Re: [PATCH V2] tsl2550: Move form i2c/chips to als and update interfaces

From: Jonathan Cameron
Date: Tue Jan 26 2010 - 13:48:53 EST


Gah! Sorry all, I forgot to move the i2c/Makefile etc changes
to the directory removal patch!

New version in a few mins.

>
> Signed-off-by: Jonathan Cameron <jic23@xxxxxxxxx>
> ---
>
> Simple changes to meet all of Jean's comments.
>
> Made formatting changes, removed the defined maximum lux value
> and separated out the crushing of drivers/i2c/chips.
>
> If Jean is happy with fixes I would propose taking this through the ALS tree.
>
> Attached is a full patch without git move detection.
>
> Documentation/ABI/testing/sysfs-class-als | 9 +++
> drivers/als/Kconfig | 14 ++++
> drivers/als/Makefile | 2 +
> drivers/{i2c/chips => als}/tsl2550.c | 101 +++++++++++++++++-----------
> drivers/i2c/Kconfig | 1 -
> drivers/i2c/Makefile | 2 +-
> drivers/i2c/chips/Kconfig | 10 ---
> drivers/i2c/chips/Makefile | 2 -
> 8 files changed, 87 insertions(+), 54 deletions(-)
>
> diff --git a/Documentation/ABI/testing/sysfs-class-als b/Documentation/ABI/testing/sysfs-class-als
> index d3b33f3..732f449 100644
> --- a/Documentation/ABI/testing/sysfs-class-als
> +++ b/Documentation/ABI/testing/sysfs-class-als
> @@ -7,3 +7,12 @@ Description: Current Ambient Light Illuminance reported by
> Unit: lux (lumens per square meter)
> RO
>
> +What: /sys/class/als/.../exposure_time[n]
> +Date: Dec. 2009
> +KernelVersion: 2.6.32
> +Contact: Jonathan Cameron <jic23@xxxxxxxxx>
> +Description: Sensor exposure time. In some devices this
> + corresponds to the combined time needed to
> + to internally read several different sensors.
> + Unit: microseconds
> + RW
> diff --git a/drivers/als/Kconfig b/drivers/als/Kconfig
> index 200c52b..1564ffc 100644
> --- a/drivers/als/Kconfig
> +++ b/drivers/als/Kconfig
> @@ -8,3 +8,17 @@ menuconfig ALS
> This framework provides a generic sysfs I/F for Ambient Light
> Sensor devices.
> If you want this support, you should say Y or M here.
> +
> +if ALS
> +
> +config ALS_TSL2550
> + tristate "Taos TSL2550 ambient light sensor"
> + depends on EXPERIMENTAL && I2C
> + help
> + If you say yes here you get support for the Taos TSL2550
> + ambient light sensor.
> +
> + This driver can also be built as a module. If so, the module
> + will be called tsl2550.
> +
> +endif #ALS
> diff --git a/drivers/als/Makefile b/drivers/als/Makefile
> index a527197..7be5631 100644
> --- a/drivers/als/Makefile
> +++ b/drivers/als/Makefile
> @@ -3,3 +3,5 @@
> #
>
> obj-$(CONFIG_ALS) += als_sys.o
> +
> +obj-$(CONFIG_ALS_TSL2550) += tsl2550.o
> \ No newline at end of file
> diff --git a/drivers/i2c/chips/tsl2550.c b/drivers/als/tsl2550.c
> similarity index 81%
> rename from drivers/i2c/chips/tsl2550.c
> rename to drivers/als/tsl2550.c
> index a0702f3..8d5f2a1 100644
> --- a/drivers/i2c/chips/tsl2550.c
> +++ b/drivers/als/tsl2550.c
> @@ -3,6 +3,7 @@
> *
> * Copyright (C) 2007 Rodolfo Giometti <giometti@xxxxxxxx>
> * Copyright (C) 2007 Eurotech S.p.A. <info@xxxxxxxxxxx>
> + * Copyright (C) 2009 Jonathan Cameron <jic23@xxxxxxxxx>
> *
> * This program is free software; you can redistribute it and/or modify
> * it under the terms of the GNU General Public License as published by
> @@ -24,9 +25,11 @@
> #include <linux/slab.h>
> #include <linux/i2c.h>
> #include <linux/mutex.h>
> +#include <linux/err.h>
> +#include <linux/als_sys.h>
>
> #define TSL2550_DRV_NAME "tsl2550"
> -#define DRIVER_VERSION "1.2"
> +#define DRIVER_VERSION "2.0"
>
> /*
> * Defines
> @@ -44,11 +47,12 @@
> */
>
> struct tsl2550_data {
> + struct device *classdev;
> struct i2c_client *client;
> struct mutex update_lock;
>
> - unsigned int power_state : 1;
> - unsigned int operating_mode : 1;
> + unsigned int power_state:1;
> + unsigned int operating_mode:1;
> };
>
> /*
> @@ -102,15 +106,16 @@ static int tsl2550_get_adc_value(struct i2c_client *client, u8 cmd)
> return ret;
> if (!(ret & 0x80))
> return -EAGAIN;
> + if (ret == 0x7f)
> + return -ERANGE;
> return ret & 0x7f; /* remove the "valid" bit */
> }
>
> /*
> - * LUX calculation
> + * LUX calculation - note the range is dependent on combination
> + * of infrared level and visible light levels.
> */
>
> -#define TSL2550_MAX_LUX 1846
> -
> static const u8 ratio_lut[] = {
> 100, 100, 100, 100, 100, 100, 100, 100,
> 100, 100, 100, 100, 100, 100, 99, 99,
> @@ -180,8 +185,7 @@ static int tsl2550_calculate_lux(u8 ch0, u8 ch1)
> else
> return -EAGAIN;
>
> - /* LUX range check */
> - return lux > TSL2550_MAX_LUX ? TSL2550_MAX_LUX : lux;
> + return lux;
> }
>
> /*
> @@ -191,7 +195,8 @@ static int tsl2550_calculate_lux(u8 ch0, u8 ch1)
> static ssize_t tsl2550_show_power_state(struct device *dev,
> struct device_attribute *attr, char *buf)
> {
> - struct tsl2550_data *data = i2c_get_clientdata(to_i2c_client(dev));
> + struct i2c_client *client = to_i2c_client(dev->parent);
> + struct tsl2550_data *data = i2c_get_clientdata(client);
>
> return sprintf(buf, "%u\n", data->power_state);
> }
> @@ -199,12 +204,12 @@ static ssize_t tsl2550_show_power_state(struct device *dev,
> static ssize_t tsl2550_store_power_state(struct device *dev,
> struct device_attribute *attr, const char *buf, size_t count)
> {
> - struct i2c_client *client = to_i2c_client(dev);
> + struct i2c_client *client = to_i2c_client(dev->parent);
> struct tsl2550_data *data = i2c_get_clientdata(client);
> - unsigned long val = simple_strtoul(buf, NULL, 10);
> - int ret;
> + unsigned long val;
> + int ret = strict_strtoul(buf, 10, &val);
>
> - if (val < 0 || val > 1)
> + if (val < 0 || val > 1 || ret)
> return -EINVAL;
>
> mutex_lock(&data->update_lock);
> @@ -220,40 +225,45 @@ static ssize_t tsl2550_store_power_state(struct device *dev,
> static DEVICE_ATTR(power_state, S_IWUSR | S_IRUGO,
> tsl2550_show_power_state, tsl2550_store_power_state);
>
> -static ssize_t tsl2550_show_operating_mode(struct device *dev,
> - struct device_attribute *attr, char *buf)
> +static ssize_t tsl2550_show_exposure(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> {
> - struct tsl2550_data *data = i2c_get_clientdata(to_i2c_client(dev));
> -
> - return sprintf(buf, "%u\n", data->operating_mode);
> + struct i2c_client *client = to_i2c_client(dev->parent);
> + struct tsl2550_data *data = i2c_get_clientdata(client);
> + if (data->operating_mode)
> + return sprintf(buf, "160000\n");
> + else
> + return sprintf(buf, "800000\n");
> }
>
> -static ssize_t tsl2550_store_operating_mode(struct device *dev,
> - struct device_attribute *attr, const char *buf, size_t count)
> +static ssize_t tsl2550_store_exposure(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf,
> + size_t count)
> {
> - struct i2c_client *client = to_i2c_client(dev);
> + struct i2c_client *client = to_i2c_client(dev->parent);
> struct tsl2550_data *data = i2c_get_clientdata(client);
> - unsigned long val = simple_strtoul(buf, NULL, 10);
> - int ret;
> -
> - if (val < 0 || val > 1)
> - return -EINVAL;
> + unsigned long val;
>
> - if (data->power_state == 0)
> - return -EBUSY;
> + int ret = strict_strtoul(buf, 10, &val);
>
> + if (ret)
> + return -EINVAL;
> mutex_lock(&data->update_lock);
> - ret = tsl2550_set_operating_mode(client, val);
> + if (val >= 800000)
> + ret = tsl2550_set_operating_mode(client, 0);
> + else
> + ret = tsl2550_set_operating_mode(client, 1);
> mutex_unlock(&data->update_lock);
> -
> if (ret < 0)
> return ret;
>
> return count;
> }
>
> -static DEVICE_ATTR(operating_mode, S_IWUSR | S_IRUGO,
> - tsl2550_show_operating_mode, tsl2550_store_operating_mode);
> +static DEVICE_ATTR(exposure_time0, S_IWUSR | S_IRUGO,
> + tsl2550_show_exposure, tsl2550_store_exposure);
>
> static ssize_t __tsl2550_show_lux(struct i2c_client *client, char *buf)
> {
> @@ -284,7 +294,7 @@ static ssize_t __tsl2550_show_lux(struct i2c_client *client, char *buf)
> static ssize_t tsl2550_show_lux1_input(struct device *dev,
> struct device_attribute *attr, char *buf)
> {
> - struct i2c_client *client = to_i2c_client(dev);
> + struct i2c_client *client = to_i2c_client(dev->parent);
> struct tsl2550_data *data = i2c_get_clientdata(client);
> int ret;
>
> @@ -299,13 +309,13 @@ static ssize_t tsl2550_show_lux1_input(struct device *dev,
> return ret;
> }
>
> -static DEVICE_ATTR(lux1_input, S_IRUGO,
> +static DEVICE_ATTR(illuminance0, S_IRUGO,
> tsl2550_show_lux1_input, NULL);
>
> static struct attribute *tsl2550_attributes[] = {
> &dev_attr_power_state.attr,
> - &dev_attr_operating_mode.attr,
> - &dev_attr_lux1_input.attr,
> + &dev_attr_exposure_time0.attr,
> + &dev_attr_illuminance0.attr,
> NULL
> };
>
> @@ -391,14 +401,22 @@ static int __devinit tsl2550_probe(struct i2c_client *client,
> goto exit_kfree;
>
> /* Register sysfs hooks */
> - err = sysfs_create_group(&client->dev.kobj, &tsl2550_attr_group);
> - if (err)
> + data->classdev = als_device_register(&client->dev);
> + if (IS_ERR(data->classdev)) {
> + err = PTR_ERR(data->classdev);
> goto exit_kfree;
> + }
> +
> + err = sysfs_create_group(&data->classdev->kobj, &tsl2550_attr_group);
> + if (err)
> + goto exit_unreg;
>
> dev_info(&client->dev, "support ver. %s enabled\n", DRIVER_VERSION);
>
> return 0;
>
> +exit_unreg:
> + als_device_unregister(data->classdev);
> exit_kfree:
> kfree(data);
> exit:
> @@ -407,12 +425,15 @@ exit:
>
> static int __devexit tsl2550_remove(struct i2c_client *client)
> {
> - sysfs_remove_group(&client->dev.kobj, &tsl2550_attr_group);
> + struct tsl2550_data *data = i2c_get_clientdata(client);
> +
> + sysfs_remove_group(&data->classdev->kobj, &tsl2550_attr_group);
> + als_device_unregister(data->classdev);
>
> /* Power down the device */
> tsl2550_set_power_state(client, 0);
>
> - kfree(i2c_get_clientdata(client));
> + kfree(data);
>
> return 0;
> }
> diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
> index 8d8a00e..5c33a71 100644
> --- a/drivers/i2c/Kconfig
> +++ b/drivers/i2c/Kconfig
> @@ -63,7 +63,6 @@ config I2C_HELPER_AUTO
>
> source drivers/i2c/algos/Kconfig
> source drivers/i2c/busses/Kconfig
> -source drivers/i2c/chips/Kconfig
>
> config I2C_DEBUG_CORE
> bool "I2C Core debugging messages"
> diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
> index ba26e6c..ce5fd62 100644
> --- a/drivers/i2c/Makefile
> +++ b/drivers/i2c/Makefile
> @@ -5,7 +5,7 @@
> obj-$(CONFIG_I2C_BOARDINFO) += i2c-boardinfo.o
> obj-$(CONFIG_I2C) += i2c-core.o
> obj-$(CONFIG_I2C_CHARDEV) += i2c-dev.o
> -obj-y += busses/ chips/ algos/
> +obj-y += busses/ algos/
>
> ifeq ($(CONFIG_I2C_DEBUG_CORE),y)
> EXTRA_CFLAGS += -DDEBUG
> diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
> index ae4539d..c11f8d6 100644
> --- a/drivers/i2c/chips/Kconfig
> +++ b/drivers/i2c/chips/Kconfig
> @@ -6,14 +6,4 @@
>
> menu "Miscellaneous I2C Chip support"
>
> -config SENSORS_TSL2550
> - tristate "Taos TSL2550 ambient light sensor"
> - depends on EXPERIMENTAL
> - help
> - If you say yes here you get support for the Taos TSL2550
> - ambient light sensor.
> -
> - This driver can also be built as a module. If so, the module
> - will be called tsl2550.
> -
> endmenu
> diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
> index fe0af0f..ffde18d 100644
> --- a/drivers/i2c/chips/Makefile
> +++ b/drivers/i2c/chips/Makefile
> @@ -10,8 +10,6 @@
> # * I/O expander drivers go to drivers/gpio
> #
>
> -obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o
> -
> ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
> EXTRA_CFLAGS += -DDEBUG
> endif

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/