PROBLEM: kernel 2.6.32-7 will not boot -- could not find /dev/rootDell Vostro 1000

[imran.javeed@xxxxxxxxxxxxxxxx]

[1.] One line summary of the problem: Upgrade to 2.6.32-7 will not boot(cannot
recognize disk)
Â

[2.] Full description of the problem/report:
Â
I am trying to upgrade my kernel from 2.6.18-53 to 2.6.32-7, the problem i am
having is that the 2.6.32 kernel will not recognize my SATA disk. I have a Dell
Vostro 1000 & have happily been using linux(centos5) with no issues.
Â
Ive ensured the correct options have been set in .config, included libata, ahci
within the kernel(they are not modules) and checked various other information
sources on the net, but it still does not work.(this is the 3rd night now &
still no fix)
Â
Hence my email to you to try & fix for me please?
Â
Attached is the information you require

[3.] Keywords (i.e., modules, networking, kernel):
SATA SB600 ATI
Â
[4.] Kernel information
2.6.32-7
[4.1.] Kernel version (from /proc/version):
CURRENT_VERSION == Linux version 2.6.18-53.el5PAE
(mockbuild@xxxxxxxxxxxxxxxxxxx) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14))
#1 SMP Mon Nov 12 02:55:09 EST 2007

[4.2.] Kernel .config file:
Attached
Â
[5.] Most recent kernel version which did not have the bug:
That im using right now 2.6.18-53
Â
[6.] Output of Oops.. message (if applicable) with symbolic information
ÂÂÂÂ resolved (see Documentation/oops-tracing.txt)
N/A
Â
[7.] A small shell script or example program which triggers the
ÂÂÂÂ problem (if possible)
N/A
Â
[8.] Environment
Â
[8.1.] Software (add the output of the ver_linux script here)
Linux uhud 2.6.18-53.el5PAE #1 SMP Mon Nov 12 02:55:09 EST 2007 i686 athlon i386
GNU/Linux

Gnu CÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ 4.1.2
Gnu makeÂÂÂÂÂÂÂÂÂÂÂÂÂÂ 3.81
binutilsÂÂÂÂÂÂÂÂÂÂÂÂÂÂ 2.17.50.0.6
util-linuxÂÂÂÂÂÂÂÂÂÂÂÂ 2.13-pre7
mountÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ 2.13-pre7
module-init-toolsÂÂÂÂÂ 3.3-pre2
e2fsprogsÂÂÂÂÂÂÂÂÂÂÂÂÂ 1.39
pcmciautilsÂÂÂÂÂÂÂÂÂÂÂ 014
quota-toolsÂÂÂÂÂÂÂÂÂÂÂ 3.13.
PPPÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ 2.4.4
isdn4k-utilsÂÂÂÂÂÂÂÂÂÂ 3.9
Linux C LibraryÂÂÂÂÂÂÂ 2.5
Dynamic linker (ldd)ÂÂ 2.5
ProcpsÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ 3.2.7
Net-toolsÂÂÂÂÂÂÂÂÂÂÂÂÂ 1.60
KbdÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ 1.12
oprofileÂÂÂÂÂÂÂÂÂÂÂÂÂÂ 0.9.2
Sh-utilsÂÂÂÂÂÂÂÂÂÂÂÂÂÂ 5.97
udevÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ 095
wireless-toolsÂÂÂÂÂÂÂÂ 28
Modules LoadedÂÂÂÂÂÂÂÂ ndiswrapper bridge vboxnetflt vboxdrv hidp l2cap
bluetooth configfs sunrpc ip_conntrack_netbios_ns ipt_MASQUERADE iptable_nat
ip_nat ipt_LOG ipt_REJECT xt_state ip_conntrack nfnetlink xt_multiport
iptable_filter ip_tables ip6t_REJECT xt_tcpudp ip6table_filter ip6_tables
x_tables ipv6 cpufreq_ondemand dm_mirror dm_multipath dm_mod video sbs backlight
i2c_ec button battery asus_acpi ac parport_pc lp parport snd_hda_intel
snd_hda_codec snd_seq_dummy snd_seq_oss joydev snd_seq_midi_event snd_seq
snd_seq_device snd_pcm_oss snd_mixer_oss sg snd_pcm ide_cd b44 cdrom snd_timer
snd i2c_piix4 mii k8_edac i2c_core k8temp edac_mc soundcore hwmon serio_raw
sdhci mmc_core snd_page_alloc ahci libata sd_mod scsi_mod ext3 jbd ehci_hcd
ohci_hcd uhci_hcd

Â
[8.2.] Processor information (from /proc/cpuinfo):
processorÂÂÂÂÂÂ : 0
vendor_idÂÂÂÂÂÂ : AuthenticAMD
cpu familyÂÂÂÂÂ : 15
modelÂÂÂÂÂÂÂÂÂÂ : 104
model nameÂÂÂÂÂ : AMD Turion(tm) 64 X2 Mobile Technology TL-60
steppingÂÂÂÂÂÂÂ : 2
cpu MHzÂÂÂÂÂÂÂÂ : 800.000
cache sizeÂÂÂÂÂ : 512 KB
physical idÂÂÂÂ : 0
siblingsÂÂÂÂÂÂÂ : 2
core idÂÂÂÂÂÂÂÂ : 0
cpu coresÂÂÂÂÂÂ : 2
fdiv_bugÂÂÂÂÂÂÂ : no
hlt_bugÂÂÂÂÂÂÂÂ : no
f00f_bugÂÂÂÂÂÂÂ : no
coma_bugÂÂÂÂÂÂÂ : no
fpuÂÂÂÂÂÂÂÂÂÂÂÂ : yes
fpu_exceptionÂÂ : yes
cpuid levelÂÂÂÂ : 1
wpÂÂÂÂÂÂÂÂÂÂÂÂÂ : yes
flagsÂÂÂÂÂÂÂÂÂÂ : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm
3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm extapic cr8legacy 3dnowprefetch
ts fid vid ttp tm stc 100mhzsteps
bogomipsÂÂÂÂÂÂÂ : 1601.16

processorÂÂÂÂÂÂ : 1
vendor_idÂÂÂÂÂÂ : AuthenticAMD
cpu familyÂÂÂÂÂ : 15
modelÂÂÂÂÂÂÂÂÂÂ : 104
model nameÂÂÂÂÂ : AMD Turion(tm) 64 X2 Mobile Technology TL-60
steppingÂÂÂÂÂÂÂ : 2
cpu MHzÂÂÂÂÂÂÂÂ : 800.000
cache sizeÂÂÂÂÂ : 512 KB
physical idÂÂÂÂ : 0
siblingsÂÂÂÂÂÂÂ : 2
core idÂÂÂÂÂÂÂÂ : 1
cpu coresÂÂÂÂÂÂ : 2
fdiv_bugÂÂÂÂÂÂÂ : no
hlt_bugÂÂÂÂÂÂÂÂ : no
f00f_bugÂÂÂÂÂÂÂ : no
coma_bugÂÂÂÂÂÂÂ : no
fpuÂÂÂÂÂÂÂÂÂÂÂÂ : yes
fpu_exceptionÂÂ : yes
cpuid levelÂÂÂÂ : 1
wpÂÂÂÂÂÂÂÂÂÂÂÂÂ : yes
flagsÂÂÂÂÂÂÂÂÂÂ : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm
3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm extapic cr8legacy 3dnowprefetch
ts fid vid ttp tm stc 100mhzsteps
bogomipsÂÂÂÂÂÂÂ : 1601.16

[8.3.] Module information (from /proc/modules):
Â
ndiswrapper 169360 0 - Live 0xf9023000
bridge 53341 0 - Live 0xf8d9b000
vboxnetflt 79400 0 - Live 0xf8d86000
vboxdrv 103208 1 vboxnetflt, Live 0xf8d6b000
hidp 23105 2 - Live 0xf8d0d000
l2cap 29633 5 hidp, Live 0xf8d04000
bluetooth 53925 2 hidp,l2cap, Live 0xf8d3e000
configfs 28753 1 - Live 0xf8cfb000
sunrpc 144253 1 - Live 0xf8d19000
ip_conntrack_netbios_ns 6977 0 - Live 0xf8c84000
ipt_MASQUERADE 7745 3 - Live 0xf8c72000
iptable_nat 11205 1 - Live 0xf8ced000
ip_nat 20973 2 ipt_MASQUERADE,iptable_nat, Live 0xf8cd5000
ipt_LOG 10177 1 - Live 0xf8c78000
ipt_REJECT 9537 8 - Live 0xf8c7c000
xt_state 6209 7 - Live 0xf8c75000
ip_conntrack 53025 5
ip_conntrack_netbios_ns,ipt_MASQUERADE,iptable_nat,ip_nat,xt_state, Live
0xf8cc7000
nfnetlink 10713 2 ip_nat,ip_conntrack, Live 0xf8c51000
xt_multiport 7233 1 - Live 0xf8c5f000
iptable_filter 7105 1 - Live 0xf8c5c000
ip_tables 17029 2 iptable_nat,iptable_filter, Live 0xf8c62000
ip6t_REJECT 9409 1 - Live 0xf8c58000
xt_tcpudp 7105 53 - Live 0xf8c55000
ip6table_filter 6849 1 - Live 0xf8c3e000
ip6_tables 18181 1 ip6table_filter, Live 0xf8c4b000
x_tables 17349 10
ipt_MASQUERADE,iptable_nat,ipt_LOG,ipt_REJECT,xt_state,xt_multiport,ip_tables,ip
6t_REJECT,xt_tcpudp,ip6_tables, Live 0xf8c45000
ipv6 251393 21 ip6t_REJECT, Live 0xf8c88000
cpufreq_ondemand 10573 1 - Live 0xf8a35000
dm_mirror 28869 0 - Live 0xf8a3a000
dm_multipath 21577 0 - Live 0xf89ee000
dm_mod 58457 2 dm_mirror,dm_multipath, Live 0xf8a43000
video 19269 0 - Live 0xf89f5000
sbs 18533 0 - Live 0xf89c2000
backlight 10049 0 - Live 0xf89ea000
i2c_ec 9025 1 sbs, Live 0xf89e6000
button 10705 0 - Live 0xf89e2000
battery 13637 0 - Live 0xf89c8000
asus_acpi 19289 0 - Live 0xf896c000
ac 9157 0 - Live 0xf8995000
parport_pc 29157 0 - Live 0xf89d9000
lp 15849 0 - Live 0xf89ad000
parport 37513 2 parport_pc,lp, Live 0xf89ce000
snd_hda_intel 24025 0 - Live 0xf89bb000
snd_hda_codec 202689 1 snd_hda_intel, Live 0xf89fd000
snd_seq_dummy 7877 0 - Live 0xf8992000
snd_seq_oss 32577 0 - Live 0xf89b2000
joydev 13313 0 - Live 0xf898d000
snd_seq_midi_event 11073 1 snd_seq_oss, Live 0xf8989000
snd_seq 49713 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event, Live 0xf8999000
snd_seq_device 11725 3 snd_seq_dummy,snd_seq_oss,snd_seq, Live 0xf8985000
snd_pcm_oss 42945 0 - Live 0xf893b000
snd_mixer_oss 19009 1 snd_pcm_oss, Live 0xf8966000
sg 35933 0 - Live 0xf895c000
snd_pcm 72133 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss, Live 0xf8972000
ide_cd 40033 0 - Live 0xf8951000
b44 29133 0 - Live 0xf891c000
cdrom 36705 1 ide_cd, Live 0xf8947000
snd_timer 24645 2 snd_seq,snd_pcm, Live 0xf8925000
snd 52421 9
snd_hda_intel,snd_hda_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_m
ixer_oss,snd_pcm,snd_timer, Live 0xf892d000
i2c_piix4 12237 0 - Live 0xf8902000
mii 9409 1 b44, Live 0xf88fe000
k8_edac 18177 0 - Live 0xf8916000
i2c_core 23745 2 i2c_ec,i2c_piix4, Live 0xf890f000
k8temp 9537 0 - Live 0xf88db000
edac_mc 24977 1 k8_edac, Live 0xf8907000
soundcore 11553 1 snd, Live 0xf88d7000
hwmon 7365 1 k8temp, Live 0xf88d4000
serio_raw 10693 0 - Live 0xf88c8000
sdhci 21337 0 - Live 0xf8846000
mmc_core 27457 1 sdhci, Live 0xf88cc000
snd_page_alloc 13769 2 snd_hda_intel,snd_pcm, Live 0xf88be000
ahci 23621 2 - Live 0xf885f000
libata 115961 1 ahci, Live 0xf88e0000
sd_mod 24897 3 - Live 0xf8857000
scsi_mod 132685 3 sg,libata,sd_mod, Live 0xf8879000
ext3 123337 1 - Live 0xf889e000
jbd 56553 1 ext3, Live 0xf886a000
ehci_hcd 33229 0 - Live 0xf884d000
ohci_hcd 23389 0 - Live 0xf8837000
uhci_hcd 25549 0 - Live 0xf882f000

Â
[8.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
0220-022f : pnp 00:08
03c0-03df : vga+
03f6-03f6 : ide0
1080-1080 : motherboard
 1080-1080 : pnp 00:08
8000-805f : motherboard
 8000-8003 : ACPI PM1a_EVT_BLK
 8004-8005 : ACPI PM1a_CNT_BLK
 8008-800b : ACPI PM_TMR
 8010-8015 : ACPI CPU throttle
 8020-8027 : ACPI GPE0_BLK
8200-8200 : ACPI PM2_CNT_BLK
8204-8207 : ACPI PM1b_EVT_BLK
8400-840f : 0000:00:12.0
8410-841f : 0000:00:14.0
 8410-8417 : piix4_smbus
8420-842f : 0000:00:14.1
 8420-8427 : ide0
8430-8437 : 0000:00:12.0
8438-843f : 0000:00:12.0
8450-8453 : 0000:00:12.0
8454-8457 : 0000:00:12.0
9000-9fff : PCI Bus #01
 9000-90ff : 0000:01:05.0
################################
00000000-0009dbff : System RAM
 00000000-00000000 : Crash kernel
0009dc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000ccfff : Video ROM
000cd000-000cdfff : Adapter ROM
000f0000-000fffff : System ROM
00100000-a7e6ffff : System RAM
 00400000-006075e0 : Kernel code
 006075e1-006de9bb : Kernel data
a7e70000-a7e7ffff : ACPI Tables
a7e80000-a7efffff : ACPI Non-volatile Storage
a7f00000-afffffff : reserved
c0000000-c0003fff : 0000:00:14.2
 c0000000-c0003fff : ICH HD audio
c0004000-c00043ff : 0000:00:12.0
 c0004000-c00043ff : ahci
c0004400-c00044ff : 0000:00:13.5
 c0004400-c00044ff : ehci_hcd
c0005000-c0005fff : 0000:00:13.0
 c0005000-c0005fff : ohci_hcd
c0006000-c0006fff : 0000:00:13.1
 c0006000-c0006fff : ohci_hcd
c0007000-c0007fff : 0000:00:13.2
 c0007000-c0007fff : ohci_hcd
c0008000-c0008fff : 0000:00:13.3
 c0008000-c0008fff : ohci_hcd
c0009000-c0009fff : 0000:00:13.4
 c0009000-c0009fff : ohci_hcd
c0100000-c01fffff : PCI Bus #01
 c0100000-c010ffff : 0000:01:05.0
 c0120000-c013ffff : 0000:01:05.0
c0200000-c02fffff : PCI Bus #05
 c0200000-c0203fff : 0000:05:00.0
ÂÂÂ c0200000-c0203fff : ndiswrapper
c0300000-c03fffff : PCI Bus #08
 c0300000-c0301fff : 0000:08:00.0
ÂÂÂ c0300000-c0301fff : b44
 c0302800-c03028ff : 0000:08:01.0
ÂÂÂ c0302800-c03028ff : sdhci:slot0
 c0302c00-c0302cff : 0000:08:01.1
c8000000-cfffffff : PCI Bus #01
 c8000000-cfffffff : 0000:01:05.0
e0000000-efffffff : reserved
fec00000-fec0ffff : reserved
fed00000-fed003ff : 0000:00:14.0
fee00000-fee00fff : reserved
fff80000-ffffffff : reserved
100000000-14fffffff : System RAM

Â
Â
[8.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10)
ÂÂÂÂÂÂÂ Subsystem: Dell Unknown device 022a
ÂÂÂÂÂÂÂ Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
ÂÂÂÂÂÂÂ Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort+ <MAbort+ >SERR- <PERR-
ÂÂÂÂÂÂÂ Latency: 64

00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal
decode])
ÂÂÂÂÂÂÂ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
ÂÂÂÂÂÂÂ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
ÂÂÂÂÂÂÂ Latency: 64
ÂÂÂÂÂÂÂ Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
ÂÂÂÂÂÂÂ I/O behind bridge: 00009000-00009fff
ÂÂÂÂÂÂÂ Memory behind bridge: c0100000-c01fffff
ÂÂÂÂÂÂÂ Prefetchable memory behind bridge: 00000000c8000000-00000000cff00000
ÂÂÂÂÂÂÂ Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
ÂÂÂÂÂÂÂ BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
ÂÂÂÂÂÂÂ Capabilities: [44] HyperTransport: MSI Mapping
ÂÂÂÂÂÂÂ Capabilities: [b0] #0d [0000]

00:05.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal
decode])
ÂÂÂÂÂÂÂ Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
ÂÂÂÂÂÂÂ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
ÂÂÂÂÂÂÂ Latency: 0, Cache Line Size: 32 bytes
ÂÂÂÂÂÂÂ Bus: primary=00, secondary=02, subordinate=04, sec-latency=0
ÂÂÂÂÂÂÂ I/O behind bridge: 0000f000-00000fff
ÂÂÂÂÂÂÂ Memory behind bridge: fff00000-000fffff
ÂÂÂÂÂÂÂ Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
ÂÂÂÂÂÂÂ Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
ÂÂÂÂÂÂÂ BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
ÂÂÂÂÂÂÂ Capabilities: [50] Power Management version 3
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
ÂÂÂÂÂÂÂ Capabilities: [58] Express Root Port (Slot+) IRQ 0
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Device: Latency L0s <64ns, L1 <1us
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 247
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Link: Latency L0s <64ns, L1 <1us
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Link: Speed 2.5Gb/s, Width x16
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Slot: Number 0, PowerLimit 0.000000
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Slot: AttnInd Off, PwrInd Off, Power-
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Root: Correctable- Non-Fatal- Fatal- PME-
ÂÂÂÂÂÂÂ Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Address: 00000000Â Data: 0000
ÂÂÂÂÂÂÂ Capabilities: [b0] #0d [0000]
ÂÂÂÂÂÂÂ Capabilities: [b8] HyperTransport: MSI Mapping

00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal
decode])
ÂÂÂÂÂÂÂ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
ÂÂÂÂÂÂÂ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
ÂÂÂÂÂÂÂ Latency: 0, Cache Line Size: 32 bytes
ÂÂÂÂÂÂÂ Bus: primary=00, secondary=05, subordinate=07, sec-latency=0
ÂÂÂÂÂÂÂ I/O behind bridge: 0000f000-00000fff
ÂÂÂÂÂÂÂ Memory behind bridge: c0200000-c02fffff
ÂÂÂÂÂÂÂ Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
ÂÂÂÂÂÂÂ Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
ÂÂÂÂÂÂÂ BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
ÂÂÂÂÂÂÂ Capabilities: [50] Power Management version 3
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
ÂÂÂÂÂÂÂ Capabilities: [58] Express Root Port (Slot+) IRQ 0
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Device: Latency L0s <64ns, L1 <1us
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 3
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Link: Latency L0s <64ns, L1 <1us
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Link: Speed 2.5Gb/s, Width x1
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Slot: Number 0, PowerLimit 25.000000
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Slot: AttnInd Off, PwrInd Off, Power-
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Root: Correctable- Non-Fatal- Fatal- PME-
ÂÂÂÂÂÂÂ Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Address: 00000000Â Data: 0000
ÂÂÂÂÂÂÂ Capabilities: [b0] #0d [0000]
ÂÂÂÂÂÂÂ Capabilities: [b8] HyperTransport: MSI Mapping

00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA (prog-if 01
[AHCI 1.0])
ÂÂÂÂÂÂÂ Subsystem: Dell Unknown device 022a
ÂÂÂÂÂÂÂ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
ÂÂÂÂÂÂÂ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort+
<TAbort- <MAbort- >SERR- <PERR-
ÂÂÂÂÂÂÂ Latency: 64
ÂÂÂÂÂÂÂ Interrupt: pin A routed to IRQ 209
ÂÂÂÂÂÂÂ Region 0: I/O ports at 8438 [size=8]
ÂÂÂÂÂÂÂ Region 1: I/O ports at 8454 [size=4]
ÂÂÂÂÂÂÂ Region 2: I/O ports at 8430 [size=8]
ÂÂÂÂÂÂÂ Region 3: I/O ports at 8450 [size=4]
ÂÂÂÂÂÂÂ Region 4: I/O ports at 8400 [size=16]
ÂÂÂÂÂÂÂ Region 5: Memory at c0004000 (32-bit, non-prefetchable) [size=1K]
ÂÂÂÂÂÂÂ Capabilities: [60] Power Management version 2
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0) (prog-if 10
[OHCI])
ÂÂÂÂÂÂÂ Subsystem: Dell Unknown device 022a
ÂÂÂÂÂÂÂ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
ÂÂÂÂÂÂÂ Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
ÂÂÂÂÂÂÂ Latency: 64, Cache Line Size: 32 bytes
ÂÂÂÂÂÂÂ Interrupt: pin A routed to IRQ 177
ÂÂÂÂÂÂÂ Region 0: Memory at c0005000 (32-bit, non-prefetchable) [size=4K]

00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1) (prog-if 10
[OHCI])
ÂÂÂÂÂÂÂ Subsystem: Dell Unknown device 022a
ÂÂÂÂÂÂÂ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
ÂÂÂÂÂÂÂ Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
ÂÂÂÂÂÂÂ Latency: 64, Cache Line Size: 32 bytes
ÂÂÂÂÂÂÂ Interrupt: pin B routed to IRQ 185
ÂÂÂÂÂÂÂ Region 0: Memory at c0006000 (32-bit, non-prefetchable) [size=4K]

00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2) (prog-if 10
[OHCI])
ÂÂÂÂÂÂÂ Subsystem: Dell Unknown device 022a
ÂÂÂÂÂÂÂ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
ÂÂÂÂÂÂÂ Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
ÂÂÂÂÂÂÂ Latency: 64, Cache Line Size: 32 bytes
ÂÂÂÂÂÂÂ Interrupt: pin C routed to IRQ 193
ÂÂÂÂÂÂÂ Region 0: Memory at c0007000 (32-bit, non-prefetchable) [size=4K]

00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3) (prog-if 10
[OHCI])
ÂÂÂÂÂÂÂ Subsystem: Dell Unknown device 022a
ÂÂÂÂÂÂÂ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
ÂÂÂÂÂÂÂ Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
ÂÂÂÂÂÂÂ Latency: 64, Cache Line Size: 32 bytes
ÂÂÂÂÂÂÂ Interrupt: pin B routed to IRQ 185
ÂÂÂÂÂÂÂ Region 0: Memory at c0008000 (32-bit, non-prefetchable) [size=4K]

00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4) (prog-if 10
[OHCI])
ÂÂÂÂÂÂÂ Subsystem: Dell Unknown device 022a
ÂÂÂÂÂÂÂ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
ÂÂÂÂÂÂÂ Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
ÂÂÂÂÂÂÂ Latency: 64, Cache Line Size: 32 bytes
ÂÂÂÂÂÂÂ Interrupt: pin C routed to IRQ 193
ÂÂÂÂÂÂÂ Region 0: Memory at c0009000 (32-bit, non-prefetchable) [size=4K]

00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI)
(prog-if 20 [EHCI])
ÂÂÂÂÂÂÂ Subsystem: Dell Unknown device 022a
ÂÂÂÂÂÂÂ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
ÂÂÂÂÂÂÂ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
ÂÂÂÂÂÂÂ Latency: 64, Cache Line Size: 64 bytes
ÂÂÂÂÂÂÂ Interrupt: pin D routed to IRQ 201
ÂÂÂÂÂÂÂ Region 0: Memory at c0004400 (32-bit, non-prefetchable) [size=256]
ÂÂÂÂÂÂÂ Capabilities: [c0] Power Management version 2
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Bridge: PM- B3+
ÂÂÂÂÂÂÂ Capabilities: [e4] Debug port

00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14)
ÂÂÂÂÂÂÂ Subsystem: Dell Unknown device 022a
ÂÂÂÂÂÂÂ Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
ÂÂÂÂÂÂÂ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
ÂÂÂÂÂÂÂ Region 0: I/O ports at 8410 [size=16]
ÂÂÂÂÂÂÂ Region 1: Memory at fed00000 (32-bit, non-prefetchable) [size=1K]
ÂÂÂÂÂÂÂ Capabilities: [b0] HyperTransport: MSI Mapping

00:14.1 IDE interface: ATI Technologies Inc SB600 IDE (prog-if 8a [Master SecP
PriP])
ÂÂÂÂÂÂÂ Subsystem: Dell Unknown device 022a
ÂÂÂÂÂÂÂ Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
ÂÂÂÂÂÂÂ Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
ÂÂÂÂÂÂÂ Latency: 0
ÂÂÂÂÂÂÂ Interrupt: pin A routed to IRQ 177
ÂÂÂÂÂÂÂ Region 0: I/O ports at <ignored>
ÂÂÂÂÂÂÂ Region 1: I/O ports at <ignored>
ÂÂÂÂÂÂÂ Region 2: I/O ports at <unassigned>
ÂÂÂÂÂÂÂ Region 3: I/O ports at <unassigned>
ÂÂÂÂÂÂÂ Region 4: I/O ports at 8420 [size=16]

00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia
ÂÂÂÂÂÂÂ Subsystem: Dell Unknown device 022a
ÂÂÂÂÂÂÂ Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
ÂÂÂÂÂÂÂ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
ÂÂÂÂÂÂÂ Latency: 64, Cache Line Size: 32 bytes
ÂÂÂÂÂÂÂ Interrupt: pin ? routed to IRQ 177
ÂÂÂÂÂÂÂ Region 0: Memory at c0000000 (64-bit, non-prefetchable) [size=16K]
ÂÂÂÂÂÂÂ Capabilities: [50] Power Management version 2
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
ÂÂÂÂÂÂÂ Subsystem: Dell Unknown device 022a
ÂÂÂÂÂÂÂ Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
ÂÂÂÂÂÂÂ Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
ÂÂÂÂÂÂÂ Latency: 0

00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (prog-if 01
[Subtractive decode])
ÂÂÂÂÂÂÂ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
ÂÂÂÂÂÂÂ Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
ÂÂÂÂÂÂÂ Latency: 64
ÂÂÂÂÂÂÂ Bus: primary=00, secondary=08, subordinate=0a, sec-latency=64
ÂÂÂÂÂÂÂ I/O behind bridge: 0000f000-00000fff
ÂÂÂÂÂÂÂ Memory behind bridge: c0300000-c03fffff
ÂÂÂÂÂÂÂ Prefetchable memory behind bridge: fff00000-000fffff
ÂÂÂÂÂÂÂ Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
ÂÂÂÂÂÂÂ BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
ÂÂÂÂÂÂÂ Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
ÂÂÂÂÂÂÂ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
ÂÂÂÂÂÂÂ Capabilities: [80] HyperTransport: Host or Secondary Interface
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ !!! Possibly incomplete decoding
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Command: WarmRst+ DblEnd-
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=8
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Revision ID: 1.02

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address
Map
ÂÂÂÂÂÂÂ Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
ÂÂÂÂÂÂÂ Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM
Controller
ÂÂÂÂÂÂÂ Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
ÂÂÂÂÂÂÂ Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
ÂÂÂÂÂÂÂ Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
ÂÂÂÂÂÂÂ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
ÂÂÂÂÂÂÂ Capabilities: [f0] #0f [0010]

01:05.0 VGA compatible controller: ATI Technologies Inc RS482 [Radeon Xpress
200] (prog-if 00 [VGA])
ÂÂÂÂÂÂÂ Subsystem: Dell Unknown device 022a
ÂÂÂÂÂÂÂ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
ÂÂÂÂÂÂÂ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
ÂÂÂÂÂÂÂ Latency: 255 (2000ns min), Cache Line Size: 32 bytes
ÂÂÂÂÂÂÂ Interrupt: pin A routed to IRQ 10
ÂÂÂÂÂÂÂ Region 0: Memory at c8000000 (32-bit, prefetchable) [size=128M]
ÂÂÂÂÂÂÂ Region 1: I/O ports at 9000 [size=256]
ÂÂÂÂÂÂÂ Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
ÂÂÂÂÂÂÂ [virtual] Expansion ROM at c0120000 [disabled] [size=128K]
ÂÂÂÂÂÂÂ Capabilities: [50] Power Management version 2
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Status: D0 PME-Enable- DSel=0 DScale=0 PME-

05:00.0 Network controller: Broadcom Corporation BCM94311MCG wlan mini-PCI (rev
01)
ÂÂÂÂÂÂÂ Subsystem: Dell Unknown device 0007
ÂÂÂÂÂÂÂ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
ÂÂÂÂÂÂÂ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
ÂÂÂÂÂÂÂ Latency: 0, Cache Line Size: 32 bytes
ÂÂÂÂÂÂÂ Interrupt: pin A routed to IRQ 193
ÂÂÂÂÂÂÂ Region 0: Memory at c0200000 (32-bit, non-prefetchable) [size=16K]
ÂÂÂÂÂÂÂ Capabilities: [40] Power Management version 2
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Status: D0 PME-Enable- DSel=0 DScale=2 PME-
ÂÂÂÂÂÂÂ Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Address: 00000000Â Data: 0000
ÂÂÂÂÂÂÂ Capabilities: [d0] Express Legacy Endpoint IRQ 0
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Device: Latency L0s <4us, L1 unlimited
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Device: AtnBtn- AtnInd- PwrInd-
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Link: Latency L0s <4us, L1 <64us
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Link: Speed 2.5Gb/s, Width x1
ÂÂÂÂÂÂÂ Capabilities: [100] Advanced Error Reporting
ÂÂÂÂÂÂÂ Capabilities: [13c] Virtual Channel

08:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
ÂÂÂÂÂÂÂ Subsystem: Dell Unknown device 022a
ÂÂÂÂÂÂÂ Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
ÂÂÂÂÂÂÂ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
ÂÂÂÂÂÂÂ Latency: 64
ÂÂÂÂÂÂÂ Interrupt: pin A routed to IRQ 225
ÂÂÂÂÂÂÂ Region 0: Memory at c0300000 (32-bit, non-prefetchable) [size=8K]
ÂÂÂÂÂÂÂ Capabilities: [40] Power Management version 2
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Status: D0 PME-Enable- DSel=0 DScale=2 PME-

08:01.0 Class 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev
22)
ÂÂÂÂÂÂÂ Subsystem: Dell Unknown device 022a
ÂÂÂÂÂÂÂ Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
ÂÂÂÂÂÂÂ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
ÂÂÂÂÂÂÂ Latency: 64, Cache Line Size: 32 bytes
ÂÂÂÂÂÂÂ Interrupt: pin B routed to IRQ 217
ÂÂÂÂÂÂÂ Region 0: Memory at c0302800 (32-bit, non-prefetchable) [size=256]
ÂÂÂÂÂÂÂ Capabilities: [80] Power Management version 2
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Status: D0 PME-Enable- DSel=0 DScale=2 PME-

08:01.1 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
ÂÂÂÂÂÂÂ Subsystem: Dell Unknown device 022a
ÂÂÂÂÂÂÂ Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
ÂÂÂÂÂÂÂ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
ÂÂÂÂÂÂÂ Latency: 64, Cache Line Size: 32 bytes
ÂÂÂÂÂÂÂ Interrupt: pin B routed to IRQ 9
ÂÂÂÂÂÂÂ Region 0: Memory at c0302c00 (32-bit, non-prefetchable) [size=256]
ÂÂÂÂÂÂÂ Capabilities: [80] Power Management version 2
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Status: D0 PME-Enable- DSel=0 DScale=2 PME-


[8.6.] SCSI information (from /proc/scsi/scsi)
Â
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
 Vendor: ATA Model: FUJITSU MHY2160B Rev: 0085
 Type: Direct-Access ANSI SCSI revision: 05

[8.7.] Other information that might be relevant to the problem
ÂÂÂÂÂÂ (please look in /proc and include all information that you
ÂÂÂÂÂÂ think to be relevant):
[X.] Other notes, patches, fixes, workarounds:Hello
Â

Â
Â
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/