Re: acpi_idle: Very idle Core i7 machine never enters C3

[Andi Kleen]

jeff@xxxxxxxxxxxx (Jeff Garrett) writes:

> Hi,
>
> I was trying to chase down a theory that my desktop machine (a core i7)
> is running warm (the fan sounds like it's at full speed all the time,
> and I think it's not always acted this way -- hence the theory).
>
> powertop is never showing it spending any time in C3...
>
> I compiled a kernel without USB/sound/radeon, and ran without X.  I was
> able to get the wakeups/sec down below 20, but no time is spent in C3.

[...]
> This may be a complete red herring, but I added some printk logic to
> acpi_idle_bm_check(), and it is getting called often, but bm_status is
> always 1.  [I infer from this that the idle logic is trying to go into
> C3, but this check is stopping it...  Unless I misread something.]

Normally a Core i7 (or any modern Intel systems) should not use
bm_check at all. That's only for older systems that didn't support
MWAIT with c-state hint, but relied on the old port based interface. 

So something is already confused there.

I think it should still work though.
Of course if you really have a lot of bus mastering in the background
then yes there will be no C3.

-Andi


-- 
ak@xxxxxxxxxxxxxxx -- Speaking for myself only.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/