_keys); j++)
> + if (data->pressed_keys[j] == 0) {
> + data->pressed_keys[j] = raw_data[i];
> + break;
> + }
> + input_event(data->input_keys, EV_MSC, MSC_SCAN, raw_data[i]);
> + if (input_get_keycode(data->input_keys, raw_data[i], &key_code))
> + key_code = KEY_UNKNOWN;
Just get keycode directly from the driver's table, no need to jump through hoops
here,
> + if (key_code != KEY_UNKNOWN) {
> + dbg_hid(PICOLCD_NAME " got key press for %u:%d", raw_data[i], key_code);
> + input_report_key(data->input_keys, key_code, 1);
> + }
> + input_sync(data->input_keys);
> +key_already_down:
> + continue;
> + }
> +
> + /* determine newly released keys */
> + for (j = 0; j < sizeof(data->pressed_keys); j++) {
> + int key_code;
> + if (data->pressed_keys[j] == 0)
> + continue;
> + for (i = 0; i < size; i++)
> + if (data->pressed_keys[j] == raw_data[i])
> + goto key_still_down;
> + input_event(data->input_keys, EV_MSC, MSC_SCAN, data->pressed_keys[j]);
> + if (input_get_keycode(data->input_keys, data->pressed_keys[j], &key_code))
> + key_code = KEY_UNKNOWN;
> + if (key_code != KEY_UNKNOWN) {
> + dbg_hid(PICOLCD_NAME " got key release for %u:%d", data->pressed_keys[j], key_code);
> + input_report_key(data->input_keys, key_code, 0);
> + }
> + input_sync(data->input_keys);
> + data->pressed_keys[j] = 0;
> +key_still_down:
> + continue;
> + }
> + return 1;
> +}
> +
> +static int picolcd_raw_cir(struct hid_device *hdev,
> + struct hid_report *report, u8 *raw_data, int size)
> +{
> + /* Need understanding of CIR data format to implement ... */
> + return 1;
> +}
> +
> +
> +
> +/*
> + * Reset our device and wait for answer to VERSION request
> + */
> +static int picolcd_reset(struct hid_device *hdev)
> +{
> + struct picolcd_data *data = hid_get_drvdata(hdev);
> + struct hid_report *report = picolcd_out_report(REPORT_RESET, hdev);
> + struct picolcd_pending *verinfo;
> + unsigned long flags;
> +
> + if (!data || !report || report->maxfield != 1)
> + return -ENODEV;
> +
> + spin_lock_irqsave(&data->lock, flags);
> + complete_all(&data->ready);
> + INIT_COMPLETION(data->ready);
> + if (hdev->product == USB_DEVICE_ID_PICOLCD_BOOTLOADER)
> + data->status |= PICOLCD_BOOTLOADER;
> +
> + /* perform the reset */
> + hid_set_field(report->field[0], 0, 1);
> + usbhid_submit_report(hdev, report, USB_DIR_OUT);
> + spin_unlock_irqrestore(&data->lock, flags);
> +
> + verinfo = picolcd_send_and_wait(hdev, REPORT_VERSION, NULL, 0);
> + if (verinfo && verinfo->raw_size == 2) {
> + if (data->status & PICOLCD_BOOTLOADER) {
> + dev_info(&hdev->dev, "PicoLCD reset successful, bootloader version %d.%d\n",
> + verinfo->raw_data[0], verinfo->raw_data[1]);
> + data->version[0] = verinfo->raw_data[0];
> + data->version[1] = verinfo->raw_data[1];
> + } else {
> + dev_info(&hdev->dev, "PicoLCD reset successful, firmware version %d.%d\n",
> + verinfo->raw_data[1], verinfo->raw_data[0]);
> + data->version[0] = verinfo->raw_data[1];
> + data->version[1] = verinfo->raw_data[0];
> + }
> + kfree(verinfo);
> + verinfo = NULL;
> + } else if (verinfo) {
> + dev_err(&hdev->dev, "confused, got unexpected version response from PicoLCD after reset\n");
> + kfree(verinfo);
> + verinfo = NULL;
> + } else {
> + dev_err(&hdev->dev, "no version response from PicoLCD after reset");
> + return -EBUSY;
> + }
> +
I am pretty sure it could be written clearer instead of checking for
verinfo several times...
if (!verinfo) {
dev_err(..);
return -EBUSY;
}
if (verinfo->raw_size == 2) {
...
} else {
dev_err(...)
}
kfree(verinfo);
> + return 0;
> +}
> +
> +/*
> + * The "operation_mode" sysfs attribute
> + */
> +static ssize_t picolcd_operation_mode_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct picolcd_data *data = dev_get_drvdata(dev);
> +
> + if (data->status & PICOLCD_BOOTLOADER)
> + return snprintf(buf, PAGE_SIZE, "<bootloader> lcd\n");
> + else
> + return snprintf(buf, PAGE_SIZE, "bootloader <lcd>\n");
> +}
> +
> +static ssize_t picolcd_operation_mode_store(struct device *dev,
> + struct device_attribute *attr, const char *buf, size_t count)
> +{
> + struct picolcd_data *data = dev_get_drvdata(dev);
> + struct hid_report *report = NULL;
> + size_t cnt = count;
> + int timeout = 5000;
> + unsigned u;
> + unsigned long flags;
> +
> + if (cnt >= 3 && strncmp("lcd", buf, 3) == 0) {
> + if (data->status & PICOLCD_BOOTLOADER)
> + report = picolcd_out_report(REPORT_EXIT_FLASHER, data->hdev);
> + buf += 3;
> + cnt -= 3;
> + } else if (cnt >= 10 && strncmp("bootloader", buf, 10) == 0) {
> + if (!(data->status & PICOLCD_BOOTLOADER))
> + report = picolcd_out_report(REPORT_EXIT_KEYBOARD, data->hdev);
> + buf += 10;
> + cnt -= 10;
> + }
> + if (!report)
> + return -EINVAL;
> +
> + while (cnt > 0 && (*buf == ' ' || *buf == '\t')) {
> + buf++;
> + cnt--;
> + }
> + while (cnt > 0 && (buf[cnt-1] == '\n' || buf[cnt-1] == '\r'))
> + cnt--;
> + if (cnt > 0) {
> + if (sscanf(buf, "%u", &u) != 1)
> + return -EINVAL;
> + if (u > 30000)
> + return -EINVAL;
> + else
> + timeout = u;
> + }
> +
> + spin_lock_irqsave(&data->lock, flags);
> + hid_set_field(report->field[0], 0, timeout & 0xff);
> + hid_set_field(report->field[0], 1, (timeout >> 8) & 0xff);
> + usbhid_submit_report(data->hdev, report, USB_DIR_OUT);
> + spin_unlock_irqrestore(&data->lock, flags);
> + return count;
> +}
> +
> +static DEVICE_ATTR(operation_mode, 0644, picolcd_operation_mode_show,
> + picolcd_operation_mode_store);
> +
> +
> +#ifdef CONFIG_DEBUG_FS
> +/*
> + * Helper code for HID report level dumping/debugging
> + */
> +static const char *error_codes[] = {
> + "success", "parameter missing", "data_missing", "block readonly", "block not erasable",
> + "block too big", "section overflow", "invalid command length", "invalid data length",
> +};
> +
> +static void dump_buff_as_hex(char *dst, size_t dst_sz, const u8 *data,
> + const size_t data_len)
> +{
> + int i, j;
> + for (i = j = 0; i < data_len && j + 3 < dst_sz; i++) {
> + dst[j++] = hex_asc[(data[i] >> 4) & 0x0f];
> + dst[j++] = hex_asc[data[i] & 0x0f];
> + dst[j++] = ' ';
> + }
> + if (j < dst_sz) {
> + dst[j--] = '\0';
> + dst[j] = '\n';
> + } else
> + dst[j] = '\0';
> +}
> +
> +static void picolcd_debug_out_report(struct picolcd_data *data,
> + struct hid_device *hdev, struct hid_report *report)
> +{
> + u8 raw_data[70];
> + int raw_size = (report->size >> 3) + 1;
> + char *buff;
> +#define BUFF_SZ 256
> +
> + /* Avoid unnecessary overhead if debugfs is disabled */
> + if (!hdev->debug_events)
> + return;
> +
> + buff = kmalloc(BUFF_SZ, GFP_ATOMIC);
> + if (!buff)
> + return;
> +
> + snprintf(buff, BUFF_SZ, "\nout report %d (size %d) = ",
> + report->id, raw_size);
> + hid_debug_event(hdev, buff);
> + if (raw_size + 5 > sizeof(raw_data)) {
> + hid_debug_event(hdev, " TOO BIG\n");
> + return;
> + } else {
> + raw_data[0] = report->id;
> + hid_output_report(report, raw_data);
> + dump_buff_as_hex(buff, BUFF_SZ, raw_data, raw_size);
> + hid_debug_event(hdev, buff);
> + }
> +
> + switch (report->id) {
> + case REPORT_LED_STATE:
> + /* 1 data byte with GPO state */
> + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
> + "REPORT_LED_STATE", report->id, raw_size-1);
> + hid_debug_event(hdev, buff);
> + snprintf(buff, BUFF_SZ, "\tGPO state: 0x%02x\n", raw_data[1]);
> + hid_debug_event(hdev, buff);
> + break;
> + case REPORT_BRIGHTNESS:
> + /* 1 data byte with brightness */
> + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
> + "REPORT_BRIGHTNESS", report->id, raw_size-1);
> + hid_debug_event(hdev, buff);
> + snprintf(buff, BUFF_SZ, "\tBrightness: 0x%02x\n", raw_data[1]);
> + hid_debug_event(hdev, buff);
> + break;
> + case REPORT_CONTRAST:
> + /* 1 data byte with contrast */
> + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
> + "REPORT_CONTRAST", report->id, raw_size-1);
> + hid_debug_event(hdev, buff);
> + snprintf(buff, BUFF_SZ, "\tContrast: 0x%02x\n", raw_data[1]);
> + hid_debug_event(hdev, buff);
> + break;
> + case REPORT_RESET:
> + /* 2 data bytes with reset duration in ms */
> + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
> + "REPORT_RESET", report->id, raw_size-1);
> + hid_debug_event(hdev, buff);
> + snprintf(buff, BUFF_SZ, "\tDuration: 0x%02x%02x (%dms)\n",
> + raw_data[2], raw_data[1], raw_data[2] << 8 | raw_data[1]);
> + hid_debug_event(hdev, buff);
> + break;
> + case REPORT_LCD_CMD:
> + /* 63 data bytes with LCD commands */
> + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
> + "REPORT_LCD_CMD", report->id, raw_size-1);
> + hid_debug_event(hdev, buff);
> + /* TODO: format decoding */
> + break;
> + case REPORT_LCD_DATA:
> + /* 63 data bytes with LCD data */
> + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
> + "REPORT_LCD_CMD", report->id, raw_size-1);
> + /* TODO: format decoding */
> + hid_debug_event(hdev, buff);
> + break;
> + case REPORT_LCD_CMD_DATA:
> + /* 63 data bytes with LCD commands and data */
> + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
> + "REPORT_LCD_CMD", report->id, raw_size-1);
> + /* TODO: format decoding */
> + hid_debug_event(hdev, buff);
> + break;
> + case REPORT_EE_READ:
> + /* 3 data bytes with read area description */
> + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
> + "REPORT_EE_READ", report->id, raw_size-1);
> + hid_debug_event(hdev, buff);
> + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", raw_data[2], raw_data[1]);
> + hid_debug_event(hdev, buff);
> + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]);
> + hid_debug_event(hdev, buff);
> + break;
> + case REPORT_EE_WRITE:
> + /* 3+1..20 data bytes with write area description */
> + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
> + "REPORT_EE_WRITE", report->id, raw_size-1);
> + hid_debug_event(hdev, buff);
> + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", raw_data[2], raw_data[1]);
> + hid_debug_event(hdev, buff);
> + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]);
> + hid_debug_event(hdev, buff);
> + if (raw_data[3] == 0) {
> + snprintf(buff, BUFF_SZ, "\tNo data\n");
> + } else if (raw_data[3] + 4 <= raw_size) {
> + snprintf(buff, BUFF_SZ, "\tData: ");
> + hid_debug_event(hdev, buff);
> + dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]);
> + } else {
> + snprintf(buff, BUFF_SZ, "\tData overflowed\n");
> + }
> + hid_debug_event(hdev, buff);
> + break;
> + case REPORT_ERASE_MEMORY:
> + case REPORT_BL_ERASE_MEMORY:
> + /* 3 data bytes with pointer inside erase block */
> + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
> + "REPORT_ERASE_MEMORY", report->id, raw_size-1);
> + hid_debug_event(hdev, buff);
> + switch (data->addr_sz) {
> + case 2:
> + snprintf(buff, BUFF_SZ, "\tAddress inside 64 byte block: 0x%02x%02x\n",
> + raw_data[2], raw_data[1]);
> + break;
> + case 3:
> + snprintf(buff, BUFF_SZ, "\tAddress inside 64 byte block: 0x%02x%02x%02x\n",
> + raw_data[3], raw_data[2], raw_data[1]);
> + break;
> + default:
> + snprintf(buff, BUFF_SZ, "\tNot supported\n");
> + }
> + hid_debug_event(hdev, buff);
> + break;
> + case REPORT_READ_MEMORY:
> + case REPORT_BL_READ_MEMORY:
> + /* 4 data bytes with read area description */
> + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
> + "REPORT_READ_MEMORY", report->id, raw_size-1);
> + hid_debug_event(hdev, buff);
> + switch (data->addr_sz) {
> + case 2:
> + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n",
> + raw_data[2], raw_data[1]);
> + hid_debug_event(hdev, buff);
> + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]);
> + break;
> + case 3:
> + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x%02x\n",
> + raw_data[3], raw_data[2], raw_data[1]);
> + hid_debug_event(hdev, buff);
> + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[4]);
> + break;
> + default:
> + snprintf(buff, BUFF_SZ, "\tNot supported\n");
> + }
> + hid_debug_event(hdev, buff);
> + break;
> + case REPORT_WRITE_MEMORY:
> + case REPORT_BL_WRITE_MEMORY:
> + /* 4+1..32 data bytes with write adrea description */
> + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
> + "REPORT_WRITE_MEMORY", report->id, raw_size-1);
> + hid_debug_event(hdev, buff);
> + switch (data->addr_sz) {
> + case 2:
> + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n",
> + raw_data[2], raw_data[1]);
> + hid_debug_event(hdev, buff);
> + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]);
> + hid_debug_event(hdev, buff);
> + if (raw_data[3] == 0) {
> + snprintf(buff, BUFF_SZ, "\tNo data\n");
> + } else if (raw_data[3] + 4 <= raw_size) {
> + snprintf(buff, BUFF_SZ, "\tData: ");
> + hid_debug_event(hdev, buff);
> + dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]);
> + } else {
> + snprintf(buff, BUFF_SZ, "\tData overflowed\n");
> + }
> + break;
> + case 3:
> + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x%02x\n",
> + raw_data[3], raw_data[2], raw_data[1]);
> + hid_debug_event(hdev, buff);
> + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[4]);
> + hid_debug_event(hdev, buff);
> + if (raw_data[4] == 0) {
> + snprintf(buff, BUFF_SZ, "\tNo data\n");
> + } else if (raw_data[4] + 5 <= raw_size) {
> + snprintf(buff, BUFF_SZ, "\tData: ");
> + hid_debug_event(hdev, buff);
> + dump_buff_as_hex(buff, BUFF_SZ, raw_data+5, raw_data[4]);
> + } else {
> + snprintf(buff, BUFF_SZ, "\tData overflowed\n");
> + }
> + break;
> + default:
> + snprintf(buff, BUFF_SZ, "\tNot supported\n");
> + }
> + hid_debug_event(hdev, buff);
> + break;
> + case REPORT_SPLASH_RESTART:
> + /* TODO */
> + break;
> + case REPORT_EXIT_KEYBOARD:
> + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
> + "REPORT_EXIT_KEYBOARD", report->id, raw_size-1);
> + hid_debug_event(hdev, buff);
> + snprintf(buff, BUFF_SZ, "\tRestart delay: %dms (0x%02x%02x)\n",
> + raw_data[1] | (raw_data[2] << 8),
> + raw_data[2], raw_data[1]);
> + hid_debug_event(hdev, buff);
> + break;
> + case REPORT_VERSION:
> + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
> + "REPORT_VERSION", report->id, raw_size-1);
> + hid_debug_event(hdev, buff);
> + break;
> + case REPORT_DEVID:
> + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
> + "REPORT_DEVID", report->id, raw_size-1);
> + hid_debug_event(hdev, buff);
> + break;
> + case REPORT_SPLASH_SIZE:
> + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
> + "REPORT_SPLASH_SIZE", report->id, raw_size-1);
> + hid_debug_event(hdev, buff);
> + break;
> + case REPORT_HOOK_VERSION:
> + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
> + "REPORT_HOOK_VERSION", report->id, raw_size-1);
> + hid_debug_event(hdev, buff);
> + break;
> + case REPORT_EXIT_FLASHER:
> + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
> + "REPORT_VERSION", report->id, raw_size-1);
> + hid_debug_event(hdev, buff);
> + snprintf(buff, BUFF_SZ, "\tRestart delay: %dms (0x%02x%02x)\n",
> + raw_data[1] | (raw_data[2] << 8),
> + raw_data[2], raw_data[1]);
> + hid_debug_event(hdev, buff);
> + break;
> + default:
> + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
> + "<unknown>", report->id, raw_size-1);
> + hid_debug_event(hdev, buff);
> + break;
> + }
> + wake_up_interruptible(&hdev->debug_wait);
> + kfree(buff);
> +}
> +
> +static inline void picolcd_debug_raw_event(struct picolcd_data *data,
> + struct hid_device *hdev, struct hid_report *report,
> + u8 *raw_data, int size)
> +{
> + char *buff;
> +
> +#define BUFF_SZ 256
> + /* Avoid unnecessary overhead if debugfs is disabled */
> + if (!hdev->debug_events)
> + return;
> +
> + buff = kmalloc(BUFF_SZ, GFP_ATOMIC);
> + if (!buff)
> + return;
> +
> + switch (report->id) {
> + case REPORT_ERROR_CODE:
> + /* 2 data bytes with affected report and error code */
> + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
> + "REPORT_ERROR_CODE", report->id, size-1);
> + hid_debug_event(hdev, buff);
> + if (raw_data[2] < ARRAY_SIZE(error_codes))
> + snprintf(buff, BUFF_SZ, "\tError code 0x%02x (%s) in reply to report 0x%02x\n",
> + raw_data[2], error_codes[raw_data[2]], raw_data[1]);
> + else
> + snprintf(buff, BUFF_SZ, "\tError code 0x%02x in reply to report 0x%02x\n",
> + raw_data[2], raw_data[1]);
> + hid_debug_event(hdev, buff);
> + break;
> + case REPORT_KEY_STATE:
> + /* 2 data bytes with key state */
> + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
> + "REPORT_KEY_STATE", report->id, size-1);
> + hid_debug_event(hdev, buff);
> + if (raw_data[1] == 0)
> + snprintf(buff, BUFF_SZ, "\tNo key pressed\n");
> + else if (raw_data[2] == 0)
> + snprintf(buff, BUFF_SZ, "\tOne key pressed: 0x%02x (%d)\n",
> + raw_data[1], raw_data[1]);
> + else
> + snprintf(buff, BUFF_SZ, "\tTwo keys pressed: 0x%02x (%d), 0x%02x (%d)\n",
> + raw_data[1], raw_data[1], raw_data[2], raw_data[2]);
> + hid_debug_event(hdev, buff);
> + break;
> + case REPORT_IR_DATA:
> + /* Up to 20 byes of IR scancode data */
> + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
> + "REPORT_IR_DATA", report->id, size-1);
> + hid_debug_event(hdev, buff);
> + if (raw_data[1] == 0) {
> + snprintf(buff, BUFF_SZ, "\tUnexpectedly 0 data length\n");
> + hid_debug_event(hdev, buff);
> + } else if (raw_data[1] + 1 <= size) {
> + snprintf(buff, BUFF_SZ, "\tData length: %d\n\tIR Data: ",
> + raw_data[1]-1);
> + hid_debug_event(hdev, buff);
> + dump_buff_as_hex(buff, BUFF_SZ, raw_data+2, raw_data[1]-1);
> + hid_debug_event(hdev, buff);
> + } else {
> + snprintf(buff, BUFF_SZ, "\tOverflowing data length: %d\n",
> + raw_data[1]-1);
> + hid_debug_event(hdev, buff);
> + }
> + break;
> + case REPORT_EE_DATA:
> + /* Data buffer in response to REPORT_EE_READ or REPORT_EE_WRITE */
> + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
> + "REPORT_EE_DATA", report->id, size-1);
> + hid_debug_event(hdev, buff);
> + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", raw_data[2], raw_data[1]);
> + hid_debug_event(hdev, buff);
> + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]);
> + hid_debug_event(hdev, buff);
> + if (raw_data[3] == 0) {
> + snprintf(buff, BUFF_SZ, "\tNo data\n");
> + hid_debug_event(hdev, buff);
> + } else if (raw_data[3] + 4 <= size) {
> + snprintf(buff, BUFF_SZ, "\tData: ");
> + hid_debug_event(hdev, buff);
> + dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]);
> + hid_debug_event(hdev, buff);
> + } else {
> + snprintf(buff, BUFF_SZ, "\tData overflowed\n");
> + hid_debug_event(hdev, buff);
> + }
> + break;
> + case REPORT_MEMORY:
> + /* Data buffer in response to REPORT_READ_MEMORY or REPORT_WRTIE_MEMORY */
> + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
> + "REPORT_MEMORY", report->id, size-1);
> + hid_debug_event(hdev, buff);
> + switch (data->addr_sz) {
> + case 2:
> + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n",
> + raw_data[2], raw_data[1]);
> + hid_debug_event(hdev, buff);
> + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]);
> + hid_debug_event(hdev, buff);
> + if (raw_data[3] == 0) {
> + snprintf(buff, BUFF_SZ, "\tNo data\n");
> + } else if (raw_data[3] + 4 <= size) {
> + snprintf(buff, BUFF_SZ, "\tData: ");
> + hid_debug_event(hdev, buff);
> + dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]);
> + } else {
> + snprintf(buff, BUFF_SZ, "\tData overflowed\n");
> + }
> + break;
> + case 3:
> + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x%02x\n",
> + raw_data[3], raw_data[2], raw_data[1]);
> + hid_debug_event(hdev, buff);
> + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[4]);
> + hid_debug_event(hdev, buff);
> + if (raw_data[4] == 0) {
> + snprintf(buff, BUFF_SZ, "\tNo data\n");
> + } else if (raw_data[4] + 5 <= size) {
> + snprintf(buff, BUFF_SZ, "\tData: ");
> + hid_debug_event(hdev, buff);
> + dump_buff_as_hex(buff, BUFF_SZ, raw_data+5, raw_data[4]);
> + } else {
> + snprintf(buff, BUFF_SZ, "\tData overflowed\n");
> + }
> + break;
> + default:
> + snprintf(buff, BUFF_SZ, "\tNot supported\n");
> + }
> + hid_debug_event(hdev, buff);
> + break;
> + case REPORT_VERSION:
> + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
> + "REPORT_VERSION", report->id, size-1);
> + hid_debug_event(hdev, buff);
> + snprintf(buff, BUFF_SZ, "\tFirmware version: %d.%d\n",
> + raw_data[2], raw_data[1]);
> + hid_debug_event(hdev, buff);
> + break;
> + case REPORT_BL_ERASE_MEMORY:
> + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
> + "REPORT_BL_ERASE_MEMORY", report->id, size-1);
> + hid_debug_event(hdev, buff);
> + /* TODO */
> + break;
> + case REPORT_BL_READ_MEMORY:
> + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
> + "REPORT_BL_READ_MEMORY", report->id, size-1);
> + hid_debug_event(hdev, buff);
> + /* TODO */
> + break;
> + case REPORT_BL_WRITE_MEMORY:
> + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
> + "REPORT_BL_WRITE_MEMORY", report->id, size-1);
> + hid_debug_event(hdev, buff);
> + /* TODO */
> + break;
> + case REPORT_DEVID:
> + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
> + "REPORT_DEVID", report->id, size-1);
> + hid_debug_event(hdev, buff);
> + snprintf(buff, BUFF_SZ, "\tSerial: 0x%02x%02x%02x%02x\n",
> + raw_data[1], raw_data[2], raw_data[3], raw_data[4]);
> + hid_debug_event(hdev, buff);
> + snprintf(buff, BUFF_SZ, "\tType: 0x%02x\n",
> + raw_data[5]);
> + hid_debug_event(hdev, buff);
> + break;
> + case REPORT_SPLASH_SIZE:
> + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
> + "REPORT_SPLASH_SIZE", report->id, size-1);
> + hid_debug_event(hdev, buff);
> + snprintf(buff, BUFF_SZ, "\tTotal splash space: %d\n",
> + (raw_data[2] << 8) | raw_data[1]);
> + hid_debug_event(hdev, buff);
> + snprintf(buff, BUFF_SZ, "\tUsed splash space: %d\n",
> + (raw_data[4] << 8) | raw_data[3]);
> + hid_debug_event(hdev, buff);
> + break;
> + case REPORT_HOOK_VERSION:
> + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
> + "REPORT_HOOK_VERSION", report->id, size-1);
> + hid_debug_event(hdev, buff);
> + snprintf(buff, BUFF_SZ, "\tFirmware version: %d.%d\n",
> + raw_data[1], raw_data[2]);
> + hid_debug_event(hdev, buff);
> + break;
> + default:
> + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
> + "<unknown>", report->id, size-1);
> + hid_debug_event(hdev, buff);
> + break;
> + }
> + wake_up_interruptible(&hdev->debug_wait);
> + kfree(buff);
> +}
> +#else
> +#define picolcd_debug_raw_event(data, hdev, report, raw_data, size)
> +#endif
> +
> +/*
> + * Handle raw report as sent by device
> + */
> +static int picolcd_raw_event(struct hid_device *hdev,
> + struct hid_report *report, u8 *raw_data, int size)
> +{
> + struct picolcd_data *data = hid_get_drvdata(hdev);
> + unsigned long flags;
> + int ret = 0;
> +
> + if (data == NULL)
> + return 1;
> +
> + if (report->id == REPORT_KEY_STATE) {
> + if (data->input_keys)
> + ret = picolcd_raw_keypad(hdev, report, raw_data+1, size-1);
> + } else if (report->id == REPORT_IR_DATA) {
> + if (data->input_cir)
> + ret = picolcd_raw_cir(hdev, report, raw_data+1, size-1);
> + } else {
> + spin_lock_irqsave(&data->lock, flags);
> + /*
> + * We let the caller of picolcd_send_and_wait() check if the report
> + * we got is one of the expected ones or not.
> + */
> + if (data->pending) {
> + memcpy(data->pending->raw_data, raw_data+1, size-1);
> + data->pending->raw_size = size-1;
> + data->pending->in_report = report;
> + complete_all(&data->ready);
> + }
> + spin_unlock_irqrestore(&data->lock, flags);
> + }
> +
> + picolcd_debug_raw_event(data, hdev, report, raw_data, size);
> + return 1;
> +}
> +
> +#ifdef CONFIG_PM
> +static int picolcd_suspend(struct hid_device *hdev)
> +{
> + dbg_hid(PICOLCD_NAME " device ready for suspend\n");
> + return 0;
> +}
> +
> +static int picolcd_resume(struct hid_device *hdev)
> +{
> + return 0;
> +}
> +
> +static int picolcd_reset_resume(struct hid_device *hdev)
> +{
> + int ret;
> + ret = picolcd_reset(hdev);
> + if (ret)
> + dbg_hid(PICOLCD_NAME " resetting our device failed: %d\n", ret);
> + return 0;
> +}
> +#endif
> +
> +/* initialize keypad input device */
> +static inline int picolcd_init_keys(struct picolcd_data *data,
> + struct hid_report *report)
> +{
> + struct hid_device *hdev = data->hdev;
> + struct input_dev *idev;
> + int error, i;
> +
> + if (!report)
> + return -ENODEV;
> + if (report->maxfield != 1 || report->field[0]->report_count != 2 ||
> + report->field[0]->report_size != 8) {
> + dev_err(&hdev->dev, "unsupported KEY_STATE report");
> + return -EINVAL;
> + }
> +
> + idev = input_allocate_device();
> + if (idev == NULL) {
> + dev_err(&hdev->dev, "failed to allocate input device");
> + return -ENOMEM;
> + }
> + input_set_drvdata(idev, hdev);
> + memcpy(data->keycode, def_keymap, sizeof(def_keymap));
> + idev->name = hdev->name;
> + idev->phys = hdev->phys;
> + idev->uniq = hdev->uniq;
> + idev->id.bustype = hdev->bus;
> + idev->id.vendor = hdev->vendor;
> + idev->id.product = hdev->product;
> + idev->id.version = hdev->version;
> + idev->dev.parent = hdev->dev.parent;
> + idev->keycode = &data->keycode;
> + idev->keycodemax = PICOLCD_KEYS;
> + idev->keycodesize = sizeof(int);
> + input_set_capability(idev, EV_MSC, MSC_SCAN);
> + set_bit(EV_REP, idev->evbit);
> + for (i = 0; i < PICOLCD_KEYS; i++) {
> + int key = ((int *)idev->keycode)[i];
> + if (key < KEY_MAX && key >= 0)
> + input_set_capability(idev, EV_KEY, key);
> + }
> + error = input_register_device(idev);
> + if (error) {
> + dev_err(&hdev->dev, "error registering the input device");
> + input_free_device(idev);
> + return error;
> + }
> + data->input_keys = idev;
> + return 0;
> +}
> +
> +static void picolcd_exit_keys(struct picolcd_data *data)
> +{
> + struct input_dev *idev = data->input_keys;
> +
> + data->input_keys = NULL;
> + if (idev)
> + input_unregister_device(idev);
> +}
> +
> +/* initialize CIR input device */
> +static inline int picolcd_init_cir(struct picolcd_data *data, struct hid_report *report)
> +{
> + /* support not implemented yet */
> + return 0;
> +}
> +
> +static void picolcd_exit_cir(struct picolcd_data *data)
> +{
> +}
> +
> +static inline int picolcd_probe_lcd(struct hid_device *hdev, struct picolcd_data *data)
> +{
> + struct picolcd_pending *verinfo;
> + struct hid_report *report;
> + int error;
> +
> + verinfo = picolcd_send_and_wait(hdev, REPORT_VERSION, NULL, 0);
> + if (!verinfo || !verinfo->in_report) {
> + kfree(verinfo);
> + dev_err(&hdev->dev, "failed to query FW version of device\n");
> + return -ENODEV;
> + } else if (verinfo->in_report->id == REPORT_VERSION && verinfo->raw_size == 2) {
> + dev_info(&hdev->dev, "detected PicoLCD with firmware version %d.%d\n",
> + verinfo->raw_data[0], verinfo->raw_data[1]);
> + data->version[0] = verinfo->raw_data[1];
> + data->version[1] = verinfo->raw_data[0];
> + if (data->version[0] != 0 && data->version[1] != 3)
> + dev_info(&hdev->dev, "Device with untested firmware revision, "
> + "please submit /sys/kernel/debug/hid/%s/rdesc for this device.\n",
> + dev_name(&hdev->dev));
> + kfree(verinfo);
> + verinfo = NULL;
> + } else {
> + dev_err(&hdev->dev, "unexpected version response from PicoLCD"
> + " (report=0x%02x, size=%d)\n",
> + verinfo->in_report->id, verinfo->raw_size);
> + kfree(verinfo);
> + verinfo = NULL;
> + return -ENODEV;
> + }
Please consolidate freeing of acquired resources.
> +
> + /* Setup keypad input device */
> + error = picolcd_init_keys(data, picolcd_in_report(REPORT_KEY_STATE, hdev));
> + if (error)
> + goto err;
> +
> + /* Setup CIR input device */
> + error = picolcd_init_cir(data, picolcd_in_report(REPORT_IR_DATA, hdev));
> + if (error)
> + goto err;
> +
> +#ifdef CONFIG_DEBUG_FS
> + report = picolcd_out_report(REPORT_READ_MEMORY, hdev);
> + if (report && report->maxfield == 1 && report->field[0]->report_size == 8)
> + data->addr_sz = report->field[0]->report_count - 1;
> + else
> + data->addr_sz = -1;
> +#endif
> + return 0;
> +err:
> + picolcd_exit_cir(data);
> + picolcd_exit_keys(data);
> + return error;
> +}
> +
> +static inline int picolcd_probe_bootloader(struct hid_device *hdev, struct picolcd_data *data)
> +{
> + struct picolcd_pending *verinfo;
> + struct hid_report *report;
> +
> + verinfo = picolcd_send_and_wait(hdev, REPORT_VERSION, NULL, 0);
> + if (!verinfo || !verinfo->in_report) {
> + kfree(verinfo);
> + dev_err(&hdev->dev, "failed to query FW version of device\n");
> + return -ENODEV;
> + } else if (verinfo->in_report->id == REPORT_VERSION && verinfo->raw_size == 2) {
> + dev_info(&hdev->dev, "detected PicoLCD with bootloader version %d.%d\n",
> + verinfo->raw_data[1], verinfo->raw_data[0]);
> + data->version[0] = verinfo->raw_data[1];
> + data->version[1] = verinfo->raw_data[0];
> + if (data->version[0] != 1 && data->version[1] != 0)
> + dev_info(&hdev->dev, "Device with untested bootloader revision, "
> + "please submit /sys/kernel/debug/hid/%s/rdesc for this device.\n",
> + dev_name(&hdev->dev));
> + kfree(verinfo);
> + verinfo = NULL;
> + } else {
> + dev_err(&hdev->dev, "unexpected version response from PicoLCD"
> + " (report=0x%02x, size=%d)\n",
> + verinfo->in_report->id, verinfo->raw_size);
> + kfree(verinfo);
> + verinfo = NULL;
> + return -ENODEV;
> + }
>
Please consolidate freeing of acquired resources. Wait, I just saw
afucntion like that... can we combine them somehow?
+
> +#ifdef CONFIG_DEBUG_FS
> + report = picolcd_out_report(REPORT_BL_READ_MEMORY, hdev);
> + if (report && report->maxfield == 1 && report->field[0]->report_size == 8)
> + data->addr_sz = report->field[0]->report_count - 1;
> + else
> + data->addr_sz = -1;
> +#endif
> + return 0;
> +}
> +
> +static int picolcd_probe(struct hid_device *hdev,
> + const struct hid_device_id *id)
> +{
> + struct picolcd_data *data;
> + int error = -ENOMEM;
> +
> + dbg_hid(PICOLCD_NAME " hardware probe...\n");
> +
> + /*
> + * Let's allocate the picolcd data structure, set some reasonable
> + * defaults, and associate it with the device
> + */
> + data = kzalloc(sizeof(struct picolcd_data), GFP_KERNEL);
> + if (data == NULL) {
> + dev_err(&hdev->dev, "can't allocate space for Minibox PicoLCD device data\n");
> + error = -ENOMEM;
> + goto err_no_cleanup;
> + }
> +
> + spin_lock_init(&data->lock);
> + init_completion(&data->ready);
> + data->hdev = hdev;
> + if (hdev->product == USB_DEVICE_ID_PICOLCD_BOOTLOADER)
> + data->status |= PICOLCD_BOOTLOADER;
> + hid_set_drvdata(hdev, data);
> +
> + /* Parse the device reports and start it up */
> + error = hid_parse(hdev);
> + if (error) {
> + dev_err(&hdev->dev, "device report parse failed\n");
> + goto err_cleanup_data;
> + }
> +
> + /* We don't use hidinput but hid_hw_start() fails if nothing is
> + * claimed. So spoof claimed input. */
> + hdev->claimed = HID_CLAIMED_INPUT;
> + error = hid_hw_start(hdev, 0);
> + hdev->claimed = 0;
> + if (error) {
> + dev_err(&hdev->dev, "hardware start failed\n");
> + goto err_cleanup_data;
> + }
> +
> + error = hdev->ll_driver->open(hdev);
> + if (error) {
> + dev_err(&hdev->dev, "failed to open input interrupt pipe for key and IR events\n");
> + goto err_cleanup_hid_hw;
> + }
> +
> + error = sysfs_create_file(&(hdev->dev.kobj), &dev_attr_operation_mode.attr);
device_create_file?
> + if (error) {
> + dev_err(&hdev->dev, "failed to create sysfs attributes\n");
> + goto err_cleanup_hid_ll;
> + }
> +
> + if (data->status & PICOLCD_BOOTLOADER)
> + error = picolcd_probe_bootloader(hdev, data);
> + else
> + error = picolcd_probe_lcd(hdev, data);
> + if (error)
> + goto err_cleanup_sysfs;
> +
> + dbg_hid(PICOLCD_NAME " activated and initialized\n");
> + return 0;
> +
> +err_cleanup_sysfs:
> + sysfs_remove_file(&(hdev->dev.kobj), &dev_attr_operation_mode.attr);
> +err_cleanup_hid_ll:
> + hdev->ll_driver->close(hdev);
> +err_cleanup_hid_hw:
> + hid_hw_stop(hdev);
> +err_cleanup_data:
> + kfree(data);
> +err_no_cleanup:
> + hid_set_drvdata(hdev, NULL);
> +
> + return error;
> +}
> +
> +static void picolcd_remove(struct hid_device *hdev)
> +{
> + struct picolcd_data *data = hid_get_drvdata(hdev);
> + unsigned long flags;
> +
> + dbg_hid(PICOLCD_NAME " hardware remove...\n");
> + spin_lock_irqsave(&data->lock, flags);
> + data->status |= PICOLCD_FAILED;
> + spin_unlock_irqrestore(&data->lock, flags);
> +
> + sysfs_remove_file(&(hdev->dev.kobj), &dev_attr_operation_mode.attr);
> + hdev->ll_driver->close(hdev);
> + hid_hw_stop(hdev);
> +
> + /* Cleanup input */
> + picolcd_exit_cir(data);
> + picolcd_exit_keys(data);
> +
> + /* Finally, clean up the picolcd data itself */
> + kfree(data);
> +}
> +
> +static const struct hid_device_id picolcd_devices[] = {
> + { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD) },
> + { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD_BOOTLOADER) },
> + { }
> +};
> +MODULE_DEVICE_TABLE(hid, picolcd_devices);
> +
> +static struct hid_driver picolcd_driver = {
> + .name = "hid-picolcd",
> + .id_table = picolcd_devices,
> + .probe = picolcd_probe,
> + .remove = picolcd_remove,
> + .raw_event = picolcd_raw_event,
> +#ifdef CONFIG_PM
> + .suspend = picolcd_suspend,
> + .resume = picolcd_resume,
> + .reset_resume = picolcd_reset_resume,
> +#endif
> +};
> +
> +static int __init picolcd_init(void)
> +{
> + return hid_register_driver(&picolcd_driver);
> +}
> +
> +static void __exit picolcd_exit(void)
> +{
> + hid_unregister_driver(&picolcd_driver);
> +}
> +
> +module_init(picolcd_init);
> +module_exit(picolcd_exit);
> +MODULE_DESCRIPTION("Minibox graphics PicoLCD Driver");
> +MODULE_LICENSE("GPL v2");
> --
> 1.6.4.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-input" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/