Re: dynamic ftrace - graph

From: Michal Simek
Date: Fri Dec 11 2009 - 10:29:02 EST

Next message: Dmitri Vorobiev: "Add missing header for HTC Dream framebuffer"
Previous message: AmÃrico Wang: "Re: [Patch] ipc: HARD_MSGMAX should be higher not lower on 64bit"
In reply to: Steven Rostedt: "Re: dynamic ftrace - graph"
Next in thread: Steven Rostedt: "Re: dynamic ftrace - graph"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Steven Rostedt wrote:

On Fri, 2009-12-11 at 15:40 +0100, Michal Simek wrote:
Steven Rostedt wrote:

Hey, if they work and they are only in your arch, then I'm fine with
them ;-)

yeah. There is one just small hook to recordmcount.pl. :-)

I may need to give an acked-by. If I did not yet, could you send me that
specific patch.

I sent that patches to LKML last month - you were cc'd.
http://lkml.org/lkml/2009/11/23/48

You should get it in your mailbox

That part is pretty easy. :-)

diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl
index 090d300..b30dabd 100755
--- a/scripts/recordmcount.pl
+++ b/scripts/recordmcount.pl
@@ -245,6 +245,9 @@ if ($arch eq "x86_64") {
$ld .= " -m elf64_sparc";
$cc .= " -m64";
$objcopy .= " -O elf64-sparc";
+} elsif ($arch eq "microblaze") {
+ # Microblaze calls '_mcount' instead of plain 'mcount'.
+ $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s_mcount\$";
} else {
die "Arch $arch is not supported with CONFIG_FTRACE_MCOUNT_RECORD";
}

we will see. Currently I have small problem only with irqsoff but I think this don't have connection with ftrace - only with lockdep I think. :-)

You have lockdep working? If you get lockdep working you should get the
irqsoff tracer for free.

I have some problems when I turn on lockdep debug (CONFIG_DEBUG_LOCKDEP) - kernel freeze for currently unknown reason.
I saw that some arch has some part of code in entry.S but I haven't had a time to look at them - maybe needs some changes there too.

As you can see below locking testsuite output looks fine but irqsoff tracer freeze the kernel. Function tracer is ok.

There could be a problem with some arch specific functions which shouldn't be compiled with -pg.

Any suggestions? :-)

Thanks,
Michal

early_printk_console is enabled at 0x84000000
Ramdisk addr 0x00000003, FDT at 0x92000000
Linux version 2.6.32-05317-g51828dd (monstr@xxxxxxxxx) (gcc version 4.1.2) #245 Fri Dec 11 16:16:57 CET 2009
setup_cpuinfo: initialising
setup_cpuinfo: Using full CPU PVR support
cache: wt_msr
setup_memory: max_mapnr: 0x10000
setup_memory: min_low_pfn: 0x90000
setup_memory: max_low_pfn: 0xa0000
On node 0 totalpages: 65536
free_area_init_node: node 0, pgdat c051f710, node_mem_map c107e000
Normal zone: 512 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 65024 pages, LIFO batch:15
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
Kernel command line: console=ttyUL0,115200
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 242560k/262144k available
Hierarchical RCU implementation.
NR_IRQS:32
xlnx,xps-intc-1.00.a #0 at 0xd0000000, num_irq=9, edge=0x100
xlnx,xps-timer-1.00.a #0 at 0xd0004000, irq=3
Heartbeat GPIO at 0xd0008000
microblaze_timer_set_mode: shutdown
microblaze_timer_set_mode: periodic
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 48
... MAX_LOCKDEP_KEYS: 8191
... CLASSHASH_SIZE: 4096
... MAX_LOCKDEP_ENTRIES: 16384
... MAX_LOCKDEP_CHAINS: 32768
... CHAINHASH_SIZE: 16384
memory used by lock dependency info: 3823 kB
per task-struct memory footprint: 1920 bytes
------------------------
| Locking API testsuite:
----------------------------------------------------------------------------
| spin |wlock |rlock |mutex | wsem | rsem |

--------------------------------------------------------------------------
A-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-B-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok |
A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok |
double unlock: ok | ok | ok | ok | ok | ok |
initialize held: ok | ok | ok | ok | ok | ok |
bad unlock order: ok | ok | ok | ok | ok | ok |

--------------------------------------------------------------------------
recursive read-lock: | ok | | ok |
recursive read-lock #2: | ok | | ok |
mixed read-write-lock: | ok | | ok |
mixed write-read-lock: | ok | | ok |

--------------------------------------------------------------------------
hard-irqs-on + irq-safe-A/12: ok | ok | ok |
soft-irqs-on + irq-safe-A/12: ok | ok | ok |
hard-irqs-on + irq-safe-A/21: ok | ok | ok |
soft-irqs-on + irq-safe-A/21: ok | ok | ok |
sirq-safe-A => hirqs-on/12: ok | ok | ok |
sirq-safe-A => hirqs-on/21: ok | ok | ok |
hard-safe-A + irqs-on/12: ok | ok | ok |
soft-safe-A + irqs-on/12: ok | ok | ok |
hard-safe-A + irqs-on/21: ok | ok | ok |
soft-safe-A + irqs-on/21: ok | ok | ok |
hard-safe-A + unsafe-B #1/123: ok | ok | ok |
soft-safe-A + unsafe-B #1/123: ok | ok | ok |
hard-safe-A + unsafe-B #1/132: ok | ok | ok |
soft-safe-A + unsafe-B #1/132: ok | ok | ok |
hard-safe-A + unsafe-B #1/213: ok | ok | ok |
soft-safe-A + unsafe-B #1/213: ok | ok | ok |
hard-safe-A + unsafe-B #1/231: ok | ok | ok |
soft-safe-A + unsafe-B #1/231: ok | ok | ok |
hard-safe-A + unsafe-B #1/312: ok | ok | ok |
soft-safe-A + unsafe-B #1/312: ok | ok | ok |
hard-safe-A + unsafe-B #1/321: ok | ok | ok |
soft-safe-A + unsafe-B #1/321: ok | ok | ok |
hard-safe-A + unsafe-B #2/123: ok | ok | ok |
soft-safe-A + unsafe-B #2/123: ok | ok | ok |
hard-safe-A + unsafe-B #2/132: ok | ok | ok |
soft-safe-A + unsafe-B #2/132: ok | ok | ok |
hard-safe-A + unsafe-B #2/213: ok | ok | ok |
soft-safe-A + unsafe-B #2/213: ok | ok | ok |
hard-safe-A + unsafe-B #2/231: ok | ok | ok |
soft-safe-A + unsafe-B #2/231: ok | ok | ok |
hard-safe-A + unsafe-B #2/312: ok | ok | ok |
soft-safe-A + unsafe-B #2/312: ok | ok | ok |
hard-safe-A + unsafe-B #2/321: ok | ok | ok |
soft-safe-A + unsafe-B #2/321: ok | ok | ok |
hard-irq lock-inversion/123: ok | ok | ok |
soft-irq lock-inversion/123: ok | ok | ok |
hard-irq lock-inversion/132: ok | ok | ok |
soft-irq lock-inversion/132: ok | ok | ok |
hard-irq lock-inversion/213: ok | ok | ok |
soft-irq lock-inversion/213: ok | ok | ok |
hard-irq lock-inversion/231: ok | ok | ok |
soft-irq lock-inversion/231: ok | ok | ok |
hard-irq lock-inversion/312: ok | ok | ok |
soft-irq lock-inversion/312: ok | ok | ok |
hard-irq lock-inversion/321: ok | ok | ok |
soft-irq lock-inversion/321: ok | ok | ok |
hard-irq read-recursion/123: ok |
soft-irq read-recursion/123: ok |
hard-irq read-recursion/132: ok |
soft-irq read-recursion/132: ok |
hard-irq read-recursion/213: ok |
soft-irq read-recursion/213: ok |
hard-irq read-recursion/231: ok |
soft-irq read-recursion/231: ok |
hard-irq read-recursion/312: ok |
soft-irq read-recursion/312: ok |
hard-irq read-recursion/321: ok |
soft-irq read-recursion/321: ok |
-------------------------------------------------------
Good, all 218 testcases passed! |
---------------------------------
Calibrating delay loop... 57.34 BogoMIPS (lpj=286720)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
Switching to clocksource microblaze_clocksource
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 6, 327680 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
audit: initializing netlink socket (disabled)
type=2000 audit(30.830:1): initialized
Slow work thread pool: Starting up
Slow work thread pool: Ready
msgmni has been set to 474
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
84000000.serial: ttyUL0 at MMIO 0x84000003 (irq = 8) is a uartlite
console [ttyUL0] enabled
brd: module loaded
Device Tree Probing 'ethernet'
xilinx_lltemac 81c00000.ethernet: MAC address is now 0: a:35: 0: 0: 0
xilinx_lltemac 81c00000.ethernet: XLlTemac: using DMA mode.
XLlTemac: Dma base address: phy: 0x84600180, virt: 0xd0014180
XLlTemac: buffer descriptor size: 32768 (0x8000)
XLlTemac: Allocating DMA descriptors with kmalloc
XLlTemac: (buffer_descriptor_init) phy: 0x9f8c0000, virt: 0xcf8c0000, size: 0x8000
XTemac: PHY detected at address 7.
eth0: Dropping NETIF_F_SG since no checksum feature.
xilinx_lltemac 81c00000.ethernet: eth0: Xilinx TEMAC at 0x81C00000 mapped to 0xD0010000, irq=5
TCP cubic registered
NET: Registered protocol family 17
Freeing unused kernel memory: 6232k freed
Mounting proc:
Mounting var:
Populating /var:
Running local start scripts.
Mounting sysfs:
Setting hostname:
Setting up interface lo:
Setting up interface eth0:
eth0: XLlTemac: Options: 0x3fa
eth0: XLlTemac: allocating interrupt 1 for dma mode tx.
eth0: XLlTemac: allocating interrupt 2 for dma mode rx.
eth0: XLlTemac: speed set to 100Mb/s
eth0: XLlTemac: Send Threshold = 24, Receive Threshold = 4
eth0: XLlTemac: Send Wait bound = 254, Receive Wait bound = 254
Starting syslogd:
Starting httpd:
Mounting nfs server

uclinux login: root
Password:
Login incorrect
uclinux login: root
Password:
#
#
# gunzip < /proc/config.gz >/tmp/.config
#
# cat /tmp/.config | grep LOCK | grep -v "^#"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_BLOCK=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_FILE_LOCKING=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
# cat /tmp/.config | grep TRACE | grep -v "^#"
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_TRACEPOINTS=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_GENERIC_TRACER=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_IRQSOFF_TRACER=y
#
#
# cd /
# mkdir debug
# mount -t debugfs none /debug
# cat /debug/tracing/available_tracers
irqsoff function sched_switch nop
# echo irqsoff > /debug/tracing/current_tracer

and kernel freeze. :-(

-- Steve

--
Michal Simek, Ing. (M.Eng)
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/
Microblaze U-BOOT custodian
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Dmitri Vorobiev: "Add missing header for HTC Dream framebuffer"
Previous message: AmÃrico Wang: "Re: [Patch] ipc: HARD_MSGMAX should be higher not lower on 64bit"
In reply to: Steven Rostedt: "Re: dynamic ftrace - graph"
Next in thread: Steven Rostedt: "Re: dynamic ftrace - graph"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]