Re: [PATCH 5/5 -v2] acpi, apei, Document for APEI

[Bjorn Helgaas]

On Thursday 10 December 2009 12:17:04 am Huang Ying wrote:
> Add document for APEI, including kernel parameters and EINJ debug file
> sytem interface.

>From a stylistic point of view, I think it's better if the
documentation is added by the same patch that adds the functionality.
Having them in separate patches means there's a point in time where
the tree contains the functionality but not the documentation, or
vice versa.

Bjorn

> Signed-off-by: Huang Ying <ying.huang@xxxxxxxxx>
> ---
>  Documentation/acpi/apei/einj.txt    |   49 ++++++++++++++++++++++++++++++++++++
>  Documentation/kernel-parameters.txt |    5 +++
>  2 files changed, 54 insertions(+)
>  create mode 100644 Documentation/acpi/apei/einj.txt
> 
> --- /dev/null
> +++ b/Documentation/acpi/apei/einj.txt
> @@ -0,0 +1,49 @@
> +			APEI Error INJection
> +			~~~~~~~~~~~~~~~~~~~~
> +
> +EINJ provides a hardware error injection mechanism, it is very useful
> +for debugging and testing of other APEI and RAS features.
> +
> +To use EINJ, make the following is enabled in your kernel
> +configuration:
> +
> +CONFIG_DEBUG_FS
> +CONFIG_ACPI_APEI
> +CONFIG_ACPI_APEI_EINJ
> +
> +The user interface of EINJ is in debug file system, under the
> +directory apei/einj. The following files are provided.
> +
> +- available_error_type
> +  Read this file will return the error injection capability of the
> +  platform, that is, which error types are supported. The error type
> +  definition is as follow, the left field is the error type value, the
> +  right field is error description.
> +
> +    0x00000001	Processor Correctable
> +    0x00000002	Processor Uncorrectable non-fatal
> +    0x00000004	Processor Uncorrectable fatal
> +    0x00000008  Memory Correctable
> +    0x00000010  Memory Uncorrectable non-fatal
> +    0x00000020  Memory Uncorrectable fatal
> +    0x00000040	PCI Express Correctable
> +    0x00000080	PCI Express Uncorrectable fatal
> +    0x00000100	PCI Express Uncorrectable non-fatal
> +    0x00000200	Platform Correctable
> +    0x00000400	Platform Uncorrectable non-fatal
> +    0x00000800	Platform Uncorrectable fatal
> +
> +  The format of file contents are as above, except there are only the
> +  available error type lines.
> +
> +- error_type
> +  This file is used to set the error type value. The error type value
> +  is defined in "available_error_type" description.
> +
> +- error_inject
> +  Write any integer to this file to trigger the error
> +  injection. Before this, please specify all necessary error
> +  parameters.
> +
> +For more information about EINJ, please refer to ACPI specification
> +version 4.0, section 17.5.
> --- a/Documentation/kernel-parameters.txt
> +++ b/Documentation/kernel-parameters.txt
> @@ -338,6 +338,11 @@ and is between 256 and 4096 characters. 
>  			not play well with APC CPU idle - disable it if you have
>  			APC and your system crashes randomly.
>  
> +	apei.hest_disable= [ACPI]
> +			Disable Hardware Error Source Table (HEST) support,
> +			corresponding firmware-first mode error processing
> +			logic will be disabled.
> +
>  	apic=		[APIC,X86-32] Advanced Programmable Interrupt Controller
>  			Change the output verbosity whilst booting
>  			Format: { quiet (default) | verbose | debug }
> 
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/