Re: regression: 2.6.32-rc8 shuts down after reaching criticaltemperature

[Len Brown]

On Wed, 25 Nov 2009, Christoph Hellwig wrote:

> I recently upgraded my Thinkpad T500 from Linux 2.6.31 to Linux
> 2.6.32-rc (first -rc7 but I've also tried with -rc6 and -rc8) and when
> putting load on it, e.g. by building a kernel tree.  It shuts down soon
> with the
> 
> 	Critical temperature reached (%ld C), shutting down.\n"
> 
> printk from drivers/thermal/thermal_sys.c, where the temperature is
> usually 100C or slightly above.  The system is a Lenovo Thinkpad T500
> with a Intel Core 2 Dueo T9600 running a 32 bit kernel.

"thermal.nocrt=1" will disable the actual shutdown -- but you'll
still get the warning -- which might be helpful.  "thermal.crt=105"
would override all critical trip points to be 105, for example,
but otherwise not change any behaviour.

> I've done some attempts at bisecting it, but for most of the 2.6.32-rc
> series the system crashes during boot in ACPI code with a backtrace
> longer than the screen can display.

Hmm, I don't have a T500, but I've not seen such crashes during -rc.
Please send along your .config
Do you still get them when disabling the thinkpad-acpi driver?

Probably the most interesting place to bisect is drivers/acpi/ec.c

If you can send along the dmesg from the recent failing kernel,
plus the output from "grep . /proc/acpi/thermal_zone/*/*"
that may be helpful.

thanks,
-Len

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/