Re: [PATCH] HID: add multi-input quirk for NextWindow Touchscreen.

[Peter Korsgaard]

>>>>> "Peter" == Peter Hutterer <peter.hutterer@xxxxxxxxxx> writes:

Hi,

 Peter> it's a hack in userspace that works around wrong event
 Peter> reporting. So yes, it works if you're using evtouch but if you
 Peter> want to use any other driver that driver needs the same
 Peter> hack. treating Z as X and RX as Y doesn't work too well for a
 Peter> generic driver such as evdev, which has to deal with devices
 Peter> where RX is a valid axis.

Hmm, I don't see it sending Z / RX:

sudo evtest /dev/input/event12
Input driver version is 1.0.0
Input device ID: bus 0x3 vendor 0x1926 product 0x1 version 0x100
Input device name: "Nextwindow Touchscreen"
Supported events:
  Event type 0 (Sync)
  Event type 1 (Key)
    Event code 272 (LeftBtn)
    Event code 273 (RightBtn)
    Event code 274 (MiddleBtn)
  Event type 3 (Absolute)
    Event code 0 (X)
      Value      0
      Min        0
      Max    32767
    Event code 1 (Y)
      Value      0
      Min        0
      Max    32767
  Event type 4 (Misc)
    Event code 4 (ScanCode)
Testing ... (interrupt to exit)

sudo nwtool -u -i
Version:                2.91
Serial:                 233025
Model:                  1900
HW capabilities:        0x40
Rightclick delay:       1000 ms
Doubleclick time:       200 ms
Report mode:            1
Drag threshold:         500
Buzzer time:            40 ms
Buzzer tone:            40
Calibration key:        4
Calibration presses:    3

-- 
Bye, Peter Korsgaard
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/