Re: [PATCH v2] Add poll_get_char and poll_put_char uart_ops toatmel_serial.

From: Albin Tonnerre
Date: Wed Nov 11 2009 - 06:37:27 EST


Andrew, could you please pick this up ? It got:

Acked-by: Haavard Skinnemoen <haavard.skinnemoen@xxxxxxxxx>
Acked-by: Andrew Victor <linux@xxxxxxxxxxxx>

Regards,
Albin

On Mon, 07 Sep 2009 11:52 +0200, Albin Tonnerre wrote :
> This patch allows using KGDB over the console with the atmel_serial
> driver.
>
> Signed-off-by: Albin Tonnerre <albin.tonnerre@xxxxxxxxxxxxxxxxxx>
> ---
> changes: Use register access macros instead of __raw_readl/writel
>
> drivers/serial/atmel_serial.c | 22 ++++++++++++++++++++++
> 1 files changed, 22 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
> index 607d43a..c562883 100644
> --- a/drivers/serial/atmel_serial.c
> +++ b/drivers/serial/atmel_serial.c
> @@ -1213,6 +1213,24 @@ static int atmel_verify_port(struct uart_port *port, struct serial_struct *ser)
> return ret;
> }
>
> +#ifdef CONFIG_CONSOLE_POLL
> +static int atmel_poll_get_char(struct uart_port *port)
> +{
> + while (!(UART_GET_CSR(port) & ATMEL_US_RXRDY))
> + barrier();
> +
> + return UART_GET_CHAR(port);
> +}
> +
> +static void atmel_poll_put_char(struct uart_port *port, unsigned char ch)
> +{
> + while (!(UART_GET_CSR(port) & ATMEL_US_TXRDY))
> + barrier();
> +
> + UART_PUT_CHAR(port, ch);
> +}
> +#endif
> +
> static struct uart_ops atmel_pops = {
> .tx_empty = atmel_tx_empty,
> .set_mctrl = atmel_set_mctrl,
> @@ -1232,6 +1250,10 @@ static struct uart_ops atmel_pops = {
> .config_port = atmel_config_port,
> .verify_port = atmel_verify_port,
> .pm = atmel_serial_pm,
> +#ifdef CONFIG_CONSOLE_POLL
> + .poll_get_char = atmel_poll_get_char,
> + .poll_put_char = atmel_poll_put_char,
> +#endif
> };
>
> /*
--
Albin Tonnerre, Free Electrons
Kernel, drivers and embedded Linux development,
consulting, training and support.
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/