Re: [PATCH 0/9] pci: update pci bridge resource to get more big rangefor devices under it - v13

[Kenji Kaneshige]

Yinghai Lu wrote:
> Kenji Kaneshige wrote:
> > My system doesn't boot (hangup) with the following error messages
> > from Fusion MPT SAS driver. Those are different from the one
> > captured with the previous version of your patches.
> >
> >
> > Fusion MPT SAS Host driver 3.04.12
> > mptsas 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> > mptbase: ioc0: Initiating bringup
> > mptbase: ioc0: WARNING - Unexpected doorbell active!
> > mptbase: ioc0: ERROR - Failed to come READY after reset! IocState=f0000000
> > mptbase: ioc0: WARNING - ResetHistory bit failed to clear!
> > mptbase: ioc0: ERROR - Diagnostic reset FAILED! (ffffffffh)
> > mptbase: ioc0: WARNING - NOT READY WARNING!
> > mptbase: ioc0: ERROR - didn't initialize properly! (-1)
> > mptsas: probe of 0000:09:00.0 failed with error -1
> > mptsas 0000:0a:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
> > mptbase: ioc1: Initiating bringup
> > mptbase: ioc1: WARNING - Unexpected doorbell active!
> > mptbase: ioc1: ERROR - Failed to come READY after reset! IocState=f0000000
> > mptbase: ioc1: WARNING - ResetHistory bit failed to clear!
> > mptbase: ioc1: ERROR - Diagnostic reset FAILED! (ffffffffh)
> > mptbase: ioc1: WARNING - NOT READY WARNING!
> > mptbase: ioc1: ERROR - didn't initialize properly! (-1)
> > mptsas: probe of 0000:0a:00.0 failed with error -1
> >
> >
> > I'll send the whole boot log privately.
>
> thanks, at the same time please try "debug pci=try=1"

I confirmed system boot up without errors by "pci=try=1".
I'll capture the bootlog with "debug" option and send it
to you soon.

Thanks,
Kenji Kaneshige


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/