Re: [PATCH] PCI: Always set prefetchable base/limit upper32 registers

From: Yinghai Lu
Date: Mon Nov 30 2009 - 21:27:44 EST


Alex Williamson wrote:
> On Mon, 2009-11-30 at 16:00 -0800, Yinghai Lu wrote:
>> Alex Williamson wrote:
>>
>>> Ah, I think I see where you're going. We only set IORESOURCE_MEM_64 if
>>> base <= limit, ie. the BIOS has programmed the prefetchable range. This
>>> is not a requirement by the PCI spec. In my case the BIOS has left base
>>>> limit, just as Linux would do if it disabled the range, so we never
>>> set this flag.
>>>
>>>> setup-bus.c::pci_bridge_check_ranges()
>>> This is only checking that the upper 32bits is actually implemented,
>>> should we have already set the IORESOURCE_MEM_64 from the function
>>> above, which we haven't.
>>>
>>> So, in my case I have a 64bit capable prefetchable range, that the BIOS
>>> has not programmed and is not required to program. We assign it to a
>>> 32bit window, and never touch the UPPER32 registers.
>> no.
>>
>> before assign range to that resource.
>> pci_bridge_check_ranges is called, it will check those two bit to make sure that is set correcly
>>
>> if (pmem) {
>> b_res[2].flags |= IORESOURCE_MEM | IORESOURCE_PREFETCH;
>> if ((pmem & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64)
>> b_res[2].flags |= IORESOURCE_MEM_64;
>> }
>
> Ok, sorry I missed this. Yes, this is getting called, but when we get
> back to pci_setup_bridge() that flag is missing IORESOURCE_MEM_64.
> Perhaps these are different resources? I'm still tracing the code to
> find out what happened to that flag.
>
> Also, I'm running 64bit(x86_64), and if lspci is wrong, then so is
> setpci. I don't think there's an "ignore upper32" anywhere, so the
> result of 0xffffffffabc00000 - 0x00000000abc00000 is that base > limit
> thus the range is disabled at the bridge and the ROM resource we
> assigned into the window behind the bridge is inaccessible.

can you check

---
drivers/pci/setup-bus.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)

Index: linux-2.6/drivers/pci/setup-bus.c
===================================================================
--- linux-2.6.orig/drivers/pci/setup-bus.c
+++ linux-2.6/drivers/pci/setup-bus.c
@@ -397,10 +397,17 @@ static void pci_bridge_check_ranges(stru
pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
0xffffffff);
pci_read_config_dword(bridge, PCI_PREF_BASE_UPPER32, &tmp);
- if (!tmp)
+ if (!tmp) {
b_res[2].flags &= ~IORESOURCE_MEM_64;
- pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
- mem_base_hi);
+ dev_info(&bridge->dev, "%pR MEM_64 clearred\n", &b_res[2]);
+ /* not sure if we can clear it */
+ pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
+ 0);
+ pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32,
+ 0);
+ } else
+ pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
+ mem_base_hi);
}
}

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/