[PATCH 10/12] ahci: Move PCI code into ahci_pci.c

From: Anton Vorontsov
Date: Tue Mar 02 2010 - 13:30:40 EST

Next message: Anton Vorontsov: "[PATCH 11/12] ahci: Export generic AHCI symbols"
Previous message: Steven J. Magnani: "[PATCH] nommu: get_user_pages(): pin last page on non-page-aligned start"
In reply to: Anton Vorontsov: "Re: [PATCH 12/12] ahci: Add platform driver"
Next in thread: Anton Vorontsov: "[PATCH 11/12] ahci: Export generic AHCI symbols"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This patch should contain no functional changes, just moves code
around.

Currently ahci.c and ahci_pci.c are built into a single module,
so there is no need for EXPORT_SYMBOL_GPL()s, yet. Exports will be
added in a subsequent patch.

Signed-off-by: Anton Vorontsov <avorontsov@xxxxxxxxxxxxx>
---
drivers/ata/Kconfig | 8 +-
drivers/ata/Makefile | 3 +-
drivers/ata/ahci.c | 1426 +-----------------------------------------------
drivers/ata/ahci.h | 277 ++++++++++
drivers/ata/ahci_pci.c | 1175 +++++++++++++++++++++++++++++++++++++++
5 files changed, 1484 insertions(+), 1405 deletions(-)
create mode 100644 drivers/ata/ahci.h
create mode 100644 drivers/ata/ahci_pci.c

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index b17c57f..4656782 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -49,12 +49,18 @@ config SATA_PMP

config SATA_AHCI
tristate "AHCI SATA support"
- depends on PCI
help
This option enables support for AHCI Serial ATA.

If unsure, say N.

+config SATA_AHCI_PCI
+ tristate "PCI AHCI SATA support"
+ depends on SATA_AHCI && PCI
+ default y
+ help
+ This option enables support for PCI AHCI Serial ATA controllers.
+
config SATA_SIL24
tristate "Silicon Image 3124/3132 SATA support"
depends on PCI
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index b7d4923..0ab4c52 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -1,7 +1,8 @@

obj-$(CONFIG_ATA) += libata.o

-obj-$(CONFIG_SATA_AHCI) += ahci.o
+ahci-pci-objs += ahci.o ahci_pci.o
+obj-$(CONFIG_SATA_AHCI_PCI) += ahci-pci.o
obj-$(CONFIG_SATA_SVW) += sata_svw.o
obj-$(CONFIG_ATA_PIIX) += ata_piix.o
obj-$(CONFIG_SATA_PROMISE) += sata_promise.o
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 6694b17..ce08bc6 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -34,34 +34,19 @@

#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/pci.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/device.h>
-#include <linux/dmi.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_cmnd.h>
#include <linux/libata.h>
-
-#define DRV_NAME "ahci"
-#define DRV_VERSION "3.0"
-
-/* Enclosure Management Control */
-#define EM_CTRL_MSG_TYPE 0x000f0000
-
-/* Enclosure Management LED Message Type */
-#define EM_MSG_LED_HBA_PORT 0x0000000f
-#define EM_MSG_LED_PMP_SLOT 0x0000ff00
-#define EM_MSG_LED_VALUE 0xffff0000
-#define EM_MSG_LED_VALUE_ACTIVITY 0x00070000
-#define EM_MSG_LED_VALUE_OFF 0xfff80000
-#define EM_MSG_LED_VALUE_ON 0x00010000
+#include "ahci.h"

static int ahci_skip_host_reset;
-static int ahci_ignore_sss;
+int ahci_ignore_sss;

module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444);
MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)");
@@ -78,240 +63,10 @@ static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
ssize_t size);

-enum {
- AHCI_PCI_BAR = 5,
- AHCI_MAX_PORTS = 32,
- AHCI_MAX_SG = 168, /* hardware max is 64K */
- AHCI_DMA_BOUNDARY = 0xffffffff,
- AHCI_MAX_CMDS = 32,
- AHCI_CMD_SZ = 32,
- AHCI_CMD_SLOT_SZ = AHCI_MAX_CMDS * AHCI_CMD_SZ,
- AHCI_RX_FIS_SZ = 256,
- AHCI_CMD_TBL_CDB = 0x40,
- AHCI_CMD_TBL_HDR_SZ = 0x80,
- AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16),
- AHCI_CMD_TBL_AR_SZ = AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS,
- AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ +
- AHCI_RX_FIS_SZ,
- AHCI_IRQ_ON_SG = (1 << 31),
- AHCI_CMD_ATAPI = (1 << 5),
- AHCI_CMD_WRITE = (1 << 6),
- AHCI_CMD_PREFETCH = (1 << 7),
- AHCI_CMD_RESET = (1 << 8),
- AHCI_CMD_CLR_BUSY = (1 << 10),
-
- RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */
- RX_FIS_SDB = 0x58, /* offset of SDB FIS data */
- RX_FIS_UNK = 0x60, /* offset of Unknown FIS data */
-
- board_ahci = 0,
- board_ahci_vt8251 = 1,
- board_ahci_ign_iferr = 2,
- board_ahci_sb600 = 3,
- board_ahci_mv = 4,
- board_ahci_sb700 = 5, /* for SB700 and SB800 */
- board_ahci_mcp65 = 6,
- board_ahci_nopmp = 7,
- board_ahci_yesncq = 8,
- board_ahci_nosntf = 9,
-
- /* global controller registers */
- HOST_CAP = 0x00, /* host capabilities */
- HOST_CTL = 0x04, /* global host control */
- HOST_IRQ_STAT = 0x08, /* interrupt status */
- HOST_PORTS_IMPL = 0x0c, /* bitmap of implemented ports */
- HOST_VERSION = 0x10, /* AHCI spec. version compliancy */
- HOST_EM_LOC = 0x1c, /* Enclosure Management location */
- HOST_EM_CTL = 0x20, /* Enclosure Management Control */
- HOST_CAP2 = 0x24, /* host capabilities, extended */
-
- /* HOST_CTL bits */
- HOST_RESET = (1 << 0), /* reset controller; self-clear */
- HOST_IRQ_EN = (1 << 1), /* global IRQ enable */
- HOST_AHCI_EN = (1 << 31), /* AHCI enabled */
-
- /* HOST_CAP bits */
- HOST_CAP_SXS = (1 << 5), /* Supports External SATA */
- HOST_CAP_EMS = (1 << 6), /* Enclosure Management support */
- HOST_CAP_CCC = (1 << 7), /* Command Completion Coalescing */
- HOST_CAP_PART = (1 << 13), /* Partial state capable */
- HOST_CAP_SSC = (1 << 14), /* Slumber state capable */
- HOST_CAP_PIO_MULTI = (1 << 15), /* PIO multiple DRQ support */
- HOST_CAP_FBS = (1 << 16), /* FIS-based switching support */
- HOST_CAP_PMP = (1 << 17), /* Port Multiplier support */
- HOST_CAP_ONLY = (1 << 18), /* Supports AHCI mode only */
- HOST_CAP_CLO = (1 << 24), /* Command List Override support */
- HOST_CAP_LED = (1 << 25), /* Supports activity LED */
- HOST_CAP_ALPM = (1 << 26), /* Aggressive Link PM support */
- HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */
- HOST_CAP_MPS = (1 << 28), /* Mechanical presence switch */
- HOST_CAP_SNTF = (1 << 29), /* SNotification register */
- HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */
- HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */
-
- /* HOST_CAP2 bits */
- HOST_CAP2_BOH = (1 << 0), /* BIOS/OS handoff supported */
- HOST_CAP2_NVMHCI = (1 << 1), /* NVMHCI supported */
- HOST_CAP2_APST = (1 << 2), /* Automatic partial to slumber */
-
- /* registers for each SATA port */
- PORT_LST_ADDR = 0x00, /* command list DMA addr */
- PORT_LST_ADDR_HI = 0x04, /* command list DMA addr hi */
- PORT_FIS_ADDR = 0x08, /* FIS rx buf addr */
- PORT_FIS_ADDR_HI = 0x0c, /* FIS rx buf addr hi */
- PORT_IRQ_STAT = 0x10, /* interrupt status */
- PORT_IRQ_MASK = 0x14, /* interrupt enable/disable mask */
- PORT_CMD = 0x18, /* port command */
- PORT_TFDATA = 0x20, /* taskfile data */
- PORT_SIG = 0x24, /* device TF signature */
- PORT_CMD_ISSUE = 0x38, /* command issue */
- PORT_SCR_STAT = 0x28, /* SATA phy register: SStatus */
- PORT_SCR_CTL = 0x2c, /* SATA phy register: SControl */
- PORT_SCR_ERR = 0x30, /* SATA phy register: SError */
- PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */
- PORT_SCR_NTF = 0x3c, /* SATA phy register: SNotification */
-
- /* PORT_IRQ_{STAT,MASK} bits */
- PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */
- PORT_IRQ_TF_ERR = (1 << 30), /* task file error */
- PORT_IRQ_HBUS_ERR = (1 << 29), /* host bus fatal error */
- PORT_IRQ_HBUS_DATA_ERR = (1 << 28), /* host bus data error */
- PORT_IRQ_IF_ERR = (1 << 27), /* interface fatal error */
- PORT_IRQ_IF_NONFATAL = (1 << 26), /* interface non-fatal error */
- PORT_IRQ_OVERFLOW = (1 << 24), /* xfer exhausted available S/G */
- PORT_IRQ_BAD_PMP = (1 << 23), /* incorrect port multiplier */
-
- PORT_IRQ_PHYRDY = (1 << 22), /* PhyRdy changed */
- PORT_IRQ_DEV_ILCK = (1 << 7), /* device interlock */
- PORT_IRQ_CONNECT = (1 << 6), /* port connect change status */
- PORT_IRQ_SG_DONE = (1 << 5), /* descriptor processed */
- PORT_IRQ_UNK_FIS = (1 << 4), /* unknown FIS rx'd */
- PORT_IRQ_SDB_FIS = (1 << 3), /* Set Device Bits FIS rx'd */
- PORT_IRQ_DMAS_FIS = (1 << 2), /* DMA Setup FIS rx'd */
- PORT_IRQ_PIOS_FIS = (1 << 1), /* PIO Setup FIS rx'd */
- PORT_IRQ_D2H_REG_FIS = (1 << 0), /* D2H Register FIS rx'd */
-
- PORT_IRQ_FREEZE = PORT_IRQ_HBUS_ERR |
- PORT_IRQ_IF_ERR |
- PORT_IRQ_CONNECT |
- PORT_IRQ_PHYRDY |
- PORT_IRQ_UNK_FIS |
- PORT_IRQ_BAD_PMP,
- PORT_IRQ_ERROR = PORT_IRQ_FREEZE |
- PORT_IRQ_TF_ERR |
- PORT_IRQ_HBUS_DATA_ERR,
- DEF_PORT_IRQ = PORT_IRQ_ERROR | PORT_IRQ_SG_DONE |
- PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS |
- PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS,
-
- /* PORT_CMD bits */
- PORT_CMD_ASP = (1 << 27), /* Aggressive Slumber/Partial */
- PORT_CMD_ALPE = (1 << 26), /* Aggressive Link PM enable */
- PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */
- PORT_CMD_PMP = (1 << 17), /* PMP attached */
- PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */
- PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */
- PORT_CMD_FIS_RX = (1 << 4), /* Enable FIS receive DMA engine */
- PORT_CMD_CLO = (1 << 3), /* Command list override */
- PORT_CMD_POWER_ON = (1 << 2), /* Power up device */
- PORT_CMD_SPIN_UP = (1 << 1), /* Spin up device */
- PORT_CMD_START = (1 << 0), /* Enable port DMA engine */
-
- PORT_CMD_ICC_MASK = (0xf << 28), /* i/f ICC state mask */
- PORT_CMD_ICC_ACTIVE = (0x1 << 28), /* Put i/f in active state */
- PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */
- PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */
-
- /* hpriv->flags bits */
- AHCI_HFLAG_NO_NCQ = (1 << 0),
- AHCI_HFLAG_IGN_IRQ_IF_ERR = (1 << 1), /* ignore IRQ_IF_ERR */
- AHCI_HFLAG_IGN_SERR_INTERNAL = (1 << 2), /* ignore SERR_INTERNAL */
- AHCI_HFLAG_32BIT_ONLY = (1 << 3), /* force 32bit */
- AHCI_HFLAG_MV_PATA = (1 << 4), /* PATA port */
- AHCI_HFLAG_NO_MSI = (1 << 5), /* no PCI MSI */
- AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */
- AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */
- AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */
- AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */
- AHCI_HFLAG_NO_SUSPEND = (1 << 10), /* don't suspend */
- AHCI_HFLAG_SRST_TOUT_IS_OFFLINE = (1 << 11), /* treat SRST timeout as
- link offline */
- AHCI_HFLAG_NO_SNTF = (1 << 12), /* no sntf */
-
- /* ap->flags bits */
-
- AHCI_FLAG_COMMON = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
- ATA_FLAG_ACPI_SATA | ATA_FLAG_AN |
- ATA_FLAG_IPM,
-
- ICH_MAP = 0x90, /* ICH MAP register */
-
- /* em constants */
- EM_MAX_SLOTS = 8,
- EM_MAX_RETRY = 5,
-
- /* em_ctl bits */
- EM_CTL_RST = (1 << 9), /* Reset */
- EM_CTL_TM = (1 << 8), /* Transmit Message */
- EM_CTL_ALHD = (1 << 26), /* Activity LED */
-};
-
-struct ahci_cmd_hdr {
- __le32 opts;
- __le32 status;
- __le32 tbl_addr;
- __le32 tbl_addr_hi;
- __le32 reserved[4];
-};

-struct ahci_sg {
- __le32 addr;
- __le32 addr_hi;
- __le32 reserved;
- __le32 flags_size;
-};
-
-struct ahci_em_priv {
- enum sw_activity blink_policy;
- struct timer_list timer;
- unsigned long saved_activity;
- unsigned long activity;
- unsigned long led_state;
-};
-
-struct ahci_host_priv {
- void __iomem * mmio; /* bus-independant mem map */
- unsigned int flags; /* AHCI_HFLAG_* */
- u32 cap; /* cap to use */
- u32 cap2; /* cap2 to use */
- u32 port_map; /* port map to use */
- u32 saved_cap; /* saved initial cap */
- u32 saved_cap2; /* saved initial cap2 */
- u32 saved_port_map; /* saved initial port_map */
- u32 em_loc; /* enclosure management location */
-};
-
-struct ahci_port_priv {
- struct ata_link *active_link;
- struct ahci_cmd_hdr *cmd_slot;
- dma_addr_t cmd_slot_dma;
- void *cmd_tbl;
- dma_addr_t cmd_tbl_dma;
- void *rx_fis;
- dma_addr_t rx_fis_dma;
- /* for NCQ spurious interrupt analysis */
- unsigned int ncq_saw_d2h:1;
- unsigned int ncq_saw_dmas:1;
- unsigned int ncq_saw_sdb:1;
- u32 intr_mask; /* interrupts to enable */
- /* enclosure management info per PM slot */
- struct ahci_em_priv em_priv[EM_MAX_SLOTS];
-};

static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
-static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc);
static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc);
static int ahci_port_start(struct ata_port *ap);
@@ -323,14 +78,8 @@ static void ahci_pmp_attach(struct ata_port *ap);
static void ahci_pmp_detach(struct ata_port *ap);
static int ahci_softreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
-static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline);
static int ahci_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
-static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline);
-static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline);
static void ahci_postreset(struct ata_link *link, unsigned int *class);
static void ahci_error_handler(struct ata_port *ap);
static void ahci_post_internal_cmd(struct ata_queued_cmd *qc);
@@ -340,8 +89,6 @@ static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
u32 opts);
#ifdef CONFIG_PM
static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg);
-static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
-static int ahci_pci_device_resume(struct pci_dev *pdev);
#endif
static ssize_t ahci_activity_show(struct ata_device *dev, char *buf);
static ssize_t ahci_activity_store(struct ata_device *dev,
@@ -379,7 +126,7 @@ static struct device_attribute *ahci_sdev_attrs[] = {
NULL
};

-static struct scsi_host_template ahci_sht = {
+struct scsi_host_template ahci_sht = {
ATA_NCQ_SHT(DRV_NAME),
.can_queue = AHCI_MAX_CMDS - 1,
.sg_tablesize = AHCI_MAX_SG,
@@ -388,7 +135,7 @@ static struct scsi_host_template ahci_sht = {
.sdev_attrs = ahci_sdev_attrs,
};

-static struct ata_port_operations ahci_ops = {
+struct ata_port_operations ahci_ops = {
.inherits = &sata_pmp_port_ops,

.qc_defer = sata_pmp_qc_defer_cmd_switch,
@@ -425,312 +172,12 @@ static struct ata_port_operations ahci_ops = {
.port_stop = ahci_port_stop,
};

-static struct ata_port_operations ahci_vt8251_ops = {
- .inherits = &ahci_ops,
- .hardreset = ahci_vt8251_hardreset,
-};
-
-static struct ata_port_operations ahci_p5wdh_ops = {
- .inherits = &ahci_ops,
- .hardreset = ahci_p5wdh_hardreset,
-};
-
-static struct ata_port_operations ahci_sb600_ops = {
- .inherits = &ahci_ops,
- .softreset = ahci_sb600_softreset,
- .pmp_softreset = ahci_sb600_softreset,
-};
-
-#define AHCI_HFLAGS(flags) .private_data = (void *)(flags)
-
-static const struct ata_port_info ahci_port_info[] = {
- [board_ahci] =
- {
- .flags = AHCI_FLAG_COMMON,
- .pio_mask = ATA_PIO4,
- .udma_mask = ATA_UDMA6,
- .port_ops = &ahci_ops,
- },
- [board_ahci_vt8251] =
- {
- AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_PMP),
- .flags = AHCI_FLAG_COMMON,
- .pio_mask = ATA_PIO4,
- .udma_mask = ATA_UDMA6,
- .port_ops = &ahci_vt8251_ops,
- },
- [board_ahci_ign_iferr] =
- {
- AHCI_HFLAGS (AHCI_HFLAG_IGN_IRQ_IF_ERR),
- .flags = AHCI_FLAG_COMMON,
- .pio_mask = ATA_PIO4,
- .udma_mask = ATA_UDMA6,
- .port_ops = &ahci_ops,
- },
- [board_ahci_sb600] =
- {
- AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL |
- AHCI_HFLAG_NO_MSI | AHCI_HFLAG_SECT255 |
- AHCI_HFLAG_32BIT_ONLY),
- .flags = AHCI_FLAG_COMMON,
- .pio_mask = ATA_PIO4,
- .udma_mask = ATA_UDMA6,
- .port_ops = &ahci_sb600_ops,
- },
- [board_ahci_mv] =
- {
- AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI |
- AHCI_HFLAG_MV_PATA | AHCI_HFLAG_NO_PMP),
- .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
- .pio_mask = ATA_PIO4,
- .udma_mask = ATA_UDMA6,
- .port_ops = &ahci_ops,
- },
- [board_ahci_sb700] = /* for SB700 and SB800 */
- {
- AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL),
- .flags = AHCI_FLAG_COMMON,
- .pio_mask = ATA_PIO4,
- .udma_mask = ATA_UDMA6,
- .port_ops = &ahci_sb600_ops,
- },
- [board_ahci_mcp65] =
- {
- AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ),
- .flags = AHCI_FLAG_COMMON,
- .pio_mask = ATA_PIO4,
- .udma_mask = ATA_UDMA6,
- .port_ops = &ahci_ops,
- },
- [board_ahci_nopmp] =
- {
- AHCI_HFLAGS (AHCI_HFLAG_NO_PMP),
- .flags = AHCI_FLAG_COMMON,
- .pio_mask = ATA_PIO4,
- .udma_mask = ATA_UDMA6,
- .port_ops = &ahci_ops,
- },
- [board_ahci_yesncq] =
- {
- AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ),
- .flags = AHCI_FLAG_COMMON,
- .pio_mask = ATA_PIO4,
- .udma_mask = ATA_UDMA6,
- .port_ops = &ahci_ops,
- },
- [board_ahci_nosntf] =
- {
- AHCI_HFLAGS (AHCI_HFLAG_NO_SNTF),
- .flags = AHCI_FLAG_COMMON,
- .pio_mask = ATA_PIO4,
- .udma_mask = ATA_UDMA6,
- .port_ops = &ahci_ops,
- },
-};
-
-static const struct pci_device_id ahci_pci_tbl[] = {
- /* Intel */
- { PCI_VDEVICE(INTEL, 0x2652), board_ahci }, /* ICH6 */
- { PCI_VDEVICE(INTEL, 0x2653), board_ahci }, /* ICH6M */
- { PCI_VDEVICE(INTEL, 0x27c1), board_ahci }, /* ICH7 */
- { PCI_VDEVICE(INTEL, 0x27c5), board_ahci }, /* ICH7M */
- { PCI_VDEVICE(INTEL, 0x27c3), board_ahci }, /* ICH7R */
- { PCI_VDEVICE(AL, 0x5288), board_ahci_ign_iferr }, /* ULi M5288 */
- { PCI_VDEVICE(INTEL, 0x2681), board_ahci }, /* ESB2 */
- { PCI_VDEVICE(INTEL, 0x2682), board_ahci }, /* ESB2 */
- { PCI_VDEVICE(INTEL, 0x2683), board_ahci }, /* ESB2 */
- { PCI_VDEVICE(INTEL, 0x27c6), board_ahci }, /* ICH7-M DH */
- { PCI_VDEVICE(INTEL, 0x2821), board_ahci }, /* ICH8 */
- { PCI_VDEVICE(INTEL, 0x2822), board_ahci_nosntf }, /* ICH8 */
- { PCI_VDEVICE(INTEL, 0x2824), board_ahci }, /* ICH8 */
- { PCI_VDEVICE(INTEL, 0x2829), board_ahci }, /* ICH8M */
- { PCI_VDEVICE(INTEL, 0x282a), board_ahci }, /* ICH8M */
- { PCI_VDEVICE(INTEL, 0x2922), board_ahci }, /* ICH9 */
- { PCI_VDEVICE(INTEL, 0x2923), board_ahci }, /* ICH9 */
- { PCI_VDEVICE(INTEL, 0x2924), board_ahci }, /* ICH9 */
- { PCI_VDEVICE(INTEL, 0x2925), board_ahci }, /* ICH9 */
- { PCI_VDEVICE(INTEL, 0x2927), board_ahci }, /* ICH9 */
- { PCI_VDEVICE(INTEL, 0x2929), board_ahci }, /* ICH9M */
- { PCI_VDEVICE(INTEL, 0x292a), board_ahci }, /* ICH9M */
- { PCI_VDEVICE(INTEL, 0x292b), board_ahci }, /* ICH9M */
- { PCI_VDEVICE(INTEL, 0x292c), board_ahci }, /* ICH9M */
- { PCI_VDEVICE(INTEL, 0x292f), board_ahci }, /* ICH9M */
- { PCI_VDEVICE(INTEL, 0x294d), board_ahci }, /* ICH9 */
- { PCI_VDEVICE(INTEL, 0x294e), board_ahci }, /* ICH9M */
- { PCI_VDEVICE(INTEL, 0x502a), board_ahci }, /* Tolapai */
- { PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */
- { PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */
- { PCI_VDEVICE(INTEL, 0x3a22), board_ahci }, /* ICH10 */
- { PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */
- { PCI_VDEVICE(INTEL, 0x3b22), board_ahci }, /* PCH AHCI */
- { PCI_VDEVICE(INTEL, 0x3b23), board_ahci }, /* PCH AHCI */
- { PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */
- { PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */
- { PCI_VDEVICE(INTEL, 0x3b29), board_ahci }, /* PCH AHCI */
- { PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */
- { PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */
- { PCI_VDEVICE(INTEL, 0x3b2f), board_ahci }, /* PCH AHCI */
-
- /* JMicron 360/1/3/5/6, match class to avoid IDE function */
- { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci_ign_iferr },
-
- /* ATI */
- { PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */
- { PCI_VDEVICE(ATI, 0x4390), board_ahci_sb700 }, /* ATI SB700/800 */
- { PCI_VDEVICE(ATI, 0x4391), board_ahci_sb700 }, /* ATI SB700/800 */
- { PCI_VDEVICE(ATI, 0x4392), board_ahci_sb700 }, /* ATI SB700/800 */
- { PCI_VDEVICE(ATI, 0x4393), board_ahci_sb700 }, /* ATI SB700/800 */
- { PCI_VDEVICE(ATI, 0x4394), board_ahci_sb700 }, /* ATI SB700/800 */
- { PCI_VDEVICE(ATI, 0x4395), board_ahci_sb700 }, /* ATI SB700/800 */
-
- /* AMD */
- { PCI_VDEVICE(AMD, 0x7800), board_ahci }, /* AMD Hudson-2 */
- /* AMD is using RAID class only for ahci controllers */
- { PCI_VENDOR_ID_AMD, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_CLASS_STORAGE_RAID << 8, 0xffffff, board_ahci },
-
- /* VIA */
- { PCI_VDEVICE(VIA, 0x3349), board_ahci_vt8251 }, /* VIA VT8251 */
- { PCI_VDEVICE(VIA, 0x6287), board_ahci_vt8251 }, /* VIA VT8251 */
-
- /* NVIDIA */
- { PCI_VDEVICE(NVIDIA, 0x044c), board_ahci_mcp65 }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x044d), board_ahci_mcp65 }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x044e), board_ahci_mcp65 }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x044f), board_ahci_mcp65 }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x045c), board_ahci_mcp65 }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x045d), board_ahci_mcp65 }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x045e), board_ahci_mcp65 }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x045f), board_ahci_mcp65 }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x0550), board_ahci_yesncq }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0551), board_ahci_yesncq }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0552), board_ahci_yesncq }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0553), board_ahci_yesncq }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0554), board_ahci_yesncq }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0555), board_ahci_yesncq }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0556), board_ahci_yesncq }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0557), board_ahci_yesncq }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0558), board_ahci_yesncq }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0559), board_ahci_yesncq }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x055a), board_ahci_yesncq }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x055b), board_ahci_yesncq }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0580), board_ahci_yesncq }, /* Linux ID */
- { PCI_VDEVICE(NVIDIA, 0x07f0), board_ahci_yesncq }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07f1), board_ahci_yesncq }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07f2), board_ahci_yesncq }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07f3), board_ahci_yesncq }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07f4), board_ahci_yesncq }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07f5), board_ahci_yesncq }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07f6), board_ahci_yesncq }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07f7), board_ahci_yesncq }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07f8), board_ahci_yesncq }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07f9), board_ahci_yesncq }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07fa), board_ahci_yesncq }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07fb), board_ahci_yesncq }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x0ad0), board_ahci }, /* MCP77 */
- { PCI_VDEVICE(NVIDIA, 0x0ad1), board_ahci }, /* MCP77 */
- { PCI_VDEVICE(NVIDIA, 0x0ad2), board_ahci }, /* MCP77 */
- { PCI_VDEVICE(NVIDIA, 0x0ad3), board_ahci }, /* MCP77 */
- { PCI_VDEVICE(NVIDIA, 0x0ad4), board_ahci }, /* MCP77 */
- { PCI_VDEVICE(NVIDIA, 0x0ad5), board_ahci }, /* MCP77 */
- { PCI_VDEVICE(NVIDIA, 0x0ad6), board_ahci }, /* MCP77 */
- { PCI_VDEVICE(NVIDIA, 0x0ad7), board_ahci }, /* MCP77 */
- { PCI_VDEVICE(NVIDIA, 0x0ad8), board_ahci }, /* MCP77 */
- { PCI_VDEVICE(NVIDIA, 0x0ad9), board_ahci }, /* MCP77 */
- { PCI_VDEVICE(NVIDIA, 0x0ada), board_ahci }, /* MCP77 */
- { PCI_VDEVICE(NVIDIA, 0x0adb), board_ahci }, /* MCP77 */
- { PCI_VDEVICE(NVIDIA, 0x0ab4), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0ab5), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0ab6), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0ab7), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0ab8), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0ab9), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0aba), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0abb), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0abc), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0abd), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0abe), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0abf), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0d84), board_ahci }, /* MCP89 */
- { PCI_VDEVICE(NVIDIA, 0x0d85), board_ahci }, /* MCP89 */
- { PCI_VDEVICE(NVIDIA, 0x0d86), board_ahci }, /* MCP89 */
- { PCI_VDEVICE(NVIDIA, 0x0d87), board_ahci }, /* MCP89 */
- { PCI_VDEVICE(NVIDIA, 0x0d88), board_ahci }, /* MCP89 */
- { PCI_VDEVICE(NVIDIA, 0x0d89), board_ahci }, /* MCP89 */
- { PCI_VDEVICE(NVIDIA, 0x0d8a), board_ahci }, /* MCP89 */
- { PCI_VDEVICE(NVIDIA, 0x0d8b), board_ahci }, /* MCP89 */
- { PCI_VDEVICE(NVIDIA, 0x0d8c), board_ahci }, /* MCP89 */
- { PCI_VDEVICE(NVIDIA, 0x0d8d), board_ahci }, /* MCP89 */
- { PCI_VDEVICE(NVIDIA, 0x0d8e), board_ahci }, /* MCP89 */
- { PCI_VDEVICE(NVIDIA, 0x0d8f), board_ahci }, /* MCP89 */
-
- /* SiS */
- { PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */
- { PCI_VDEVICE(SI, 0x1185), board_ahci }, /* SiS 968 */
- { PCI_VDEVICE(SI, 0x0186), board_ahci }, /* SiS 968 */
-
- /* Marvell */
- { PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */
- { PCI_VDEVICE(MARVELL, 0x6121), board_ahci_mv }, /* 6121 */
-
- /* Promise */
- { PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */
-
- /* Generic, PCI class code for AHCI */
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci },
-
- { } /* terminate list */
-};
-
-
-static struct pci_driver ahci_pci_driver = {
- .name = DRV_NAME,
- .id_table = ahci_pci_tbl,
- .probe = ahci_init_one,
- .remove = ata_pci_remove_one,
-#ifdef CONFIG_PM
- .suspend = ahci_pci_device_suspend,
- .resume = ahci_pci_device_resume,
-#endif
-};
-
-static int ahci_em_messages = 1;
+int ahci_em_messages = 1;
module_param(ahci_em_messages, int, 0444);
/* add other LED protocol types when they become supported */
MODULE_PARM_DESC(ahci_em_messages,
"Set AHCI Enclosure Management Message type (0 = disabled, 1 = LED");

-#if defined(CONFIG_PATA_MARVELL) || defined(CONFIG_PATA_MARVELL_MODULE)
-static int marvell_enable;
-#else
-static int marvell_enable = 1;
-#endif
-module_param(marvell_enable, int, 0644);
-MODULE_PARM_DESC(marvell_enable, "Marvell SATA via AHCI (1 = enabled)");
-
-
-static inline int ahci_nr_ports(u32 cap)
-{
- return (cap & 0x1f) + 1;
-}
-
-static inline void __iomem *__ahci_port_base(struct ata_host *host,
- unsigned int port_no)
-{
- struct ahci_host_priv *hpriv = host->private_data;
- void __iomem *mmio = hpriv->mmio;
-
- return mmio + 0x100 + (port_no * 0x80);
-}
-
-static inline void __iomem *ahci_port_base(struct ata_port *ap)
-{
- return __ahci_port_base(ap->host, ap->port_no);
-}
-
static void ahci_enable_ahci(void __iomem *mmio)
{
int i;
@@ -814,10 +261,10 @@ static ssize_t ahci_show_port_cmd(struct device *dev,
* LOCKING:
* None.
*/
-static void ahci_save_initial_config(struct device *dev,
- struct ahci_host_priv *hpriv,
- unsigned int force_port_map,
- unsigned int mask_port_map)
+void ahci_save_initial_config(struct device *dev,
+ struct ahci_host_priv *hpriv,
+ unsigned int force_port_map,
+ unsigned int mask_port_map)
{
void __iomem *mmio = hpriv->mmio;
u32 cap, cap2, vers, port_map;
@@ -920,35 +367,6 @@ static void ahci_save_initial_config(struct device *dev,
hpriv->port_map = port_map;
}

-static void ahci_pci_save_initial_config(struct pci_dev *pdev,
- struct ahci_host_priv *hpriv)
-{
- unsigned int force_port_map = 0;
- unsigned int mask_port_map = 0;
-
- if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361) {
- dev_info(&pdev->dev, "JMB361 has only one port\n");
- force_port_map = 1;
- }
-
- /*
- * Temporary Marvell 6145 hack: PATA port presence
- * is asserted through the standard AHCI port
- * presence register, as bit 4 (counting from 0)
- */
- if (hpriv->flags & AHCI_HFLAG_MV_PATA) {
- if (pdev->device == 0x6121)
- mask_port_map = 0x3;
- else
- mask_port_map = 0xf;
- dev_info(&pdev->dev,
- "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n");
- }
-
- ahci_save_initial_config(&pdev->dev, hpriv, force_port_map,
- mask_port_map);
-}
-
/**
* ahci_restore_initial_config - Restore initial config
* @host: target ATA host
@@ -1011,7 +429,7 @@ static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val)
return -EINVAL;
}

-static void ahci_start_engine(struct ata_port *ap)
+void ahci_start_engine(struct ata_port *ap)
{
void __iomem *port_mmio = ahci_port_base(ap);
u32 tmp;
@@ -1023,7 +441,7 @@ static void ahci_start_engine(struct ata_port *ap)
readl(port_mmio + PORT_CMD); /* flush */
}

-static int ahci_stop_engine(struct ata_port *ap)
+int ahci_stop_engine(struct ata_port *ap)
{
void __iomem *port_mmio = ahci_port_base(ap);
u32 tmp;
@@ -1316,7 +734,7 @@ static int ahci_deinit_port(struct ata_port *ap, const char **emsg)
return 0;
}

-static int ahci_reset_controller(struct ata_host *host)
+int ahci_reset_controller(struct ata_host *host)
{
struct ahci_host_priv *hpriv = host->private_data;
void __iomem *mmio = hpriv->mmio;
@@ -1364,27 +782,6 @@ static int ahci_reset_controller(struct ata_host *host)
return 0;
}

-static int ahci_pci_reset_controller(struct ata_host *host)
-{
- struct pci_dev *pdev = to_pci_dev(host->dev);
-
- ahci_reset_controller(host);
-
- if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
- struct ahci_host_priv *hpriv = host->private_data;
- u16 tmp16;
-
- /* configure PCS */
- pci_read_config_word(pdev, 0x92, &tmp16);
- if ((tmp16 & hpriv->port_map) != hpriv->port_map) {
- tmp16 |= hpriv->port_map;
- pci_write_config_word(pdev, 0x92, tmp16);
- }
- }
-
- return 0;
-}
-
static void ahci_sw_activity(struct ata_link *link)
{
struct ata_port *ap = link->ap;
@@ -1458,7 +855,7 @@ static void ahci_init_sw_activity(struct ata_link *link)
link->flags |= ATA_LFLAG_SW_ACTIVITY;
}

-static int ahci_reset_em(struct ata_host *host)
+int ahci_reset_em(struct ata_host *host)
{
struct ahci_host_priv *hpriv = host->private_data;
void __iomem *mmio = hpriv->mmio;
@@ -1640,7 +1037,7 @@ static void ahci_port_init(struct device *dev, struct ata_port *ap,
writel(1 << port_no, mmio + HOST_IRQ_STAT);
}

-static void ahci_init_controller(struct ata_host *host)
+void ahci_init_controller(struct ata_host *host)
{
struct ahci_host_priv *hpriv = host->private_data;
void __iomem *mmio = hpriv->mmio;
@@ -1665,33 +1062,6 @@ static void ahci_init_controller(struct ata_host *host)
VPRINTK("HOST_CTL 0x%x\n", tmp);
}

-static void ahci_pci_init_controller(struct ata_host *host)
-{
- struct ahci_host_priv *hpriv = host->private_data;
- struct pci_dev *pdev = to_pci_dev(host->dev);
- void __iomem *port_mmio;
- u32 tmp;
- int mv;
-
- if (hpriv->flags & AHCI_HFLAG_MV_PATA) {
- if (pdev->device == 0x6121)
- mv = 2;
- else
- mv = 4;
- port_mmio = __ahci_port_base(host, mv);
-
- writel(0, port_mmio + PORT_IRQ_MASK);
-
- /* clear port IRQ */
- tmp = readl(port_mmio + PORT_IRQ_STAT);
- VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
- if (tmp)
- writel(tmp, port_mmio + PORT_IRQ_STAT);
- }
-
- ahci_init_controller(host);
-}
-
static void ahci_dev_config(struct ata_device *dev)
{
struct ahci_host_priv *hpriv = dev->link->ap->host->private_data;
@@ -1731,7 +1101,7 @@ static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
pp->cmd_slot[tag].tbl_addr_hi = cpu_to_le32((cmd_tbl_dma >> 16) >> 16);
}

-static int ahci_kick_engine(struct ata_port *ap)
+int ahci_kick_engine(struct ata_port *ap)
{
void __iomem *port_mmio = ahci_port_base(ap);
struct ahci_host_priv *hpriv = ap->host->private_data;
@@ -1805,9 +1175,9 @@ static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp,
return 0;
}

-static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
- int pmp, unsigned long deadline,
- int (*check_ready)(struct ata_link *link))
+int ahci_do_softreset(struct ata_link *link, unsigned int *class,
+ int pmp, unsigned long deadline,
+ int (*check_ready)(struct ata_link *link))
{
struct ata_port *ap = link->ap;
struct ahci_host_priv *hpriv = ap->host->private_data;
@@ -1873,7 +1243,7 @@ static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
return rc;
}

-static int ahci_check_ready(struct ata_link *link)
+int ahci_check_ready(struct ata_link *link)
{
void __iomem *port_mmio = ahci_port_base(link->ap);
u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
@@ -1891,55 +1261,6 @@ static int ahci_softreset(struct ata_link *link, unsigned int *class,
return ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready);
}

-static int ahci_sb600_check_ready(struct ata_link *link)
-{
- void __iomem *port_mmio = ahci_port_base(link->ap);
- u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
- u32 irq_status = readl(port_mmio + PORT_IRQ_STAT);
-
- /*
- * There is no need to check TFDATA if BAD PMP is found due to HW bug,
- * which can save timeout delay.
- */
- if (irq_status & PORT_IRQ_BAD_PMP)
- return -EIO;
-
- return ata_check_ready(status);
-}
-
-static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline)
-{
- struct ata_port *ap = link->ap;
- void __iomem *port_mmio = ahci_port_base(ap);
- int pmp = sata_srst_pmp(link);
- int rc;
- u32 irq_sts;
-
- DPRINTK("ENTER\n");
-
- rc = ahci_do_softreset(link, class, pmp, deadline,
- ahci_sb600_check_ready);
-
- /*
- * Soft reset fails on some ATI chips with IPMS set when PMP
- * is enabled but SATA HDD/ODD is connected to SATA port,
- * do soft reset again to port 0.
- */
- if (rc == -EIO) {
- irq_sts = readl(port_mmio + PORT_IRQ_STAT);
- if (irq_sts & PORT_IRQ_BAD_PMP) {
- ata_link_printk(link, KERN_WARNING,
- "applying SB600 PMP SRST workaround "
- "and retrying\n");
- rc = ahci_do_softreset(link, class, 0, deadline,
- ahci_check_ready);
- }
- }
-
- return rc;
-}
-
static int ahci_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
@@ -1972,74 +1293,6 @@ static int ahci_hardreset(struct ata_link *link, unsigned int *class,
return rc;
}

-static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline)
-{
- struct ata_port *ap = link->ap;
- bool online;
- int rc;
-
- DPRINTK("ENTER\n");
-
- ahci_stop_engine(ap);
-
- rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
- deadline, &online, NULL);
-
- ahci_start_engine(ap);
-
- DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
-
- /* vt8251 doesn't clear BSY on signature FIS reception,
- * request follow-up softreset.
- */
- return online ? -EAGAIN : rc;
-}
-
-static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline)
-{
- struct ata_port *ap = link->ap;
- struct ahci_port_priv *pp = ap->private_data;
- u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
- struct ata_taskfile tf;
- bool online;
- int rc;
-
- ahci_stop_engine(ap);
-
- /* clear D2H reception area to properly wait for D2H FIS */
- ata_tf_init(link->device, &tf);
- tf.command = 0x80;
- ata_tf_to_fis(&tf, 0, 0, d2h_fis);
-
- rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
- deadline, &online, NULL);
-
- ahci_start_engine(ap);
-
- /* The pseudo configuration device on SIMG4726 attached to
- * ASUS P5W-DH Deluxe doesn't send signature FIS after
- * hardreset if no device is attached to the first downstream
- * port && the pseudo device locks up on SRST w/ PMP==0. To
- * work around this, wait for !BSY only briefly. If BSY isn't
- * cleared, perform CLO and proceed to IDENTIFY (achieved by
- * ATA_LFLAG_NO_SRST and ATA_LFLAG_ASSUME_ATA).
- *
- * Wait for two seconds. Devices attached to downstream port
- * which can't process the following IDENTIFY after this will
- * have to be reset again. For most cases, this should
- * suffice while making probing snappish enough.
- */
- if (online) {
- rc = ata_wait_after_reset(link, jiffies + 2 * HZ,
- ahci_check_ready);
- if (rc)
- ahci_kick_engine(ap);
- }
- return rc;
-}
-
static void ahci_postreset(struct ata_link *link, unsigned int *class)
{
struct ata_port *ap = link->ap;
@@ -2285,7 +1538,7 @@ static void ahci_port_intr(struct ata_port *ap)
}
}

-static irqreturn_t ahci_interrupt(int irq, void *dev_instance)
+irqreturn_t ahci_interrupt(int irq, void *dev_instance)
{
struct ata_host *host = dev_instance;
struct ahci_host_priv *hpriv;
@@ -2477,56 +1730,6 @@ static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg)

return rc;
}
-
-static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
-{
- struct ata_host *host = dev_get_drvdata(&pdev->dev);
- struct ahci_host_priv *hpriv = host->private_data;
- void __iomem *mmio = hpriv->mmio;
- u32 ctl;
-
- if (mesg.event & PM_EVENT_SUSPEND &&
- hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
- dev_printk(KERN_ERR, &pdev->dev,
- "BIOS update required for suspend/resume\n");
- return -EIO;
- }
-
- if (mesg.event & PM_EVENT_SLEEP) {
- /* AHCI spec rev1.1 section 8.3.3:
- * Software must disable interrupts prior to requesting a
- * transition of the HBA to D3 state.
- */
- ctl = readl(mmio + HOST_CTL);
- ctl &= ~HOST_IRQ_EN;
- writel(ctl, mmio + HOST_CTL);
- readl(mmio + HOST_CTL); /* flush */
- }
-
- return ata_pci_device_suspend(pdev, mesg);
-}
-
-static int ahci_pci_device_resume(struct pci_dev *pdev)
-{
- struct ata_host *host = dev_get_drvdata(&pdev->dev);
- int rc;
-
- rc = ata_pci_device_do_resume(pdev);
- if (rc)
- return rc;
-
- if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
- rc = ahci_pci_reset_controller(host);
- if (rc)
- return rc;
-
- ahci_pci_init_controller(host);
- }
-
- ata_host_resume(host);
-
- return 0;
-}
#endif

static int ahci_port_start(struct ata_port *ap)
@@ -2595,39 +1798,7 @@ static void ahci_port_stop(struct ata_port *ap)
ata_port_printk(ap, KERN_WARNING, "%s (%d)\n", emsg, rc);
}

-static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
-{
- int rc;
-
- if (using_dac &&
- !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
- rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
- if (rc) {
- rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
- if (rc) {
- dev_printk(KERN_ERR, &pdev->dev,
- "64-bit DMA enable failed\n");
- return rc;
- }
- }
- } else {
- rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
- if (rc) {
- dev_printk(KERN_ERR, &pdev->dev,
- "32-bit DMA enable failed\n");
- return rc;
- }
- rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
- if (rc) {
- dev_printk(KERN_ERR, &pdev->dev,
- "32-bit consistent DMA enable failed\n");
- return rc;
- }
- }
- return 0;
-}
-
-static void ahci_print_info(struct ata_host *host, const char *scc_s)
+void ahci_print_info(struct ata_host *host, const char *scc_s)
{
struct ahci_host_priv *hpriv = host->private_data;
void __iomem *mmio = hpriv->mmio;
@@ -2695,353 +1866,8 @@ static void ahci_print_info(struct ata_host *host, const char *scc_s)
);
}

-static void ahci_pci_print_info(struct ata_host *host)
-{
- struct pci_dev *pdev = to_pci_dev(host->dev);
- u16 cc;
- const char *scc_s;
-
- pci_read_config_word(pdev, 0x0a, &cc);
- if (cc == PCI_CLASS_STORAGE_IDE)
- scc_s = "IDE";
- else if (cc == PCI_CLASS_STORAGE_SATA)
- scc_s = "SATA";
- else if (cc == PCI_CLASS_STORAGE_RAID)
- scc_s = "RAID";
- else
- scc_s = "unknown";
-
- ahci_print_info(host, scc_s);
-}
-
-/* On ASUS P5W DH Deluxe, the second port of PCI device 00:1f.2 is
- * hardwired to on-board SIMG 4726. The chipset is ICH8 and doesn't
- * support PMP and the 4726 either directly exports the device
- * attached to the first downstream port or acts as a hardware storage
- * controller and emulate a single ATA device (can be RAID 0/1 or some
- * other configuration).
- *
- * When there's no device attached to the first downstream port of the
- * 4726, "Config Disk" appears, which is a pseudo ATA device to
- * configure the 4726. However, ATA emulation of the device is very
- * lame. It doesn't send signature D2H Reg FIS after the initial
- * hardreset, pukes on SRST w/ PMP==0 and has bunch of other issues.
- *
- * The following function works around the problem by always using
- * hardreset on the port and not depending on receiving signature FIS
- * afterward. If signature FIS isn't received soon, ATA class is
- * assumed without follow-up softreset.
- */
-static void ahci_p5wdh_workaround(struct ata_host *host)
-{
- static struct dmi_system_id sysids[] = {
- {
- .ident = "P5W DH Deluxe",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "ASUSTEK COMPUTER INC"),
- DMI_MATCH(DMI_PRODUCT_NAME, "P5W DH Deluxe"),
- },
- },
- { }
- };
- struct pci_dev *pdev = to_pci_dev(host->dev);
-
- if (pdev->bus->number == 0 && pdev->devfn == PCI_DEVFN(0x1f, 2) &&
- dmi_check_system(sysids)) {
- struct ata_port *ap = host->ports[1];
-
- dev_printk(KERN_INFO, &pdev->dev, "enabling ASUS P5W DH "
- "Deluxe on-board SIMG4726 workaround\n");
-
- ap->ops = &ahci_p5wdh_ops;
- ap->link.flags |= ATA_LFLAG_NO_SRST | ATA_LFLAG_ASSUME_ATA;
- }
-}
-
-/* only some SB600 ahci controllers can do 64bit DMA */
-static bool ahci_sb600_enable_64bit(struct pci_dev *pdev)
-{
- static const struct dmi_system_id sysids[] = {
- /*
- * The oldest version known to be broken is 0901 and
- * working is 1501 which was released on 2007-10-26.
- * Enable 64bit DMA on 1501 and anything newer.
- *
- * Please read bko#9412 for more info.
- */
- {
- .ident = "ASUS M2A-VM",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR,
- "ASUSTeK Computer INC."),
- DMI_MATCH(DMI_BOARD_NAME, "M2A-VM"),
- },
- .driver_data = "20071026", /* yyyymmdd */
- },
- /*
- * All BIOS versions for the MSI K9A2 Platinum (MS-7376)
- * support 64bit DMA.
- *
- * BIOS versions earlier than 1.5 had the Manufacturer DMI
- * fields as "MICRO-STAR INTERANTIONAL CO.,LTD".
- * This spelling mistake was fixed in BIOS version 1.5, so
- * 1.5 and later have the Manufacturer as
- * "MICRO-STAR INTERNATIONAL CO.,LTD".
- * So try to match on DMI_BOARD_VENDOR of "MICRO-STAR INTER".
- *
- * BIOS versions earlier than 1.9 had a Board Product Name
- * DMI field of "MS-7376". This was changed to be
- * "K9A2 Platinum (MS-7376)" in version 1.9, but we can still
- * match on DMI_BOARD_NAME of "MS-7376".
- */
- {
- .ident = "MSI K9A2 Platinum",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR,
- "MICRO-STAR INTER"),
- DMI_MATCH(DMI_BOARD_NAME, "MS-7376"),
- },
- },
- { }
- };
- const struct dmi_system_id *match;
- int year, month, date;
- char buf[9];
-
- match = dmi_first_match(sysids);
- if (pdev->bus->number != 0 || pdev->devfn != PCI_DEVFN(0x12, 0) ||
- !match)
- return false;
-
- if (!match->driver_data)
- goto enable_64bit;
-
- dmi_get_date(DMI_BIOS_DATE, &year, &month, &date);
- snprintf(buf, sizeof(buf), "%04d%02d%02d", year, month, date);
-
- if (strcmp(buf, match->driver_data) >= 0)
- goto enable_64bit;
- else {
- dev_printk(KERN_WARNING, &pdev->dev, "%s: BIOS too old, "
- "forcing 32bit DMA, update BIOS\n", match->ident);
- return false;
- }
-
-enable_64bit:
- dev_printk(KERN_WARNING, &pdev->dev, "%s: enabling 64bit DMA\n",
- match->ident);
- return true;
-}
-
-static bool ahci_broken_system_poweroff(struct pci_dev *pdev)
-{
- static const struct dmi_system_id broken_systems[] = {
- {
- .ident = "HP Compaq nx6310",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
- DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6310"),
- },
- /* PCI slot number of the controller */
- .driver_data = (void *)0x1FUL,
- },
- {
- .ident = "HP Compaq 6720s",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
- DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6720s"),
- },
- /* PCI slot number of the controller */
- .driver_data = (void *)0x1FUL,
- },
-
- { } /* terminate list */
- };
- const struct dmi_system_id *dmi = dmi_first_match(broken_systems);
-
- if (dmi) {
- unsigned long slot = (unsigned long)dmi->driver_data;
- /* apply the quirk only to on-board controllers */
- return slot == PCI_SLOT(pdev->devfn);
- }
-
- return false;
-}
-
-static bool ahci_broken_suspend(struct pci_dev *pdev)
-{
- static const struct dmi_system_id sysids[] = {
- /*
- * On HP dv[4-6] and HDX18 with earlier BIOSen, link
- * to the harddisk doesn't become online after
- * resuming from STR. Warn and fail suspend.
- */
- {
- .ident = "dv4",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
- DMI_MATCH(DMI_PRODUCT_NAME,
- "HP Pavilion dv4 Notebook PC"),
- },
- .driver_data = "F.30", /* cutoff BIOS version */
- },
- {
- .ident = "dv5",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
- DMI_MATCH(DMI_PRODUCT_NAME,
- "HP Pavilion dv5 Notebook PC"),
- },
- .driver_data = "F.16", /* cutoff BIOS version */
- },
- {
- .ident = "dv6",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
- DMI_MATCH(DMI_PRODUCT_NAME,
- "HP Pavilion dv6 Notebook PC"),
- },
- .driver_data = "F.21", /* cutoff BIOS version */
- },
- {
- .ident = "HDX18",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
- DMI_MATCH(DMI_PRODUCT_NAME,
- "HP HDX18 Notebook PC"),
- },
- .driver_data = "F.23", /* cutoff BIOS version */
- },
- /*
- * Acer eMachines G725 has the same problem. BIOS
- * V1.03 is known to be broken. V3.04 is known to
- * work. Inbetween, there are V1.06, V2.06 and V3.03
- * that we don't have much idea about. For now,
- * blacklist anything older than V3.04.
- */
- {
- .ident = "G725",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "eMachines"),
- DMI_MATCH(DMI_PRODUCT_NAME, "eMachines G725"),
- },
- .driver_data = "V3.04", /* cutoff BIOS version */
- },
- { } /* terminate list */
- };
- const struct dmi_system_id *dmi = dmi_first_match(sysids);
- const char *ver;
-
- if (!dmi || pdev->bus->number || pdev->devfn != PCI_DEVFN(0x1f, 2))
- return false;
-
- ver = dmi_get_system_info(DMI_BIOS_VERSION);
-
- return !ver || strcmp(ver, dmi->driver_data) < 0;
-}
-
-static bool ahci_broken_online(struct pci_dev *pdev)
-{
-#define ENCODE_BUSDEVFN(bus, slot, func) \
- (void *)(unsigned long)(((bus) << 8) | PCI_DEVFN((slot), (func)))
- static const struct dmi_system_id sysids[] = {
- /*
- * There are several gigabyte boards which use
- * SIMG5723s configured as hardware RAID. Certain
- * 5723 firmware revisions shipped there keep the link
- * online but fail to answer properly to SRST or
- * IDENTIFY when no device is attached downstream
- * causing libata to retry quite a few times leading
- * to excessive detection delay.
- *
- * As these firmwares respond to the second reset try
- * with invalid device signature, considering unknown
- * sig as offline works around the problem acceptably.
- */
- {
- .ident = "EP45-DQ6",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR,
- "Gigabyte Technology Co., Ltd."),
- DMI_MATCH(DMI_BOARD_NAME, "EP45-DQ6"),
- },
- .driver_data = ENCODE_BUSDEVFN(0x0a, 0x00, 0),
- },
- {
- .ident = "EP45-DS5",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR,
- "Gigabyte Technology Co., Ltd."),
- DMI_MATCH(DMI_BOARD_NAME, "EP45-DS5"),
- },
- .driver_data = ENCODE_BUSDEVFN(0x03, 0x00, 0),
- },
- { } /* terminate list */
- };
-#undef ENCODE_BUSDEVFN
- const struct dmi_system_id *dmi = dmi_first_match(sysids);
- unsigned int val;
-
- if (!dmi)
- return false;
-
- val = (unsigned long)dmi->driver_data;
-
- return pdev->bus->number == (val >> 8) && pdev->devfn == (val & 0xff);
-}
-
-#ifdef CONFIG_ATA_ACPI
-static void ahci_gtf_filter_workaround(struct ata_host *host)
-{
- static const struct dmi_system_id sysids[] = {
- /*
- * Aspire 3810T issues a bunch of SATA enable commands
- * via _GTF including an invalid one and one which is
- * rejected by the device. Among the successful ones
- * is FPDMA non-zero offset enable which when enabled
- * only on the drive side leads to NCQ command
- * failures. Filter it out.
- */
- {
- .ident = "Aspire 3810T",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 3810T"),
- },
- .driver_data = (void *)ATA_ACPI_FILTER_FPDMA_OFFSET,
- },
- { }
- };
- const struct dmi_system_id *dmi = dmi_first_match(sysids);
- unsigned int filter;
- int i;
-
- if (!dmi)
- return;
-
- filter = (unsigned long)dmi->driver_data;
- dev_printk(KERN_INFO, host->dev,
- "applying extra ACPI _GTF filter 0x%x for %s\n",
- filter, dmi->ident);
-
- for (i = 0; i < host->n_ports; i++) {
- struct ata_port *ap = host->ports[i];
- struct ata_link *link;
- struct ata_device *dev;
-
- ata_for_each_link(link, ap, EDGE)
- ata_for_each_dev(dev, link, ALL)
- dev->gtf_filter |= filter;
- }
-}
-#else
-static inline void ahci_gtf_filter_workaround(struct ata_host *host)
-{}
-#endif
-
-static void ahci_set_em_messages(struct ahci_host_priv *hpriv,
- struct ata_port_info *pi)
+void ahci_set_em_messages(struct ahci_host_priv *hpriv,
+ struct ata_port_info *pi)
{
u8 messages;
void __iomem *mmio = hpriv->mmio;
@@ -3062,209 +1888,3 @@ static void ahci_set_em_messages(struct ahci_host_priv *hpriv,
pi->flags |= ATA_FLAG_SW_ACTIVITY;
}
}
-
-static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
-{
- static int printed_version;
- unsigned int board_id = ent->driver_data;
- struct ata_port_info pi = ahci_port_info[board_id];
- const struct ata_port_info *ppi[] = { &pi, NULL };
- struct device *dev = &pdev->dev;
- struct ahci_host_priv *hpriv;
- struct ata_host *host;
- int n_ports, i, rc;
-
- VPRINTK("ENTER\n");
-
- WARN_ON(ATA_MAX_QUEUE > AHCI_MAX_CMDS);
-
- if (!printed_version++)
- dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
-
- /* The AHCI driver can only drive the SATA ports, the PATA driver
- can drive them all so if both drivers are selected make sure
- AHCI stays out of the way */
- if (pdev->vendor == PCI_VENDOR_ID_MARVELL && !marvell_enable)
- return -ENODEV;
-
- /* Promise's PDC42819 is a SAS/SATA controller that has an AHCI mode.
- * At the moment, we can only use the AHCI mode. Let the users know
- * that for SAS drives they're out of luck.
- */
- if (pdev->vendor == PCI_VENDOR_ID_PROMISE)
- dev_printk(KERN_INFO, &pdev->dev, "PDC42819 "
- "can only drive SATA devices with this driver\n");
-
- /* acquire resources */
- rc = pcim_enable_device(pdev);
- if (rc)
- return rc;
-
- /* AHCI controllers often implement SFF compatible interface.
- * Grab all PCI BARs just in case.
- */
- rc = pcim_iomap_regions_request_all(pdev, 1 << AHCI_PCI_BAR, DRV_NAME);
- if (rc == -EBUSY)
- pcim_pin_device(pdev);
- if (rc)
- return rc;
-
- if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
- (pdev->device == 0x2652 || pdev->device == 0x2653)) {
- u8 map;
-
- /* ICH6s share the same PCI ID for both piix and ahci
- * modes. Enabling ahci mode while MAP indicates
- * combined mode is a bad idea. Yield to ata_piix.
- */
- pci_read_config_byte(pdev, ICH_MAP, &map);
- if (map & 0x3) {
- dev_printk(KERN_INFO, &pdev->dev, "controller is in "
- "combined mode, can't enable AHCI mode\n");
- return -ENODEV;
- }
- }
-
- hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
- if (!hpriv)
- return -ENOMEM;
- hpriv->flags |= (unsigned long)pi.private_data;
-
- /* MCP65 revision A1 and A2 can't do MSI */
- if (board_id == board_ahci_mcp65 &&
- (pdev->revision == 0xa1 || pdev->revision == 0xa2))
- hpriv->flags |= AHCI_HFLAG_NO_MSI;
-
- /* SB800 does NOT need the workaround to ignore SERR_INTERNAL */
- if (board_id == board_ahci_sb700 && pdev->revision >= 0x40)
- hpriv->flags &= ~AHCI_HFLAG_IGN_SERR_INTERNAL;
-
- /* only some SB600s can do 64bit DMA */
- if (ahci_sb600_enable_64bit(pdev))
- hpriv->flags &= ~AHCI_HFLAG_32BIT_ONLY;
-
- if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev))
- pci_intx(pdev, 1);
-
- hpriv->mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
-
- /* save initial config */
- ahci_pci_save_initial_config(pdev, hpriv);
-
- /* prepare host */
- if (hpriv->cap & HOST_CAP_NCQ) {
- pi.flags |= ATA_FLAG_NCQ;
- /* Auto-activate optimization is supposed to be supported on
- all AHCI controllers indicating NCQ support, but it seems
- to be broken at least on some NVIDIA MCP79 chipsets.
- Until we get info on which NVIDIA chipsets don't have this
- issue, if any, disable AA on all NVIDIA AHCIs. */
- if (pdev->vendor != PCI_VENDOR_ID_NVIDIA)
- pi.flags |= ATA_FLAG_FPDMA_AA;
- }
-
- if (hpriv->cap & HOST_CAP_PMP)
- pi.flags |= ATA_FLAG_PMP;
-
- ahci_set_em_messages(hpriv, &pi);
-
- if (ahci_broken_system_poweroff(pdev)) {
- pi.flags |= ATA_FLAG_NO_POWEROFF_SPINDOWN;
- dev_info(&pdev->dev,
- "quirky BIOS, skipping spindown on poweroff\n");
- }
-
- if (ahci_broken_suspend(pdev)) {
- hpriv->flags |= AHCI_HFLAG_NO_SUSPEND;
- dev_printk(KERN_WARNING, &pdev->dev,
- "BIOS update required for suspend/resume\n");
- }
-
- if (ahci_broken_online(pdev)) {
- hpriv->flags |= AHCI_HFLAG_SRST_TOUT_IS_OFFLINE;
- dev_info(&pdev->dev,
- "online status unreliable, applying workaround\n");
- }
-
- /* CAP.NP sometimes indicate the index of the last enabled
- * port, at other times, that of the last possible port, so
- * determining the maximum port number requires looking at
- * both CAP.NP and port_map.
- */
- n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
-
- host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
- if (!host)
- return -ENOMEM;
- host->private_data = hpriv;
-
- if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
- host->flags |= ATA_HOST_PARALLEL_SCAN;
- else
- printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n");
-
- if (pi.flags & ATA_FLAG_EM)
- ahci_reset_em(host);
-
- for (i = 0; i < host->n_ports; i++) {
- struct ata_port *ap = host->ports[i];
-
- ata_port_pbar_desc(ap, AHCI_PCI_BAR, -1, "abar");
- ata_port_pbar_desc(ap, AHCI_PCI_BAR,
- 0x100 + ap->port_no * 0x80, "port");
-
- /* set initial link pm policy */
- ap->pm_policy = NOT_AVAILABLE;
-
- /* set enclosure management message type */
- if (ap->flags & ATA_FLAG_EM)
- ap->em_message_type = ahci_em_messages;
-
-
- /* disabled/not-implemented port */
- if (!(hpriv->port_map & (1 << i)))
- ap->ops = &ata_dummy_port_ops;
- }
-
- /* apply workaround for ASUS P5W DH Deluxe mainboard */
- ahci_p5wdh_workaround(host);
-
- /* apply gtf filter quirk */
- ahci_gtf_filter_workaround(host);
-
- /* initialize adapter */
- rc = ahci_configure_dma_masks(pdev, hpriv->cap & HOST_CAP_64);
- if (rc)
- return rc;
-
- rc = ahci_pci_reset_controller(host);
- if (rc)
- return rc;
-
- ahci_pci_init_controller(host);
- ahci_pci_print_info(host);
-
- pci_set_master(pdev);
- return ata_host_activate(host, pdev->irq, ahci_interrupt, IRQF_SHARED,
- &ahci_sht);
-}
-
-static int __init ahci_init(void)
-{
- return pci_register_driver(&ahci_pci_driver);
-}
-
-static void __exit ahci_exit(void)
-{
- pci_unregister_driver(&ahci_pci_driver);
-}
-
-
-MODULE_AUTHOR("Jeff Garzik");
-MODULE_DESCRIPTION("AHCI SATA low-level driver");
-MODULE_LICENSE("GPL");
-MODULE_DEVICE_TABLE(pci, ahci_pci_tbl);
-MODULE_VERSION(DRV_VERSION);
-
-module_init(ahci_init);
-module_exit(ahci_exit);
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
new file mode 100644
index 0000000..6d66717
--- /dev/null
+++ b/drivers/ata/ahci.h
@@ -0,0 +1,277 @@
+#define DRV_NAME "ahci"
+
+/* Enclosure Management Control */
+#define EM_CTRL_MSG_TYPE 0x000f0000
+
+/* Enclosure Management LED Message Type */
+#define EM_MSG_LED_HBA_PORT 0x0000000f
+#define EM_MSG_LED_PMP_SLOT 0x0000ff00
+#define EM_MSG_LED_VALUE 0xffff0000
+#define EM_MSG_LED_VALUE_ACTIVITY 0x00070000
+#define EM_MSG_LED_VALUE_OFF 0xfff80000
+#define EM_MSG_LED_VALUE_ON 0x00010000
+
+enum {
+ AHCI_MAX_PORTS = 32,
+ AHCI_MAX_SG = 168, /* hardware max is 64K */
+ AHCI_DMA_BOUNDARY = 0xffffffff,
+ AHCI_MAX_CMDS = 32,
+ AHCI_CMD_SZ = 32,
+ AHCI_CMD_SLOT_SZ = AHCI_MAX_CMDS * AHCI_CMD_SZ,
+ AHCI_RX_FIS_SZ = 256,
+ AHCI_CMD_TBL_CDB = 0x40,
+ AHCI_CMD_TBL_HDR_SZ = 0x80,
+ AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16),
+ AHCI_CMD_TBL_AR_SZ = AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS,
+ AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ +
+ AHCI_RX_FIS_SZ,
+ AHCI_IRQ_ON_SG = (1 << 31),
+ AHCI_CMD_ATAPI = (1 << 5),
+ AHCI_CMD_WRITE = (1 << 6),
+ AHCI_CMD_PREFETCH = (1 << 7),
+ AHCI_CMD_RESET = (1 << 8),
+ AHCI_CMD_CLR_BUSY = (1 << 10),
+
+ RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */
+ RX_FIS_SDB = 0x58, /* offset of SDB FIS data */
+ RX_FIS_UNK = 0x60, /* offset of Unknown FIS data */
+
+ /* global controller registers */
+ HOST_CAP = 0x00, /* host capabilities */
+ HOST_CTL = 0x04, /* global host control */
+ HOST_IRQ_STAT = 0x08, /* interrupt status */
+ HOST_PORTS_IMPL = 0x0c, /* bitmap of implemented ports */
+ HOST_VERSION = 0x10, /* AHCI spec. version compliancy */
+ HOST_EM_LOC = 0x1c, /* Enclosure Management location */
+ HOST_EM_CTL = 0x20, /* Enclosure Management Control */
+ HOST_CAP2 = 0x24, /* host capabilities, extended */
+
+ /* HOST_CTL bits */
+ HOST_RESET = (1 << 0), /* reset controller; self-clear */
+ HOST_IRQ_EN = (1 << 1), /* global IRQ enable */
+ HOST_AHCI_EN = (1 << 31), /* AHCI enabled */
+
+ /* HOST_CAP bits */
+ HOST_CAP_SXS = (1 << 5), /* Supports External SATA */
+ HOST_CAP_EMS = (1 << 6), /* Enclosure Management support */
+ HOST_CAP_CCC = (1 << 7), /* Command Completion Coalescing */
+ HOST_CAP_PART = (1 << 13), /* Partial state capable */
+ HOST_CAP_SSC = (1 << 14), /* Slumber state capable */
+ HOST_CAP_PIO_MULTI = (1 << 15), /* PIO multiple DRQ support */
+ HOST_CAP_FBS = (1 << 16), /* FIS-based switching support */
+ HOST_CAP_PMP = (1 << 17), /* Port Multiplier support */
+ HOST_CAP_ONLY = (1 << 18), /* Supports AHCI mode only */
+ HOST_CAP_CLO = (1 << 24), /* Command List Override support */
+ HOST_CAP_LED = (1 << 25), /* Supports activity LED */
+ HOST_CAP_ALPM = (1 << 26), /* Aggressive Link PM support */
+ HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */
+ HOST_CAP_MPS = (1 << 28), /* Mechanical presence switch */
+ HOST_CAP_SNTF = (1 << 29), /* SNotification register */
+ HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */
+ HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */
+
+ /* HOST_CAP2 bits */
+ HOST_CAP2_BOH = (1 << 0), /* BIOS/OS handoff supported */
+ HOST_CAP2_NVMHCI = (1 << 1), /* NVMHCI supported */
+ HOST_CAP2_APST = (1 << 2), /* Automatic partial to slumber */
+
+ /* registers for each SATA port */
+ PORT_LST_ADDR = 0x00, /* command list DMA addr */
+ PORT_LST_ADDR_HI = 0x04, /* command list DMA addr hi */
+ PORT_FIS_ADDR = 0x08, /* FIS rx buf addr */
+ PORT_FIS_ADDR_HI = 0x0c, /* FIS rx buf addr hi */
+ PORT_IRQ_STAT = 0x10, /* interrupt status */
+ PORT_IRQ_MASK = 0x14, /* interrupt enable/disable mask */
+ PORT_CMD = 0x18, /* port command */
+ PORT_TFDATA = 0x20, /* taskfile data */
+ PORT_SIG = 0x24, /* device TF signature */
+ PORT_CMD_ISSUE = 0x38, /* command issue */
+ PORT_SCR_STAT = 0x28, /* SATA phy register: SStatus */
+ PORT_SCR_CTL = 0x2c, /* SATA phy register: SControl */
+ PORT_SCR_ERR = 0x30, /* SATA phy register: SError */
+ PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */
+ PORT_SCR_NTF = 0x3c, /* SATA phy register: SNotification */
+
+ /* PORT_IRQ_{STAT,MASK} bits */
+ PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */
+ PORT_IRQ_TF_ERR = (1 << 30), /* task file error */
+ PORT_IRQ_HBUS_ERR = (1 << 29), /* host bus fatal error */
+ PORT_IRQ_HBUS_DATA_ERR = (1 << 28), /* host bus data error */
+ PORT_IRQ_IF_ERR = (1 << 27), /* interface fatal error */
+ PORT_IRQ_IF_NONFATAL = (1 << 26), /* interface non-fatal error */
+ PORT_IRQ_OVERFLOW = (1 << 24), /* xfer exhausted available S/G */
+ PORT_IRQ_BAD_PMP = (1 << 23), /* incorrect port multiplier */
+
+ PORT_IRQ_PHYRDY = (1 << 22), /* PhyRdy changed */
+ PORT_IRQ_DEV_ILCK = (1 << 7), /* device interlock */
+ PORT_IRQ_CONNECT = (1 << 6), /* port connect change status */
+ PORT_IRQ_SG_DONE = (1 << 5), /* descriptor processed */
+ PORT_IRQ_UNK_FIS = (1 << 4), /* unknown FIS rx'd */
+ PORT_IRQ_SDB_FIS = (1 << 3), /* Set Device Bits FIS rx'd */
+ PORT_IRQ_DMAS_FIS = (1 << 2), /* DMA Setup FIS rx'd */
+ PORT_IRQ_PIOS_FIS = (1 << 1), /* PIO Setup FIS rx'd */
+ PORT_IRQ_D2H_REG_FIS = (1 << 0), /* D2H Register FIS rx'd */
+
+ PORT_IRQ_FREEZE = PORT_IRQ_HBUS_ERR |
+ PORT_IRQ_IF_ERR |
+ PORT_IRQ_CONNECT |
+ PORT_IRQ_PHYRDY |
+ PORT_IRQ_UNK_FIS |
+ PORT_IRQ_BAD_PMP,
+ PORT_IRQ_ERROR = PORT_IRQ_FREEZE |
+ PORT_IRQ_TF_ERR |
+ PORT_IRQ_HBUS_DATA_ERR,
+ DEF_PORT_IRQ = PORT_IRQ_ERROR | PORT_IRQ_SG_DONE |
+ PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS |
+ PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS,
+
+ /* PORT_CMD bits */
+ PORT_CMD_ASP = (1 << 27), /* Aggressive Slumber/Partial */
+ PORT_CMD_ALPE = (1 << 26), /* Aggressive Link PM enable */
+ PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */
+ PORT_CMD_PMP = (1 << 17), /* PMP attached */
+ PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */
+ PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */
+ PORT_CMD_FIS_RX = (1 << 4), /* Enable FIS receive DMA engine */
+ PORT_CMD_CLO = (1 << 3), /* Command list override */
+ PORT_CMD_POWER_ON = (1 << 2), /* Power up device */
+ PORT_CMD_SPIN_UP = (1 << 1), /* Spin up device */
+ PORT_CMD_START = (1 << 0), /* Enable port DMA engine */
+
+ PORT_CMD_ICC_MASK = (0xf << 28), /* i/f ICC state mask */
+ PORT_CMD_ICC_ACTIVE = (0x1 << 28), /* Put i/f in active state */
+ PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */
+ PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */
+
+ /* hpriv->flags bits */
+ AHCI_HFLAG_NO_NCQ = (1 << 0),
+ AHCI_HFLAG_IGN_IRQ_IF_ERR = (1 << 1), /* ignore IRQ_IF_ERR */
+ AHCI_HFLAG_IGN_SERR_INTERNAL = (1 << 2), /* ignore SERR_INTERNAL */
+ AHCI_HFLAG_32BIT_ONLY = (1 << 3), /* force 32bit */
+ AHCI_HFLAG_MV_PATA = (1 << 4), /* PATA port */
+ AHCI_HFLAG_NO_MSI = (1 << 5), /* no PCI MSI */
+ AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */
+ AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */
+ AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */
+ AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */
+ AHCI_HFLAG_NO_SUSPEND = (1 << 10), /* don't suspend */
+ AHCI_HFLAG_SRST_TOUT_IS_OFFLINE = (1 << 11), /* treat SRST timeout as
+ link offline */
+ AHCI_HFLAG_NO_SNTF = (1 << 12), /* no sntf */
+
+ /* ap->flags bits */
+
+ AHCI_FLAG_COMMON = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
+ ATA_FLAG_ACPI_SATA | ATA_FLAG_AN |
+ ATA_FLAG_IPM,
+
+ ICH_MAP = 0x90, /* ICH MAP register */
+
+ /* em constants */
+ EM_MAX_SLOTS = 8,
+ EM_MAX_RETRY = 5,
+
+ /* em_ctl bits */
+ EM_CTL_RST = (1 << 9), /* Reset */
+ EM_CTL_TM = (1 << 8), /* Transmit Message */
+ EM_CTL_ALHD = (1 << 26), /* Activity LED */
+};
+
+struct ahci_cmd_hdr {
+ __le32 opts;
+ __le32 status;
+ __le32 tbl_addr;
+ __le32 tbl_addr_hi;
+ __le32 reserved[4];
+};
+
+struct ahci_sg {
+ __le32 addr;
+ __le32 addr_hi;
+ __le32 reserved;
+ __le32 flags_size;
+};
+
+struct ahci_em_priv {
+ enum sw_activity blink_policy;
+ struct timer_list timer;
+ unsigned long saved_activity;
+ unsigned long activity;
+ unsigned long led_state;
+};
+
+struct ahci_port_priv {
+ struct ata_link *active_link;
+ struct ahci_cmd_hdr *cmd_slot;
+ dma_addr_t cmd_slot_dma;
+ void *cmd_tbl;
+ dma_addr_t cmd_tbl_dma;
+ void *rx_fis;
+ dma_addr_t rx_fis_dma;
+ /* for NCQ spurious interrupt analysis */
+ unsigned int ncq_saw_d2h:1;
+ unsigned int ncq_saw_dmas:1;
+ unsigned int ncq_saw_sdb:1;
+ u32 intr_mask; /* interrupts to enable */
+ /* enclosure management info per PM slot */
+ struct ahci_em_priv em_priv[EM_MAX_SLOTS];
+};
+
+struct ahci_host_priv {
+ void __iomem * mmio; /* bus-independant mem map */
+ unsigned int flags; /* AHCI_HFLAG_* */
+ u32 cap; /* cap to use */
+ u32 cap2; /* cap2 to use */
+ u32 port_map; /* port map to use */
+ u32 saved_cap; /* saved initial cap */
+ u32 saved_cap2; /* saved initial cap2 */
+ u32 saved_port_map; /* saved initial port_map */
+ u32 em_loc; /* enclosure management location */
+};
+
+extern int ahci_em_messages;
+extern int ahci_ignore_sss;
+
+extern struct scsi_host_template ahci_sht;
+extern struct ata_port_operations ahci_ops;
+
+void ahci_save_initial_config(struct device *dev,
+ struct ahci_host_priv *hpriv,
+ unsigned int force_port_map,
+ unsigned int mask_port_map);
+void ahci_init_controller(struct ata_host *host);
+int ahci_reset_controller(struct ata_host *host);
+
+int ahci_do_softreset(struct ata_link *link, unsigned int *class,
+ int pmp, unsigned long deadline,
+ int (*check_ready)(struct ata_link *link));
+
+int ahci_stop_engine(struct ata_port *ap);
+void ahci_start_engine(struct ata_port *ap);
+int ahci_check_ready(struct ata_link *link);
+int ahci_kick_engine(struct ata_port *ap);
+void ahci_set_em_messages(struct ahci_host_priv *hpriv,
+ struct ata_port_info *pi);
+int ahci_reset_em(struct ata_host *host);
+irqreturn_t ahci_interrupt(int irq, void *dev_instance);
+void ahci_print_info(struct ata_host *host, const char *scc_s);
+
+static inline void __iomem *__ahci_port_base(struct ata_host *host,
+ unsigned int port_no)
+{
+ struct ahci_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = hpriv->mmio;
+
+ return mmio + 0x100 + (port_no * 0x80);
+}
+
+static inline void __iomem *ahci_port_base(struct ata_port *ap)
+{
+ return __ahci_port_base(ap->host, ap->port_no);
+}
+
+static inline int ahci_nr_ports(u32 cap)
+{
+ return (cap & 0x1f) + 1;
+}
diff --git a/drivers/ata/ahci_pci.c b/drivers/ata/ahci_pci.c
new file mode 100644
index 0000000..2034061
--- /dev/null
+++ b/drivers/ata/ahci_pci.c
@@ -0,0 +1,1175 @@
+/*
+ * ahci.c - AHCI SATA support
+ *
+ * Maintained by: Jeff Garzik <jgarzik@xxxxxxxxx>
+ * Please ALWAYS copy linux-ide@xxxxxxxxxxxxxxx
+ * on emails.
+ *
+ * Copyright 2004-2005 Red Hat, Inc.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ * libata documentation is available via 'make {ps|pdf}docs',
+ * as Documentation/DocBook/libata.*
+ *
+ * AHCI hardware documentation:
+ * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf
+ * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/device.h>
+#include <linux/dmi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
+#include <linux/libata.h>
+#include "ahci.h"
+
+#define DRV_VERSION "3.0"
+
+#if defined(CONFIG_PATA_MARVELL) || defined(CONFIG_PATA_MARVELL_MODULE)
+static int marvell_enable;
+#else
+static int marvell_enable = 1;
+#endif
+module_param(marvell_enable, int, 0644);
+MODULE_PARM_DESC(marvell_enable, "Marvell SATA via AHCI (1 = enabled)");
+
+enum {
+ AHCI_PCI_BAR = 5,
+};
+
+static void ahci_pci_save_initial_config(struct pci_dev *pdev,
+ struct ahci_host_priv *hpriv)
+{
+ unsigned int force_port_map = 0;
+ unsigned int mask_port_map = 0;
+
+ if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361) {
+ dev_info(&pdev->dev, "JMB361 has only one port\n");
+ force_port_map = 1;
+ }
+
+ /*
+ * Temporary Marvell 6145 hack: PATA port presence
+ * is asserted through the standard AHCI port
+ * presence register, as bit 4 (counting from 0)
+ */
+ if (hpriv->flags & AHCI_HFLAG_MV_PATA) {
+ if (pdev->device == 0x6121)
+ mask_port_map = 0x3;
+ else
+ mask_port_map = 0xf;
+ dev_info(&pdev->dev,
+ "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n");
+ }
+
+ ahci_save_initial_config(&pdev->dev, hpriv, force_port_map,
+ mask_port_map);
+}
+
+static void ahci_pci_init_controller(struct ata_host *host)
+{
+ struct ahci_host_priv *hpriv = host->private_data;
+ struct pci_dev *pdev = to_pci_dev(host->dev);
+ void __iomem *port_mmio;
+ u32 tmp;
+ int mv;
+
+ if (hpriv->flags & AHCI_HFLAG_MV_PATA) {
+ if (pdev->device == 0x6121)
+ mv = 2;
+ else
+ mv = 4;
+ port_mmio = __ahci_port_base(host, mv);
+
+ writel(0, port_mmio + PORT_IRQ_MASK);
+
+ /* clear port IRQ */
+ tmp = readl(port_mmio + PORT_IRQ_STAT);
+ VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
+ if (tmp)
+ writel(tmp, port_mmio + PORT_IRQ_STAT);
+ }
+
+ ahci_init_controller(host);
+}
+
+static int ahci_pci_reset_controller(struct ata_host *host)
+{
+ struct pci_dev *pdev = to_pci_dev(host->dev);
+
+ ahci_reset_controller(host);
+
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
+ struct ahci_host_priv *hpriv = host->private_data;
+ u16 tmp16;
+
+ /* configure PCS */
+ pci_read_config_word(pdev, 0x92, &tmp16);
+ if ((tmp16 & hpriv->port_map) != hpriv->port_map) {
+ tmp16 |= hpriv->port_map;
+ pci_write_config_word(pdev, 0x92, tmp16);
+ }
+ }
+
+ return 0;
+}
+
+static int ahci_sb600_check_ready(struct ata_link *link)
+{
+ void __iomem *port_mmio = ahci_port_base(link->ap);
+ u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
+ u32 irq_status = readl(port_mmio + PORT_IRQ_STAT);
+
+ /*
+ * There is no need to check TFDATA if BAD PMP is found due to HW bug,
+ * which can save timeout delay.
+ */
+ if (irq_status & PORT_IRQ_BAD_PMP)
+ return -EIO;
+
+ return ata_check_ready(status);
+}
+
+static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ struct ata_port *ap = link->ap;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ int pmp = sata_srst_pmp(link);
+ int rc;
+ u32 irq_sts;
+
+ DPRINTK("ENTER\n");
+
+ rc = ahci_do_softreset(link, class, pmp, deadline,
+ ahci_sb600_check_ready);
+
+ /*
+ * Soft reset fails on some ATI chips with IPMS set when PMP
+ * is enabled but SATA HDD/ODD is connected to SATA port,
+ * do soft reset again to port 0.
+ */
+ if (rc == -EIO) {
+ irq_sts = readl(port_mmio + PORT_IRQ_STAT);
+ if (irq_sts & PORT_IRQ_BAD_PMP) {
+ ata_link_printk(link, KERN_WARNING,
+ "applying SB600 PMP SRST workaround "
+ "and retrying\n");
+ rc = ahci_do_softreset(link, class, 0, deadline,
+ ahci_check_ready);
+ }
+ }
+
+ return rc;
+}
+
+static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ struct ata_port *ap = link->ap;
+ bool online;
+ int rc;
+
+ DPRINTK("ENTER\n");
+
+ ahci_stop_engine(ap);
+
+ rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
+ deadline, &online, NULL);
+
+ ahci_start_engine(ap);
+
+ DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
+
+ /* vt8251 doesn't clear BSY on signature FIS reception,
+ * request follow-up softreset.
+ */
+ return online ? -EAGAIN : rc;
+}
+
+static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ struct ata_port *ap = link->ap;
+ struct ahci_port_priv *pp = ap->private_data;
+ u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
+ struct ata_taskfile tf;
+ bool online;
+ int rc;
+
+ ahci_stop_engine(ap);
+
+ /* clear D2H reception area to properly wait for D2H FIS */
+ ata_tf_init(link->device, &tf);
+ tf.command = 0x80;
+ ata_tf_to_fis(&tf, 0, 0, d2h_fis);
+
+ rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
+ deadline, &online, NULL);
+
+ ahci_start_engine(ap);
+
+ /* The pseudo configuration device on SIMG4726 attached to
+ * ASUS P5W-DH Deluxe doesn't send signature FIS after
+ * hardreset if no device is attached to the first downstream
+ * port && the pseudo device locks up on SRST w/ PMP==0. To
+ * work around this, wait for !BSY only briefly. If BSY isn't
+ * cleared, perform CLO and proceed to IDENTIFY (achieved by
+ * ATA_LFLAG_NO_SRST and ATA_LFLAG_ASSUME_ATA).
+ *
+ * Wait for two seconds. Devices attached to downstream port
+ * which can't process the following IDENTIFY after this will
+ * have to be reset again. For most cases, this should
+ * suffice while making probing snappish enough.
+ */
+ if (online) {
+ rc = ata_wait_after_reset(link, jiffies + 2 * HZ,
+ ahci_check_ready);
+ if (rc)
+ ahci_kick_engine(ap);
+ }
+ return rc;
+}
+
+#ifdef CONFIG_PM
+static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = hpriv->mmio;
+ u32 ctl;
+
+ if (mesg.event & PM_EVENT_SUSPEND &&
+ hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "BIOS update required for suspend/resume\n");
+ return -EIO;
+ }
+
+ if (mesg.event & PM_EVENT_SLEEP) {
+ /* AHCI spec rev1.1 section 8.3.3:
+ * Software must disable interrupts prior to requesting a
+ * transition of the HBA to D3 state.
+ */
+ ctl = readl(mmio + HOST_CTL);
+ ctl &= ~HOST_IRQ_EN;
+ writel(ctl, mmio + HOST_CTL);
+ readl(mmio + HOST_CTL); /* flush */
+ }
+
+ return ata_pci_device_suspend(pdev, mesg);
+}
+
+static int ahci_pci_device_resume(struct pci_dev *pdev)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ int rc;
+
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
+
+ if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
+ rc = ahci_pci_reset_controller(host);
+ if (rc)
+ return rc;
+
+ ahci_pci_init_controller(host);
+ }
+
+ ata_host_resume(host);
+
+ return 0;
+}
+#endif
+
+static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
+{
+ int rc;
+
+ if (using_dac &&
+ !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
+ rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (rc) {
+ rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "64-bit DMA enable failed\n");
+ return rc;
+ }
+ }
+ } else {
+ rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit DMA enable failed\n");
+ return rc;
+ }
+ rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit consistent DMA enable failed\n");
+ return rc;
+ }
+ }
+ return 0;
+}
+
+static void ahci_pci_print_info(struct ata_host *host)
+{
+ struct pci_dev *pdev = to_pci_dev(host->dev);
+ u16 cc;
+ const char *scc_s;
+
+ pci_read_config_word(pdev, 0x0a, &cc);
+ if (cc == PCI_CLASS_STORAGE_IDE)
+ scc_s = "IDE";
+ else if (cc == PCI_CLASS_STORAGE_SATA)
+ scc_s = "SATA";
+ else if (cc == PCI_CLASS_STORAGE_RAID)
+ scc_s = "RAID";
+ else
+ scc_s = "unknown";
+
+ ahci_print_info(host, scc_s);
+}
+
+static struct ata_port_operations ahci_vt8251_ops = {
+ .inherits = &ahci_ops,
+ .hardreset = ahci_vt8251_hardreset,
+};
+
+static struct ata_port_operations ahci_p5wdh_ops = {
+ .inherits = &ahci_ops,
+ .hardreset = ahci_p5wdh_hardreset,
+};
+
+static struct ata_port_operations ahci_sb600_ops = {
+ .inherits = &ahci_ops,
+ .softreset = ahci_sb600_softreset,
+ .pmp_softreset = ahci_sb600_softreset,
+};
+
+/* On ASUS P5W DH Deluxe, the second port of PCI device 00:1f.2 is
+ * hardwired to on-board SIMG 4726. The chipset is ICH8 and doesn't
+ * support PMP and the 4726 either directly exports the device
+ * attached to the first downstream port or acts as a hardware storage
+ * controller and emulate a single ATA device (can be RAID 0/1 or some
+ * other configuration).
+ *
+ * When there's no device attached to the first downstream port of the
+ * 4726, "Config Disk" appears, which is a pseudo ATA device to
+ * configure the 4726. However, ATA emulation of the device is very
+ * lame. It doesn't send signature D2H Reg FIS after the initial
+ * hardreset, pukes on SRST w/ PMP==0 and has bunch of other issues.
+ *
+ * The following function works around the problem by always using
+ * hardreset on the port and not depending on receiving signature FIS
+ * afterward. If signature FIS isn't received soon, ATA class is
+ * assumed without follow-up softreset.
+ */
+static void ahci_p5wdh_workaround(struct ata_host *host)
+{
+ static struct dmi_system_id sysids[] = {
+ {
+ .ident = "P5W DH Deluxe",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR,
+ "ASUSTEK COMPUTER INC"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "P5W DH Deluxe"),
+ },
+ },
+ { }
+ };
+ struct pci_dev *pdev = to_pci_dev(host->dev);
+
+ if (pdev->bus->number == 0 && pdev->devfn == PCI_DEVFN(0x1f, 2) &&
+ dmi_check_system(sysids)) {
+ struct ata_port *ap = host->ports[1];
+
+ dev_printk(KERN_INFO, &pdev->dev, "enabling ASUS P5W DH "
+ "Deluxe on-board SIMG4726 workaround\n");
+
+ ap->ops = &ahci_p5wdh_ops;
+ ap->link.flags |= ATA_LFLAG_NO_SRST | ATA_LFLAG_ASSUME_ATA;
+ }
+}
+
+/* only some SB600 ahci controllers can do 64bit DMA */
+static bool ahci_sb600_enable_64bit(struct pci_dev *pdev)
+{
+ static const struct dmi_system_id sysids[] = {
+ /*
+ * The oldest version known to be broken is 0901 and
+ * working is 1501 which was released on 2007-10-26.
+ * Enable 64bit DMA on 1501 and anything newer.
+ *
+ * Please read bko#9412 for more info.
+ */
+ {
+ .ident = "ASUS M2A-VM",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR,
+ "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "M2A-VM"),
+ },
+ .driver_data = "20071026", /* yyyymmdd */
+ },
+ /*
+ * All BIOS versions for the MSI K9A2 Platinum (MS-7376)
+ * support 64bit DMA.
+ *
+ * BIOS versions earlier than 1.5 had the Manufacturer DMI
+ * fields as "MICRO-STAR INTERANTIONAL CO.,LTD".
+ * This spelling mistake was fixed in BIOS version 1.5, so
+ * 1.5 and later have the Manufacturer as
+ * "MICRO-STAR INTERNATIONAL CO.,LTD".
+ * So try to match on DMI_BOARD_VENDOR of "MICRO-STAR INTER".
+ *
+ * BIOS versions earlier than 1.9 had a Board Product Name
+ * DMI field of "MS-7376". This was changed to be
+ * "K9A2 Platinum (MS-7376)" in version 1.9, but we can still
+ * match on DMI_BOARD_NAME of "MS-7376".
+ */
+ {
+ .ident = "MSI K9A2 Platinum",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR,
+ "MICRO-STAR INTER"),
+ DMI_MATCH(DMI_BOARD_NAME, "MS-7376"),
+ },
+ },
+ { }
+ };
+ const struct dmi_system_id *match;
+ int year, month, date;
+ char buf[9];
+
+ match = dmi_first_match(sysids);
+ if (pdev->bus->number != 0 || pdev->devfn != PCI_DEVFN(0x12, 0) ||
+ !match)
+ return false;
+
+ if (!match->driver_data)
+ goto enable_64bit;
+
+ dmi_get_date(DMI_BIOS_DATE, &year, &month, &date);
+ snprintf(buf, sizeof(buf), "%04d%02d%02d", year, month, date);
+
+ if (strcmp(buf, match->driver_data) >= 0)
+ goto enable_64bit;
+ else {
+ dev_printk(KERN_WARNING, &pdev->dev, "%s: BIOS too old, "
+ "forcing 32bit DMA, update BIOS\n", match->ident);
+ return false;
+ }
+
+enable_64bit:
+ dev_printk(KERN_WARNING, &pdev->dev, "%s: enabling 64bit DMA\n",
+ match->ident);
+ return true;
+}
+
+static bool ahci_broken_system_poweroff(struct pci_dev *pdev)
+{
+ static const struct dmi_system_id broken_systems[] = {
+ {
+ .ident = "HP Compaq nx6310",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6310"),
+ },
+ /* PCI slot number of the controller */
+ .driver_data = (void *)0x1FUL,
+ },
+ {
+ .ident = "HP Compaq 6720s",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6720s"),
+ },
+ /* PCI slot number of the controller */
+ .driver_data = (void *)0x1FUL,
+ },
+
+ { } /* terminate list */
+ };
+ const struct dmi_system_id *dmi = dmi_first_match(broken_systems);
+
+ if (dmi) {
+ unsigned long slot = (unsigned long)dmi->driver_data;
+ /* apply the quirk only to on-board controllers */
+ return slot == PCI_SLOT(pdev->devfn);
+ }
+
+ return false;
+}
+
+static bool ahci_broken_suspend(struct pci_dev *pdev)
+{
+ static const struct dmi_system_id sysids[] = {
+ /*
+ * On HP dv[4-6] and HDX18 with earlier BIOSen, link
+ * to the harddisk doesn't become online after
+ * resuming from STR. Warn and fail suspend.
+ */
+ {
+ .ident = "dv4",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME,
+ "HP Pavilion dv4 Notebook PC"),
+ },
+ .driver_data = "F.30", /* cutoff BIOS version */
+ },
+ {
+ .ident = "dv5",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME,
+ "HP Pavilion dv5 Notebook PC"),
+ },
+ .driver_data = "F.16", /* cutoff BIOS version */
+ },
+ {
+ .ident = "dv6",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME,
+ "HP Pavilion dv6 Notebook PC"),
+ },
+ .driver_data = "F.21", /* cutoff BIOS version */
+ },
+ {
+ .ident = "HDX18",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME,
+ "HP HDX18 Notebook PC"),
+ },
+ .driver_data = "F.23", /* cutoff BIOS version */
+ },
+ /*
+ * Acer eMachines G725 has the same problem. BIOS
+ * V1.03 is known to be broken. V3.04 is known to
+ * work. Inbetween, there are V1.06, V2.06 and V3.03
+ * that we don't have much idea about. For now,
+ * blacklist anything older than V3.04.
+ */
+ {
+ .ident = "G725",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "eMachines"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "eMachines G725"),
+ },
+ .driver_data = "V3.04", /* cutoff BIOS version */
+ },
+ { } /* terminate list */
+ };
+ const struct dmi_system_id *dmi = dmi_first_match(sysids);
+ const char *ver;
+
+ if (!dmi || pdev->bus->number || pdev->devfn != PCI_DEVFN(0x1f, 2))
+ return false;
+
+ ver = dmi_get_system_info(DMI_BIOS_VERSION);
+
+ return !ver || strcmp(ver, dmi->driver_data) < 0;
+}
+
+static bool ahci_broken_online(struct pci_dev *pdev)
+{
+#define ENCODE_BUSDEVFN(bus, slot, func) \
+ (void *)(unsigned long)(((bus) << 8) | PCI_DEVFN((slot), (func)))
+ static const struct dmi_system_id sysids[] = {
+ /*
+ * There are several gigabyte boards which use
+ * SIMG5723s configured as hardware RAID. Certain
+ * 5723 firmware revisions shipped there keep the link
+ * online but fail to answer properly to SRST or
+ * IDENTIFY when no device is attached downstream
+ * causing libata to retry quite a few times leading
+ * to excessive detection delay.
+ *
+ * As these firmwares respond to the second reset try
+ * with invalid device signature, considering unknown
+ * sig as offline works around the problem acceptably.
+ */
+ {
+ .ident = "EP45-DQ6",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR,
+ "Gigabyte Technology Co., Ltd."),
+ DMI_MATCH(DMI_BOARD_NAME, "EP45-DQ6"),
+ },
+ .driver_data = ENCODE_BUSDEVFN(0x0a, 0x00, 0),
+ },
+ {
+ .ident = "EP45-DS5",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR,
+ "Gigabyte Technology Co., Ltd."),
+ DMI_MATCH(DMI_BOARD_NAME, "EP45-DS5"),
+ },
+ .driver_data = ENCODE_BUSDEVFN(0x03, 0x00, 0),
+ },
+ { } /* terminate list */
+ };
+#undef ENCODE_BUSDEVFN
+ const struct dmi_system_id *dmi = dmi_first_match(sysids);
+ unsigned int val;
+
+ if (!dmi)
+ return false;
+
+ val = (unsigned long)dmi->driver_data;
+
+ return pdev->bus->number == (val >> 8) && pdev->devfn == (val & 0xff);
+}
+
+#ifdef CONFIG_ATA_ACPI
+static void ahci_gtf_filter_workaround(struct ata_host *host)
+{
+ static const struct dmi_system_id sysids[] = {
+ /*
+ * Aspire 3810T issues a bunch of SATA enable commands
+ * via _GTF including an invalid one and one which is
+ * rejected by the device. Among the successful ones
+ * is FPDMA non-zero offset enable which when enabled
+ * only on the drive side leads to NCQ command
+ * failures. Filter it out.
+ */
+ {
+ .ident = "Aspire 3810T",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 3810T"),
+ },
+ .driver_data = (void *)ATA_ACPI_FILTER_FPDMA_OFFSET,
+ },
+ { }
+ };
+ const struct dmi_system_id *dmi = dmi_first_match(sysids);
+ unsigned int filter;
+ int i;
+
+ if (!dmi)
+ return;
+
+ filter = (unsigned long)dmi->driver_data;
+ dev_printk(KERN_INFO, host->dev,
+ "applying extra ACPI _GTF filter 0x%x for %s\n",
+ filter, dmi->ident);
+
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap = host->ports[i];
+ struct ata_link *link;
+ struct ata_device *dev;
+
+ ata_for_each_link(link, ap, EDGE)
+ ata_for_each_dev(dev, link, ALL)
+ dev->gtf_filter |= filter;
+ }
+}
+#else
+static inline void ahci_gtf_filter_workaround(struct ata_host *host)
+{}
+#endif
+
+enum {
+ board_ahci = 0,
+ board_ahci_vt8251 = 1,
+ board_ahci_ign_iferr = 2,
+ board_ahci_sb600 = 3,
+ board_ahci_mv = 4,
+ board_ahci_sb700 = 5, /* for SB700 and SB800 */
+ board_ahci_mcp65 = 6,
+ board_ahci_nopmp = 7,
+ board_ahci_yesncq = 8,
+ board_ahci_nosntf = 9,
+};
+
+#define AHCI_HFLAGS(flags) .private_data = (void *)(flags)
+
+static const struct ata_port_info ahci_port_info[] = {
+ [board_ahci] =
+ {
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_ops,
+ },
+ [board_ahci_vt8251] =
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_PMP),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_vt8251_ops,
+ },
+ [board_ahci_ign_iferr] =
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_IGN_IRQ_IF_ERR),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_ops,
+ },
+ [board_ahci_sb600] =
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL |
+ AHCI_HFLAG_NO_MSI | AHCI_HFLAG_SECT255 |
+ AHCI_HFLAG_32BIT_ONLY),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_sb600_ops,
+ },
+ [board_ahci_mv] =
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI |
+ AHCI_HFLAG_MV_PATA | AHCI_HFLAG_NO_PMP),
+ .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_ops,
+ },
+ [board_ahci_sb700] = /* for SB700 and SB800 */
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_sb600_ops,
+ },
+ [board_ahci_mcp65] =
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_ops,
+ },
+ [board_ahci_nopmp] =
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_NO_PMP),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_ops,
+ },
+ [board_ahci_yesncq] =
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_ops,
+ },
+ [board_ahci_nosntf] =
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_NO_SNTF),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_ops,
+ },
+};
+
+static const struct pci_device_id ahci_pci_tbl[] = {
+ /* Intel */
+ { PCI_VDEVICE(INTEL, 0x2652), board_ahci }, /* ICH6 */
+ { PCI_VDEVICE(INTEL, 0x2653), board_ahci }, /* ICH6M */
+ { PCI_VDEVICE(INTEL, 0x27c1), board_ahci }, /* ICH7 */
+ { PCI_VDEVICE(INTEL, 0x27c5), board_ahci }, /* ICH7M */
+ { PCI_VDEVICE(INTEL, 0x27c3), board_ahci }, /* ICH7R */
+ { PCI_VDEVICE(AL, 0x5288), board_ahci_ign_iferr }, /* ULi M5288 */
+ { PCI_VDEVICE(INTEL, 0x2681), board_ahci }, /* ESB2 */
+ { PCI_VDEVICE(INTEL, 0x2682), board_ahci }, /* ESB2 */
+ { PCI_VDEVICE(INTEL, 0x2683), board_ahci }, /* ESB2 */
+ { PCI_VDEVICE(INTEL, 0x27c6), board_ahci }, /* ICH7-M DH */
+ { PCI_VDEVICE(INTEL, 0x2821), board_ahci }, /* ICH8 */
+ { PCI_VDEVICE(INTEL, 0x2822), board_ahci_nosntf }, /* ICH8 */
+ { PCI_VDEVICE(INTEL, 0x2824), board_ahci }, /* ICH8 */
+ { PCI_VDEVICE(INTEL, 0x2829), board_ahci }, /* ICH8M */
+ { PCI_VDEVICE(INTEL, 0x282a), board_ahci }, /* ICH8M */
+ { PCI_VDEVICE(INTEL, 0x2922), board_ahci }, /* ICH9 */
+ { PCI_VDEVICE(INTEL, 0x2923), board_ahci }, /* ICH9 */
+ { PCI_VDEVICE(INTEL, 0x2924), board_ahci }, /* ICH9 */
+ { PCI_VDEVICE(INTEL, 0x2925), board_ahci }, /* ICH9 */
+ { PCI_VDEVICE(INTEL, 0x2927), board_ahci }, /* ICH9 */
+ { PCI_VDEVICE(INTEL, 0x2929), board_ahci }, /* ICH9M */
+ { PCI_VDEVICE(INTEL, 0x292a), board_ahci }, /* ICH9M */
+ { PCI_VDEVICE(INTEL, 0x292b), board_ahci }, /* ICH9M */
+ { PCI_VDEVICE(INTEL, 0x292c), board_ahci }, /* ICH9M */
+ { PCI_VDEVICE(INTEL, 0x292f), board_ahci }, /* ICH9M */
+ { PCI_VDEVICE(INTEL, 0x294d), board_ahci }, /* ICH9 */
+ { PCI_VDEVICE(INTEL, 0x294e), board_ahci }, /* ICH9M */
+ { PCI_VDEVICE(INTEL, 0x502a), board_ahci }, /* Tolapai */
+ { PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */
+ { PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */
+ { PCI_VDEVICE(INTEL, 0x3a22), board_ahci }, /* ICH10 */
+ { PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */
+ { PCI_VDEVICE(INTEL, 0x3b22), board_ahci }, /* PCH AHCI */
+ { PCI_VDEVICE(INTEL, 0x3b23), board_ahci }, /* PCH AHCI */
+ { PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */
+ { PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */
+ { PCI_VDEVICE(INTEL, 0x3b29), board_ahci }, /* PCH AHCI */
+ { PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */
+ { PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */
+ { PCI_VDEVICE(INTEL, 0x3b2f), board_ahci }, /* PCH AHCI */
+
+ /* JMicron 360/1/3/5/6, match class to avoid IDE function */
+ { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci_ign_iferr },
+
+ /* ATI */
+ { PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */
+ { PCI_VDEVICE(ATI, 0x4390), board_ahci_sb700 }, /* ATI SB700/800 */
+ { PCI_VDEVICE(ATI, 0x4391), board_ahci_sb700 }, /* ATI SB700/800 */
+ { PCI_VDEVICE(ATI, 0x4392), board_ahci_sb700 }, /* ATI SB700/800 */
+ { PCI_VDEVICE(ATI, 0x4393), board_ahci_sb700 }, /* ATI SB700/800 */
+ { PCI_VDEVICE(ATI, 0x4394), board_ahci_sb700 }, /* ATI SB700/800 */
+ { PCI_VDEVICE(ATI, 0x4395), board_ahci_sb700 }, /* ATI SB700/800 */
+
+ /* AMD */
+ { PCI_VDEVICE(AMD, 0x7800), board_ahci }, /* AMD Hudson-2 */
+ /* AMD is using RAID class only for ahci controllers */
+ { PCI_VENDOR_ID_AMD, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_RAID << 8, 0xffffff, board_ahci },
+
+ /* VIA */
+ { PCI_VDEVICE(VIA, 0x3349), board_ahci_vt8251 }, /* VIA VT8251 */
+ { PCI_VDEVICE(VIA, 0x6287), board_ahci_vt8251 }, /* VIA VT8251 */
+
+ /* NVIDIA */
+ { PCI_VDEVICE(NVIDIA, 0x044c), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x044d), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x044e), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x044f), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x045c), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x045d), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x045e), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x045f), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x0550), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0551), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0552), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0553), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0554), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0555), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0556), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0557), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0558), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0559), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x055a), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x055b), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0580), board_ahci_yesncq }, /* Linux ID */
+ { PCI_VDEVICE(NVIDIA, 0x07f0), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f1), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f2), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f3), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f4), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f5), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f6), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f7), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f8), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f9), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07fa), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07fb), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad0), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad1), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad2), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad3), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad4), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad5), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad6), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad7), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad8), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad9), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ada), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0adb), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ab4), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0ab5), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0ab6), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0ab7), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0ab8), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0ab9), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0aba), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0abb), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0abc), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0abd), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0abe), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0abf), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0d84), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d85), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d86), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d87), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d88), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d89), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8a), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8b), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8c), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8d), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8e), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8f), board_ahci }, /* MCP89 */
+
+ /* SiS */
+ { PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */
+ { PCI_VDEVICE(SI, 0x1185), board_ahci }, /* SiS 968 */
+ { PCI_VDEVICE(SI, 0x0186), board_ahci }, /* SiS 968 */
+
+ /* Marvell */
+ { PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */
+ { PCI_VDEVICE(MARVELL, 0x6121), board_ahci_mv }, /* 6121 */
+
+ /* Promise */
+ { PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */
+
+ /* Generic, PCI class code for AHCI */
+ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci },
+
+ { } /* terminate list */
+};
+
+static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ static int printed_version;
+ unsigned int board_id = ent->driver_data;
+ struct ata_port_info pi = ahci_port_info[board_id];
+ const struct ata_port_info *ppi[] = { &pi, NULL };
+ struct device *dev = &pdev->dev;
+ struct ahci_host_priv *hpriv;
+ struct ata_host *host;
+ int n_ports, i, rc;
+
+ VPRINTK("ENTER\n");
+
+ WARN_ON(ATA_MAX_QUEUE > AHCI_MAX_CMDS);
+
+ if (!printed_version++)
+ dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+
+ /* The AHCI driver can only drive the SATA ports, the PATA driver
+ can drive them all so if both drivers are selected make sure
+ AHCI stays out of the way */
+ if (pdev->vendor == PCI_VENDOR_ID_MARVELL && !marvell_enable)
+ return -ENODEV;
+
+ /* Promise's PDC42819 is a SAS/SATA controller that has an AHCI mode.
+ * At the moment, we can only use the AHCI mode. Let the users know
+ * that for SAS drives they're out of luck.
+ */
+ if (pdev->vendor == PCI_VENDOR_ID_PROMISE)
+ dev_printk(KERN_INFO, &pdev->dev, "PDC42819 "
+ "can only drive SATA devices with this driver\n");
+
+ /* acquire resources */
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
+
+ /* AHCI controllers often implement SFF compatible interface.
+ * Grab all PCI BARs just in case.
+ */
+ rc = pcim_iomap_regions_request_all(pdev, 1 << AHCI_PCI_BAR, DRV_NAME);
+ if (rc == -EBUSY)
+ pcim_pin_device(pdev);
+ if (rc)
+ return rc;
+
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+ (pdev->device == 0x2652 || pdev->device == 0x2653)) {
+ u8 map;
+
+ /* ICH6s share the same PCI ID for both piix and ahci
+ * modes. Enabling ahci mode while MAP indicates
+ * combined mode is a bad idea. Yield to ata_piix.
+ */
+ pci_read_config_byte(pdev, ICH_MAP, &map);
+ if (map & 0x3) {
+ dev_printk(KERN_INFO, &pdev->dev, "controller is in "
+ "combined mode, can't enable AHCI mode\n");
+ return -ENODEV;
+ }
+ }
+
+ hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
+ if (!hpriv)
+ return -ENOMEM;
+ hpriv->flags |= (unsigned long)pi.private_data;
+
+ /* MCP65 revision A1 and A2 can't do MSI */
+ if (board_id == board_ahci_mcp65 &&
+ (pdev->revision == 0xa1 || pdev->revision == 0xa2))
+ hpriv->flags |= AHCI_HFLAG_NO_MSI;
+
+ /* SB800 does NOT need the workaround to ignore SERR_INTERNAL */
+ if (board_id == board_ahci_sb700 && pdev->revision >= 0x40)
+ hpriv->flags &= ~AHCI_HFLAG_IGN_SERR_INTERNAL;
+
+ /* only some SB600s can do 64bit DMA */
+ if (ahci_sb600_enable_64bit(pdev))
+ hpriv->flags &= ~AHCI_HFLAG_32BIT_ONLY;
+
+ if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev))
+ pci_intx(pdev, 1);
+
+ hpriv->mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
+
+ /* save initial config */
+ ahci_pci_save_initial_config(pdev, hpriv);
+
+ /* prepare host */
+ if (hpriv->cap & HOST_CAP_NCQ) {
+ pi.flags |= ATA_FLAG_NCQ;
+ /* Auto-activate optimization is supposed to be supported on
+ all AHCI controllers indicating NCQ support, but it seems
+ to be broken at least on some NVIDIA MCP79 chipsets.
+ Until we get info on which NVIDIA chipsets don't have this
+ issue, if any, disable AA on all NVIDIA AHCIs. */
+ if (pdev->vendor != PCI_VENDOR_ID_NVIDIA)
+ pi.flags |= ATA_FLAG_FPDMA_AA;
+ }
+
+ if (hpriv->cap & HOST_CAP_PMP)
+ pi.flags |= ATA_FLAG_PMP;
+
+ ahci_set_em_messages(hpriv, &pi);
+
+ if (ahci_broken_system_poweroff(pdev)) {
+ pi.flags |= ATA_FLAG_NO_POWEROFF_SPINDOWN;
+ dev_info(&pdev->dev,
+ "quirky BIOS, skipping spindown on poweroff\n");
+ }
+
+ if (ahci_broken_suspend(pdev)) {
+ hpriv->flags |= AHCI_HFLAG_NO_SUSPEND;
+ dev_printk(KERN_WARNING, &pdev->dev,
+ "BIOS update required for suspend/resume\n");
+ }
+
+ if (ahci_broken_online(pdev)) {
+ hpriv->flags |= AHCI_HFLAG_SRST_TOUT_IS_OFFLINE;
+ dev_info(&pdev->dev,
+ "online status unreliable, applying workaround\n");
+ }
+
+ /* CAP.NP sometimes indicate the index of the last enabled
+ * port, at other times, that of the last possible port, so
+ * determining the maximum port number requires looking at
+ * both CAP.NP and port_map.
+ */
+ n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
+
+ host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
+ if (!host)
+ return -ENOMEM;
+ host->private_data = hpriv;
+
+ if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
+ host->flags |= ATA_HOST_PARALLEL_SCAN;
+ else
+ printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n");
+
+ if (pi.flags & ATA_FLAG_EM)
+ ahci_reset_em(host);
+
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap = host->ports[i];
+
+ ata_port_pbar_desc(ap, AHCI_PCI_BAR, -1, "abar");
+ ata_port_pbar_desc(ap, AHCI_PCI_BAR,
+ 0x100 + ap->port_no * 0x80, "port");
+
+ /* set initial link pm policy */
+ ap->pm_policy = NOT_AVAILABLE;
+
+ /* set enclosure management message type */
+ if (ap->flags & ATA_FLAG_EM)
+ ap->em_message_type = ahci_em_messages;
+
+
+ /* disabled/not-implemented port */
+ if (!(hpriv->port_map & (1 << i)))
+ ap->ops = &ata_dummy_port_ops;
+ }
+
+ /* apply workaround for ASUS P5W DH Deluxe mainboard */
+ ahci_p5wdh_workaround(host);
+
+ /* apply gtf filter quirk */
+ ahci_gtf_filter_workaround(host);
+
+ /* initialize adapter */
+ rc = ahci_configure_dma_masks(pdev, hpriv->cap & HOST_CAP_64);
+ if (rc)
+ return rc;
+
+ rc = ahci_pci_reset_controller(host);
+ if (rc)
+ return rc;
+
+ ahci_pci_init_controller(host);
+ ahci_pci_print_info(host);
+
+ pci_set_master(pdev);
+ return ata_host_activate(host, pdev->irq, ahci_interrupt, IRQF_SHARED,
+ &ahci_sht);
+}
+
+static struct pci_driver ahci_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = ahci_pci_tbl,
+ .probe = ahci_init_one,
+ .remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
+ .suspend = ahci_pci_device_suspend,
+ .resume = ahci_pci_device_resume,
+#endif
+};
+
+static int __init ahci_init(void)
+{
+ return pci_register_driver(&ahci_pci_driver);
+}
+
+static void __exit ahci_exit(void)
+{
+ pci_unregister_driver(&ahci_pci_driver);
+}
+
+
+MODULE_AUTHOR("Jeff Garzik");
+MODULE_DESCRIPTION("AHCI SATA low-level driver");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, ahci_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(ahci_init);
+module_exit(ahci_exit);
--
1.7.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Anton Vorontsov: "[PATCH 11/12] ahci: Export generic AHCI symbols"
Previous message: Steven J. Magnani: "[PATCH] nommu: get_user_pages(): pin last page on non-page-aligned start"
In reply to: Anton Vorontsov: "Re: [PATCH 12/12] ahci: Add platform driver"
Next in thread: Anton Vorontsov: "[PATCH 11/12] ahci: Export generic AHCI symbols"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]