Re: [PATCH 2/2 v2] pci: change PCI nomenclature in drivers/pci/(non-comment changes)

[Andrew Patterson]

On Thu, 2009-12-03 at 06:49 -0500, Stefan Assmann wrote:
> From: Stefan Assmann <sassmann@xxxxxxxxxx>
> 
> Changing occurrences of variants of PCI-X and PCIe to the PCI-SIG
> terms listed in the "Trademark and Logo Usage Guidelines".
> http://www.pcisig.com/developers/procedures/logos/Trademark_and_Logo_Usage_Guidelines_updated_112206.pdf
> 
> Patch is limited to drivers/pci/ and changes concern non-comment parts or
> anything that might be visible to the user.
> 
> Signed-off-by: Stefan Assmann <sassmann@xxxxxxxxxx>
> ---
>  drivers/pci/hotplug/pci_hotplug_core.c |   22 +++++++++++-----------
>  drivers/pci/pcie/aer/Kconfig.debug     |    4 ++--
>  drivers/pci/pcie/aer/aer_inject.c      |    2 +-
>  drivers/pci/pcie/aer/aerdrv_errprint.c |    4 ++--
>  drivers/pci/pcie/portdrv_pci.c         |    2 +-
>  5 files changed, 17 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c
> index 0325d98..38183a5 100644
> --- a/drivers/pci/hotplug/pci_hotplug_core.c
> +++ b/drivers/pci/hotplug/pci_hotplug_core.c
> @@ -68,26 +68,26 @@ static DEFINE_MUTEX(pci_hp_mutex);
>  static char *pci_bus_speed_strings[] = {
>  	"33 MHz PCI",		/* 0x00 */
>  	"66 MHz PCI",		/* 0x01 */
> -	"66 MHz PCIX", 		/* 0x02 */
> -	"100 MHz PCIX",		/* 0x03 */
> -	"133 MHz PCIX",		/* 0x04 */
> +	"66 MHz PCI-X",		/* 0x02 */
> +	"100 MHz PCI-X",	/* 0x03 */
> +	"133 MHz PCI-X",	/* 0x04 */
>  	NULL,			/* 0x05 */
>  	NULL,			/* 0x06 */
>  	NULL,			/* 0x07 */
>  	NULL,			/* 0x08 */
> -	"66 MHz PCIX 266",	/* 0x09 */
> -	"100 MHz PCIX 266",	/* 0x0a */
> -	"133 MHz PCIX 266",	/* 0x0b */
> +	"66 MHz PCI-X 266",	/* 0x09 */
> +	"100 MHz PCI-X 266",	/* 0x0a */
> +	"133 MHz PCI-X 266",	/* 0x0b */
>  	NULL,			/* 0x0c */
>  	NULL,			/* 0x0d */
>  	NULL,			/* 0x0e */
>  	NULL,			/* 0x0f */
>  	NULL,			/* 0x10 */
> -	"66 MHz PCIX 533",	/* 0x11 */
> -	"100 MHz PCIX 533",	/* 0x12 */
> -	"133 MHz PCIX 533",	/* 0x13 */
> -	"2.5 GT/s PCI-E",	/* 0x14 */
> -	"5.0 GT/s PCI-E",	/* 0x15 */
> +	"66 MHz PCI-X 533",	/* 0x11 */
> +	"100 MHz PCI-X 533",	/* 0x12 */
> +	"133 MHz PCI-X 533",	/* 0x13 */
> +	"2.5 GT/s PCIe",	/* 0x14 */
> +	"5.0 GT/s PCIe",	/* 0x15 */
>  };
>  
>  #ifdef CONFIG_HOTPLUG_PCI_CPCI
> diff --git a/drivers/pci/pcie/aer/Kconfig.debug b/drivers/pci/pcie/aer/Kconfig.debug
> index b8c925c..edfe756 100644
> --- a/drivers/pci/pcie/aer/Kconfig.debug
> +++ b/drivers/pci/pcie/aer/Kconfig.debug
> @@ -3,14 +3,14 @@
>  #
>  
>  config PCIEAER_INJECT
> -	tristate "PCIE AER error injector support"
> +	tristate "PCIe AER error injector support"
>  	depends on PCIEAER
>  	default n
>  	help
>  	  This enables PCI Express Root Port Advanced Error Reporting
>  	  (AER) software error injector.
>  
> -	  Debuging PCIE AER code is quite difficult because it is hard
> +	  Debuging PCIe AER code is quite difficult because it is hard

Why not fix the typo while changing this line.  "Debuging" shoud be
"Debugging".

>  	  to trigger various real hardware errors. Software based
>  	  error injection can fake almost all kinds of errors with the
>  	  help of a user space helper tool aer-inject, which can be
> diff --git a/drivers/pci/pcie/aer/aer_inject.c b/drivers/pci/pcie/aer/aer_inject.c
> index a21dee3..8e056f2 100644
> --- a/drivers/pci/pcie/aer/aer_inject.c
> +++ b/drivers/pci/pcie/aer/aer_inject.c
> @@ -462,5 +462,5 @@ static void __exit aer_inject_exit(void)
>  module_init(aer_inject_init);
>  module_exit(aer_inject_exit);
>  
> -MODULE_DESCRIPTION("PCIE AER software error injector");
> +MODULE_DESCRIPTION("PCIe AER software error injector");
>  MODULE_LICENSE("GPL");
> diff --git a/drivers/pci/pcie/aer/aerdrv_errprint.c b/drivers/pci/pcie/aer/aerdrv_errprint.c
> index 44acde7..9d3e4c8 100644
> --- a/drivers/pci/pcie/aer/aerdrv_errprint.c
> +++ b/drivers/pci/pcie/aer/aerdrv_errprint.c
> @@ -184,7 +184,7 @@ void aer_print_error(struct pci_dev *dev, struct aer_err_info *info)
>  
>  	if (info->status == 0) {
>  		AER_PR(info, dev,
> -			"PCIE Bus Error: severity=%s, type=Unaccessible, "
> +			"PCIe Bus Error: severity=%s, type=Unaccessible, "
>  			"id=%04x(Unregistered Agent ID)\n",
>  			aer_error_severity_string[info->severity], id);
>  	} else {
> @@ -194,7 +194,7 @@ void aer_print_error(struct pci_dev *dev, struct aer_err_info *info)
>  		agent = AER_GET_AGENT(info->severity, info->status);
>  
>  		AER_PR(info, dev,
> -			"PCIE Bus Error: severity=%s, type=%s, id=%04x(%s)\n",
> +			"PCIe Bus Error: severity=%s, type=%s, id=%04x(%s)\n",
>  			aer_error_severity_string[info->severity],
>  			aer_error_layer[layer], id, aer_agent_string[agent]);
>  
> diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
> index f635e47..6788d0f 100644
> --- a/drivers/pci/pcie/portdrv_pci.c
> +++ b/drivers/pci/pcie/portdrv_pci.c
> @@ -24,7 +24,7 @@
>   */
>  #define DRIVER_VERSION "v1.0"
>  #define DRIVER_AUTHOR "tom.l.nguyen@xxxxxxxxx"
> -#define DRIVER_DESC "PCIE Port Bus Driver"
> +#define DRIVER_DESC "PCIe Port Bus Driver"
>  MODULE_AUTHOR(DRIVER_AUTHOR);
>  MODULE_DESCRIPTION(DRIVER_DESC);
>  MODULE_LICENSE("GPL");


-- 
Andrew Patterson
Hewlett-Packard

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/