Re: sata_nv times out for BD-ROM iHOS104-08

From: Cengiz GÃnay
Date: Sat Jan 23 2010 - 16:40:33 EST

Next message: Arjan van de Ven: "Re: NFS_FSCACHE still depends on EXPERIMENTAL?"
Previous message: Mikael Pettersson: "[PATCH 2.6.33-rc5] futex_lock_pi() key refcnt fix"
In reply to: Tejun Heo: "Re: sata_nv times out for BD-ROM iHOS104-08"
Next in thread: Gregory Moyer: "Re: sata_nv times out for BD-ROM iHOS104-08"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hello,

2010/1/22 Tejun Heo <tj@xxxxxxxxxx>:
> The parameter isn't being passed to the module loaded by initrd. ÂYou
> probably need to edit modules.conf and then regenerate initrd. Â:-(

Ok, you're right. I forgot I had to do that. So now I did it for
ADMA=0, SWNCQ=0 and MSI=1, separately. None worked, and all dmesg
outputs attached.

> Yeah, I was about to suggest trying the patch. ÂIt could be that the
> timeout used by the new TUR code is too aggressive.

Unfortunately that didn't work, either (attached). It kept on changing
DMA modes down to PIO0 and completly failed in the end. Should I try
different sata_nv parameters with this patch if needed?

Thanks,
--
Cengiz
BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data)
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32 root=/dev/mapper/nvidia_ceebaiib1 ro single sata_nv.adma_enabled=0
Memory: 2052264k/2096064k available (2319k kernel code, 42132k reserved, 912k data, 404k init, 1186760k highmem)
.data : 0xc1243e41 - 0xc1328128 ( 912 kB)
libata version 3.00 loaded.
sata_nv 0000:00:0e.0: version 3.5
sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21
sata_nv 0000:00:0e.0: Using SWNCQ mode
sata_nv 0000:00:0e.0: setting latency timer to 64
scsi1 : sata_nv
scsi2 : sata_nv
ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd400 irq 21
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd408 irq 21
sata_nv 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 20 (level, low) -> IRQ 20
sata_nv 0000:00:0f.0: Using SWNCQ mode
sata_nv 0000:00:0f.0: setting latency timer to 64
scsi3 : sata_nv
scsi4 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xe800 irq 20
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xe808 irq 20
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: SAMSUNG SP2504C, VT100-41, max UDMA7
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-7: ST3250620AS, 3.AAC, max UDMA/133
ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: ATAPI iHOS104, WL08, max UDMA/100
ata4.00: configured for UDMA/100
sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
PM: Adding info for No Bus:sda
sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sda:
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
PM: Adding info for No Bus:sdb
sdb:
PM: Adding info for No Bus:sdc
PM: Adding info for No Bus:sdd
PM: Adding info for No Bus:sde
sd 0:0:0:0: [sdc] Attached SCSI removable disk
sd 0:0:0:1: [sdd] Attached SCSI removable disk
PM: Adding info for No Bus:sdf
sd 0:0:0:2: [sde] Attached SCSI removable disk
sd 0:0:0:3: [sdf] Attached SCSI removable disk
sda1 sda2 sda3 < unknown partition table
sd 2:0:0:0: [sdb] Attached SCSI disk
PM: Adding info for No Bus:sda1
PM: Adding info for No Bus:sda2
PM: Adding info for No Bus:sda3
sd 1:0:0:0: [sda] Attached SCSI disk
ata4.00: qc timeout (cmd 0xa0)
ata4.00: TEST_UNIT_READY failed (err_mask=0x5)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for UDMA/100
sd 5:0:0:0: [sdg] 3981312 512-byte logical blocks: (2.03 GB/1.89 GiB)
sd 5:0:0:0: [sdg] Write Protect is off
sd 5:0:0:0: [sdg] Mode Sense: 43 00 00 00
sd 5:0:0:0: [sdg] Assuming drive cache: write through
PM: Adding info for No Bus:sdg
sd 5:0:0:0: [sdg] Assuming drive cache: write through
sdg: sdg1
PM: Adding info for No Bus:sdg1
sd 5:0:0:0: [sdg] Assuming drive cache: write through
sd 5:0:0:0: [sdg] Attached SCSI removable disk
ata4.00: qc timeout (cmd 0xa0)
ata4.00: TEST_UNIT_READY failed (err_mask=0x5)
ata4: limiting SATA link speed to 1.5 Gbps
ata4.00: limiting speed to UDMA/100:PIO3
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for UDMA/100
ata4.00: qc timeout (cmd 0xa0)
ata4.00: TEST_UNIT_READY failed (err_mask=0x5)
ata4.00: disabled
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4: EH complete
EXT3-fs: mounted filesystem with writeback data mode.
hda: task_no_data_intr: status=0x41 { DriveReady Error }
hda: task_no_data_intr: error=0x04 { AbortedCommand }
hda: task_no_data_intr: status=0x41 { DriveReady Error }
hda: task_no_data_intr: error=0x04 { AbortedCommand }
EXT3-fs: mounted filesystem with writeback data mode.
BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data)
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
Memory: 2052264k/2096064k available (2319k kernel code, 42136k reserved, 912k data, 404k init, 1186760k highmem)
.data : 0xc1243e41 - 0xc1328128 ( 912 kB)
libata version 3.00 loaded.
sata_nv 0000:00:0e.0: version 3.5
sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:0e.0: setting latency timer to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd400 irq 23
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd408 irq 23
sata_nv 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:0f.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xe800 irq 22
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xe808 irq 22
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: SAMSUNG SP2504C, VT100-41, max UDMA7
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-7: ST3250620AS, 3.AAC, max UDMA/133
ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: ATAPI iHOS104, WL08, max UDMA/100
ata4.00: configured for UDMA/100
ata4.00: qc timeout (cmd 0xa0)
ata4.00: TEST_UNIT_READY failed (err_mask=0x5)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for UDMA/100
ata4.00: qc timeout (cmd 0xa0)
ata4.00: TEST_UNIT_READY failed (err_mask=0x5)
ata4: limiting SATA link speed to 1.5 Gbps
ata4.00: limiting speed to UDMA/100:PIO3
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for UDMA/100
ata4.00: qc timeout (cmd 0xa0)
ata4.00: TEST_UNIT_READY failed (err_mask=0x5)
ata4.00: disabled
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4: EH complete
pata_amd 0000:00:0d.0: version 0.4.1
pata_amd 0000:00:0d.0: setting latency timer to 64
scsi4 : pata_amd
scsi5 : pata_amd
ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
ata5: port disabled. ignoring.
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
PM: Adding info for No Bus:sda
sda:
sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
PM: Adding info for No Bus:sdb
sdb: sda1 sda2 sda3 <
PM: Adding info for No Bus:sda1
PM: Adding info for No Bus:sda2
PM: Adding info for No Bus:sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: [sdb] Attached SCSI disk
ata6.00: ATAPI: PIONEER DVD-RW DVR-111D, 1.23, max UDMA/66
ata6: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc500) ACPI=0x1f01f (30:600:0x13)
ata6.00: configured for UDMA/66
EXT3-fs: mounted filesystem with writeback data mode.
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 6:0:0:1: Attached scsi generic sg4 type 0
PM: Adding info for No Bus:sdc
PM: Adding info for No Bus:sdd
sd 6:0:0:2: Attached scsi generic sg5 type 0
sd 6:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:1: [sdd] Attached SCSI removable disk
sd 6:0:0:3: Attached scsi generic sg6 type 0
PM: Adding info for No Bus:sde
PM: Adding info for No Bus:sdf
sd 6:0:0:2: [sde] Attached SCSI removable disk
sd 6:0:0:3: [sdf] Attached SCSI removable disk
EXT3-fs: mounted filesystem with writeback data mode.
sd 7:0:0:0: Attached scsi generic sg7 type 0
sd 7:0:0:0: [sdg] 3981312 512-byte logical blocks: (2.03 GB/1.89 GiB)
sd 7:0:0:0: [sdg] Write Protect is off
sd 7:0:0:0: [sdg] Mode Sense: 43 00 00 00
sd 7:0:0:0: [sdg] Assuming drive cache: write through
PM: Adding info for No Bus:sdg
sd 7:0:0:0: [sdg] Assuming drive cache: write through
sdg: sdg1
PM: Adding info for No Bus:sdg1
sd 7:0:0:0: [sdg] Assuming drive cache: write through
sd 7:0:0:0: [sdg] Attached SCSI removable disk
BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data)
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
Memory: 2052264k/2096064k available (2319k kernel code, 42136k reserved, 912k data, 404k init, 1186760k highmem)
.data : 0xc1243e41 - 0xc1328128 ( 912 kB)
libata version 3.00 loaded.
sata_nv 0000:00:0e.0: version 3.5
sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:0e.0: Using MSI
sata_nv 0000:00:0e.0: setting latency timer to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd400 irq 23
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd408 irq 23
sata_nv 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:0f.0: Using MSI
sata_nv 0000:00:0f.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xe800 irq 22
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xe808 irq 22
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: SAMSUNG SP2504C, VT100-41, max UDMA7
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-7: ST3250620AS, 3.AAC, max UDMA/133
ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: ATAPI iHOS104, WL08, max UDMA/100
ata4.00: configured for UDMA/100
ata4.00: qc timeout (cmd 0xa0)
ata4.00: TEST_UNIT_READY failed (err_mask=0x5)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for UDMA/100
ata4.00: qc timeout (cmd 0xa0)
ata4.00: TEST_UNIT_READY failed (err_mask=0x5)
ata4: limiting SATA link speed to 1.5 Gbps
ata4.00: limiting speed to UDMA/100:PIO3
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for UDMA/100
ata4.00: qc timeout (cmd 0xa0)
ata4.00: TEST_UNIT_READY failed (err_mask=0x5)
ata4.00: disabled
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4: EH complete
pata_amd 0000:00:0d.0: version 0.4.1
pata_amd 0000:00:0d.0: setting latency timer to 64
scsi4 : pata_amd
scsi5 : pata_amd
ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
ata5: port disabled. ignoring.
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
PM: Adding info for No Bus:sdb
sdb:
PM: Adding info for No Bus:sda
sda: sda1 sda2 sda3 < unknown partition table
sd 1:0:0:0: [sdb] Attached SCSI disk
PM: Adding info for No Bus:sda1
PM: Adding info for No Bus:sda2
PM: Adding info for No Bus:sda3
sd 0:0:0:0: [sda] Attached SCSI disk
ata6.00: ATAPI: PIONEER DVD-RW DVR-111D, 1.23, max UDMA/66
ata6: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc500) ACPI=0x1f01f (30:600:0x13)
ata6.00: configured for UDMA/66
EXT3-fs: mounted filesystem with writeback data mode.
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 6:0:0:1: Attached scsi generic sg4 type 0
PM: Adding info for No Bus:sdc
sd 6:0:0:2: Attached scsi generic sg5 type 0
PM: Adding info for No Bus:sdd
sd 6:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:3: Attached scsi generic sg6 type 0
sd 6:0:0:1: [sdd] Attached SCSI removable disk
PM: Adding info for No Bus:sde
PM: Adding info for No Bus:sdf
sd 6:0:0:2: [sde] Attached SCSI removable disk
sd 6:0:0:3: [sdf] Attached SCSI removable disk
EXT3-fs: mounted filesystem with writeback data mode.
sd 7:0:0:0: Attached scsi generic sg7 type 0
sd 7:0:0:0: [sdg] 3981312 512-byte logical blocks: (2.03 GB/1.89 GiB)
sd 7:0:0:0: [sdg] Write Protect is off
sd 7:0:0:0: [sdg] Mode Sense: 43 00 00 00
sd 7:0:0:0: [sdg] Assuming drive cache: write through
PM: Adding info for No Bus:sdg
sd 7:0:0:0: [sdg] Assuming drive cache: write through
sdg: sdg1
PM: Adding info for No Bus:sdg1
sd 7:0:0:0: [sdg] Assuming drive cache: write through
sd 7:0:0:0: [sdg] Attached SCSI removable disk
libata version 3.00 loaded.
sata_nv 0000:00:0e.0: version 3.5
sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21
sata_nv 0000:00:0e.0: Using SWNCQ mode
sata_nv 0000:00:0e.0: setting latency timer to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd400 irq 21
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd408 irq 21
sata_nv 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 20 (level, low) -> IRQ 20
sata_nv 0000:00:0f.0: Using SWNCQ mode
sata_nv 0000:00:0f.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xe800 irq 20
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xe808 irq 20
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: SAMSUNG SP2504C, VT100-41, max UDMA7
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-7: ST3250620AS, 3.AAC, max UDMA/133
ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: ATAPI iHOS104, WL08, max UDMA/100
ata4.00: configured for UDMA/100
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for UDMA/100
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4: limiting SATA link speed to 1.5 Gbps
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for UDMA/100
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: limiting speed to UDMA/66:PIO4
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for UDMA/66
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: limiting speed to UDMA/33:PIO4
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for UDMA/33
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: limiting speed to PIO4
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO4
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: limiting speed to PIO3
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO3
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: limiting speed to PIO0
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
PM: Adding info for No Bus:sda
sda:
sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
PM: Adding info for No Bus:sdb
sdb:
PM: Adding info for No Bus:sdc
sd 5:0:0:0: [sdg] 3981312 512-byte logical blocks: (2.03 GB/1.89 GiB)
PM: Adding info for No Bus:sdd
PM: Adding info for No Bus:sde
sd 5:0:0:0: [sdg] Write Protect is off
sd 5:0:0:0: [sdg] Mode Sense: 43 00 00 00
sd 5:0:0:0: [sdg] Assuming drive cache: write through
PM: Adding info for No Bus:sdg
sd 4:0:0:0: [sdc] Attached SCSI removable disk
sd 4:0:0:1: [sdd] Attached SCSI removable disk
PM: Adding info for No Bus:sdf
sd 4:0:0:2: [sde] Attached SCSI removable disk
sd 5:0:0:0: [sdg] Assuming drive cache: write through
sdg:
sd 4:0:0:3: [sdf] Attached SCSI removable disk
sdg1
PM: Adding info for No Bus:sdg1
sd 1:0:0:0: [sdb] Attached SCSI disk
sd 5:0:0:0: [sdg] Assuming drive cache: write through
sd 5:0:0:0: [sdg] Attached SCSI removable disk
sda1 sda2 sda3 < >
PM: Adding info for No Bus:sda1
PM: Adding info for No Bus:sda2
PM: Adding info for No Bus:sda3
sd 0:0:0:0: [sda] Attached SCSI disk
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
[<f903e13a>] ? init_sd+0x13a/0x17a [sd_mod]
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: WARNING: synchronous SCSI scan failed without making any progress,
ata4: EH complete
EXT3-fs: mounted filesystem with writeback data mode.
hda: task_no_data_intr: status=0x41 { DriveReady Error }
hda: task_no_data_intr: error=0x04 { AbortedCommand }
hda: task_no_data_intr: status=0x41 { DriveReady Error }
hda: task_no_data_intr: error=0x04 { AbortedCommand }
EXT3-fs: mounted filesystem with writeback data mode.
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete
ata4: drained 18 bytes to clear DRQ.
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: nv: skipping hardreset on occupied port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for PIO0
ata4: EH complete

Next message: Arjan van de Ven: "Re: NFS_FSCACHE still depends on EXPERIMENTAL?"
Previous message: Mikael Pettersson: "[PATCH 2.6.33-rc5] futex_lock_pi() key refcnt fix"
In reply to: Tejun Heo: "Re: sata_nv times out for BD-ROM iHOS104-08"
Next in thread: Gregory Moyer: "Re: sata_nv times out for BD-ROM iHOS104-08"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]