Re: 2.6.32-rc8: amd64_edac slub error

From: Randy Dunlap
Date: Mon Nov 30 2009 - 17:48:52 EST

Next message: Linus Torvalds: "Re: [rfc] "fair" rw spinlocks"
Previous message: Benjamin Herrenschmidt: "[git pull] Please pull powerpc.git merge branch"
In reply to: Randy Dunlap: "Re: 2.6.32-rc8: amd64_edac slub error"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Mon, 30 Nov 2009 21:35:47 +0100 Borislav Petkov wrote:

> Hi Randy,
>
> On Mon, Nov 30, 2009 at 09:28:19AM -0800, Randy Dunlap wrote:
> > Loading amd64_edac_mod on an amd64 system without the expected hardware support
> > causes memory usage error(s).
>
> Well, this is new!
>
> > Is this already fixed/patched? Do you need more info?
>
> Nope :(.
>
> I've tried to reproduce it here by selecting CONFIG_SLUB no success.
> Please send me your config.
>
> Also, it would be very helpful if you could enable CONFIG_EDAC_DEBUG and
> run it again.
>
> From looking at the error trace, though, it looks like we're
> not allocating enough memory for the struct msr things in
> amd64_nb_mce_bank_enabled_on_node(). This is just a hunch though and you
> could give the following debug patch a try:

Full boot log is attached. Thanks.

---
~Randy
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-rc8 (rdunlap@xxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-44)) #2 SMP Tue Nov 24 14:00:39 PST 2009
Command line: ro root=/dev/cciss/c0d0p3 console=tty0 console=ttyS0,115200n8 netconsole=50000@xxxxxxxxxxxxx/eth0,50000@xxxxxxxxxxxxx/00:18:FE:34:1C:3D nmi_watchdog=2 selinux=0 debug ignore_loglevel initcall_debug print_fatal_signals=1 slub_debug=FPZ
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fe50000 (usable)
BIOS-e820: 000000007fe50000 - 000000007fe58000 (ACPI data)
BIOS-e820: 000000007fe58000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000027ffff000 (usable)
debug: ignoring loglevel setting.
DMI 2.3 present.
last_pfn = 0x27ffff max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-back
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000280000000 aka 10240M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000080000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0x7fe50 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-000000007fe50000
0000000000 - 007fe00000 page 2M
007fe00000 - 007fe50000 page 4k
kernel direct mapping tables up to 7fe50000 @ 8000-c000
init_memory_mapping: 0000000100000000-000000027ffff000
0100000000 - 027fe00000 page 2M
027fe00000 - 027ffff000 page 4k
kernel direct mapping tables up to 27ffff000 @ a000-16000
RAMDISK: 37eac000 - 37fef108
ACPI: RSDP 00000000000f4f00 00024 (v02 HP )
ACPI: XSDT 000000007fe50780 0005C (v01 HP A08 00000002 Ò? 0000162E)
ACPI: FACP 000000007fe50800 000F4 (v03 HP A08 00000002 Ò? 0000162E)
ACPI: DSDT 000000007fe50900 03F75 (v01 HP DSDT 00000001 INTL 20030228)
ACPI: FACS 000000007fe50100 00040
ACPI: SPCR 000000007fe50140 00050 (v01 HP SPCRRBSU 00000001 Ò? 0000162E)
ACPI: MCFG 000000007fe501c0 0003C (v01 HP ProLiant 00000001 00000000)
ACPI: HPET 000000007fe50200 00038 (v01 HP A08 00000002 Ò? 0000162E)
ACPI: SPMI 000000007fe50240 00040 (v05 HP ProLiant 00000001 Ò? 0000162E)
ACPI: APIC 000000007fe50280 000DE (v01 HP 00000083 00000002 00000000)
ACPI: SRAT 000000007fe50380 00110 (v01 AMD HAMMER 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 1 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 1
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 100000-80000000
SRAT: Node 0 PXM 0 100000000-180000000
SRAT: Node 1 PXM 1 180000000-280000000
NUMA: Allocated memnodemap from 11000 - 16040
NUMA: Using 20 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000180000000
NODE_DATA [0000000000016040 - 000000000002c03f]
bootmap [000000000002d000 - 000000000005cfff] pages 30
(9 early reservations) ==> bootmem [0000000000 - 0180000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0001a549d8] TEXT DATA BSS ==> [0001000000 - 0001a549d8]
#3 [0037eac000 - 0037fef108] RAMDISK ==> [0037eac000 - 0037fef108]
#4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
#5 [0001a55000 - 0001a5510c] BRK ==> [0001a55000 - 0001a5510c]
#6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
#7 [000000a000 - 0000011000] PGTABLE ==> [000000a000 - 0000011000]
#8 [0000011000 - 0000016040] MEMNODEMAP ==> [0000011000 - 0000016040]
Bootmem setup node 1 0000000180000000-000000027ffff000
NODE_DATA [0000000180000000 - 0000000180015fff]
bootmap [0000000180016000 - 0000000180035fff] pages 20
(9 early reservations) ==> bootmem [0180000000 - 027ffff000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0001000000 - 0001a549d8] TEXT DATA BSS
#3 [0037eac000 - 0037fef108] RAMDISK
#4 [000009f400 - 0000100000] BIOS reserved
#5 [0001a55000 - 0001a5510c] BRK
#6 [0000008000 - 000000a000] PGTABLE
#7 [000000a000 - 0000011000] PGTABLE
#8 [0000011000 - 0000016040] MEMNODEMAP
found SMP MP-table at [ffff8800000f4f80] f4f80
[ffffea0000000000-ffffea00053fffff] PMD -> [ffff880001c00000-ffff8800053fffff] on node 0
[ffffea0005400000-ffffea0008bfffff] PMD -> [ffff880180200000-ffff8801839fffff] on node 1
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0027ffff
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0007fe50
0: 0x00100000 -> 0x00180000
1: 0x00180000 -> 0x0027ffff
On node 0 totalpages: 1048047
DMA zone: 56 pages used for memmap
DMA zone: 113 pages reserved
DMA zone: 3830 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 505480 pages, LIFO batch:31
Normal zone: 7168 pages used for memmap
Normal zone: 517120 pages, LIFO batch:31
On node 1 totalpages: 1048575
Normal zone: 14336 pages used for memmap
Normal zone: 1034239 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xf7df0000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 17, address 0xf7df0000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfdef0000] gsi_base[38])
IOAPIC[1]: apic_id 9, version 17, address 0xfdef0000, GSI 38-61
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 62
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 000000007fe50000 - 000000007fe58000
PM: Registered nosave memory: 000000007fe58000 - 0000000080000000
PM: Registered nosave memory: 0000000080000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000
PM: Registered nosave memory: 00000000fee10000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:2
PERCPU: Embedded 30 pages/cpu @ffff880005600000 s91224 r8192 d23464 u1048576
pcpu-alloc: s91224 r8192 d23464 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 2 [1] 1 3
Built 2 zonelists in Zone order, mobility grouping on. Total pages: 2060669
Policy zone: Normal
Kernel command line: ro root=/dev/cciss/c0d0p3 console=tty0 console=ttyS0,115200n8 netconsole=50000@xxxxxxxxxxxxx/eth0,50000@xxxxxxxxxxxxx/00:18:FE:34:1C:3D nmi_watchdog=2 selinux=0 debug ignore_loglevel initcall_debug print_fatal_signals=1 slub_debug=FPZ
PID hash table entries: 4096 (order: 3, 32768 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
Node 0: aperture @ c000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
PM: Registered nosave memory: 0000000020000000 - 0000000024000000
Memory: 8193176k/10485756k available (4275k kernel code, 2099268k absent, 193312k reserved, 3924k data, 936k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=2
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:1024
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
allocated 83886080 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Fast TSC calibration using PIT
Detected 2612.060 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5224.12 BogoMIPS (lpj=2612060)
Security Framework initialized
SELinux: Disabled at boot.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0x0 -> Node 0
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
using C1E aware idle routine
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 26435 entries in 104 pages
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02
calling migration_init+0x0/0x5a @ 1
initcall migration_init+0x0/0x5a returned 0 after 0 usecs
calling spawn_ksoftirqd+0x0/0x59 @ 1
initcall spawn_ksoftirqd+0x0/0x59 returned 0 after 0 usecs
calling init_call_single_data+0x0/0x87 @ 1
initcall init_call_single_data+0x0/0x87 returned 0 after 0 usecs
calling spawn_softlockup_task+0x0/0x75 @ 1
initcall spawn_softlockup_task+0x0/0x75 returned 0 after 0 usecs
calling relay_init+0x0/0x14 @ 1
initcall relay_init+0x0/0x14 returned 0 after 0 usecs
calling tracer_alloc_buffers+0x0/0x1f6 @ 1
initcall tracer_alloc_buffers+0x0/0x1f6 returned 0 after 0 usecs
calling init_trace_printk+0x0/0x12 @ 1
initcall init_trace_printk+0x0/0x12 returned 0 after 0 usecs
calling trace_workqueue_early_init+0x0/0x108 @ 1
initcall trace_workqueue_early_init+0x0/0x108 returned 0 after 0 usecs
calling mce_amd_init+0x0/0x33 @ 1
initcall mce_amd_init+0x0/0x33 returned 0 after 0 usecs
Booting processor 1 APIC 0x2 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5223.81 BogoMIPS (lpj=2611909)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1/0x2 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU1: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02
Booting processor 2 APIC 0x1 ip 0x6000
Initializing CPU#2
Calibrating delay using timer specific routine.. 5223.79 BogoMIPS (lpj=2611895)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 2/0x1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU2: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02
Booting processor 3 APIC 0x3 ip 0x6000
Initializing CPU#3
Calibrating delay using timer specific routine.. 5223.82 BogoMIPS (lpj=2611914)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 3/0x3 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU3: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02
Brought up 4 CPUs
Total of 4 processors activated (20895.55 BogoMIPS).
Testing NMI watchdog ... OK.
CPU0 attaching sched-domain:
domain 0: span 0,2 level MC
groups: 0 2
domain 1: span 0-3 level NODE
groups: 0,2 (cpu_power = 2048) 1,3 (cpu_power = 2048)
CPU1 attaching sched-domain:
domain 0: span 1,3 level MC
groups: 1 3
domain 1: span 0-3 level NODE
groups: 1,3 (cpu_power = 2048) 0,2 (cpu_power = 2048)
CPU2 attaching sched-domain:
domain 0: span 0,2 level MC
groups: 2 0
domain 1: span 0-3 level NODE
groups: 0,2 (cpu_power = 2048) 1,3 (cpu_power = 2048)
CPU3 attaching sched-domain:
domain 0: span 1,3 level MC
groups: 3 1
domain 1: span 0-3 level NODE
groups: 1,3 (cpu_power = 2048) 0,2 (cpu_power = 2048)
calling init_mmap_min_addr+0x0/0x26 @ 1
initcall init_mmap_min_addr+0x0/0x26 returned 0 after 0 usecs
calling init_cpufreq_transition_notifier_list+0x0/0x1b @ 1
initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 usecs
calling net_ns_init+0x0/0xc8 @ 1
initcall net_ns_init+0x0/0xc8 returned 0 after 0 usecs
calling e820_mark_nvs_memory+0x0/0x41 @ 1
initcall e820_mark_nvs_memory+0x0/0x41 returned 0 after 0 usecs
calling cpufreq_tsc+0x0/0x28 @ 1
initcall cpufreq_tsc+0x0/0x28 returned 0 after 0 usecs
calling pci_reboot_init+0x0/0x14 @ 1
initcall pci_reboot_init+0x0/0x14 returned 0 after 0 usecs
calling init_lapic_sysfs+0x0/0x2d @ 1
initcall init_lapic_sysfs+0x0/0x2d returned 0 after 0 usecs
calling init_smp_flush+0x0/0x26 @ 1
initcall init_smp_flush+0x0/0x26 returned 0 after 0 usecs
calling alloc_frozen_cpus+0x0/0xd @ 1
initcall alloc_frozen_cpus+0x0/0xd returned 0 after 0 usecs
calling sysctl_init+0x0/0x16 @ 1
initcall sysctl_init+0x0/0x16 returned 0 after 0 usecs
calling ksysfs_init+0x0/0xbb @ 1
initcall ksysfs_init+0x0/0xbb returned 0 after 0 usecs
calling async_init+0x0/0x61 @ 1
initcall async_init+0x0/0x61 returned 0 after 0 usecs
calling init_jiffies_clocksource+0x0/0x12 @ 1
initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 usecs
calling pm_init+0x0/0x34 @ 1
initcall pm_init+0x0/0x34 returned 0 after 0 usecs
calling pm_disk_init+0x0/0x19 @ 1
initcall pm_disk_init+0x0/0x19 returned 0 after 0 usecs
calling swsusp_header_init+0x0/0x31 @ 1
initcall swsusp_header_init+0x0/0x31 returned 0 after 0 usecs
calling init_zero_pfn+0x0/0x35 @ 1
initcall init_zero_pfn+0x0/0x35 returned 0 after 0 usecs
calling filelock_init+0x0/0x2e @ 1
initcall filelock_init+0x0/0x2e returned 0 after 0 usecs
calling init_misc_binfmt+0x0/0x41 @ 1
initcall init_misc_binfmt+0x0/0x41 returned 0 after 0 usecs
calling init_script_binfmt+0x0/0x14 @ 1
initcall init_script_binfmt+0x0/0x14 returned 0 after 0 usecs
calling init_elf_binfmt+0x0/0x14 @ 1
initcall init_elf_binfmt+0x0/0x14 returned 0 after 0 usecs
calling init_compat_elf_binfmt+0x0/0x14 @ 1
initcall init_compat_elf_binfmt+0x0/0x14 returned 0 after 0 usecs
calling debugfs_init+0x0/0x5a @ 1
initcall debugfs_init+0x0/0x5a returned 0 after 0 usecs
calling securityfs_init+0x0/0x51 @ 1
initcall securityfs_init+0x0/0x51 returned 0 after 0 usecs
calling random32_init+0x0/0xd1 @ 1
initcall random32_init+0x0/0xd1 returned 0 after 0 usecs
calling gnttab_init+0x0/0x16e @ 1
initcall gnttab_init+0x0/0x16e returned -19 after 0 usecs
calling regulator_init+0x0/0x2e @ 1
regulator: core version 0.5
initcall regulator_init+0x0/0x2e returned 0 after 976 usecs
calling early_resume_init+0x0/0x1a0 @ 1
Time: 14:59:57 Date: 11/30/09
initcall early_resume_init+0x0/0x1a0 returned 0 after 976 usecs
calling cpufreq_core_init+0x0/0x8c @ 1
initcall cpufreq_core_init+0x0/0x8c returned 0 after 0 usecs
calling cpuidle_init+0x0/0x40 @ 1
initcall cpuidle_init+0x0/0x40 returned 0 after 0 usecs
calling sock_init+0x0/0x5e @ 1
initcall sock_init+0x0/0x5e returned 0 after 0 usecs
calling net_inuse_init+0x0/0x26 @ 1
initcall net_inuse_init+0x0/0x26 returned 0 after 0 usecs
calling netpoll_init+0x0/0x31 @ 1
initcall netpoll_init+0x0/0x31 returned 0 after 0 usecs
calling netlink_proto_init+0x0/0x14c @ 1
NET: Registered protocol family 16
initcall netlink_proto_init+0x0/0x14c returned 0 after 976 usecs
calling bdi_class_init+0x0/0x41 @ 1
initcall bdi_class_init+0x0/0x41 returned 0 after 0 usecs
calling kobject_uevent_init+0x0/0x54 @ 1
initcall kobject_uevent_init+0x0/0x54 returned 0 after 0 usecs
calling pcibus_class_init+0x0/0x19 @ 1
initcall pcibus_class_init+0x0/0x19 returned 0 after 0 usecs
calling pci_driver_init+0x0/0x12 @ 1
initcall pci_driver_init+0x0/0x12 returned 0 after 0 usecs
calling backlight_class_init+0x0/0x5d @ 1
initcall backlight_class_init+0x0/0x5d returned 0 after 0 usecs
calling xenbus_probe_init+0x0/0x10a @ 1
initcall xenbus_probe_init+0x0/0x10a returned -19 after 0 usecs
calling tty_class_init+0x0/0x38 @ 1
initcall tty_class_init+0x0/0x38 returned 0 after 0 usecs
calling vtconsole_class_init+0x0/0xc3 @ 1
initcall vtconsole_class_init+0x0/0xc3 returned 0 after 0 usecs
calling register_node_type+0x0/0x6b @ 1
initcall register_node_type+0x0/0x6b returned 0 after 0 usecs
calling amd_postcore_init+0x0/0x885 @ 1
node 0 link 1: io port [1000, 3fff]
node 1 link 2: io port [4000, ffff]
TOM: 0000000080000000 aka 2048M
node 0 link 1: mmio [e8000000, fddfffff]
node 1 link 2: mmio [fde00000, fdffffff]
node 0 link 1: mmio [80000000, 83ffffff]
node 1 link 2: mmio [84000000, 8fffffff]
node 0 link 1: mmio [a0000, bffff]
TOM2: 0000000280000000 aka 10240M
bus: [00,3f] on node 0 link 1
bus: 00 index 0 io port: [0, 3fff]
bus: 00 index 1 mmio: [90000000, fddfffff]
bus: 00 index 2 mmio: [80000000, 83ffffff]
bus: 00 index 3 mmio: [a0000, bffff]
bus: 00 index 4 mmio: [fe000000, ffffffff]
bus: 00 index 5 mmio: [280000000, fcffffffff]
bus: [40,ff] on node 1 link 2
bus: 40 index 0 io port: [4000, ffff]
bus: 40 index 1 mmio: [fde00000, fdffffff]
bus: 40 index 2 mmio: [84000000, 8fffffff]
initcall amd_postcore_init+0x0/0x885 returned 0 after 23437 usecs
calling arch_kdebugfs_init+0x0/0x242 @ 1
initcall arch_kdebugfs_init+0x0/0x242 returned 0 after 0 usecs
calling mtrr_if_init+0x0/0x63 @ 1
initcall mtrr_if_init+0x0/0x63 returned 0 after 0 usecs
calling ffh_cstate_init+0x0/0x2a @ 1
initcall ffh_cstate_init+0x0/0x2a returned -1 after 0 usecs
initcall ffh_cstate_init+0x0/0x2a returned with error code -1
calling arch_init_ftrace_syscalls+0x0/0xfd @ 1
initcall arch_init_ftrace_syscalls+0x0/0xfd returned 0 after 976 usecs
calling acpi_pci_init+0x0/0x5c @ 1
ACPI: bus type pci registered
initcall acpi_pci_init+0x0/0x5c returned 0 after 976 usecs
calling setup_vcpu_hotplug_event+0x0/0x22 @ 1
initcall setup_vcpu_hotplug_event+0x0/0x22 returned -19 after 0 usecs
calling dmi_id_init+0x0/0x31a @ 1
initcall dmi_id_init+0x0/0x31a returned 0 after 976 usecs
calling dma_bus_init+0x0/0x3f @ 1
initcall dma_bus_init+0x0/0x3f returned 0 after 0 usecs
calling dma_channel_table_init+0x0/0xbf @ 1
initcall dma_channel_table_init+0x0/0xbf returned 0 after 0 usecs
calling pci_arch_init+0x0/0x57 @ 1
PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
PCI: HP ProLiant BL685c G1 detected, enabling pci=bfsort.
initcall pci_arch_init+0x0/0x57 returned 0 after 3906 usecs
calling topology_init+0x0/0x86 @ 1
initcall topology_init+0x0/0x86 returned 0 after 976 usecs
calling mtrr_init_finialize+0x0/0x3d @ 1
initcall mtrr_init_finialize+0x0/0x3d returned 0 after 0 usecs
calling param_sysfs_init+0x0/0x216 @ 1
initcall param_sysfs_init+0x0/0x216 returned 0 after 3906 usecs
calling pm_sysrq_init+0x0/0x1e @ 1
initcall pm_sysrq_init+0x0/0x1e returned 0 after 0 usecs
calling audit_watch_init+0x0/0x2f @ 1
initcall audit_watch_init+0x0/0x2f returned 0 after 0 usecs
calling init_slow_work+0x0/0x37 @ 1
initcall init_slow_work+0x0/0x37 returned 0 after 0 usecs
calling default_bdi_init+0x0/0xb6 @ 1
initcall default_bdi_init+0x0/0xb6 returned 0 after 0 usecs
calling init_bio+0x0/0xd3 @ 1
bio: create slab <bio-0> at 0
initcall init_bio+0x0/0xd3 returned 0 after 976 usecs
calling fsnotify_init+0x0/0x12 @ 1
initcall fsnotify_init+0x0/0x12 returned 0 after 0 usecs
calling fsnotify_notification_init+0x0/0x68 @ 1
initcall fsnotify_notification_init+0x0/0x68 returned 0 after 0 usecs
calling cryptomgr_init+0x0/0x12 @ 1
initcall cryptomgr_init+0x0/0x12 returned 0 after 0 usecs
calling blk_settings_init+0x0/0x2a @ 1
initcall blk_settings_init+0x0/0x2a returned 0 after 0 usecs
calling blk_ioc_init+0x0/0x2a @ 1
initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs
calling blk_softirq_init+0x0/0x6e @ 1
initcall blk_softirq_init+0x0/0x6e returned 0 after 0 usecs
calling blk_iopoll_setup+0x0/0x6e @ 1
initcall blk_iopoll_setup+0x0/0x6e returned 0 after 0 usecs
calling genhd_device_init+0x0/0x66 @ 1
initcall genhd_device_init+0x0/0x66 returned 0 after 0 usecs
calling blk_dev_integrity_init+0x0/0x2a @ 1
initcall blk_dev_integrity_init+0x0/0x2a returned 0 after 0 usecs
calling pci_slot_init+0x0/0x4a @ 1
initcall pci_slot_init+0x0/0x4a returned 0 after 0 usecs
calling fbmem_init+0x0/0x98 @ 1
initcall fbmem_init+0x0/0x98 returned 0 after 0 usecs
calling acpi_init+0x0/0x262 @ 1
ACPI: EC: Look up EC in DSDT
ACPI: SSDT 000000007fe58000 004F0 (v02 HP PNOWSSDT 00000002 HP 00000001)
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255
PCI: MCFG area at 80000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at 80000000 - 8fffffff
initcall acpi_init+0x0/0x262 returned 0 after 50781 usecs
calling dock_init+0x0/0x8d @ 1
ACPI: No dock devices found.
initcall dock_init+0x0/0x8d returned 0 after 976 usecs
calling acpi_pci_root_init+0x0/0x28 @ 1
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 32bit mmio: [0xf7de0000-0xf7de0fff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10 32bit mmio: [0xf7dd0000-0xf7dd00ff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: PME# disabled
pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0e.0: PME# disabled
PCI: peer root bus 00 res updated from pci conf
pci 0000:01:03.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff]
pci 0000:01:03.0: reg 14 io port: [0x1000-0x10ff]
pci 0000:01:03.0: reg 18 32bit mmio: [0xf7ff0000-0xf7ffffff]
pci 0000:01:03.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:01:03.0: supports D1 D2
pci 0000:01:04.0: reg 10 io port: [0x2800-0x28ff]
pci 0000:01:04.0: reg 14 32bit mmio: [0xf7fe0000-0xf7fe01ff]
pci 0000:01:04.0: PME# supported from D0 D3hot D3cold
pci 0000:01:04.0: PME# disabled
pci 0000:01:04.2: reg 10 io port: [0x1400-0x14ff]
pci 0000:01:04.2: reg 14 32bit mmio: [0xf7fd0000-0xf7fd07ff]
pci 0000:01:04.2: reg 18 32bit mmio: [0xf7fc0000-0xf7fc3fff]
pci 0000:01:04.2: reg 1c 32bit mmio: [0xf7f00000-0xf7f7ffff]
pci 0000:01:04.2: reg 30 32bit mmio pref: [0x000000-0x00ffff]
pci 0000:01:04.2: PME# supported from D0 D3hot D3cold
pci 0000:01:04.2: PME# disabled
pci 0000:01:04.4: reg 20 io port: [0x1800-0x181f]
pci 0000:01:04.4: PME# supported from D0 D3hot D3cold
pci 0000:01:04.4: PME# disabled
pci 0000:01:04.6: reg 10 32bit mmio: [0xf7ef0000-0xf7ef00ff]
pci 0000:01:04.6: PME# supported from D0 D3hot D3cold
pci 0000:01:04.6: PME# disabled
pci 0000:00:09.0: transparent bridge
pci 0000:00:09.0: bridge io port: [0x1000-0x2fff]
pci 0000:00:09.0: bridge 32bit mmio: [0xf7e00000-0xf7ffffff]
pci 0000:00:09.0: bridge 32bit mmio pref: [0xe8000000-0xefffffff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:0b.0: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:03:00.0: reg 10 64bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:03:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:02:00.0: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:0c.0: bridge 32bit mmio: [0xfa000000-0xfbffffff]
pci 0000:05:00.0: reg 10 64bit mmio: [0xfa000000-0xfbffffff]
pci 0000:05:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:05:00.0: PME# supported from D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:04:00.0: bridge 32bit mmio: [0xfa000000-0xfbffffff]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:0d.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
pci 0000:07:04.0: reg 10 64bit mmio: [0xfdcf0000-0xfdcfffff]
pci 0000:07:04.0: reg 18 64bit mmio: [0xfdce0000-0xfdceffff]
pci 0000:07:04.0: PME# supported from D3hot D3cold
pci 0000:07:04.0: PME# disabled
pci 0000:07:04.1: reg 10 64bit mmio: [0xfdcd0000-0xfdcdffff]
pci 0000:07:04.1: reg 18 64bit mmio: [0xfdcc0000-0xfdccffff]
pci 0000:07:04.1: PME# supported from D3hot D3cold
pci 0000:07:04.1: PME# disabled
pci 0000:06:00.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
pci 0000:08:00.0: reg 10 64bit mmio: [0xfddf0000-0xfddf0fff]
pci 0000:08:00.0: reg 18 64bit mmio: [0xfdde0000-0xfdde00ff]
pci 0000:08:00.0: reg 20 io port: [0x3000-0x30ff]
pci 0000:08:00.0: reg 30 32bit mmio pref: [0x000000-0x03ffff]
pci 0000:08:00.1: reg 10 64bit mmio: [0xfddd0000-0xfddd0fff]
pci 0000:08:00.1: reg 18 64bit mmio: [0xfddc0000-0xfddc00ff]
pci 0000:08:00.1: reg 20 io port: [0x3400-0x34ff]
pci 0000:08:00.1: reg 30 32bit mmio pref: [0x000000-0x03ffff]
pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:0e.0: bridge io port: [0x3000-0x3fff]
pci 0000:00:0e.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE1.NB01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE2.NC1B._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE3.NC2B._PRT]
ACPI: PCI Root Bridge [PCI1] (0000:40)
pci 0000:40:01.0: reg 14 32bit mmio: [0xfdef0000-0xfdef0fff]
pci 0000:40:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:40:0c.0: PME# disabled
pci 0000:40:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:40:0d.0: PME# disabled
pci 0000:40:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:40:0e.0: PME# disabled
PCI: peer root bus 40 res updated from pci conf
pci 0000:41:00.0: PME# supported from D0 D3hot D3cold
pci 0000:41:00.0: PME# disabled
pci 0000:41:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:40:0c.0: bridge io port: [0x4000-0x4fff]
pci 0000:40:0c.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
pci 0000:42:08.0: reg 10 64bit mmio: [0xfdf80000-0xfdffffff]
pci 0000:42:08.0: reg 18 io port: [0x4000-0x40ff]
pci 0000:42:08.0: reg 1c 32bit mmio: [0xfdf70000-0xfdf77fff]
pci 0000:42:08.0: reg 30 32bit mmio pref: [0x000000-0x003fff]
pci 0000:42:08.0: supports D1
pci 0000:41:00.0: bridge io port: [0x4000-0x4fff]
pci 0000:41:00.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE2.SASB._PRT]
initcall acpi_pci_root_init+0x0/0x28 returned 0 after 146484 usecs
calling acpi_pci_link_init+0x0/0x43 @ 1
ACPI: PCI Interrupt Link [LNKW] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LNKX] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [LNKY] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [LNKZ] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [LNU0] (IRQs 22) *5
ACPI: PCI Interrupt Link [LNU2] (IRQs 23) *7
ACPI: PCI Interrupt Link [LNKA] (IRQs 54) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 55) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 56) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 57) *0, disabled.
initcall acpi_pci_link_init+0x0/0x43 returned 0 after 33203 usecs
calling pnp_init+0x0/0x12 @ 1
initcall pnp_init+0x0/0x12 returned 0 after 0 usecs
calling setup_shutdown_event+0x0/0x14 @ 1
initcall setup_shutdown_event+0x0/0x14 returned 0 after 0 usecs
calling balloon_init+0x0/0x1c3 @ 1
initcall balloon_init+0x0/0x1c3 returned -19 after 0 usecs
calling misc_init+0x0/0xb8 @ 1
initcall misc_init+0x0/0xb8 returned 0 after 0 usecs
calling vga_arb_device_init+0x0/0x78 @ 1
vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
initcall vga_arb_device_init+0x0/0x78 returned 0 after 1953 usecs
calling cn_init+0x0/0xf3 @ 1
initcall cn_init+0x0/0xf3 returned 0 after 0 usecs
calling init_scsi+0x0/0x91 @ 1
SCSI subsystem initialized
initcall init_scsi+0x0/0x91 returned 0 after 976 usecs
calling ata_init+0x0/0x33f @ 1
libata version 3.00 loaded.
initcall ata_init+0x0/0x33f returned 0 after 976 usecs
calling phy_init+0x0/0x31 @ 1
initcall phy_init+0x0/0x31 returned 0 after 0 usecs
calling init_pcmcia_cs+0x0/0x25 @ 1
initcall init_pcmcia_cs+0x0/0x25 returned 0 after 0 usecs
calling usb_init+0x0/0x1a8 @ 1
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
initcall usb_init+0x0/0x1a8 returned 0 after 2929 usecs
calling serio_init+0x0/0x89 @ 1
initcall serio_init+0x0/0x89 returned 0 after 0 usecs
calling input_init+0x0/0x133 @ 1
initcall input_init+0x0/0x133 returned 0 after 0 usecs
calling rtc_init+0x0/0x71 @ 1
initcall rtc_init+0x0/0x71 returned 0 after 0 usecs
calling power_supply_class_init+0x0/0x38 @ 1
initcall power_supply_class_init+0x0/0x38 returned 0 after 0 usecs
calling hwmon_init+0x0/0x10d @ 1
initcall hwmon_init+0x0/0x10d returned 0 after 0 usecs
calling thermal_init+0x0/0x40 @ 1
initcall thermal_init+0x0/0x40 returned 0 after 0 usecs
calling md_init+0x0/0xd0 @ 1
initcall md_init+0x0/0xd0 returned 0 after 0 usecs
calling leds_init+0x0/0x40 @ 1
initcall leds_init+0x0/0x40 returned 0 after 0 usecs
calling pci_subsys_init+0x0/0x125 @ 1
PCI: Using ACPI for IRQ routing
initcall pci_subsys_init+0x0/0x125 returned 0 after 976 usecs
calling proto_init+0x0/0x12 @ 1
initcall proto_init+0x0/0x12 returned 0 after 0 usecs
calling net_dev_init+0x0/0x177 @ 1
initcall net_dev_init+0x0/0x177 returned 0 after 0 usecs
calling neigh_init+0x0/0x71 @ 1
initcall neigh_init+0x0/0x71 returned 0 after 0 usecs
calling fib_rules_init+0x0/0xa6 @ 1
initcall fib_rules_init+0x0/0xa6 returned 0 after 0 usecs
calling pktsched_init+0x0/0xd0 @ 1
initcall pktsched_init+0x0/0xd0 returned 0 after 0 usecs
calling tc_filter_init+0x0/0x4c @ 1
initcall tc_filter_init+0x0/0x4c returned 0 after 0 usecs
calling tc_action_init+0x0/0x4c @ 1
initcall tc_action_init+0x0/0x4c returned 0 after 0 usecs
calling genl_init+0x0/0x8f @ 1
initcall genl_init+0x0/0x8f returned 0 after 0 usecs
calling cipso_v4_init+0x0/0x67 @ 1
initcall cipso_v4_init+0x0/0x67 returned 0 after 0 usecs
calling wireless_nlevent_init+0x0/0x12 @ 1
initcall wireless_nlevent_init+0x0/0x12 returned 0 after 0 usecs
calling netlbl_init+0x0/0x83 @ 1
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
initcall netlbl_init+0x0/0x83 returned 0 after 3906 usecs
calling sysctl_init+0x0/0x49 @ 1
initcall sysctl_init+0x0/0x49 returned 0 after 0 usecs
calling xen_mc_debugfs+0x0/0x118 @ 1
initcall xen_mc_debugfs+0x0/0x118 returned 0 after 0 usecs
calling xen_mmu_debugfs+0x0/0x2be @ 1
initcall xen_mmu_debugfs+0x0/0x2be returned 0 after 0 usecs
calling print_all_ICs+0x0/0x500 @ 1
initcall print_all_ICs+0x0/0x500 returned 0 after 0 usecs
calling hpet_late_init+0x0/0x1bc @ 1
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
initcall hpet_late_init+0x0/0x1bc returned 0 after 7812 usecs
calling clocksource_done_booting+0x0/0x36 @ 1
Switching to clocksource hpet
initcall clocksource_done_booting+0x0/0x36 returned 0 after 1171 usecs
calling ftrace_init_debugfs+0x0/0x214 @ 1
initcall ftrace_init_debugfs+0x0/0x214 returned 0 after 104 usecs
calling rb_init_debugfs+0x0/0x2f @ 1
initcall rb_init_debugfs+0x0/0x2f returned 0 after 4 usecs
calling tracer_init_debugfs+0x0/0x33e @ 1
initcall tracer_init_debugfs+0x0/0x33e returned 0 after 201 usecs
calling init_trace_printk_function_export+0x0/0x2f @ 1
initcall init_trace_printk_function_export+0x0/0x2f returned 0 after 4 usecs
calling stat_workqueue_init+0x0/0x2d @ 1
initcall stat_workqueue_init+0x0/0x2d returned 0 after 5 usecs
calling event_trace_init+0x0/0x1e2 @ 1
initcall event_trace_init+0x0/0x1e2 returned 0 after 21186 usecs
calling init_pipe_fs+0x0/0x4c @ 1
initcall init_pipe_fs+0x0/0x4c returned 0 after 55 usecs
calling eventpoll_init+0x0/0xc3 @ 1
initcall eventpoll_init+0x0/0xc3 returned 0 after 76 usecs
calling anon_inode_init+0x0/0x123 @ 1
initcall anon_inode_init+0x0/0x123 returned 0 after 16 usecs
calling blk_scsi_ioctl_init+0x0/0x289 @ 1
initcall blk_scsi_ioctl_init+0x0/0x289 returned 0 after 1 usecs
calling acpi_event_init+0x0/0x80 @ 1
initcall acpi_event_init+0x0/0x80 returned 0 after 88 usecs
calling pnpacpi_init+0x0/0x8c @ 1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
initcall pnpacpi_init+0x0/0x8c returned 0 after 70303 usecs
calling pnp_system_init+0x0/0x12 @ 1
system 00:01: ioport range 0x408-0x40f has been reserved
system 00:01: ioport range 0x4d0-0x4d1 has been reserved
system 00:01: ioport range 0x700-0x73f has been reserved
system 00:01: ioport range 0x800-0x8fe has been reserved
system 00:01: ioport range 0x900-0x9fe has been reserved
system 00:01: ioport range 0x9ff-0x9ff has been reserved
system 00:01: ioport range 0xa00-0xafe has been reserved
system 00:01: ioport range 0xaff-0xaff has been reserved
system 00:01: ioport range 0xb00-0xbfe has been reserved
system 00:01: ioport range 0xbff-0xbff has been reserved
system 00:01: ioport range 0xc80-0xc83 has been reserved
system 00:01: ioport range 0xcd4-0xcd7 has been reserved
system 00:01: ioport range 0xf50-0xf58 has been reserved
system 00:01: ioport range 0xca0-0xca1 has been reserved
system 00:01: ioport range 0xca4-0xca5 has been reserved
system 00:01: ioport range 0xcf9-0xcf9 could not be reserved
system 00:01: ioport range 0x3f8-0x3ff has been reserved
system 00:01: iomem range 0x80000000-0x8fffffff could not be reserved
system 00:01: iomem range 0xf7df0000-0xf7df0fff could not be reserved
system 00:01: iomem range 0xfdef0000-0xfdef0fff could not be reserved
initcall pnp_system_init+0x0/0x12 returned 0 after 510573 usecs
calling chr_dev_init+0x0/0xc7 @ 1
initcall chr_dev_init+0x0/0xc7 returned 0 after 422 usecs
calling firmware_class_init+0x0/0x79 @ 1
initcall firmware_class_init+0x0/0x79 returned 0 after 32 usecs
calling init_pcmcia_bus+0x0/0x74 @ 1
initcall init_pcmcia_bus+0x0/0x74 returned 0 after 64 usecs
calling cpufreq_gov_performance_init+0x0/0x12 @ 1
initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 1 usecs
calling cpufreq_gov_userspace_init+0x0/0x12 @ 1
initcall cpufreq_gov_userspace_init+0x0/0x12 returned 0 after 0 usecs
calling init_acpi_pm_clocksource+0x0/0xef @ 1
initcall init_acpi_pm_clocksource+0x0/0xef returned 0 after 4426 usecs
calling pcibios_assign_resources+0x0/0x76 @ 1
pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
pci 0000:00:09.0: IO window: 0x1000-0x2fff
pci 0000:00:09.0: MEM window: 0xf7e00000-0xf7ffffff
pci 0000:00:09.0: PREFETCH window: 0xe8000000-0xefffffff
pci 0000:02:00.0: PCI bridge, secondary bus 0000:03
pci 0000:02:00.0: IO window: disabled
pci 0000:02:00.0: MEM window: 0xf8000000-0xf9ffffff
pci 0000:02:00.0: PREFETCH window: 0x90000000-0x900fffff
pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
pci 0000:00:0b.0: IO window: disabled
pci 0000:00:0b.0: MEM window: 0xf8000000-0xf9ffffff
pci 0000:00:0b.0: PREFETCH window: 0x90000000-0x900fffff
pci 0000:04:00.0: PCI bridge, secondary bus 0000:05
pci 0000:04:00.0: IO window: disabled
pci 0000:04:00.0: MEM window: 0xfa000000-0xfbffffff
pci 0000:04:00.0: PREFETCH window: 0x90100000-0x901fffff
pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
pci 0000:00:0c.0: IO window: disabled
pci 0000:00:0c.0: MEM window: 0xfa000000-0xfbffffff
pci 0000:00:0c.0: PREFETCH window: 0x90100000-0x901fffff
pci 0000:06:00.0: PCI bridge, secondary bus 0000:07
pci 0000:06:00.0: IO window: disabled
pci 0000:06:00.0: MEM window: 0xfdc00000-0xfdcfffff
pci 0000:06:00.0: PREFETCH window: disabled
pci 0000:00:0d.0: PCI bridge, secondary bus 0000:06
pci 0000:00:0d.0: IO window: disabled
pci 0000:00:0d.0: MEM window: 0xfdc00000-0xfdcfffff
pci 0000:00:0d.0: PREFETCH window: disabled
pci 0000:00:0e.0: PCI bridge, secondary bus 0000:08
pci 0000:00:0e.0: IO window: 0x3000-0x3fff
pci 0000:00:0e.0: MEM window: 0xfdd00000-0xfddfffff
pci 0000:00:0e.0: PREFETCH window: 0x90200000-0x902fffff
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:02:00.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
pci 0000:04:00.0: setting latency timer to 64
pci 0000:00:0d.0: setting latency timer to 64
pci 0000:06:00.0: setting latency timer to 64
pci 0000:00:0e.0: setting latency timer to 64
pci 0000:42:04.0: PCI bridge, secondary bus 0000:43
pci 0000:42:04.0: IO window: disabled
pci 0000:42:04.0: MEM window: disabled
pci 0000:42:04.0: PREFETCH window: disabled
pci 0000:41:00.0: PCI bridge, secondary bus 0000:42
pci 0000:41:00.0: IO window: 0x4000-0x4fff
pci 0000:41:00.0: MEM window: 0xfdf00000-0xfdffffff
pci 0000:41:00.0: PREFETCH window: 0x84000000-0x840fffff
pci 0000:40:0c.0: PCI bridge, secondary bus 0000:41
pci 0000:40:0c.0: IO window: 0x4000-0x4fff
pci 0000:40:0c.0: MEM window: 0xfdf00000-0xfdffffff
pci 0000:40:0c.0: PREFETCH window: 0x84000000-0x840fffff
pci 0000:40:0d.0: PCI bridge, secondary bus 0000:44
pci 0000:40:0d.0: IO window: disabled
pci 0000:40:0d.0: MEM window: disabled
pci 0000:40:0d.0: PREFETCH window: disabled
pci 0000:40:0e.0: PCI bridge, secondary bus 0000:47
pci 0000:40:0e.0: IO window: disabled
pci 0000:40:0e.0: MEM window: disabled
pci 0000:40:0e.0: PREFETCH window: disabled
pci 0000:40:0c.0: setting latency timer to 64
pci 0000:41:00.0: setting latency timer to 64
pci 0000:40:0d.0: setting latency timer to 64
pci 0000:40:0e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0x3fff]
pci_bus 0000:00: resource 1 mem: [0x90000000-0xfddfffff]
pci_bus 0000:00: resource 2 mem: [0x80000000-0x83ffffff]
pci_bus 0000:00: resource 3 mem: [0x0a0000-0x0bffff]
pci_bus 0000:00: resource 4 mem: [0xfe000000-0xffffffff]
pci_bus 0000:00: resource 5 mem: [0x280000000-0xfcffffffff]
pci_bus 0000:01: resource 0 io: [0x1000-0x2fff]
pci_bus 0000:01: resource 1 mem: [0xf7e00000-0xf7ffffff]
pci_bus 0000:01: resource 2 pref mem [0xe8000000-0xefffffff]
pci_bus 0000:01: resource 3 io: [0x00-0x3fff]
pci_bus 0000:01: resource 4 mem: [0x90000000-0xfddfffff]
pci_bus 0000:01: resource 5 mem: [0x80000000-0x83ffffff]
pci_bus 0000:01: resource 6 mem: [0x0a0000-0x0bffff]
pci_bus 0000:01: resource 7 mem: [0xfe000000-0xffffffff]
pci_bus 0000:01: resource 8 mem: [0x280000000-0xfcffffffff]
pci_bus 0000:02: resource 1 mem: [0xf8000000-0xf9ffffff]
pci_bus 0000:02: resource 2 pref mem [0x90000000-0x900fffff]
pci_bus 0000:03: resource 1 mem: [0xf8000000-0xf9ffffff]
pci_bus 0000:03: resource 2 pref mem [0x90000000-0x900fffff]
pci_bus 0000:04: resource 1 mem: [0xfa000000-0xfbffffff]
pci_bus 0000:04: resource 2 pref mem [0x90100000-0x901fffff]
pci_bus 0000:05: resource 1 mem: [0xfa000000-0xfbffffff]
pci_bus 0000:05: resource 2 pref mem [0x90100000-0x901fffff]
pci_bus 0000:06: resource 1 mem: [0xfdc00000-0xfdcfffff]
pci_bus 0000:07: resource 1 mem: [0xfdc00000-0xfdcfffff]
pci_bus 0000:08: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:08: resource 1 mem: [0xfdd00000-0xfddfffff]
pci_bus 0000:08: resource 2 pref mem [0x90200000-0x902fffff]
pci_bus 0000:40: resource 0 io: [0x4000-0xffff]
pci_bus 0000:40: resource 1 mem: [0xfde00000-0xfdffffff]
pci_bus 0000:40: resource 2 mem: [0x84000000-0x8fffffff]
pci_bus 0000:41: resource 0 io: [0x4000-0x4fff]
pci_bus 0000:41: resource 1 mem: [0xfdf00000-0xfdffffff]
pci_bus 0000:41: resource 2 pref mem [0x84000000-0x840fffff]
pci_bus 0000:42: resource 0 io: [0x4000-0x4fff]
pci_bus 0000:42: resource 1 mem: [0xfdf00000-0xfdffffff]
pci_bus 0000:42: resource 2 pref mem [0x84000000-0x840fffff]
initcall pcibios_assign_resources+0x0/0x76 returned 0 after 2383872 usecs
calling sysctl_core_init+0x0/0x38 @ 1
initcall sysctl_core_init+0x0/0x38 returned 0 after 12 usecs
calling inet_init+0x0/0x204 @ 1
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
initcall inet_init+0x0/0x204 returned 0 after 136900 usecs
calling af_unix_init+0x0/0x55 @ 1
NET: Registered protocol family 1
initcall af_unix_init+0x0/0x55 returned 0 after 17566 usecs
calling pci_apply_final_quirks+0x0/0x35 @ 1
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0b.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0c.0: Found enabled HT MSI Mapping
pci 0000:00:0d.0: Found enabled HT MSI Mapping
pci 0000:00:0e.0: Found enabled HT MSI Mapping
pci 0000:01:03.0: Boot video device
pci 0000:01:04.4: HCRESET not completed yet!
pci 0000:40:0c.0: Found enabled HT MSI Mapping
pci 0000:40:0d.0: Found enabled HT MSI Mapping
pci 0000:40:0e.0: Found enabled HT MSI Mapping
initcall pci_apply_final_quirks+0x0/0x35 returned 0 after 270444 usecs
calling populate_rootfs+0x0/0x23a @ 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 1292k freed
initcall populate_rootfs+0x0/0x23a returned 0 after 68162 usecs
calling pci_iommu_init+0x0/0x21 @ 1
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 20000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
initcall pci_iommu_init+0x0/0x21 returned 0 after 78924 usecs
calling calgary_fixup_tce_spaces+0x0/0xee @ 1
initcall calgary_fixup_tce_spaces+0x0/0xee returned -19 after 0 usecs
calling i8259A_init_sysfs+0x0/0x22 @ 1
initcall i8259A_init_sysfs+0x0/0x22 returned 0 after 87 usecs
calling vsyscall_init+0x0/0x6c @ 1
initcall vsyscall_init+0x0/0x6c returned 0 after 18 usecs
calling sbf_init+0x0/0xd7 @ 1
initcall sbf_init+0x0/0xd7 returned 0 after 0 usecs
calling i8237A_init_sysfs+0x0/0x22 @ 1
initcall i8237A_init_sysfs+0x0/0x22 returned 0 after 59 usecs
calling add_rtc_cmos+0x0/0xa4 @ 1
platform rtc_cmos: registered platform RTC device (no PNP device found)
initcall add_rtc_cmos+0x0/0xa4 returned 0 after 14636 usecs
calling cache_sysfs_init+0x0/0x5e @ 1
initcall cache_sysfs_init+0x0/0x5e returned 0 after 678 usecs
calling mce_init_device+0x0/0xf8 @ 1
initcall mce_init_device+0x0/0xf8 returned 0 after 247 usecs
calling threshold_init_device+0x0/0x44 @ 1
initcall threshold_init_device+0x0/0x44 returned 0 after 1 usecs
calling thermal_throttle_init_device+0x0/0x89 @ 1
initcall thermal_throttle_init_device+0x0/0x89 returned 0 after 0 usecs
calling msr_init+0x0/0x104 @ 1
initcall msr_init+0x0/0x104 returned 0 after 208 usecs
calling cpuid_init+0x0/0x104 @ 1
initcall cpuid_init+0x0/0x104 returned 0 after 214 usecs
calling ioapic_init_sysfs+0x0/0x99 @ 1
initcall ioapic_init_sysfs+0x0/0x99 returned 0 after 96 usecs
calling add_pcspkr+0x0/0x28 @ 1
initcall add_pcspkr+0x0/0x28 returned 0 after 43 usecs
calling audit_classes_init+0x0/0xaf @ 1
initcall audit_classes_init+0x0/0xaf returned 0 after 12 usecs
calling init_vdso_vars+0x0/0x19d @ 1
initcall init_vdso_vars+0x0/0x19d returned 0 after 14 usecs
calling ia32_binfmt_init+0x0/0x14 @ 1
initcall ia32_binfmt_init+0x0/0x14 returned 0 after 2 usecs
calling sysenter_setup+0x0/0x2cc @ 1
initcall sysenter_setup+0x0/0x2cc returned 0 after 5 usecs
calling init_sched_debug_procfs+0x0/0x29 @ 1
initcall init_sched_debug_procfs+0x0/0x29 returned 0 after 10 usecs
calling proc_schedstat_init+0x0/0x1f @ 1
initcall proc_schedstat_init+0x0/0x1f returned 0 after 6 usecs
calling proc_execdomains_init+0x0/0x22 @ 1
initcall proc_execdomains_init+0x0/0x22 returned 0 after 6 usecs
calling ioresources_init+0x0/0x36 @ 1
initcall ioresources_init+0x0/0x36 returned 0 after 11 usecs
calling uid_cache_init+0x0/0x70 @ 1
initcall uid_cache_init+0x0/0x70 returned 0 after 43 usecs
calling init_posix_timers+0x0/0x1b5 @ 1
initcall init_posix_timers+0x0/0x1b5 returned 0 after 26 usecs
calling init_posix_cpu_timers+0x0/0x101 @ 1
initcall init_posix_cpu_timers+0x0/0x101 returned 0 after 1 usecs
calling nsproxy_cache_init+0x0/0x2d @ 1
initcall nsproxy_cache_init+0x0/0x2d returned 0 after 25 usecs
calling create_proc_profile+0x0/0x23b @ 1
initcall create_proc_profile+0x0/0x23b returned 0 after 0 usecs
calling timekeeping_init_device+0x0/0x22 @ 1
initcall timekeeping_init_device+0x0/0x22 returned 0 after 62 usecs
calling init_clocksource_sysfs+0x0/0x50 @ 1
initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 58 usecs
calling init_timer_list_procfs+0x0/0x2c @ 1
initcall init_timer_list_procfs+0x0/0x2c returned 0 after 7 usecs
calling init_tstats_procfs+0x0/0x2c @ 1
initcall init_tstats_procfs+0x0/0x2c returned 0 after 6 usecs
calling futex_init+0x0/0x63 @ 1
initcall futex_init+0x0/0x63 returned 0 after 9 usecs
calling proc_dma_init+0x0/0x22 @ 1
initcall proc_dma_init+0x0/0x22 returned 0 after 5 usecs
calling proc_modules_init+0x0/0x22 @ 1
initcall proc_modules_init+0x0/0x22 returned 0 after 5 usecs
calling kallsyms_init+0x0/0x25 @ 1
initcall kallsyms_init+0x0/0x25 returned 0 after 9 usecs
calling snapshot_device_init+0x0/0x12 @ 1
initcall snapshot_device_init+0x0/0x12 returned 0 after 43 usecs
calling crash_save_vmcoreinfo_init+0x0/0x46d @ 1
initcall crash_save_vmcoreinfo_init+0x0/0x46d returned 0 after 22 usecs
calling crash_notes_memory_init+0x0/0x36 @ 1
initcall crash_notes_memory_init+0x0/0x36 returned 0 after 6 usecs
calling pid_namespaces_init+0x0/0x2d @ 1
initcall pid_namespaces_init+0x0/0x2d returned 0 after 39 usecs
calling audit_init+0x0/0x133 @ 1
audit: initializing netlink socket (disabled)
type=2000 audit(1259593201.612:1): initialized
initcall audit_init+0x0/0x133 returned 0 after 34059 usecs
calling audit_tree_init+0x0/0x49 @ 1
initcall audit_tree_init+0x0/0x49 returned 0 after 2 usecs
calling init_kprobes+0x0/0x167 @ 1
initcall init_kprobes+0x0/0x167 returned 0 after 7161 usecs
calling hung_task_init+0x0/0x53 @ 1
initcall hung_task_init+0x0/0x53 returned 0 after 67 usecs
calling utsname_sysctl_init+0x0/0x14 @ 1
initcall utsname_sysctl_init+0x0/0x14 returned 0 after 3 usecs
calling init_tracepoints+0x0/0x17 @ 1
initcall init_tracepoints+0x0/0x17 returned 0 after 0 usecs
calling init_lstats_procfs+0x0/0x25 @ 1
initcall init_lstats_procfs+0x0/0x25 returned 0 after 10 usecs
calling ftrace_mod_cmd_init+0x0/0x12 @ 1
initcall ftrace_mod_cmd_init+0x0/0x12 returned 0 after 1 usecs
calling init_events+0x0/0x62 @ 1
initcall init_events+0x0/0x62 returned 0 after 6 usecs
calling init_sched_switch_trace+0x0/0x12 @ 1
initcall init_sched_switch_trace+0x0/0x12 returned 0 after 2 usecs
calling init_stack_trace+0x0/0x12 @ 1
initcall init_stack_trace+0x0/0x12 returned 0 after 0 usecs
calling init_function_trace+0x0/0x3e @ 1
initcall init_function_trace+0x0/0x3e returned 0 after 1 usecs
calling init_wakeup_tracer+0x0/0x22 @ 1
initcall init_wakeup_tracer+0x0/0x22 returned 0 after 1 usecs
calling stack_trace_init+0x0/0x6b @ 1
initcall stack_trace_init+0x0/0x6b returned 0 after 20 usecs
calling init_graph_trace+0x0/0x32 @ 1
initcall init_graph_trace+0x0/0x32 returned 0 after 1 usecs
calling init_kmem_tracer+0x0/0x56 @ 1
initcall init_kmem_tracer+0x0/0x56 returned 0 after 2 usecs
calling init_blk_tracer+0x0/0x57 @ 1
initcall init_blk_tracer+0x0/0x57 returned 0 after 2 usecs
calling perf_event_sysfs_init+0x0/0x19 @ 1
initcall perf_event_sysfs_init+0x0/0x19 returned 0 after 7 usecs
calling init_per_zone_wmark_min+0x0/0x70 @ 1
initcall init_per_zone_wmark_min+0x0/0x70 returned 0 after 510 usecs
calling kswapd_init+0x0/0x4d @ 1
initcall kswapd_init+0x0/0x4d returned 0 after 99 usecs
calling setup_vmstat+0x0/0xae @ 1
initcall setup_vmstat+0x0/0xae returned 0 after 31 usecs
calling mm_sysfs_init+0x0/0x29 @ 1
initcall mm_sysfs_init+0x0/0x29 returned 0 after 7 usecs
calling proc_vmalloc_init+0x0/0x25 @ 1
initcall proc_vmalloc_init+0x0/0x25 returned 0 after 6 usecs
calling procswaps_init+0x0/0x22 @ 1
initcall procswaps_init+0x0/0x22 returned 0 after 6 usecs
calling hugetlb_init+0x0/0x31a @ 1
HugeTLB registered 2 MB page size, pre-allocated 0 pages
initcall hugetlb_init+0x0/0x31a returned 0 after 27345 usecs
calling ksm_init+0x0/0x16f @ 1
initcall ksm_init+0x0/0x16f returned 0 after 168 usecs
calling slab_proc_init+0x0/0x25 @ 1
initcall slab_proc_init+0x0/0x25 returned 0 after 7 usecs
calling slab_sysfs_init+0x0/0xf0 @ 1
initcall slab_sysfs_init+0x0/0xf0 returned 0 after 6225 usecs
calling fasync_init+0x0/0x2a @ 1
initcall fasync_init+0x0/0x2a returned 0 after 102 usecs
calling proc_filesystems_init+0x0/0x22 @ 1
initcall proc_filesystems_init+0x0/0x22 returned 0 after 7 usecs
calling dnotify_init+0x0/0x80 @ 1
initcall dnotify_init+0x0/0x80 returned 0 after 206 usecs
calling inotify_setup+0x0/0x12 @ 1
initcall inotify_setup+0x0/0x12 returned 0 after 0 usecs
calling inotify_user_setup+0x0/0xbe @ 1
initcall inotify_user_setup+0x0/0xbe returned 0 after 219 usecs
calling aio_setup+0x0/0x9f @ 1
initcall aio_setup+0x0/0x9f returned 0 after 389 usecs
calling proc_locks_init+0x0/0x22 @ 1
initcall proc_locks_init+0x0/0x22 returned 0 after 40 usecs
calling init_sys32_ioctl+0x0/0x7c @ 1
initcall init_sys32_ioctl+0x0/0x7c returned 0 after 14 usecs
calling init_mbcache+0x0/0x14 @ 1
initcall init_mbcache+0x0/0x14 returned 0 after 1 usecs
calling dquot_init+0x0/0xfe @ 1
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
initcall dquot_init+0x0/0xfe returned 0 after 43985 usecs
calling init_v2_quota_format+0x0/0x12 @ 1
initcall init_v2_quota_format+0x0/0x12 returned 0 after 0 usecs
calling proc_cmdline_init+0x0/0x22 @ 1
initcall proc_cmdline_init+0x0/0x22 returned 0 after 7 usecs
calling proc_cpuinfo_init+0x0/0x22 @ 1
initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 5 usecs
calling proc_devices_init+0x0/0x22 @ 1
initcall proc_devices_init+0x0/0x22 returned 0 after 5 usecs
calling proc_interrupts_init+0x0/0x22 @ 1
initcall proc_interrupts_init+0x0/0x22 returned 0 after 5 usecs
calling proc_loadavg_init+0x0/0x22 @ 1
initcall proc_loadavg_init+0x0/0x22 returned 0 after 5 usecs
calling proc_meminfo_init+0x0/0x22 @ 1
initcall proc_meminfo_init+0x0/0x22 returned 0 after 11 usecs
calling proc_stat_init+0x0/0x22 @ 1
initcall proc_stat_init+0x0/0x22 returned 0 after 5 usecs
calling proc_uptime_init+0x0/0x22 @ 1
initcall proc_uptime_init+0x0/0x22 returned 0 after 5 usecs
calling proc_version_init+0x0/0x22 @ 1
initcall proc_version_init+0x0/0x22 returned 0 after 5 usecs
calling proc_softirqs_init+0x0/0x22 @ 1
initcall proc_softirqs_init+0x0/0x22 returned 0 after 5 usecs
calling proc_kcore_init+0x0/0xb5 @ 1
initcall proc_kcore_init+0x0/0xb5 returned 0 after 14 usecs
calling vmcore_init+0x0/0x8e2 @ 1
initcall vmcore_init+0x0/0x8e2 returned 0 after 1 usecs
calling proc_kmsg_init+0x0/0x25 @ 1
initcall proc_kmsg_init+0x0/0x25 returned 0 after 5 usecs
calling proc_page_init+0x0/0x3c @ 1
initcall proc_page_init+0x0/0x3c returned 0 after 10 usecs
calling configfs_init+0x0/0xb3 @ 1
initcall configfs_init+0x0/0xb3 returned 0 after 124 usecs
calling init_devpts_fs+0x0/0x4d @ 1
initcall init_devpts_fs+0x0/0x4d returned 0 after 46 usecs
calling init_ext3_fs+0x0/0x6b @ 1
initcall init_ext3_fs+0x0/0x6b returned 0 after 217 usecs
calling journal_init+0x0/0x99 @ 1
initcall journal_init+0x0/0x99 returned 0 after 419 usecs
calling init_ramfs_fs+0x0/0x12 @ 1
initcall init_ramfs_fs+0x0/0x12 returned 0 after 1 usecs
calling init_hugetlbfs_fs+0x0/0x98 @ 1
initcall init_hugetlbfs_fs+0x0/0x98 returned 0 after 123 usecs
calling init_iso9660_fs+0x0/0x6c @ 1
initcall init_iso9660_fs+0x0/0x6c returned 0 after 126 usecs
calling init_nls_cp437+0x0/0x12 @ 1
initcall init_nls_cp437+0x0/0x12 returned 0 after 1 usecs
calling init_nls_ascii+0x0/0x12 @ 1
initcall init_nls_ascii+0x0/0x12 returned 0 after 0 usecs
calling ipc_init+0x0/0x2f @ 1
msgmni has been set to 16004
initcall ipc_init+0x0/0x2f returned 0 after 14689 usecs
calling ipc_sysctl_init+0x0/0x14 @ 1
initcall ipc_sysctl_init+0x0/0x14 returned 0 after 6 usecs
calling init_mqueue_fs+0x0/0xb4 @ 1
initcall init_mqueue_fs+0x0/0xb4 returned 0 after 123 usecs
calling key_proc_init+0x0/0x53 @ 1
initcall key_proc_init+0x0/0x53 returned 0 after 13 usecs
calling selinux_nf_ip_init+0x0/0x60 @ 1
initcall selinux_nf_ip_init+0x0/0x60 returned 0 after 0 usecs
calling init_sel_fs+0x0/0x69 @ 1
initcall init_sel_fs+0x0/0x69 returned 0 after 0 usecs
calling selnl_init+0x0/0x4d @ 1
initcall selnl_init+0x0/0x4d returned 0 after 18 usecs
calling sel_netif_init+0x0/0x66 @ 1
initcall sel_netif_init+0x0/0x66 returned 0 after 0 usecs
calling sel_netnode_init+0x0/0x72 @ 1
initcall sel_netnode_init+0x0/0x72 returned 0 after 0 usecs
calling sel_netport_init+0x0/0x72 @ 1
initcall sel_netport_init+0x0/0x72 returned 0 after 0 usecs
calling aurule_init+0x0/0x37 @ 1
initcall aurule_init+0x0/0x37 returned 0 after 1 usecs
calling crypto_wq_init+0x0/0x2e @ 1
initcall crypto_wq_init+0x0/0x2e returned 0 after 202 usecs
calling crypto_algapi_init+0x0/0xd @ 1
initcall crypto_algapi_init+0x0/0xd returned 0 after 7 usecs
calling skcipher_module_init+0x0/0x35 @ 1
initcall skcipher_module_init+0x0/0x35 returned 0 after 0 usecs
calling chainiv_module_init+0x0/0x12 @ 1
initcall chainiv_module_init+0x0/0x12 returned 0 after 2 usecs
calling eseqiv_module_init+0x0/0x12 @ 1
initcall eseqiv_module_init+0x0/0x12 returned 0 after 0 usecs
calling hmac_module_init+0x0/0x12 @ 1
initcall hmac_module_init+0x0/0x12 returned 0 after 0 usecs
calling md5_mod_init+0x0/0x12 @ 1
initcall md5_mod_init+0x0/0x12 returned 0 after 103 usecs
calling sha1_generic_mod_init+0x0/0x12 @ 1
initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 80 usecs
calling crc32c_mod_init+0x0/0x12 @ 1
initcall crc32c_mod_init+0x0/0x12 returned 0 after 145 usecs
calling krng_mod_init+0x0/0x12 @ 1
alg: No test for stdrng (krng)
initcall krng_mod_init+0x0/0x12 returned 0 after 4882 usecs
calling proc_genhd_init+0x0/0x36 @ 1
initcall proc_genhd_init+0x0/0x36 returned 0 after 11 usecs
calling bsg_init+0x0/0x12e @ 1
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
initcall bsg_init+0x0/0x12e returned 0 after 33477 usecs
calling noop_init+0x0/0x14 @ 1
io scheduler noop registered
initcall noop_init+0x0/0x14 returned 0 after 13667 usecs
calling as_init+0x0/0x14 @ 1
io scheduler anticipatory registered
initcall as_init+0x0/0x14 returned 0 after 17608 usecs
calling deadline_init+0x0/0x14 @ 1
io scheduler deadline registered
initcall deadline_init+0x0/0x14 returned 0 after 15636 usecs
calling cfq_init+0x0/0x94 @ 1
io scheduler cfq registered (default)
initcall cfq_init+0x0/0x94 returned 0 after 19527 usecs
calling percpu_counter_startup+0x0/0x19 @ 1
initcall percpu_counter_startup+0x0/0x19 returned 0 after 2 usecs
calling dynamic_debug_init+0x0/0x12b @ 1
initcall dynamic_debug_init+0x0/0x12b returned 0 after 142 usecs
calling pci_proc_init+0x0/0x6a @ 1
initcall pci_proc_init+0x0/0x6a returned 0 after 386 usecs
calling pcie_portdrv_init+0x0/0x4c @ 1
alloc irq_desc for 62 on node 0
alloc kstat_irqs on node 0
pcieport 0000:00:0b.0: irq 62 for MSI/MSI-X
pcieport 0000:00:0b.0: setting latency timer to 64
alloc irq_desc for 63 on node 0
alloc kstat_irqs on node 0
pcieport 0000:00:0c.0: irq 63 for MSI/MSI-X
pcieport 0000:00:0c.0: setting latency timer to 64
alloc irq_desc for 64 on node 0
alloc kstat_irqs on node 0
pcieport 0000:00:0d.0: irq 64 for MSI/MSI-X
pcieport 0000:00:0d.0: setting latency timer to 64
alloc irq_desc for 65 on node 0
alloc kstat_irqs on node 0
pcieport 0000:00:0e.0: irq 65 for MSI/MSI-X
pcieport 0000:00:0e.0: setting latency timer to 64
alloc irq_desc for 66 on node 1
alloc kstat_irqs on node 1
pcieport 0000:40:0c.0: irq 66 for MSI/MSI-X
pcieport 0000:40:0c.0: setting latency timer to 64
alloc irq_desc for 67 on node 1
alloc kstat_irqs on node 1
pcieport 0000:40:0d.0: irq 67 for MSI/MSI-X
pcieport 0000:40:0d.0: setting latency timer to 64
alloc irq_desc for 68 on node 1
alloc kstat_irqs on node 1
pcieport 0000:40:0e.0: irq 68 for MSI/MSI-X
pcieport 0000:40:0e.0: setting latency timer to 64
initcall pcie_portdrv_init+0x0/0x4c returned 0 after 487739 usecs
calling aer_service_init+0x0/0x2b @ 1
aer 0000:00:0b.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:0c.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:0d.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:0e.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:40:0c.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:40:0d.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:40:0e.0:pcie02: AER service couldn't init device: no _OSC support
initcall aer_service_init+0x0/0x2b returned 0 after 226625 usecs
calling pci_hotplug_init+0x0/0x1d @ 1
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
initcall pci_hotplug_init+0x0/0x1d returned 0 after 24293 usecs
calling pcied_init+0x0/0x7a @ 1
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
initcall pcied_init+0x0/0x7a returned 0 after 30283 usecs
calling acpiphp_init+0x0/0x5f @ 1
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
initcall acpiphp_init+0x0/0x5f returned -19 after 29670 usecs
calling pci_stub_init+0x0/0x12a @ 1
pci-stub: invalid id string ""
initcall pci_stub_init+0x0/0x12a returned 0 after 6683 usecs
calling fb_console_init+0x0/0x12a @ 1
initcall fb_console_init+0x0/0x12a returned 0 after 49 usecs
calling xenfb_init+0x0/0x44 @ 1
initcall xenfb_init+0x0/0x44 returned -19 after 0 usecs
calling vesafb_init+0x0/0x235 @ 1
initcall vesafb_init+0x0/0x235 returned 0 after 94 usecs
calling efifb_init+0x0/0x1f2 @ 1
initcall efifb_init+0x0/0x1f2 returned -19 after 3 usecs
calling acpi_reserve_resources+0x0/0xeb @ 1
initcall acpi_reserve_resources+0x0/0xeb returned 0 after 5 usecs
calling irqrouter_init_sysfs+0x0/0x38 @ 1
initcall irqrouter_init_sysfs+0x0/0x38 returned 0 after 62 usecs
calling acpi_ac_init+0x0/0x45 @ 1
initcall acpi_ac_init+0x0/0x45 returned 0 after 61 usecs
calling acpi_button_init+0x0/0x56 @ 1
input: Power Button as /class/input/input0
ACPI: Power Button [PWRF]
initcall acpi_button_init+0x0/0x56 returned 0 after 35203 usecs
calling acpi_fan_init+0x0/0x56 @ 1
initcall acpi_fan_init+0x0/0x56 returned 0 after 50 usecs
calling acpi_pci_slot_init+0x0/0x20 @ 1
initcall acpi_pci_slot_init+0x0/0x20 returned 0 after 1326 usecs
calling acpi_processor_init+0x0/0x10e @ 1
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
initcall acpi_processor_init+0x0/0x10e returned 0 after 88264 usecs
calling acpi_container_init+0x0/0x42 @ 1
initcall acpi_container_init+0x0/0x42 returned 0 after 7219 usecs
calling acpi_thermal_init+0x0/0x7b @ 1
initcall acpi_thermal_init+0x0/0x7b returned 0 after 85 usecs
calling acpi_battery_init+0x0/0x16 @ 1
initcall acpi_battery_init+0x0/0x16 returned 0 after 4 usecs
calling 1_acpi_battery_init_async+0x0/0x3c @ 76
initcall 1_acpi_battery_init_async+0x0/0x3c returned 0 after 73 usecs
calling hypervisor_subsys_init+0x0/0x25 @ 1
initcall hypervisor_subsys_init+0x0/0x25 returned -19 after 0 usecs
calling hyper_sysfs_init+0x0/0xb3 @ 1
initcall hyper_sysfs_init+0x0/0xb3 returned -19 after 0 usecs
calling rand_initialize+0x0/0x31 @ 1
initcall rand_initialize+0x0/0x31 returned 0 after 15 usecs
calling tty_init+0x0/0xf5 @ 1
initcall tty_init+0x0/0xf5 returned 0 after 3176 usecs
calling pty_init+0x0/0x284 @ 1
initcall pty_init+0x0/0x284 returned 0 after 61 usecs
calling sysrq_init+0x0/0x25 @ 1
initcall sysrq_init+0x0/0x25 returned 0 after 12 usecs
calling xen_init+0x0/0x78 @ 1
initcall xen_init+0x0/0x78 returned -19 after 0 usecs
calling raw_init+0x0/0xe5 @ 1
initcall raw_init+0x0/0xe5 returned 0 after 85 usecs
calling hpet_init+0x0/0x6a @ 1
initcall hpet_init+0x0/0x6a returned 0 after 207 usecs
calling nvram_init+0x0/0x82 @ 1
Non-volatile memory driver v1.3
initcall nvram_init+0x0/0x82 returned 0 after 16593 usecs
calling agp_init+0x0/0x26 @ 1
Linux agpgart interface v0.103
initcall agp_init+0x0/0x26 returned 0 after 12067 usecs
calling agp_intel_init+0x0/0x29 @ 1
initcall agp_intel_init+0x0/0x29 returned 0 after 56 usecs
calling agp_sis_init+0x0/0x29 @ 1
initcall agp_sis_init+0x0/0x29 returned 0 after 46 usecs
calling agp_via_init+0x0/0x29 @ 1
initcall agp_via_init+0x0/0x29 returned 0 after 53 usecs
calling init_tis+0x0/0x91 @ 1
initcall init_tis+0x0/0x91 returned 0 after 42 usecs
calling cn_proc_init+0x0/0x3d @ 1
initcall cn_proc_init+0x0/0x3d returned 0 after 3 usecs
calling serial8250_init+0x0/0x14c @ 1
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
async_waiting @ 1
async_continuing @ 1 after 0 usec
async_waiting @ 1
async_continuing @ 1 after 0 usec
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
async_waiting @ 1
async_continuing @ 1 after 0 usec
async_waiting @ 1
async_continuing @ 1 after 0 usec
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
initcall serial8250_init+0x0/0x14c returned 0 after 638902 usecs
calling serial8250_pnp_init+0x0/0x12 @ 1
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
initcall serial8250_pnp_init+0x0/0x12 returned 0 after 23520 usecs
calling serial8250_pci_init+0x0/0x1b @ 1
initcall serial8250_pci_init+0x0/0x1b returned 0 after 97 usecs
calling init_kgdboc+0x0/0x16 @ 1
initcall init_kgdboc+0x0/0x16 returned 0 after 0 usecs
calling topology_sysfs_init+0x0/0x53 @ 1
initcall topology_sysfs_init+0x0/0x53 returned 0 after 90 usecs
calling brd_init+0x0/0x160 @ 1
brd: module loaded
initcall brd_init+0x0/0x160 returned 0 after 10715 usecs
calling loop_init+0x0/0x189 @ 1
loop: module loaded
initcall loop_init+0x0/0x189 returned 0 after 11096 usecs
calling init_kgdbts+0x0/0x16 @ 1
initcall init_kgdbts+0x0/0x16 returned 0 after 0 usecs
calling mac_hid_init+0x0/0x8e @ 1
input: Macintosh mouse button emulation as /class/input/input1
initcall mac_hid_init+0x0/0x8e returned 0 after 31259 usecs
calling scsi_dh_init+0x0/0x3f @ 1
initcall scsi_dh_init+0x0/0x3f returned 0 after 1 usecs
calling init_sd+0x0/0x181 @ 1
initcall init_sd+0x0/0x181 returned 0 after 225 usecs
calling init_sr+0x0/0x49 @ 1
initcall init_sr+0x0/0x49 returned 0 after 34 usecs
calling init_sg+0x0/0x122 @ 1
initcall init_sg+0x0/0x122 returned 0 after 81 usecs
calling piix_init+0x0/0x29 @ 1
initcall piix_init+0x0/0x29 returned 0 after 57 usecs
calling fixed_mdio_bus_init+0x0/0xf4 @ 1
Fixed MDIO Bus: probed
initcall fixed_mdio_bus_init+0x0/0xf4 returned 0 after 10925 usecs
calling bnx2_init+0x0/0x1b @ 1
Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.2 (Aug 21, 2009)
ACPI: PCI Interrupt Link [LNKX] enabled at IRQ 17
alloc irq_desc for 17 on node 0
alloc kstat_irqs on node 0
bnx2 0000:03:00.0: PCI INT A -> Link[LNKX] -> GSI 17 (level, high) -> IRQ 17
bnx2 0000:03:00.0: firmware: using built-in firmware bnx2/bnx2-mips-06-5.0.0.j3.fw
bnx2 0000:03:00.0: firmware: using built-in firmware bnx2/bnx2-rv2p-06-5.0.0.j3.fw
eth0: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 17, node addr 00:18:fe:35:26:f6
ACPI: PCI Interrupt Link [LNKW] enabled at IRQ 16
alloc irq_desc for 16 on node 0
alloc kstat_irqs on node 0
bnx2 0000:05:00.0: PCI INT A -> Link[LNKW] -> GSI 16 (level, high) -> IRQ 16
bnx2 0000:05:00.0: firmware: using built-in firmware bnx2/bnx2-mips-06-5.0.0.j3.fw
bnx2 0000:05:00.0: firmware: using built-in firmware bnx2/bnx2-rv2p-06-5.0.0.j3.fw
eth1: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem fa000000, IRQ 16, node addr 00:18:fe:35:26:f4
initcall bnx2_init+0x0/0x1b returned 0 after 477633 usecs
calling net_olddevs_init+0x0/0xa0 @ 1
initcall net_olddevs_init+0x0/0xa0 returned 0 after 4 usecs
calling init_netconsole+0x0/0x206 @ 1
netconsole: local port 50000
netconsole: local IP 139.185.50.77
netconsole: interface eth0
netconsole: remote port 50000
netconsole: remote IP 139.185.50.76
netconsole: remote ethernet address 00:18:fe:34:1c:3d
netconsole: device eth0 not up yet, forcing it
alloc irq_desc for 69 on node 0
alloc kstat_irqs on node 0
bnx2 0000:03:00.0: irq 69 for MSI/MSI-X
bnx2: eth0: using MSI
bnx2: eth0 NIC SerDes Link is Up,
netconsole: carrier detect appears untrustworthy, waiting 4 seconds
1000 Mbps full duplex, receive & transmit flow control ON
bnx2: eth0 NIC SerDes Link is Down
bnx2: eth0 NIC SerDes Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
Clocksource tsc unstable (delta = 4398045275859 ns)
console [netcon0] enabled
netconsole: network logging started
initcall init_netconsole+0x0/0x206 returned 0 after 34899027 usecs
calling cdrom_init+0x0/0xd @ 1
initcall cdrom_init+0x0/0xd returned 0 after 26 usecs
calling mon_init+0x0/0x103 @ 1
initcall mon_init+0x0/0x103 returned 0 after 198 usecs
calling ehci_hcd_init+0x0/0xc0 @ 1
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LNU2] enabled at IRQ 23
alloc irq_desc for 23 on node 0
alloc kstat_irqs on node 0
ehci_hcd 0000:00:02.1: PCI INT B -> Link[LNU2] -> GSI 23 (level, high) -> IRQ 23
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 23, io mem 0xf7dd0000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-rc8 ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
initcall ehci_hcd_init+0x0/0xc0 returned 0 after 473885 usecs
calling ohci_hcd_mod_init+0x0/0x92 @ 1
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LNU0] enabled at IRQ 22
alloc irq_desc for 22 on node 0
alloc kstat_irqs on node 0
ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNU0] -> GSI 22 (level, high) -> IRQ 22
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 22, io mem 0xf7de0000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-rc8 ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
initcall ohci_hcd_mod_init+0x0/0x92 returned 0 after 452606 usecs
calling uhci_hcd_init+0x0/0xc1 @ 1
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:01:04.4: PCI INT B -> Link[LNKX] -> GSI 17 (level, high) -> IRQ 17
uhci_hcd 0000:01:04.4: UHCI Host Controller
uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 3
uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
uhci_hcd 0000:01:04.4: HCRESET not completed yet!
uhci_hcd 0000:01:04.4: irq 17, io base 0x00001800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-rc8 uhci_hcd
usb usb3: SerialNumber: 0000:01:04.4
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
initcall uhci_hcd_init+0x0/0xc1 returned 0 after 351536 usecs
calling i8042_init+0x0/0x3f9 @ 1
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
initcall i8042_init+0x0/0x3f9 returned 0 after 64807 usecs
calling serport_init+0x0/0x34 @ 1
initcall serport_init+0x0/0x34 returned 0 after 0 usecs
calling mousedev_init+0x0/0x62 @ 1
mice: PS/2 mouse device common for all mice
initcall mousedev_init+0x0/0x62 returned 0 after 18603 usecs
calling evdev_init+0x0/0x12 @ 1
initcall evdev_init+0x0/0x12 returned 0 after 111 usecs
calling atkbd_init+0x0/0x27 @ 1
usb 3-1: new full speed USB device using uhci_hcd and address 2
initcall atkbd_init+0x0/0x27 returned 0 after 53 usecs
calling psmouse_init+0x0/0x70 @ 1
initcall psmouse_init+0x0/0x70 returned 0 after 117 usecs
calling xenkbd_init+0x0/0x44 @ 1
initcall xenkbd_init+0x0/0x44 returned -19 after 0 usecs
usb 3-1: New USB device found, idVendor=03f0, idProduct=1027
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: Virtual Keyboard
usb 3-1: Manufacturer: HP
usb 3-1: configuration #1 chosen from 1 choice
usb 3-2: new full speed USB device using uhci_hcd and address 3
calling cmos_init+0x0/0x6d @ 1
Driver 'rtc_cmos' needs updating - please use bus_type methods
rtc_cmos rtc_cmos: RTC can wake from S4
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
usb 3-2: New USB device found, idVendor=03f0, idProduct=1327
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: Virtual Hub
usb 3-2: Manufacturer: HP
usb 3-2: configuration #1 chosen from 1 choice
hub 3-2:1.0: USB hub found
hub 3-2:1.0: 7 ports detected
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
initcall cmos_init+0x0/0x6d returned 0 after 244201 usecs
calling dm_init+0x0/0x49 @ 1
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
initcall dm_init+0x0/0x49 returned 0 after 44913 usecs
calling dm_snapshot_init+0x0/0x238 @ 1
initcall dm_snapshot_init+0x0/0x238 returned 0 after 400 usecs
calling dm_mirror_init+0x0/0x79 @ 1
initcall dm_mirror_init+0x0/0x79 returned 0 after 106 usecs
calling dm_dirty_log_init+0x0/0x59 @ 1
initcall dm_dirty_log_init+0x0/0x59 returned 0 after 1 usecs
calling dm_zero_init+0x0/0x31 @ 1
initcall dm_zero_init+0x0/0x31 returned 0 after 1 usecs
calling init_ladder+0x0/0x12 @ 1
cpuidle: using governor ladder
initcall init_ladder+0x0/0x12 returned 0 after 14327 usecs
calling init_menu+0x0/0x12 @ 1
cpuidle: using governor menu
initcall init_menu+0x0/0x12 returned 0 after 13422 usecs
calling efivars_init+0x0/0x1f9 @ 1
initcall efivars_init+0x0/0x1f9 returned -19 after 0 usecs
calling hid_init+0x0/0x66 @ 1
initcall hid_init+0x0/0x66 returned 0 after 108 usecs
calling a4_init+0x0/0x1b @ 1
initcall a4_init+0x0/0x1b returned 0 after 37 usecs
calling apple_init+0x0/0x38 @ 1
initcall apple_init+0x0/0x38 returned 0 after 49 usecs
calling belkin_init+0x0/0x1b @ 1
initcall belkin_init+0x0/0x1b returned 0 after 36 usecs
calling ch_init+0x0/0x1b @ 1
initcall ch_init+0x0/0x1b returned 0 after 36 usecs
calling ch_init+0x0/0x1b @ 1
initcall ch_init+0x0/0x1b returned 0 after 36 usecs
calling cp_init+0x0/0x1b @ 1
initcall cp_init+0x0/0x1b returned 0 after 36 usecs
calling dr_init+0x0/0x1b @ 1
initcall dr_init+0x0/0x1b returned 0 after 36 usecs
calling ez_init+0x0/0x1b @ 1
initcall ez_init+0x0/0x1b returned 0 after 36 usecs
calling gyration_init+0x0/0x1b @ 1
initcall gyration_init+0x0/0x1b returned 0 after 46 usecs
calling ks_init+0x0/0x1b @ 1
initcall ks_init+0x0/0x1b returned 0 after 40 usecs
calling kye_init+0x0/0x1b @ 1
initcall kye_init+0x0/0x1b returned 0 after 36 usecs
calling lg_init+0x0/0x1b @ 1
initcall lg_init+0x0/0x1b returned 0 after 72 usecs
calling ms_init+0x0/0x1b @ 1
initcall ms_init+0x0/0x1b returned 0 after 36 usecs
calling mr_init+0x0/0x1b @ 1
initcall mr_init+0x0/0x1b returned 0 after 36 usecs
calling ntrig_init+0x0/0x1b @ 1
initcall ntrig_init+0x0/0x1b returned 0 after 36 usecs
calling pl_init+0x0/0x1b @ 1
initcall pl_init+0x0/0x1b returned 0 after 36 usecs
calling pl_init+0x0/0x1b @ 1
initcall pl_init+0x0/0x1b returned 0 after 36 usecs
calling samsung_init+0x0/0x1b @ 1
initcall samsung_init+0x0/0x1b returned 0 after 40 usecs
calling sjoy_init+0x0/0x1b @ 1
initcall sjoy_init+0x0/0x1b returned 0 after 37 usecs
calling sony_init+0x0/0x1b @ 1
initcall sony_init+0x0/0x1b returned 0 after 36 usecs
calling sp_init+0x0/0x1b @ 1
initcall sp_init+0x0/0x1b returned 0 after 45 usecs
calling ga_init+0x0/0x1b @ 1
initcall ga_init+0x0/0x1b returned 0 after 36 usecs
calling tm_init+0x0/0x1b @ 1
initcall tm_init+0x0/0x1b returned 0 after 36 usecs
calling ts_init+0x0/0x1b @ 1
initcall ts_init+0x0/0x1b returned 0 after 37 usecs
calling twinhan_init+0x0/0x1b @ 1
initcall twinhan_init+0x0/0x1b returned 0 after 41 usecs
calling zp_init+0x0/0x1b @ 1
initcall zp_init+0x0/0x1b returned 0 after 38 usecs
calling hid_init+0x0/0xc7 @ 1
usbcore: registered new interface driver hiddev
input: HP Virtual Keyboard as /class/input/input2
generic-usb 0003:03F0:1027.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1/input0
input: HP Virtual Keyboard as /class/input/input3
generic-usb 0003:03F0:1027.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1/input1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
initcall hid_init+0x0/0xc7 returned 0 after 208035 usecs
calling staging_init+0x0/0x8 @ 1
initcall staging_init+0x0/0x8 returned 0 after 0 usecs
calling flow_cache_init+0x0/0x187 @ 1
initcall flow_cache_init+0x0/0x187 returned 0 after 133 usecs
calling blackhole_module_init+0x0/0x12 @ 1
initcall blackhole_module_init+0x0/0x12 returned 0 after 1 usecs
calling init_cgroup_cls+0x0/0x12 @ 1
initcall init_cgroup_cls+0x0/0x12 returned 0 after 0 usecs
calling nf_conntrack_standalone_init+0x0/0x12 @ 1
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
initcall nf_conntrack_standalone_init+0x0/0x12 returned 0 after 122076 usecs
calling xt_init+0x0/0x129 @ 1
initcall xt_init+0x0/0x129 returned 0 after 7 usecs
calling tcpudp_mt_init+0x0/0x17 @ 1
initcall tcpudp_mt_init+0x0/0x17 returned 0 after 1 usecs
calling conntrack_mt_init+0x0/0x17 @ 1
initcall conntrack_mt_init+0x0/0x17 returned 0 after 0 usecs
calling state_mt_init+0x0/0x17 @ 1
initcall state_mt_init+0x0/0x17 returned 0 after 0 usecs
calling sysctl_ipv4_init+0x0/0x4e @ 1
initcall sysctl_ipv4_init+0x0/0x4e returned 0 after 11 usecs
calling init_syncookies+0x0/0x19 @ 1
initcall init_syncookies+0x0/0x19 returned 0 after 26 usecs
calling ipv4_netfilter_init+0x0/0x17 @ 1
initcall ipv4_netfilter_init+0x0/0x17 returned 0 after 1 usecs
calling nf_conntrack_l3proto_ipv4_init+0x0/0x12d @ 1
initcall nf_conntrack_l3proto_ipv4_init+0x0/0x12d returned 0 after 19 usecs
calling nf_defrag_init+0x0/0x17 @ 1
initcall nf_defrag_init+0x0/0x17 returned 0 after 0 usecs
calling ip_tables_init+0x0/0xaf @ 1
ip_tables: (C) 2000-2006 Netfilter Core Team
initcall ip_tables_init+0x0/0xaf returned 0 after 20953 usecs
calling iptable_filter_init+0x0/0x6c @ 1
initcall iptable_filter_init+0x0/0x6c returned 0 after 40 usecs
calling reject_tg_init+0x0/0x12 @ 1
initcall reject_tg_init+0x0/0x12 returned 0 after 0 usecs
calling cubictcp_register+0x0/0x6e @ 1
TCP cubic registered
initcall cubictcp_register+0x0/0x6e returned 0 after 9820 usecs
calling xfrm_user_init+0x0/0x4d @ 1
Initializing XFRM netlink socket
initcall xfrm_user_init+0x0/0x4d returned 0 after 16599 usecs
calling packet_init+0x0/0x47 @ 1
NET: Registered protocol family 17
initcall packet_init+0x0/0x47 returned 0 after 16439 usecs
calling dsa_init_module+0x0/0x14 @ 1
initcall dsa_init_module+0x0/0x14 returned 0 after 1 usecs
calling edsa_init_module+0x0/0x14 @ 1
initcall edsa_init_module+0x0/0x14 returned 0 after 0 usecs
calling trailer_init_module+0x0/0x14 @ 1
initcall trailer_init_module+0x0/0x14 returned 0 after 0 usecs
calling mv88e6060_init+0x0/0x14 @ 1
initcall mv88e6060_init+0x0/0x14 returned 0 after 5 usecs
calling mv88e6123_61_65_init+0x0/0x14 @ 1
initcall mv88e6123_61_65_init+0x0/0x14 returned 0 after 0 usecs
calling mv88e6131_init+0x0/0x14 @ 1
initcall mv88e6131_init+0x0/0x14 returned 0 after 0 usecs
calling dsa_init_module+0x0/0x12 @ 1
initcall dsa_init_module+0x0/0x12 returned 0 after 41 usecs
calling dcbnl_init+0x0/0x32 @ 1
initcall dcbnl_init+0x0/0x32 returned 0 after 1 usecs
calling mce_debugfs_init+0x0/0x3b @ 1
initcall mce_debugfs_init+0x0/0x3b returned 0 after 14 usecs
calling severities_debugfs_init+0x0/0x3b @ 1
initcall severities_debugfs_init+0x0/0x3b returned 0 after 4 usecs
calling hpet_insert_resource+0x0/0x23 @ 1
initcall hpet_insert_resource+0x0/0x23 returned 0 after 2 usecs
calling update_mp_table+0x0/0x470 @ 1
initcall update_mp_table+0x0/0x470 returned 0 after 0 usecs
calling lapic_insert_resource+0x0/0x40 @ 1
initcall lapic_insert_resource+0x0/0x40 returned 0 after 1 usecs
calling init_lapic_nmi_sysfs+0x0/0x39 @ 1
initcall init_lapic_nmi_sysfs+0x0/0x39 returned 0 after 62 usecs
calling io_apic_bug_finalize+0x0/0x1b @ 1
initcall io_apic_bug_finalize+0x0/0x1b returned 0 after 0 usecs
calling check_early_ioremap_leak+0x0/0x65 @ 1
initcall check_early_ioremap_leak+0x0/0x65 returned 0 after 0 usecs
calling pat_memtype_list_init+0x0/0x29 @ 1
initcall pat_memtype_list_init+0x0/0x29 returned 0 after 4 usecs
calling sched_init_debug+0x0/0x24 @ 1
initcall sched_init_debug+0x0/0x24 returned 0 after 4 usecs
calling init_oops_id+0x0/0x36 @ 1
initcall init_oops_id+0x0/0x36 returned 0 after 3 usecs
calling disable_boot_consoles+0x0/0x45 @ 1
initcall disable_boot_consoles+0x0/0x45 returned 0 after 0 usecs
calling pm_qos_power_init+0x0/0x61 @ 1
initcall pm_qos_power_init+0x0/0x61 returned 0 after 140 usecs
calling software_resume+0x0/0x1f1 @ 1
PM: Resume from disk failed.
initcall software_resume+0x0/0x1f1 returned -2 after 3092 usecs
initcall software_resume+0x0/0x1f1 returned with error code -2
calling debugfs_kprobe_init+0x0/0x8e @ 1
initcall debugfs_kprobe_init+0x0/0x8e returned 0 after 11 usecs
calling taskstats_init+0x0/0x95 @ 1
registered taskstats version 1
initcall taskstats_init+0x0/0x95 returned 0 after 14333 usecs
calling clear_boot_tracer+0x0/0x2d @ 1
initcall clear_boot_tracer+0x0/0x2d returned 0 after 0 usecs
calling max_swapfiles_check+0x0/0x8 @ 1
initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs
calling init_ima+0x0/0x1a @ 1
No TPM chip found, activating TPM-bypass!
initcall init_ima+0x0/0x1a returned 0 after 11690 usecs
calling random32_reseed+0x0/0x92 @ 1
initcall random32_reseed+0x0/0x92 returned 0 after 15 usecs
calling pci_resource_alignment_sysfs_init+0x0/0x19 @ 1
initcall pci_resource_alignment_sysfs_init+0x0/0x19 returned 0 after 3 usecs
calling pci_sysfs_init+0x0/0x4c @ 1
initcall pci_sysfs_init+0x0/0x4c returned 0 after 669 usecs
calling boot_wait_for_devices+0x0/0x19 @ 1
initcall boot_wait_for_devices+0x0/0x19 returned 0 after 0 usecs
calling regulator_init_complete+0x0/0x136 @ 1
initcall regulator_init_complete+0x0/0x136 returned 0 after 1 usecs
calling seqgen_init+0x0/0xf @ 1
initcall seqgen_init+0x0/0xf returned 0 after 9 usecs
calling late_resume_init+0x0/0xf9 @ 1
Magic number: 1:214:992
pci 0000:01:04.6: hash matches
initcall late_resume_init+0x0/0xf9 returned 0 after 28347 usecs
calling scsi_complete_async_scans+0x0/0xfe @ 1
initcall scsi_complete_async_scans+0x0/0xfe returned 0 after 0 usecs
calling rtc_hctosys+0x0/0x167 @ 1
rtc_cmos rtc_cmos: setting system clock to 2009-11-30 15:01:03 UTC (1259593263)
initcall rtc_hctosys+0x0/0x167 returned 0 after 31461 usecs
calling memmap_init+0x0/0xa3 @ 1
initcall memmap_init+0x0/0xa3 returned 0 after 95 usecs
calling pci_mmcfg_late_insert_resources+0x0/0x171 @ 1
initcall pci_mmcfg_late_insert_resources+0x0/0x171 returned 0 after 3 usecs
calling init_net_drop_monitor+0x0/0x147 @ 1
Initalizing network drop monitor service
initcall init_net_drop_monitor+0x0/0x147 returned 0 after 20550 usecs
calling tcp_congestion_default+0x0/0x12 @ 1
initcall tcp_congestion_default+0x0/0x12 returned 0 after 1 usecs
calling initialize_hashrnd+0x0/0x19 @ 1
initcall initialize_hashrnd+0x0/0x19 returned 0 after 2 usecs
async_waiting @ 1
async_continuing @ 1 after 0 usec
Freeing unused kernel memory: 936k freed
Write protecting the kernel read-only data: 6596k
calling cciss_init+0x0/0xa3 [cciss] @ 88
HP CISS Driver (v 3.6.20)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 54
alloc irq_desc for 54 on node 1
alloc kstat_irqs on node 1
cciss 0000:42:08.0: PCI INT A -> Link[LNKA] -> GSI 54 (level, high) -> IRQ 54
alloc irq_desc for 70 on node 1
alloc kstat_irqs on node 1
cciss 0000:42:08.0: irq 70 for MSI/MSI-X
IRQ 70/cciss0: IRQF_DISABLED is not guaranteed on shared IRQs
cciss0: <0x3238> at PCI 0000:42:08.0 IRQ 70 using DAC
cciss/c0d0: p1 p2 p3 p4
cciss/c0d1: p1 p2
initcall cciss_init+0x0/0xa3 [cciss] returned 0 after 249444 usecs
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
calling snd_mem_init+0x0/0x2c [snd_page_alloc] @ 281
calling k8temp_init+0x0/0x20 [k8temp] @ 342
initcall snd_mem_init+0x0/0x2c [snd_page_alloc] returned 0 after 26399 usecs
calling shpcd_init+0x0/0x68 [shpchp] @ 297
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141
initcall k8temp_init+0x0/0x20 [k8temp] returned 0 after 34332 usecs
calling hpwdt_init+0x0/0x20 [hpwdt] @ 474
hpwdt 0000:01:04.0: NMI sourcing is disabled. To enable this functionality you must reboot with nmi_watchdog=0 and load the hpwdt driver with priority=1.
calling init_soundcore+0x0/0x8b [soundcore] @ 281
initcall init_soundcore+0x0/0x8b [soundcore] returned 0 after 45 usecs
calling serio_raw_init+0x0/0x20 [serio_raw] @ 442
initcall serio_raw_init+0x0/0x20 [serio_raw] returned 0 after 52 usecs
hpwdt 0000:01:04.0: PCI INT A -> Link[LNKW] -> GSI 16 (level, high) -> IRQ 16
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
initcall shpcd_init+0x0/0x68 [shpchp] returned 0 after 244261 usecs
calling edac_init+0x0/0xcf [edac_core] @ 347
EDAC MC: Ver: 2.1.0 Nov 30 2009
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_mc_sysfs.c, line at 905: edac_sysfs_setup_mc_kset()
EDAC DEBUG: in drivers/edac/edac_mc_sysfs.c, line at 922: edac_sysfs_setup_mc_kset() Registered '.../edac/mc' kobject
initcall edac_init+0x0/0xcf [edac_core] returned 0 after 10151 usecs
calling i2c_init+0x0/0x70 [i2c_core] @ 465
initcall i2c_init+0x0/0x70 [i2c_core] returned 0 after 104 usecs
calling ipmi_init_msghandler_mod+0x0/0xd [ipmi_msghandler] @ 475
ipmi message handler version 39.2
initcall ipmi_init_msghandler_mod+0x0/0xd [ipmi_msghandler] returned 0 after 66 usecs
calling scsi_tgt_init+0x0/0x82 [scsi_tgt] @ 743
calling amd64_edac_init+0x0/0x1274 [amd64_edac_mod] @ 347
EDAC amd64_edac: Ver: 3.2.0 Nov 30 2009
initcall scsi_tgt_init+0x0/0x82 [scsi_tgt] returned 0 after 33963 usecs
calling init_ipmi_si+0x0/0x78c [ipmi_si] @ 475
IPMI System Interface driver.
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11)
IPMI kcs interface initialized
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: duplicate interface
calling drm_core_init+0x0/0x129 [drm] @ 465
[drm] Initialized drm 1.1.0 20060810
initcall drm_core_init+0x0/0x129 [drm] returned 0 after 93 usecs
calling fc_transport_init+0x0/0x4c [scsi_transport_fc] @ 772
initcall fc_transport_init+0x0/0x4c [scsi_transport_fc] returned 0 after 138 usecs
calling floppy_module_init+0x0/0xd73 [floppy] @ 840
Floppy drive(s): fd0 is 1.44M
calling alsa_sound_init+0x0/0x8f [snd] @ 281
initcall alsa_sound_init+0x0/0x8f [snd] returned 0 after 74 usecs
calling tg3_init+0x0/0x20 [tg3] @ 999
calling alsa_timer_init+0x0/0x187 [snd_timer] @ 281
initcall alsa_timer_init+0x0/0x187 [snd_timer] returned 0 after 88 usecs
EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 3045: (MC node=0,mc_type='RevF')
tg3.c:v3.102 (September 1, 2009)
ACPI: PCI Interrupt Link [LNKZ] enabled at IRQ 19
alloc irq_desc for 19 on node 0
alloc kstat_irqs on node 0
tg3 0000:07:04.0: PCI INT A -> Link[LNKZ] -> GSI 19 (level, high) -> IRQ 19
EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 2365: Addr Map device PCI Bus ID: 0000:00:18.1
calling init_ipmi_devintf+0x0/0x106 [ipmi_devintf] @ 1374
ipmi device interface
initcall init_ipmi_devintf+0x0/0x106 [ipmi_devintf] returned 0 after 136 usecs
EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 2367: DRAM MEM-CTL PCI Bus ID: 0000:00:18.2
EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 2369: Misc device PCI Bus ID: 0000:00:18.3
calling alsa_pcm_init+0x0/0x71 [snd_pcm] @ 1402
initcall alsa_pcm_init+0x0/0x71 [snd_pcm] returned 0 after 17 usecs
EDAC amd64: ECC is enabled by BIOS.
get_cpus_on_this_dct_cpumask: nid: 0, cpu: 0
get_cpus_on_this_dct_cpumask: nid: 0, cpu: 2
amd64_nb_mce_bank_enabled_on_node: weight: 2
EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 2776: core: 0, MCG_CTL: 0x1f, NB MSR is enabled
EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 2776: core: 2, MCG_CTL: 0x0, NB MSR is disabled
=============================================================================
BUG kmalloc-16: Redzone overwritten
-----------------------------------------------------------------------------

INFO: 0xffff88017b0378f8-0xffff88017b0378ff. First byte 0x1f instead of 0xcc
INFO: Slab 0xffffea00052e8c08 objects=102 used=58 fp=0xffff88017b037910 flags=0x400000000000c3
INFO: Object 0xffff88017b0378e8 @offset=2280 fp=0xffff88017b037910

Bytes b4 0xffff88017b0378d8: e8 78 03 7b 01 88 ff ff 5a 5a 5a 5a 5a 5a 5a 5a èx.{..ÿÿZZZZZZZZ
Object 0xffff88017b0378e8: 1f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
Redzone 0xffff88017b0378f8: 1f 00 00 00 00 00 00 00 ........
Padding 0xffff88017b037908: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ
Pid: 822, comm: work_for_cpu Not tainted 2.6.32-rc8 #2
Call Trace:
[<ffffffff81109383>] print_trailer+0x12a/0x133
[<ffffffff81109836>] check_bytes_and_report+0xa9/0xd0
[<ffffffffa009a980>] ? amd64_init_one_instance+0x3b8/0x4db [amd64_edac_mod]
[<ffffffff811098bb>] check_object+0x5e/0x1b6
[<ffffffff8110a889>] __slab_free+0x13a/0x25c
[<ffffffff8110ac2b>] kfree+0xd6/0xe8
[<ffffffffa009a980>] amd64_init_one_instance+0x3b8/0x4db [amd64_edac_mod]
[<ffffffff81072167>] ? do_work_for_cpu+0x0/0x2b
[<ffffffff812062e5>] local_pci_probe+0x17/0x1b
[<ffffffff8107217f>] do_work_for_cpu+0x18/0x2b
[<ffffffff81072167>] ? do_work_for_cpu+0x0/0x2b
[<ffffffff810769fb>] kthread+0x6e/0x76
[<ffffffff81012daa>] child_rip+0xa/0x20
[<ffffffff8107698d>] ? kthread+0x0/0x76
[<ffffffff81012da0>] ? child_rip+0x0/0x20
FIX kmalloc-16: Restoring 0xffff88017b0378f8-0xffff88017b0378ff=0xcc

EDAC amd64: NB MCE bank disabled, set MSR 0x0000017b[4] on node 0 to enable.
EDAC amd64: WARNING: ECC is disabled by BIOS. Module will NOT be loaded.
Either Enable ECC in the BIOS, or set 'ecc_enable_override'.
Also, use of the override can cause unknown side effects.
EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 3054: ret=-22
amd64_edac: probe of 0000:00:18.2 failed with error -22
hpwdt: New timer passed in is 30 seconds.
calling ttm_init+0x0/0x6f [ttm] @ 465
initcall ttm_init+0x0/0x6f [ttm] returned 0 after 70 usecs
EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 3045: (MC node=1,mc_type='RevF')
eth2: Tigon3 [partno(011276-001) rev 9003] (PCIX:133MHz:64-bit) MAC address 00:18:fe:34:1c:2f
eth2: attached PHY is 5714 (1000Base-SX Ethernet) (WireSpeed[0])
eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
eth2: dma_rwctrl[76148000] dma_mask[40-bit]
tg3 0000:07:04.1: PCI INT B -> Link[LNKW] -> GSI 16 (level, high) -> IRQ 16
hp Watchdog Timer Driver: 1.1.1, timer margin: 30 seconds (nowayout=0), allow kernel dump: OFF (default = 0/OFF), priority: LAST (default = 0/LAST).
floppy0: no floppy controllers found
initcall floppy_module_init+0x0/0xd73 [floppy] returned -19 after 2974819 usecs
EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 2365: Addr Map device PCI Bus ID: 0000:00:19.1
EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 2367: DRAM MEM-CTL PCI Bus ID: 0000:00:19.2
EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 2369: Misc device PCI Bus ID: 0000:00:19.3
EDAC amd64: ECC is enabled by BIOS.
get_cpus_on_this_dct_cpumask: nid: 1, cpu: 1
get_cpus_on_this_dct_cpumask: nid: 1, cpu: 3
amd64_nb_mce_bank_enabled_on_node: weight: 2
EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 2776: core: 1, MCG_CTL: 0x1f, NB MSR is enabled
EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 2776: core: 3, MCG_CTL: 0x0, NB MSR is disabled
=============================================================================
BUG kmalloc-16: Redzone overwritten
-----------------------------------------------------------------------------

INFO: 0xffff88027a50e858-0xffff88027a50e85f. First byte 0x1f instead of 0xcc
INFO: Slab 0xffffea0008ac1b10 objects=102 used=54 fp=0xffff88027a50e870 flags=0xc00000000000c3
INFO: Object 0xffff88027a50e848 @offset=2120 fp=0xffff88027a50e870

Bytes b4 0xffff88027a50e838: 48 e8 50 7a 02 88 ff ff 5a 5a 5a 5a 5a 5a 5a 5a HèPz..ÿÿZZZZZZZZ
Object 0xffff88027a50e848: 1f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
Redzone 0xffff88027a50e858: 1f 00 00 00 00 00 00 00 ........
Padding 0xffff88027a50e868: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ
Pid: 1605, comm: work_for_cpu Not tainted 2.6.32-rc8 #2
Call Trace:
[<ffffffff81109383>] print_trailer+0x12a/0x133
[<ffffffff81109836>] check_bytes_and_report+0xa9/0xd0
[<ffffffffa009a980>] ? amd64_init_one_instance+0x3b8/0x4db [amd64_edac_mod]
[<ffffffff811098bb>] check_object+0x5e/0x1b6
[<ffffffff8110a889>] __slab_free+0x13a/0x25c
[<ffffffff8110ac2b>] kfree+0xd6/0xe8
[<ffffffffa009a980>] amd64_init_one_instance+0x3b8/0x4db [amd64_edac_mod]
[<ffffffff81072167>] ? do_work_for_cpu+0x0/0x2b
[<ffffffff812062e5>] local_pci_probe+0x17/0x1b
[<ffffffff8107217f>] do_work_for_cpu+0x18/0x2b
[<ffffffff81072167>] ? do_work_for_cpu+0x0/0x2b
[<ffffffff810769fb>] kthread+0x6e/0x76
[<ffffffff81012daa>] child_rip+0xa/0x20
[<ffffffff8107698d>] ? kthread+0x0/0x76
[<ffffffff81012da0>] ? child_rip+0x0/0x20
FIX kmalloc-16: Restoring 0xffff88027a50e858-0xffff88027a50e85f=0xcc

EDAC amd64: NB MCE bank disabled, set MSR 0x0000017b[4] on node 1 to enable.
EDAC amd64: WARNING: ECC is disabled by BIOS. Module will NOT be loaded.
Either Enable ECC in the BIOS, or set 'ecc_enable_override'.
Also, use of the override can cause unknown side effects.
EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 3054: ret=-22
amd64_edac: probe of 0000:00:19.2 failed with error -22
initcall amd64_edac_init+0x0/0x1274 [amd64_edac_mod] returned 0 after 3643940 usecs
initcall hpwdt_init+0x0/0x20 [hpwdt] returned 0 after 5290823 usecs
ipmi_si 0000:01:04.6: PCI INT A -> Link[LNKW] -> GSI 16 (level, high) -> IRQ 16
ipmi_si: Trying PCI-specified kcs state machine at mem address 0xf7ef0000, slave address 0x0, irq 16
eth3: Tigon3 [partno(011276-001) rev 9003] (PCIX:133MHz:64-bit) MAC address 00:18:fe:34:1c:30
eth3: attached PHY is 5714 (1000Base-SX Ethernet) (WireSpeed[0])
eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
eth3: dma_rwctrl[76148000] dma_mask[40-bit]
initcall tg3_init+0x0/0x20 [tg3] returned 0 after 4353425 usecs
IRQ 16/ipmi_si: IRQF_DISABLED is not guaranteed on shared IRQs
Using irq 16
calling alsa_mixer_oss_init+0x0/0x3a [snd_mixer_oss] @ 1597
initcall alsa_mixer_oss_init+0x0/0x3a [snd_mixer_oss] returned 0 after 1 usecs
ipmi: interfacing existing BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11)
IPMI kcs interface initialized
initcall init_ipmi_si+0x0/0x78c [ipmi_si] returned 0 after 4921330 usecs
calling alsa_pcm_oss_init+0x0/0xa5 [snd_pcm_oss] @ 1597
initcall alsa_pcm_oss_init+0x0/0xa5 [snd_pcm_oss] returned 0 after 352 usecs
calling radeon_init+0x0/0xc5 [radeon] @ 465
[drm] radeon defaulting to kernel modesetting.
calling alsa_seq_device_init+0x0/0x60 [snd_seq_device] @ 1697
initcall alsa_seq_device_init+0x0/0x60 [snd_seq_device] returned 0 after 12 usecs
calling alsa_seq_init+0x0/0x57 [snd_seq] @ 1700
initcall alsa_seq_init+0x0/0x57 [snd_seq] returned 0 after 114 usecs
calling alsa_seq_midi_event_init+0x0/0x8 [snd_seq_midi_event] @ 1700
initcall alsa_seq_midi_event_init+0x0/0x8 [snd_seq_midi_event] returned 0 after 0 usecs
calling alsa_seq_oss_init+0x0/0x19e [snd_seq_oss] @ 1700
calling alsa_seq_dummy_init+0x0/0xcd [snd_seq_dummy] @ 1713
initcall alsa_seq_dummy_init+0x0/0xcd [snd_seq_dummy] returned 0 after 14 usecs
initcall alsa_seq_oss_init+0x0/0x19e [snd_seq_oss] returned 0 after 68160 usecs
calling lpfc_init+0x0/0xd3 [lpfc] @ 772
Emulex LightPulse Fibre Channel SCSI driver 8.3.4
Copyright(c) 2004-2009 Emulex. All rights reserved.
ACPI: PCI Interrupt Link [LNKY] enabled at IRQ 18
alloc irq_desc for 18 on node 0
alloc kstat_irqs on node 0
lpfc 0000:08:00.0: PCI INT A -> Link[LNKY] -> GSI 18 (level, high) -> IRQ 18
lpfc 0000:08:00.0: setting latency timer to 64
calling pcsp_init+0x0/0x20 [snd_pcsp] @ 281
input: PC Speaker as /class/input/input4
initcall pcsp_init+0x0/0x20 [snd_pcsp] returned 0 after 850 usecs
calling pcspkr_init+0x0/0x12 [pcspkr] @ 281
Error: Driver 'pcspkr' is already registered, aborting...
initcall pcspkr_init+0x0/0x12 [pcspkr] returned -16 after 3 usecs
initcall pcspkr_init+0x0/0x12 [pcspkr] returned with error code -16
[drm] radeon kernel modesetting enabled.
radeon 0000:01:03.0: PCI INT A -> Link[LNKY] -> GSI 18 (level, high) -> IRQ 18
scsi0 : on PCI bus 08 device 00 irq 18
[drm] radeon: Initializing kernel modesetting.
[drm] register mmio base: 0xF7FF0000
[drm] register mmio size: 65536
[drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[drm] radeon: VRAM 64M
[drm] radeon: VRAM from 0x00000000 to 0x03FFFFFF
[drm] radeon: GTT 512M
[drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF
[drm] radeon: irq initialized.
[drm] Detected VRAM RAM=64M, BAR=128M
[drm] RAM width 16bits DDR
[TTM] Zone kernel: Available graphics memory: 4097704 kiB.
[TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[drm] radeon: 32M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] radeon: cp idle (0x00008080)
[drm] Loading R100 Microcode
platform radeon_cp.0: firmware: requesting radeon/R100_cp.bin
[drm] radeon: ring at 0x0000000020000000
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA
[drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm] Encoders:
[drm] CRT1: INTERNAL_DAC1
[drm] Connector 1:
[drm] VGA
[drm] DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c
[drm] Encoders:
[drm] CRT2: INTERNAL_DAC2
lpfc 0000:08:00.1: PCI INT B -> Link[LNKZ] -> GSI 19 (level, high) -> IRQ 19
lpfc 0000:08:00.1: setting latency timer to 64
[drm] fb mappable at 0xE8040000
[drm] vram apper at 0xE8000000
[drm] size 1920000
[drm] fb depth is 24
[drm] pitch is 3200
scsi1 : on PCI bus 08 device 01 irq 19
lpfc 0000:08:00.0: 0:1303 Link Up Event x1 received Data: x1 xf7 x10 x2 x0 x0 0
[drm] DAC-8: set mode 800x600 19
Console: switching to colour frame buffer device 100x37
fb0: radeondrmfb frame buffer device
registered panic notifier
[drm] Initialized radeon 2.0.0 20080528 for 0000:01:03.0 on minor 0
initcall radeon_init+0x0/0xc5 [radeon] returned 0 after 3123526 usecs
scsi 0:0:0:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4
scsi 0:0:0:0: Attached scsi generic sg0 type 12
scsi 0:0:1:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4
scsi 0:0:1:0: Attached scsi generic sg1 type 12
scsi 0:0:1:8: Direct-Access COMPAQ MSA1000 VOLUME 5.20 PQ: 0 ANSI: 4
sd 0:0:1:8: Attached scsi generic sg2 type 0
sd 0:0:1:8: [sda] 2187605616 512-byte logical blocks: (1.12 TB/1.01 TiB)
sd 0:0:1:8: [sda] Write Protect is off
sd 0:0:1:8: [sda] Mode Sense: 83 00 00 08
sd 0:0:1:8: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
scsi 0:0:2:0: Enclosure HP MSA2212fc J200 PQ: 0 ANSI: 5
sd 0:0:1:8: [sda] Attached SCSI disk
scsi 0:0:2:0: Attached scsi generic sg3 type 13
calling enclosure_init+0x0/0x19 [enclosure] @ 2024
initcall enclosure_init+0x0/0x19 [enclosure] returned 0 after 45 usecs
calling ses_init+0x0/0x40 [ses] @ 2024
ses 0:0:2:0: Attached Enclosure device
initcall ses_init+0x0/0x40 [ses] returned 0 after 22668 usecs
initcall lpfc_init+0x0/0xd3 [lpfc] returned 0 after 4286622 usecs
lpfc 0000:08:00.1: 1:1303 Link Up Event x1 received Data: x1 xf7 x10 x2 x0 x0 0
calling floppy_module_init+0x0/0xd73 [floppy] @ 2150
Floppy drive(s): fd0 is 1.44M
scsi 1:0:0:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4
scsi 1:0:0:0: Attached scsi generic sg4 type 12
scsi 1:0:1:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4
scsi 1:0:1:0: Attached scsi generic sg5 type 12
scsi 1:0:1:8: Direct-Access COMPAQ MSA1000 VOLUME 5.20 PQ: 0 ANSI: 4
sd 1:0:1:8: Attached scsi generic sg6 type 0
sd 1:0:1:8: [sdb] 2187605616 512-byte logical blocks: (1.12 TB/1.01 TiB)
scsi 1:0:2:0: Enclosure HP MSA2212fc J200 PQ: 0 ANSI: 5
ses 1:0:2:0: Attached Enclosure device
ses 1:0:2:0: Attached scsi generic sg7 type 13
sd 1:0:1:8: [sdb] Write Protect is off
sd 1:0:1:8: [sdb] Mode Sense: 83 00 00 08
sd 1:0:1:8: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 1:0:1:8: [sdb] Attached SCSI disk
floppy0: no floppy controllers found
initcall floppy_module_init+0x0/0xd73 [floppy] returned -19 after 2984640 usecs
calling parport_default_proc_register+0x0/0x1b [parport] @ 2415
initcall parport_default_proc_register+0x0/0x1b [parport] returned 0 after 9 usecs
calling lp_init_module+0x0/0x274 [lp] @ 2417
calling parport_pc_init+0x0/0x357 [parport_pc] @ 2420
initcall parport_pc_init+0x0/0x357 [parport_pc] returned 0 after 789 usecs
lp: driver loaded but no devices found
initcall lp_init_module+0x0/0x274 [lp] returned 0 after 143555 usecs
calling acpi_memory_device_init+0x0/0x7a [acpi_memhotplug] @ 2452
initcall acpi_memory_device_init+0x0/0x7a [acpi_memhotplug] returned 0 after 6490 usecs
calling acpi_smb_hc_init+0x0/0x18 [sbshc] @ 2461
initcall acpi_smb_hc_init+0x0/0x18 [sbshc] returned 0 after 330 usecs
calling acpi_sbs_init+0x0/0x4f [sbs] @ 2467
initcall acpi_sbs_init+0x0/0x4f [sbs] returned 0 after 73 usecs
calling video_output_class_init+0x0/0x19 [output] @ 2470
initcall video_output_class_init+0x0/0x19 [output] returned 0 after 45 usecs
calling acpi_video_init+0x0/0x70 [video] @ 2470
initcall acpi_video_init+0x0/0x70 [video] returned 0 after 235 usecs
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
EXT3 FS on cciss/c0d0p3, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on cciss/c0d0p1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Can't find ext3 filesystem on dev cciss/c0d0p4.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on cciss/c0d1p1, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on cciss/c0d1p2, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
Adding 8385920k swap on /dev/cciss/c0d0p2. Priority:-1 extents:1 across:8385920k
warning: process `kudzu' used the deprecated sysctl system call with 1.23.
calling inet6_init+0x0/0x2b2 [ipv6] @ 2676
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
initcall inet6_init+0x0/0x2b2 [ipv6] returned 0 after 55837 usecs
process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.default.retrans_time; Use net.ipv6.neigh.default.retrans_time_ms instead.
calling init_sunrpc+0x0/0x5d [sunrpc] @ 3088
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
initcall init_sunrpc+0x0/0x5d [sunrpc] returned 0 after 98390 usecs
warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use)
calling rfkill_init+0x0/0x79 [rfkill] @ 3148
initcall rfkill_init+0x0/0x79 [rfkill] returned 0 after 142 usecs
calling bt_init+0x0/0x5d [bluetooth] @ 3148
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
initcall bt_init+0x0/0x5d [bluetooth] returned 0 after 112466 usecs
calling l2cap_init+0x0/0xe5 [l2cap] @ 3169
Bluetooth: L2CAP ver 2.14
Bluetooth: L2CAP socket layer initialized
initcall l2cap_init+0x0/0xe5 [l2cap] returned 0 after 49672 usecs
calling rfcomm_init+0x0/0xd4 [rfcomm] @ 3169
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
initcall rfcomm_init+0x0/0xd4 [rfcomm] returned 0 after 80599 usecs
calling init_rpcsec_gss+0x0/0x4d [auth_rpcgss] @ 3196
initcall init_rpcsec_gss+0x0/0x4d [auth_rpcgss] returned 0 after 39 usecs
calling fscache_init+0x0/0xab [fscache] @ 3196
Slow work thread pool: Starting up
Slow work thread pool: Ready
FS-Cache: Loaded
initcall fscache_init+0x0/0xab [fscache] returned 0 after 65684 usecs
calling init_nlm+0x0/0x22 [lockd] @ 3196
initcall init_nlm+0x0/0x22 [lockd] returned 0 after 11 usecs
calling init_nfs_fs+0x0/0x139 [nfs] @ 3196
FS-Cache: Netfs 'nfs' registered for caching
initcall init_nfs_fs+0x0/0x139 [nfs] returned 0 after 22579 usecs
svc: failed to register lockdv1 RPC service (errno 97).
VFS: Can't find ext3 filesystem on dev cciss/c0d0p4.
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount force-fb(V) show-blocked-tasks(W) dump-ftrace-buffer(Z)
calling hidp_init+0x0/0x60 [hidp] @ 3275
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
initcall hidp_init+0x0/0x60 [hidp] returned 0 after 27119 usecs
calling init_autofs4_fs+0x0/0x26 [autofs4] @ 3289
initcall init_autofs4_fs+0x0/0x26 [autofs4] returned 0 after 201 usecs
eth0: no IPv6 routers present
rport-0:0-19: blocked FC remote port time out: removing rport
rport-1:0-20: blocked FC remote port time out: removing rport

Next message: Linus Torvalds: "Re: [rfc] "fair" rw spinlocks"
Previous message: Benjamin Herrenschmidt: "[git pull] Please pull powerpc.git merge branch"
In reply to: Randy Dunlap: "Re: 2.6.32-rc8: amd64_edac slub error"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]