Re: 2.6.33-rc6, swapper - not tainted

From: Rafael J. Wysocki
Date: Sat Jan 30 2010 - 15:00:57 EST

Next message: tip-bot for Leann Ogasawara: "[tip:x86/urgent] x86: Add Dell OptiPlex 760 reboot quirk"
Previous message: Michael Breuer: "Re: Regressionhung task during raid rebuild 2.6.33 rc5 was: Re:2.6.33RC3 hung task - jbd2/dm-1-8 (during raid rebuild)"
In reply to: Heinz Diehl: "Re: 2.6.33-rc6, swapper - not tainted"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Saturday 30 January 2010, Heinz Diehl wrote:
> On 30.01.2010, Rafael J. Wysocki wrote:
>
> > It looks like you cut too much from the log. Can you please attach
> > the entire log?
>
> Yes, of course:
>
> Inspecting /boot/System.map-2.6.33-rc6
> Cannot find map file.
> No module symbols loaded - kernel modules not enabled.
>
> Cannot build symbol table - disabling symbol lookups
> klogd 1.4.1, log source = ksyslog started.
> <5>Linux version 2.6.33-rc6 (root@liesel) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (pclinux) ) #1 SMP PREEMPT Sat Jan 30 11:24:10 CET 2010
> <6>Command line: root=/dev/mapper/root luks_root=/dev/sda3 luks="root" resume=/dev/mapper/swap splash=silent vga=0x31a clocksource=hpet pci=use_crs
> <6>BIOS-provided physical RAM map:
> <6> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> <6> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> <6> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> <6> BIOS-e820: 0000000000100000 - 00000000cfde0000 (usable)
> <6> BIOS-e820: 00000000cfde0000 - 00000000cfde3000 (ACPI NVS)
> <6> BIOS-e820: 00000000cfde3000 - 00000000cfdf0000 (ACPI data)
> <6> BIOS-e820: 00000000cfdf0000 - 00000000cfe00000 (reserved)
> <6> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> <6> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> <6> BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
> <6>NX (Execute Disable) protection: active
> <6>DMI 2.4 present.
> <6>No AGP bridge found
> <6>last_pfn = 0x230000 max_arch_pfn = 0x400000000
> <7>MTRR default type: uncachable
> <7>MTRR fixed ranges enabled:
> <7> 00000-9FFFF write-back
> <7> A0000-BFFFF uncachable
> <7> C0000-C7FFF write-protect
> <7> C8000-FFFFF uncachable
> <7>MTRR variable ranges enabled:
> <7> 0 base 000000000000 mask FFFF80000000 write-back
> <7> 1 base 000080000000 mask FFFFC0000000 write-back
> <7> 2 base 0000C0000000 mask FFFFF0000000 write-back
> <7> 3 base 0000CFE00000 mask FFFFFFE00000 uncachable
> <7> 4 base 000100000000 mask FFFF00000000 write-back
> <7> 5 base 000200000000 mask FFFFE0000000 write-back
> <7> 6 base 000220000000 mask FFFFF0000000 write-back
> <7> 7 disabled
> <7>TOM2: 0000000230000000 aka 8960M
> <6>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> <7>e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved)
> <6>last_pfn = 0xcfde0 max_arch_pfn = 0x400000000
> <7>initial memory mapped : 0 - 20000000
> <6>Using GB pages for direct mapping
> <6>init_memory_mapping: 0000000000000000-00000000cfde0000
> <7> 0000000000 - 00c0000000 page 1G
> <7> 00c0000000 - 00cfc00000 page 2M
> <7> 00cfc00000 - 00cfde0000 page 4k
> <7>kernel direct mapping tables up to cfde0000 @ 8000-b000
> <6>init_memory_mapping: 0000000100000000-0000000230000000
> <7> 0100000000 - 0200000000 page 1G
> <7> 0200000000 - 0230000000 page 2M
> <7>kernel direct mapping tables up to 230000000 @ a000-c000
> <6>RAMDISK: 37a10000 - 37fef537
> <4>ACPI: RSDP 00000000000f6e30 00014 (v00 GBT )
> <4>ACPI: RSDT 00000000cfde3000 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
> <4>ACPI: FACP 00000000cfde3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
> <4>ACPI: DSDT 00000000cfde30c0 05E2B (v01 GBT GBTUACPI 00001000 MSFT 03000000)
> <4>ACPI: FACS 00000000cfde0000 00040
> <4>ACPI: SSDT 00000000cfde8fc0 0088C (v01 PTLTD POWERNOW 00000001 LTP 00000001)
> <4>ACPI: HPET 00000000cfde9880 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
> <4>ACPI: MCFG 00000000cfde98c0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
> <4>ACPI: TAMG 00000000cfde9900 00302 (v01 GBT GBT B0 5455312E BG?? 53450101)
> <4>ACPI: APIC 00000000cfde8f00 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
> <7>ACPI: Local APIC address 0xfee00000
> <6>No NUMA configuration found
> <6>Faking a node at 0000000000000000-0000000230000000
> <6>Bootmem setup node 0 0000000000000000-0000000230000000
> <6> NODE_DATA [000000000000b000 - 000000000003efff]
> <6> bootmap [000000000003f000 - 0000000000084fff] pages 46
> <6>(9 early reservations) ==> bootmem [0000000000 - 0230000000]
> <6> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
> <6> #1 [0001000000 - 0005dca844] TEXT DATA BSS ==> [0001000000 - 0005dca844]
> <6> #2 [0037a10000 - 0037fef537] RAMDISK ==> [0037a10000 - 0037fef537]
> <6> #3 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
> <6> #4 [0005dcb000 - 0005dcb0fe] BRK ==> [0005dcb000 - 0005dcb0fe]
> <6> #5 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000]
> <6> #6 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000]
> <6> #7 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
> <6> #8 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000]
> <7> [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880028600000-ffff88002f7fffff] on node 0
> <4>Zone PFN ranges:
> <4> DMA 0x00000000 -> 0x00001000
> <4> DMA32 0x00001000 -> 0x00100000
> <4> Normal 0x00100000 -> 0x00230000
> <4>Movable zone start PFN for each node
> <4>early_node_map[3] active PFN ranges
> <4> 0: 0x00000000 -> 0x0000009f
> <4> 0: 0x00000100 -> 0x000cfde0
> <4> 0: 0x00100000 -> 0x00230000
> <7>On node 0 totalpages: 2096511
> <7> DMA zone: 56 pages used for memmap
> <7> DMA zone: 106 pages reserved
> <7> DMA zone: 3837 pages, LIFO batch:0
> <7> DMA32 zone: 14280 pages used for memmap
> <7> DMA32 zone: 833048 pages, LIFO batch:31
> <7> Normal zone: 17024 pages used for memmap
> <7> Normal zone: 1228160 pages, LIFO batch:31
> <6>ACPI: PM-Timer IO Port: 0x4008
> <7>ACPI: Local APIC address 0xfee00000
> <6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> <6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> <6>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
> <6>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
> <6>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
> <6>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
> <6>ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
> <6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> <6>IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
> <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> <7>ACPI: IRQ0 used by override.
> <7>ACPI: IRQ2 used by override.
> <7>ACPI: IRQ9 used by override.
> <6>Using ACPI (MADT) for SMP configuration information
> <6>ACPI: HPET id: 0x10b9a201 base: 0xfed00000
> <6>SMP: Allowing 4 CPUs, 0 hotplug CPUs
> <7>nr_irqs_gsi: 24
> <6>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
> <6>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
> <6>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
> <6>PM: Registered nosave memory: 00000000cfde0000 - 00000000cfde3000
> <6>PM: Registered nosave memory: 00000000cfde3000 - 00000000cfdf0000
> <6>PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfe00000
> <6>PM: Registered nosave memory: 00000000cfe00000 - 00000000e0000000
> <6>PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
> <6>PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
> <6>PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
> <6>Allocating PCI resources starting at cfe00000 (gap: cfe00000:10200000)
> <6>setup_percpu: NR_CPUS:4096 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
> <6>PERCPU: Embedded 27 pages/cpu @ffff880028200000 s79384 r8192 d23016 u524288
> <6>pcpu-alloc: s79384 r8192 d23016 u524288 alloc=1*2097152
> <6>pcpu-alloc: [0] 0 1 2 3
> <4>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065045
> <4>Policy zone: Normal
> <5>Kernel command line: root=/dev/mapper/root luks_root=/dev/sda3 luks="root" resume=/dev/mapper/swap splash=silent vga=0x31a clocksource=hpet pci=use_crs
> <6>PID hash table entries: 4096 (order: 3, 32768 bytes)
> <6>Checking aperture...
> <6>No AGP bridge found
> <6>Node 0: aperture @ 20000000 size 32 MB
> <6>Aperture pointing to e820 RAM. Ignoring.
> <6>Your BIOS doesn't leave a aperture memory hole
> <6>Please enable the IOMMU option in the BIOS setup
> <6>This costs you 64 MB of RAM
> <6>Mapping aperture over 65536 KB of RAM @ 20000000
> <6>PM: Registered nosave memory: 0000000020000000 - 0000000024000000
> <6>Memory: 8051188k/9175040k available (4244k kernel code, 788996k absent, 334856k reserved, 3055k data, 1344k init)
> <6>Experimental preemptable hierarchical RCU implementation.
> <6>NR_IRQS:4352
> <4>Console: colour dummy device 80x25
> <6>console [tty0] enabled
> <7>hpet clockevent registered
> <4>Fast TSC calibration using PIT
> <4>Detected 2511.892 MHz processor.
> <6>Calibrating delay loop (skipped), value calculated using timer frequency.. 5023.77 BogoMIPS (lpj=2511889)
> <6>Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
> <6>Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
> <4>Mount-cache hash table entries: 256
> <7>tseg: 00cfe00000
> <6>CPU: Physical Processor ID: 0
> <6>CPU: Processor Core ID: 0
> <6>mce: CPU supports 6 MCE banks
> <6>using C1E aware idle routine
> <6>Performance Events: AMD PMU driver.
> <6>... version: 0
> <6>... bit width: 48
> <6>... generic registers: 4
> <6>... value mask: 0000ffffffffffff
> <6>... max period: 00007fffffffffff
> <6>... fixed-purpose events: 0
> <6>... event mask: 000000000000000f
> <6>ACPI: Core revision 20091214
> <6>Setting APIC routing to flat
> <6>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> <6>CPU0: AMD Phenom(tm) II X4 905e Processor stepping 02
> <6>Booting Node 0, Processors #1 #2 #3 Ok.
> <6>Brought up 4 CPUs
> <6>Total of 4 processors activated (20092.99 BogoMIPS).
> <6>NET: Registered protocol family 16
> <7>node 0 link 0: io port [c000, ffff]
> <6>TOM: 00000000d0000000 aka 3328M
> <7>Fam 10h mmconf [e0000000, e00fffff]
> <7>node 0 link 0: mmio [a0000, bffff]
> <7>node 0 link 0: mmio [d0000000, dfffffff]
> <7>node 0 link 0: mmio [f0000000, fe02ffff]
> <7>node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff]
> <6>TOM2: 0000000230000000 aka 8960M
> <7>bus: [00, 03] on node 0 link 0
> <7>bus: 00 index 0 io port: [0, ffff]
> <7>bus: 00 index 1 mmio: [a0000, bffff]
> <7>bus: 00 index 2 mmio: [d0000000, dfffffff]
> <7>bus: 00 index 3 mmio: [e0400000, ffffffff]
> <7>bus: 00 index 4 mmio: [e0100000, e03fffff]
> <7>bus: 00 index 5 mmio: [230000000, fcffffffff]
> <6>ACPI: bus type pci registered
> <6>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
> <6>PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
> <6>PCI: Using configuration type 1 for base access
> <4>bio: create slab <bio-0> at 0
> <7>ACPI: EC: Look up EC in DSDT
> <6>ACPI: Interpreter enabled
> <6>ACPI: (supports S0 S1 S4 S5)
> <6>ACPI: Using IOAPIC for interrupt routing
> <6>ACPI: No dock devices found.
> <6>ACPI: PCI Root Bridge [PCI0] (0000:00)
> <6>pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
> <6>pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
> <6>pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
> <6>pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
> <6>pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xfed0ffff]
> <7>pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
> <7>pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
> <7>pci 0000:00:02.0: PME# disabled
> <7>pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
> <7>pci 0000:00:0a.0: PME# disabled
> <7>pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
> <7>pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
> <7>pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
> <7>pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
> <7>pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
> <7>pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
> <7>pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
> <7>pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
> <7>pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
> <7>pci 0000:00:12.2: supports D1 D2
> <7>pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
> <7>pci 0000:00:12.2: PME# disabled
> <7>pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
> <7>pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
> <7>pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
> <7>pci 0000:00:13.2: supports D1 D2
> <7>pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
> <7>pci 0000:00:13.2: PME# disabled
> <7>pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
> <7>pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
> <7>pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
> <7>pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
> <7>pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
> <7>pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
> <7>pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
> <7>pci 0000:00:14.2: PME# disabled
> <7>pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
> <7>pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
> <7>pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
> <7>pci 0000:01:00.0: reg 1c: [mem 0xfb000000-0xfbffffff 64bit]
> <7>pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f]
> <7>pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
> <6>pci 0000:00:02.0: PCI bridge to [bus 01-01]
> <7>pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
> <7>pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfcffffff]
> <7>pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
> <7>pci 0000:02:00.0: reg 10: [io 0xde00-0xdeff]
> <7>pci 0000:02:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
> <7>pci 0000:02:00.0: reg 20: [mem 0xfdfe0000-0xfdfeffff 64bit pref]
> <7>pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
> <7>pci 0000:02:00.0: supports D1 D2
> <7>pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> <7>pci 0000:02:00.0: PME# disabled
> <6>pci 0000:00:0a.0: PCI bridge to [bus 02-02]
> <7>pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
> <7>pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff]
> <7>pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
> <7>pci 0000:03:0e.0: reg 10: [mem 0xfdeff000-0xfdeff7ff]
> <7>pci 0000:03:0e.0: reg 14: [mem 0xfdef8000-0xfdefbfff]
> <7>pci 0000:03:0e.0: supports D1 D2
> <7>pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot
> <7>pci 0000:03:0e.0: PME# disabled
> <6>pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
> <7>pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
> <7>pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff]
> <7>pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref]
> <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
> <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
> <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
> <6>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> <6>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> <6>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> <6>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> <6>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> <6>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> <6>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> <6>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> <6>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
> <6>vgaarb: loaded
> <6>PCI: Using ACPI for IRQ routing
> <7>PCI: pci_cache_line_size set to 64 bytes
> <3>pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
> <6>pci 0000:00:00.0: can't reserve [mem 0xe0000000-0xffffffff 64bit]
> <4>Expanded resource reserved due to conflict with PCI Bus 0000:00
> <6>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
> <6>hpet0: 4 comparators, 32-bit 14.318180 MHz counter
> <6>Switching to clocksource hpet
> <6>pnp: PnP ACPI init
> <6>ACPI: bus type pnp registered
> <4>pnp 00:0d: disabling [mem 0x000d1c00-0x000d3fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
> <4>pnp 00:0d: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
> <4>pnp 00:0d: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
> <4>pnp 00:0d: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
> <4>pnp 00:0d: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
> <4>pnp 00:0d: disabling [mem 0x00100000-0xcfddffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
> <6>pnp: PnP ACPI: found 14 devices
> <6>ACPI: ACPI bus type pnp unregistered
> <6>system 00:01: [io 0x04d0-0x04d1] has been reserved
> <6>system 00:01: [io 0x0220-0x0225] has been reserved
> <6>system 00:01: [io 0x0290-0x0294] has been reserved
> <6>system 00:02: [io 0x4100-0x411f] has been reserved
> <6>system 00:02: [io 0x0228-0x022f] has been reserved
> <6>system 00:02: [io 0x0238-0x023f] has been reserved
> <6>system 00:02: [io 0x040b] has been reserved
> <6>system 00:02: [io 0x04d6] has been reserved
> <6>system 00:02: [io 0x0c00-0x0c01] has been reserved
> <6>system 00:02: [io 0x0c14] has been reserved
> <6>system 00:02: [io 0x0c50-0x0c52] has been reserved
> <6>system 00:02: [io 0x0c6c-0x0c6d] has been reserved
> <6>system 00:02: [io 0x0c6f] has been reserved
> <6>system 00:02: [io 0x0cd0-0x0cd1] has been reserved
> <6>system 00:02: [io 0x0cd2-0x0cd3] has been reserved
> <6>system 00:02: [io 0x0cd4-0x0cdf] has been reserved
> <6>system 00:02: [io 0x4000-0x40fe] has been reserved
> <6>system 00:02: [io 0x4210-0x4217] has been reserved
> <6>system 00:02: [io 0x0b00-0x0b0f] has been reserved
> <6>system 00:02: [io 0x0b10-0x0b1f] has been reserved
> <6>system 00:02: [io 0x0b20-0x0b3f] has been reserved
> <6>system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
> <6>system 00:0d: [mem 0xcfde0000-0xcfdfffff] could not be reserved
> <6>system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved
> <6>system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
> <6>system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
> <6>system 00:0d: [mem 0xfff80000-0xfffeffff] has been reserved
> <6>pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc01ffff pref]
> <6>pci 0000:00:02.0: PCI bridge to [bus 01-01]
> <6>pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
> <6>pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfcffffff]
> <6>pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
> <6>pci 0000:02:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf0ffff pref]
> <6>pci 0000:00:0a.0: PCI bridge to [bus 02-02]
> <6>pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
> <6>pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff]
> <6>pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
> <6>pci 0000:00:14.4: PCI bridge to [bus 03-03]
> <6>pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
> <6>pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff]
> <6>pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref]
> <6>pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> <7>pci 0000:00:02.0: setting latency timer to 64
> <6>pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> <7>pci 0000:00:0a.0: setting latency timer to 64
> <7>pci_bus 0000:00: resource 0 [io 0x0000-0x0cf7]
> <7>pci_bus 0000:00: resource 1 [io 0x0d00-0xffff]
> <7>pci_bus 0000:00: resource 2 [mem 0x000a0000-0x000bffff]
> <7>pci_bus 0000:00: resource 3 [mem 0x000c0000-0x000dffff]
> <7>pci_bus 0000:00: resource 4 [mem 0xcff00000-0xfed0ffff]
> <7>pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
> <7>pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfcffffff]
> <7>pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
> <7>pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
> <7>pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
> <7>pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
> <7>pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
> <7>pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
> <7>pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff pref]
> <7>pci_bus 0000:03: resource 3 [io 0x0000-0x0cf7]
> <7>pci_bus 0000:03: resource 4 [io 0x0d00-0xffff]
> <7>pci_bus 0000:03: resource 5 [mem 0x000a0000-0x000bffff]
> <7>pci_bus 0000:03: resource 6 [mem 0x000c0000-0x000dffff]
> <7>pci_bus 0000:03: resource 7 [mem 0xcff00000-0xfed0ffff]
> <6>NET: Registered protocol family 2
> <6>IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
> <6>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
> <6>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> <6>TCP: Hash tables configured (established 524288 bind 65536)
> <6>TCP reno registered
> <6>UDP hash table entries: 4096 (order: 5, 131072 bytes)
> <6>UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
> <6>NET: Registered protocol family 1
> <7>pci 0000:01:00.0: Boot video device
> <7>PCI: CLS 4 bytes, default 64
> <6>Trying to unpack rootfs image as initramfs...
> <6>Freeing initrd memory: 6013k freed
> <6>PCI-DMA: Disabling AGP.
> <6>PCI-DMA: aperture base @ 20000000 size 65536 KB
> <6>PCI-DMA: using GART IOMMU.
> <6>PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
> <6>audit: initializing netlink socket (disabled)
> <5>type=2000 audit(1264878799.525:1): initialized
> <6>HugeTLB registered 2 MB page size, pre-allocated 0 pages
> <6>SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
> <6>Btrfs loaded
> <6>msgmni has been set to 15865
> <6>alg: No test for stdrng (krng)
> <6>io scheduler noop registered
> <6>io scheduler deadline registered
> <6>io scheduler cfq registered (default)
> <7>pcieport 0000:00:02.0: setting latency timer to 64
> <7>pcieport 0000:00:02.0: irq 24 for MSI/MSI-X
> <7>pcieport 0000:00:0a.0: setting latency timer to 64
> <7>pcieport 0000:00:0a.0: irq 25 for MSI/MSI-X
> <6>vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011800000, using 5120k, total 262144k
> <6>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
> <6>vesafb: scrolling: redraw
> <6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
> <4>Console: switching to colour frame buffer device 160x64
> <6>fb0: VESA VGA frame buffer device
> <6>Non-volatile memory driver v1.3
> <6>Linux agpgart interface v0.103
> <6>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
> <6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> <6>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> <6>brd: module loaded
> <4>Compaq SMART2 Driver (v 2.6.0)
> <6>HP CISS Driver (v 3.6.20)
> <6>MM: desc_per_page = 128
> <6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
> <6>serio: i8042 KBD port at 0x60,0x64 irq 1
> <6>serio: i8042 AUX port at 0x60,0x64 irq 12
> <6>mice: PS/2 mouse device common for all mice
> <6>cpuidle: using governor ladder
> <6>cpuidle: using governor menu
> <4>Netfilter messages via NETLINK v0.30.
> <3>kmem_cache_create: duplicate cache ccid2_h
> <4>Pid: 1, comm: swapper Not tainted 2.6.33-rc6 #1
> <4>Call Trace:
> <4> [<ffffffff810cf8d0>] ? kmem_cache_create+0x4a0/0x550
> <4> [<ffffffff814007fe>] ? ccid_kmem_cache_create+0x5e/0x70
> <4> [<ffffffff8176cdf9>] ? ccid_initialize_builtins+0x59/0xb0
> <4> [<ffffffff8176d1c6>] ? dccp_init+0x376/0x3d7
> <4> [<ffffffff8176ce50>] ? dccp_init+0x0/0x3d7
> <4> [<ffffffff810001d5>] ? do_one_initcall+0x35/0x190
> <4> [<ffffffff8173764d>] ? kernel_init+0x174/0x1ce
> <4> [<ffffffff81003b54>] ? kernel_thread_helper+0x4/0x10
> <4> [<ffffffff817374d9>] ? kernel_init+0x0/0x1ce
> <4> [<ffffffff81003b50>] ? kernel_thread_helper+0x0/0x10
> <6>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
> <6>input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input1
> <4>registered taskstats version 1
> <6>Freeing unused kernel memory: 1344k freed

It looks like a DCCP initialization issue, so CCint netdev.

Rafael
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: tip-bot for Leann Ogasawara: "[tip:x86/urgent] x86: Add Dell OptiPlex 760 reboot quirk"
Previous message: Michael Breuer: "Re: Regressionhung task during raid rebuild 2.6.33 rc5 was: Re:2.6.33RC3 hung task - jbd2/dm-1-8 (during raid rebuild)"
In reply to: Heinz Diehl: "Re: 2.6.33-rc6, swapper - not tainted"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]