Re: [RFC, PATCH 0/2] Reworking seeky detection for 2.6.34

[Vivek Goyal]

On Sat, Feb 27, 2010 at 07:45:38PM +0100, Corrado Zoccolo wrote:
> 
> Hi, I'm resending the rework seeky detection patch, together with 
> the companion patch for SSDs, in order to get some testing on more
> hardware.
> 
> The first patch in the series fixes a regression introduced in 2.6.33
> for random mmap reads of more than one page, when multiple processes
> are competing for the disk.
> There is at least one HW RAID controller where it reduces performance,
> though (but this controller generally performs worse with CFQ than
> with NOOP, probably because it is performing non-work-conserving 
> I/O scheduling inside), so more testing on RAIDs is appreciated.
> 

Hi Corrado,

This time I don't have the machine where I had previously reported
regressions. But somebody has exported me two Lun from an storage box
over SAN and I have done my testing on that. With this seek patch applied, 
I still see the regressions.

iosched=cfq     Filesz=1G   bs=64K

                        2.6.33              2.6.33-seek
workload  Set NR  RDBW(KB/s)  WRBW(KB/s)  RDBW(KB/s)  WRBW(KB/s)    %Rd %Wr
--------  --- --  ----------  ----------  ----------  ----------   ---- ----
brrmmap   3   1   7113        0           7044        0              0% 0%
brrmmap   3   2   6977        0           6774        0             -2% 0%
brrmmap   3   4   7410        0           6181        0            -16% 0%
brrmmap   3   8   9405        0           6020        0            -35% 0%
brrmmap   3   16  11445       0           5792        0            -49% 0%

                        2.6.33              2.6.33-seek
workload  Set NR  RDBW(KB/s)  WRBW(KB/s)  RDBW(KB/s)  WRBW(KB/s)    %Rd %Wr
--------  --- --  ----------  ----------  ----------  ----------   ---- ----
drrmmap   3   1   7195        0           7337        0              1% 0%
drrmmap   3   2   7016        0           6855        0             -2% 0%
drrmmap   3   4   7438        0           6103        0            -17% 0%
drrmmap   3   8   9298        0           6020        0            -35% 0%
drrmmap   3   16  11576       0           5827        0            -49% 0%


I have run buffered random reads on mmaped files (brrmmap) and direct
random reads on mmaped files (drrmmap) using fio. I have run these for
increasing number of threads and did this for 3 times and took average of
three sets for reporting.

I have used filesize 1G and bz=64K and ran each test sample for 30
seconds.

Because with new seek logic, we will mark above type of cfqq as non seeky
and will idle on these, I take a significant hit in performance on storage
boxes which have more than 1 spindle.

So basically, the regression is not only on that particular RAID card but
on other kind of devices which can support more than one spindle.

I will run some test on single SATA disk also where this patch should
benefit.

Based on testing results so far, I am not a big fan of marking these mmap
queues as sync-idle. I guess if this patch really benefits, then we need
to first put in place some kind of logic to detect whether if it is single
spindle SATA disk and then on these disks, mark mmap queues as sync.

Apart from synthetic workloads, in practice, where this patch is helping you?

Thanks
Vivek


> The second patch changes the seeky detection logic to be meaningful
> also for SSDs. A seeky request is one that doesn't utilize the full
> bandwidth for the device. For SSDs, this happens for small requests,
> regardless of their location.
> With this change, the grouping of "seeky" requests done by CFQ can
> result in a fairer distribution of disk service time among processes.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/