[PATCH 3/3] mmc: bfin_sdh: set timeout based on actual card data

[Mike Frysinger]

From: Cliff Cai <cliff.cai@xxxxxxxxxx>

The hardcoded value doesn't really work for all cards.

Signed-off-by: Cliff Cai <cliff.cai@xxxxxxxxxx>
Signed-off-by: Mike Frysinger <vapier@xxxxxxxxxx>
---
 drivers/mmc/host/bfin_sdh.c |    8 ++++++--
 1 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/bfin_sdh.c b/drivers/mmc/host/bfin_sdh.c
index f218a99..56f7b44 100644
--- a/drivers/mmc/host/bfin_sdh.c
+++ b/drivers/mmc/host/bfin_sdh.c
@@ -115,6 +115,7 @@ static int sdh_setup_data(struct sdh_host *host, struct mmc_data *data)
 	unsigned int length;
 	unsigned int data_ctl;
 	unsigned int dma_cfg;
+	unsigned int cycle_ns, timeout;
 
 	dev_dbg(mmc_dev(host->mmc), "%s enter flags: 0x%x\n", __func__, data->flags);
 	host->data = data;
@@ -135,8 +136,11 @@ static int sdh_setup_data(struct sdh_host *host, struct mmc_data *data)
 	data_ctl |= ((ffs(data->blksz) - 1) << 4);
 
 	bfin_write_SDH_DATA_CTL(data_ctl);
-
-	bfin_write_SDH_DATA_TIMER(0xFFFF);
+	/* the time of a host clock period in ns */
+	cycle_ns = 1000000000 / (get_sclk() / (2 * (host->clk_div + 1)));
+	timeout = data->timeout_ns / cycle_ns;
+	timeout += data->timeout_clks;
+	bfin_write_SDH_DATA_TIMER(timeout);
 	SSYNC();
 
 	if (data->flags & MMC_DATA_READ) {
-- 
1.6.6

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/