REGRESSION for RT2561/RT61 in 2.6.32

[Alan Stern]

Sorry for the late notice; I haven't tried running new kernels on this 
computer in a long time.

When I use 2.6.32 (or indeed 2.6.32-rc1), it works fine up until the 
point where the wireless card is ifconfig'ed.  Then not long afterward 
(a few seconds to a minute) the system hangs.

# lspci -vv -s d.0
00:0d.0 Network controller: RaLink RT2561/RT61 802.11g PCI
        Subsystem: Linksys WMP54G ver 4.1
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at cfff0000 (32-bit, non-prefetchable) [size=32K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: rt61pci
        Kernel modules: rt61pci

While the system is hung, Alt-SysRq-keys still work but nothing else
shows up when I type (using a VT console, not X).  However I don't know
what debugging to do or what to look for.

Under 2.6.31 everything works okay.

Any help appreciated,

Alan Stern

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/