Fix syntax of mdio.txt to match actual syntax.

From: Lennart Sorensen
Date: Mon Nov 09 2009 - 13:56:49 EST


The syntax in Documentation/powerpc/dts-bindings/gpio/mdio.txt is not
up to date and no longer works. Fix this as well as actually show how
to represent a PHY on the gpio-bitbang bus.

Tested with 2.6.31 on a RuggedCom RX5000 (mpc8360e based).

Signed-off-by: Lennart Sorensen <lsorense@xxxxxxxxxxxxxxxxxxx>

diff --git a/Documentation/powerpc/dts-bindings/gpio/mdio.txt b/Documentation/powerpc/dts-bindings/gpio/mdio.txt
index bc95495..7a84f25 100644
--- a/Documentation/powerpc/dts-bindings/gpio/mdio.txt
+++ b/Documentation/powerpc/dts-bindings/gpio/mdio.txt
@@ -14,6 +14,15 @@ mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
- gpios = <&qe_pio_a 11
- &qe_pio_c 6>;
+ gpios = <&qe_pio_a 11 0
+ &qe_pio_c 6 0>;
+
+ phy0: ethernet-phy@00 {
+ reg = <0x18>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@01 {
+ reg = <0x0f>;
+ device_type = "ethernet-phy";
+ };
};
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/