Re: drm_vm.c:drm_mmap: possible circular locking dependency detected

[Tejun Heo]

Hello,

On 01/03/2010 06:49 AM, Eric W. Biederman wrote:
>>> sysfs_deactivate happens in the device_del(), but if we were to move
>>> sysfs_deactivate into the final kobject_put then in theory we can
>>> continue to block and be friendly but not need to be called with
>>> locations where locks are held.
>>
>> Nobody would know when that final put will actually happen.  In
>> progress sysfs ops might access the hardware after the hardware is
>> gone or replaced with another unit.
> 
> Alright than that is a bad possible split of the functionality.  Which
> is all I was suggesting splitting the functionality not doing away
> with the wait or moving it to a point where the wait would not work.
> It was simply my bad assumption that the final kobject_put would
> happen before the module that controlled that kobject could be
> removed.

The module should stay around.  The severing is necessary to protect
driver internal data structures and possibly removed or reattached (to
a different driver) hardware.

> I still think it might make sense to separate kobject_del into two
> parts.  One that we call with the locks held and one without, but that
> does seem to be applicable to only a very small set of cases and our
> problems appear to be much larger than that.

If such separation is necessary, we can implement the split interface
while leaving kobject_del() as is feature-wise and convert the
offending ones to use the split interface but I think it would be
better to simply fix the offending ones if there aren't too many and
they're easily fixable.  Let's see how many lockdep warnings turn up.

> For the moment I have generated a patch that does the lockdep
> annotations, and I have found that a simple:
> 
>    find /sys -type f | xargs cat {} > /dev/null
> 
> trivially generates lockdep warnings.  In particular:

(cc'ing Dmitry, Hi!)

> [  165.049042] 
> [  165.049044] =======================================================
> [  165.052761] [ INFO: possible circular locking dependency detected ]
> [  165.052761] 2.6.33-rc2x86_64 #3
> [  165.052761] -------------------------------------------------------
> [  165.052761] cat/5026 is trying to acquire lock:
> [  165.052761]  (&serio->drv_mutex){+.+.+.}, at: [<ffffffff8132ecaa>] atkbd_attr_show_helper+0x28/0x6e
> [  165.052761] 
> [  165.052761] but task is already holding lock:
> [  165.089443]  (s_active){++++.+}, at: [<ffffffff810e84dd>] sysfs_get_active_two+0x2c/0x43
> [  165.089443] 
> [  165.089443] which lock already depends on the new lock.
> [  165.089443] 
> [  165.089443] 
> [  165.089443] the existing dependency chain (in reverse order) is:
> [  165.089443] 
> [  165.089443] -> #1 (s_active){++++.+}:
> [  165.089443]        [<ffffffff81054956>] validate_chain+0xa25/0xd1d
> [  165.089443]        [<ffffffff810553d3>] __lock_acquire+0x785/0x7dc
> [  165.089443]        [<ffffffff81056112>] lock_acquire+0x5a/0x74
> [  165.089443]        [<ffffffff810e8202>] sysfs_addrm_finish+0xba/0x125
> [  165.089443]        [<ffffffff810e68b0>] sysfs_hash_and_remove+0x4f/0x6b
> [  165.089443]        [<ffffffff810e94cf>] remove_files+0x1f/0x2c
> [  165.089443]        [<ffffffff810e9561>] sysfs_remove_group+0x85/0xb4
> [  165.089443]        [<ffffffff81331f0f>] psmouse_disconnect+0x33/0x147
> [  165.089443]        [<ffffffff8132687b>] serio_disconnect_driver+0x2d/0x3a
> [  165.089443]        [<ffffffff81326898>] serio_driver_remove+0x10/0x14
> [  165.089443]        [<ffffffff812077f0>] __device_release_driver+0x67/0xb0
> [  165.089443]        [<ffffffff81207857>] device_release_driver+0x1e/0x2b
> [  165.089443]        [<ffffffff81326e68>] serio_disconnect_port+0x60/0x69
> [  165.089443]        [<ffffffff8132757a>] serio_thread+0x170/0x34a
> [  165.089443]        [<ffffffff810470e7>] kthread+0x7d/0x85
> [  165.089443]        [<ffffffff81002cd4>] kernel_thread_helper+0x4/0x10
> [  165.089443] 
> [  165.089443] -> #0 (&serio->drv_mutex){+.+.+.}:
> [  165.089443]        [<ffffffff81054642>] validate_chain+0x711/0xd1d
> [  165.089443]        [<ffffffff810553d3>] __lock_acquire+0x785/0x7dc
> [  165.089443]        [<ffffffff81056112>] lock_acquire+0x5a/0x74
> [  165.089443]        [<ffffffff814378ed>] mutex_lock_interruptible_nested+0x4a/0x307
> [  165.089443]        [<ffffffff8132ecaa>] atkbd_attr_show_helper+0x28/0x6e
> [  165.089443]        [<ffffffff8132ed81>] atkbd_do_show_extra+0x13/0x15
> [  165.089443]        [<ffffffff812049b6>] dev_attr_show+0x20/0x43
> [  165.089443]        [<ffffffff810e71db>] sysfs_read_file+0xba/0x145
> [  165.089443]        [<ffffffff8109f507>] vfs_read+0xab/0x147
> [  165.089443]        [<ffffffff8109f85c>] sys_read+0x47/0x70
> [  165.089443]        [<ffffffff81001f2b>] system_call_fastpath+0x16/0x1b
> [  165.089443] 
> [  165.089443] other info that might help us debug this:
> [  165.089443] 
> [  165.089443] 3 locks held by cat/5026:
> [  165.089443]  #0:  (&buffer->mutex){+.+.+.}, at: [<ffffffff810e715a>] sysfs_read_file+0x39/0x145
> [  165.089443]  #1:  (s_active){++++.+}, at: [<ffffffff810e84d0>] sysfs_get_active_two+0x1f/0x43
> [  165.089443]  #2:  (s_active){++++.+}, at: [<ffffffff810e84dd>] sysfs_get_active_two+0x2c/0x43
> [  165.089443] 
> [  165.089443] stack backtrace:
> [  165.089443] Pid: 5026, comm: cat Not tainted 2.6.33-rc2x86_64 #3
> [  165.089443] Call Trace:
> [  165.089443]  [<ffffffff810538f3>] print_circular_bug+0xb3/0xc1
> [  165.089443]  [<ffffffff81054642>] validate_chain+0x711/0xd1d
> [  165.089443]  [<ffffffff81052fb6>] ? trace_hardirqs_on_caller+0x10b/0x12f
> [  165.089443]  [<ffffffff810553d3>] __lock_acquire+0x785/0x7dc
> [  165.089443]  [<ffffffff8132ecaa>] ? atkbd_attr_show_helper+0x28/0x6e
> [  165.089443]  [<ffffffff81056112>] lock_acquire+0x5a/0x74
> [  165.089443]  [<ffffffff8132ecaa>] ? atkbd_attr_show_helper+0x28/0x6e
> [  165.089443]  [<ffffffff814378ed>] mutex_lock_interruptible_nested+0x4a/0x307
> [  165.089443]  [<ffffffff8132ecaa>] ? atkbd_attr_show_helper+0x28/0x6e
> [  165.089443]  [<ffffffff8132ee41>] ? atkbd_show_extra+0x0/0x28
> [  165.089443]  [<ffffffff8132ecaa>] atkbd_attr_show_helper+0x28/0x6e
> [  165.089443]  [<ffffffff8132ed81>] atkbd_do_show_extra+0x13/0x15
> [  165.089443]  [<ffffffff812049b6>] dev_attr_show+0x20/0x43
> [  165.089443]  [<ffffffff810e71db>] sysfs_read_file+0xba/0x145
> [  165.089443]  [<ffffffff8109f507>] vfs_read+0xab/0x147
> [  165.089443]  [<ffffffff8109f85c>] sys_read+0x47/0x70
> [  165.089443]  [<ffffffff81001f2b>] system_call_fastpath+0x16/0x1b
> 
> Suggestions on how to sort out this other set of issues are welcome.

Ummm... read of an input sysfs node can trigger
serio_disconnect_port() under serio->drv_mutex, which unfortunately
would need to wait for completion of in-progress sysfs ops thus
creating possibility for AB-BA deadlock.  Dmitry, is it possible to
make serio_disconnect_port() asynchronous from the sysfs ops (ie. put
it in a work or something)?

Thanks.

-- 
tejun
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/