Re: [REGRESSION] "USB: use kfifo to buffer usb-generic serial writes"causes gobi_loader to hang

[Anssi Hannula]

On 05.02.2010 23:59, Oliver Neukum wrote:
> Am Freitag, 5. Februar 2010 20:58:17 schrieb Matthew Garrett:
>> drivers/usb/serial/usb-serial.c: usb_serial_port_work - port 0
>> drivers/usb/serial/usb-serial.c: serial_write - port 0, 2048 byte(s)
>> drivers/usb/serial/generic.c: usb_serial_generic_write - port 0, 2048 bytes
>> drivers/usb/serial/generic.c: usb_serial_generic_write - put 512 bytes into fifo
>> drivers/usb/serial/usb-serial.c: serial_write - port 0, 1536 byte(s)
>> drivers/usb/serial/generic.c: usb_serial_generic_write - port 0, 1536 bytes
>> drivers/usb/serial/generic.c: usb_serial_generic_write - put 0 bytes into fifo
>> drivers/usb/serial/generic.c: usb_serial_generic_write - FIFO is full
> 
> OK, could you also get an usbmon trace? This would allow a determination
> whether the submitted URB doesn't finish for some reason, or whether
> no URB is submitted, possibly because a wakeup is missed.

I'm also affected by this regression. Here's an usbmon trace of
gobi_loader hanging:
http://stuff.onse.fi/gobi2000/gobi-regression.mon.log

-- 
Anssi Hannula
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/