Re: timer interrupt stucks using tickless kernel

[Christoph Lameter]

On Mon, 7 Dec 2009, Ioannis Kyriakopoulos wrote:

> I have configured my kernel (2.6.31.6) so that I get periodic ticks from
> the timer interrupt (i.e. tickless is not configured) with a rate determined
> by the HZ value. I've also checked the "high resolution timer support"
> and also SMP support. The posblem is that the timer is getting incremented
> very slowly (way slower than the HZ value), just like it would be if the
> kernel was tickless. Is there an explanation for that? How can I get
> periodic
> timer ticks?

This is what platform? Embedded? Timer is referring to the system time
running slow? kernel boot log would be useful.

> AFAI understand, the HPET timer is used through the IO-APIC controller to
> trigger the processors (N.B. if the "High Resolution Timer Support" option
> wasn't checked, the timer used would  be PIT, right?) and each processor's
> LAPIC timer is used for time keeping. Please correct me if I am wrong.
>
> Another question is how the LAPIC timner's rate is determined? In my case,
> it seams that an interurpt by LAPIC timer is generated very appoximately
> 0.25 sec (that is HZ which is 1000 * 4) but I can't understand why.

You could have 4 processors that each need a timer interrupt at
1000 HZ?

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/