Re: pm_op(): usb_dev_suspend+0x0/0x10 returns -2 on USB device 8087:0020
From: Ákos Maróy
Date: Thu Mar 04 2010 - 08:55:21 EST
Alan,
in this thread, earlier I wrote:
>> By the way, I noticed above that you have xhci-hcd installed. As far
>> as I know, that driver does not yet support system suspend. You should
>> try unloading xhci-hcd before doing the suspend (both with and without
>> CONFIG_USB_DEBUG).
>
> wow, rmmod xhci - and the suspend goes through fine!
now, I re-installed the system, and suspend doesn't work anymore.
if I have the xhci module loaded, it fails and returns to the screen
right away.
if I unload the xhci module, I get to the character console, and then
the machine hangs there - nothing happens anymore. only a power cycle helps.
I don't know what was different when at least suspend worked :(
I'll try to do some more debugging..
Akos
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/