Re: drm/ksm -> s2disk -> resume -> [drm:r100_ring_test] ERROR radeon: ring test failed (sracth(0x15E4)=0xCAFEDEAD)

From: Christian Hartmann
Date: Fri Nov 06 2009 - 10:54:37 EST

Next message: Bjorn Helgaas: "Re: linux-next: Tree for November 5"
Previous message: Martin Schleier: "Re: i686 quirk for AMD Geode"
In reply to: Christian Hartmann: "drm/ksm -> s2disk -> resume -> [drm:r100_ring_test] *ERROR* radeon: ring test failed (sracth(0x15E4)=0xCAFEDEAD)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

hello,

here the dmesg from boot before resume. the first dmesg was truncated..

2009/11/6 Christian Hartmann <cornogle@xxxxxxxxxxxxxx>:
> radeon driver is broken after resume, I have to reboot everytime.
>
> [ 170.805463] [drm:r100_ring_test] *ERROR* radeon: ring test failed
> (sracth(0x15E4)=0xCAFEDEAD)
> [ 170.805471] [drm:r100_cp_init] *ERROR* radeon: cp isn't working (-22).
>
> Could it be (Im am really not sure yet), that i have included the
> firmware R100_cp.bin into the kernel space?
yes, I have included it. But ...
> ...why is this not working after a normal resume?

me again, chris h.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-rc6 (chris@oddysseus) (gcc version 4.3.4 (Debian 4.3.4-6) ) #2 PREEMPT Fri Nov 6 14:18:38 CET 2009
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff60000 (usable)
[ 0.000000] BIOS-e820: 000000003ff60000 - 000000003ff6e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ff6e000 - 000000003ff80000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x3ff60 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DBFFF uncachable
[ 0.000000] DC000-DFFFF write-back
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03FF80000 mask FFFF80000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Warning only 895MB will be used.
[ 0.000000] Use a HIGHMEM enabled kernel.
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000037fa1000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037c00000 page 2M
[ 0.000000] 0037c00000 - 0037fa1000 page 4k
[ 0.000000] kernel direct mapping tables up to 37fa1000 @ 7000-c000
[ 0.000000] RAMDISK: 2f1e2000 - 2ffc790a
[ 0.000000] ACPI: RSDP 000f7010 00024 (v02 IBM )
[ 0.000000] ACPI: XSDT 3ff63397 0004C (v01 IBM TP-1I 00002032 LTP 00000000)
[ 0.000000] ACPI: FACP 3ff633e3 00081 (v01 IBM TP-1I 00002032 IBM 00000001)
[ 0.000000] ACPI: DSDT 3ff634ca 0AA8A (v01 IBM TP-1I 00002032 MSFT 0100000D)
[ 0.000000] ACPI: FACS 3ff7f000 00040
[ 0.000000] ACPI: SSDT 3ff63497 00033 (v01 IBM TP-1I 00002032 MSFT 0100000D)
[ 0.000000] ACPI: ECDT 3ff6df54 00052 (v01 IBM TP-1I 00002032 IBM 00000001)
[ 0.000000] ACPI: TCPA 3ff6dfa6 00032 (v01 IBM TP-1I 00002032 PTL 00000001)
[ 0.000000] ACPI: BOOT 3ff6dfd8 00028 (v01 IBM TP-1I 00002032 LTP 00000001)
[ 0.000000] 895MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37fa1000
[ 0.000000] low ram: 0 - 37fa1000
[ 0.000000] node 0 low ram: 00000000 - 37fa1000
[ 0.000000] node 0 bootmap 00008000 - 0000eff8
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0037fa1000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000100000 - 0000668bc0] TEXT DATA BSS ==> [0000100000 - 0000668bc0]
[ 0.000000] #2 [002f1e2000 - 002ffc790a] RAMDISK ==> [002f1e2000 - 002ffc790a]
[ 0.000000] #3 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #4 [0000669000 - 000066c10f] BRK ==> [0000669000 - 000066c10f]
[ 0.000000] #5 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #6 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00037fa1
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00037fa1
[ 0.000000] On node 0 totalpages: 229184
[ 0.000000] free_area_init_node: node 0, pgdat c057a9f4, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223425 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] Local APIC disabled by BIOS -- reenabling.
[ 0.000000] Found and enabled local APIC!
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bf800000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227392
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-rc6 root=UUID=cc527f28-a768-4379-accb-56069aee2d0a ro CONSOLE=/dev/tty1 radeon.modeset=1 gfxpayload=1024x768x24 splash drm.debug=0x0 lapic resume=/dev/hda5
[ 0.000000] Unknown boot option `radeon.modeset=1': ignoring
[ 0.000000] Unknown boot option `drm.debug=0x0': ignoring
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Memory: 888752k/917124k available (3191k kernel code, 27772k reserved, 1425k data, 440k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffa3000 - 0xfffff000 ( 368 kB)
[ 0.000000] vmalloc : 0xf87a1000 - 0xfffa1000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7fa1000 ( 895 MB)
[ 0.000000] .init : 0xc0583000 - 0xc05f1000 ( 440 kB)
[ 0.000000] .data : 0xc041df85 - 0xc058277c (1425 kB)
[ 0.000000] .text : 0xc0100000 - 0xc041df85 (3191 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:288
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1798.504 MHz processor.
[ 0.002006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3597.00 BogoMIPS (lpj=1798504)
[ 0.002271] Security Framework initialized
[ 0.002367] SELinux: Disabled at boot.
[ 0.003036] Mount-cache hash table entries: 512
[ 0.003325] Initializing cgroup subsys ns
[ 0.003422] Initializing cgroup subsys cpuacct
[ 0.003515] Initializing cgroup subsys devices
[ 0.003608] Initializing cgroup subsys freezer
[ 0.003700] Initializing cgroup subsys net_cls
[ 0.003835] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.003959] CPU: L2 cache: 512K
[ 0.004011] mce: CPU supports 4 MCE banks
[ 0.004117] CPU0: Thermal monitoring enabled (TM1)
[ 0.004228] Performance Events: no PMU driver, software events only.
[ 0.004354] CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 1.80GHz stepping 07
[ 0.004517] Checking 'hlt' instruction... OK.
[ 0.011222] ACPI: Core revision 20090903
[ 0.038664] ACPI: setting ELCR to 0200 (from 0800)
[ 0.039009] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.039114] ftrace: allocating 19000 entries in 38 pages
[ 0.041993] device: 'platform': device_add
[ 0.041993] PM: Adding info for No Bus:platform
[ 0.041993] bus: 'platform': registered
[ 0.041993] Registering sysdev class 'cpu'
[ 0.041993] Registering sysdev class 'lapic'
[ 0.041993] Registering sys device of class 'lapic'
[ 0.041993] Registering sys device 'lapic0'
[ 0.042071] regulator: core version 0.5
[ 0.042173] device class 'regulator': registering
[ 0.042320] bus: 'virtio': registered
[ 0.042420] NET: Registered protocol family 16
[ 0.042535] device class 'bdi': registering
[ 0.042622] device class 'pci_bus': registering
[ 0.042759] bus: 'pci': registered
[ 0.042764] device class 'backlight': registering
[ 0.042822] device class 'tty': registering
[ 0.042880] device class 'vtconsole': registering
[ 0.042941] device: 'vtcon0': device_add
[ 0.042964] PM: Adding info for No Bus:vtcon0
[ 0.043126] bus: 'i2c': registered
[ 0.043136] bus: 'i2c': add driver dummy
[ 0.043216] ACPI: bus type pci registered
[ 0.043312] device class 'dmi': registering
[ 0.043373] device: 'id': device_add
[ 0.043404] PM: Adding info for No Bus:id
[ 0.043479] device class 'dma': registering
[ 0.043725] PCI: PCI BIOS revision 2.10 entry at 0xfd8fe, last bus=8
[ 0.043822] PCI: Using configuration type 1 for base access
[ 0.043927] Registering sys device of class 'cpu'
[ 0.043936] Registering sys device 'cpu0'
[ 0.051378] device: 'default': device_add
[ 0.051401] PM: Adding info for No Bus:default
[ 0.051626] bio: create slab <bio-0> at 0
[ 0.051754] device class 'block': registering
[ 0.051900] device class 'graphics': registering
[ 0.053697] ACPI: EC: EC description table is found, configuring boot EC
[ 0.067962] ACPI: Interpreter enabled
[ 0.067999] ACPI: (supports S0 S3 S4 S5)
[ 0.068240] ACPI: Using PIC for interrupt routing
[ 0.068465] bus: 'acpi': registered
[ 0.068494] device: 'LNXSYSTM:00': device_add
[ 0.068507] bus: 'acpi': add device LNXSYSTM:00
[ 0.068517] PM: Adding info for acpi:LNXSYSTM:00
[ 0.068626] device: 'LNXCPU:00': device_add
[ 0.068634] bus: 'acpi': add device LNXCPU:00
[ 0.068642] PM: Adding info for acpi:LNXCPU:00
[ 0.068735] device: 'LNXSYBUS:00': device_add
[ 0.068744] bus: 'acpi': add device LNXSYBUS:00
[ 0.068752] PM: Adding info for acpi:LNXSYBUS:00
[ 0.069311] device: 'PNP0C0F:00': device_add
[ 0.069320] bus: 'acpi': add device PNP0C0F:00
[ 0.069329] PM: Adding info for acpi:PNP0C0F:00
[ 0.069790] device: 'PNP0C0F:01': device_add
[ 0.069798] bus: 'acpi': add device PNP0C0F:01
[ 0.069806] PM: Adding info for acpi:PNP0C0F:01
[ 0.070288] device: 'PNP0C0F:02': device_add
[ 0.070296] bus: 'acpi': add device PNP0C0F:02
[ 0.070305] PM: Adding info for acpi:PNP0C0F:02
[ 0.070747] device: 'PNP0C0F:03': device_add
[ 0.070756] bus: 'acpi': add device PNP0C0F:03
[ 0.070765] PM: Adding info for acpi:PNP0C0F:03
[ 0.071237] device: 'PNP0C0F:04': device_add
[ 0.071246] bus: 'acpi': add device PNP0C0F:04
[ 0.071254] PM: Adding info for acpi:PNP0C0F:04
[ 0.071645] device: 'PNP0C0F:05': device_add
[ 0.071654] bus: 'acpi': add device PNP0C0F:05
[ 0.071662] PM: Adding info for acpi:PNP0C0F:05
[ 0.072076] device: 'PNP0C0F:06': device_add
[ 0.072085] bus: 'acpi': add device PNP0C0F:06
[ 0.072093] PM: Adding info for acpi:PNP0C0F:06
[ 0.072486] device: 'PNP0C0F:07': device_add
[ 0.072495] bus: 'acpi': add device PNP0C0F:07
[ 0.072504] PM: Adding info for acpi:PNP0C0F:07
[ 0.072626] device: 'PNP0C01:00': device_add
[ 0.072635] bus: 'acpi': add device PNP0C01:00
[ 0.072643] PM: Adding info for acpi:PNP0C01:00
[ 0.073061] device: 'PNP0C0D:00': device_add
[ 0.073072] bus: 'acpi': add device PNP0C0D:00
[ 0.073082] PM: Adding info for acpi:PNP0C0D:00
[ 0.073366] device: 'PNP0C0E:00': device_add
[ 0.073366] bus: 'acpi': add device PNP0C0E:00
[ 0.073366] PM: Adding info for acpi:PNP0C0E:00
[ 0.073366] device: 'PNP0A03:00': device_add
[ 0.073366] bus: 'acpi': add device PNP0A03:00
[ 0.073366] PM: Adding info for acpi:PNP0A03:00
[ 0.074078] device: 'device:00': device_add
[ 0.074086] bus: 'acpi': add device device:00
[ 0.074098] PM: Adding info for acpi:device:00
[ 0.074213] device: 'PNP0C02:00': device_add
[ 0.074220] bus: 'acpi': add device PNP0C02:00
[ 0.074229] PM: Adding info for acpi:PNP0C02:00
[ 0.074369] device: 'PNP0000:00': device_add
[ 0.074378] bus: 'acpi': add device PNP0000:00
[ 0.074388] PM: Adding info for acpi:PNP0000:00
[ 0.074506] device: 'PNP0100:00': device_add
[ 0.074513] bus: 'acpi': add device PNP0100:00
[ 0.074522] PM: Adding info for acpi:PNP0100:00
[ 0.074633] device: 'PNP0200:00': device_add
[ 0.074640] bus: 'acpi': add device PNP0200:00
[ 0.074649] PM: Adding info for acpi:PNP0200:00
[ 0.074764] device: 'PNP0800:00': device_add
[ 0.074772] bus: 'acpi': add device PNP0800:00
[ 0.074781] PM: Adding info for acpi:PNP0800:00
[ 0.074900] device: 'PNP0C04:00': device_add
[ 0.074909] bus: 'acpi': add device PNP0C04:00
[ 0.074919] PM: Adding info for acpi:PNP0C04:00
[ 0.075054] device: 'PNP0B00:00': device_add
[ 0.075062] bus: 'acpi': add device PNP0B00:00
[ 0.075071] PM: Adding info for acpi:PNP0B00:00
[ 0.075184] device: 'PNP0303:00': device_add
[ 0.075193] bus: 'acpi': add device PNP0303:00
[ 0.075202] PM: Adding info for acpi:PNP0303:00
[ 0.075319] device: 'IBM0057:00': device_add
[ 0.075326] bus: 'acpi': add device IBM0057:00
[ 0.075339] PM: Adding info for acpi:IBM0057:00
[ 0.076051] device: 'PNP0501:00': device_add
[ 0.076062] bus: 'acpi': add device PNP0501:00
[ 0.076072] PM: Adding info for acpi:PNP0501:00
[ 0.076360] device: 'PNP0400:00': device_add
[ 0.076369] bus: 'acpi': add device PNP0400:00
[ 0.076379] PM: Adding info for acpi:PNP0400:00
[ 0.076694] device: 'IBM0071:00': device_add
[ 0.076703] bus: 'acpi': add device IBM0071:00
[ 0.076712] PM: Adding info for acpi:IBM0071:00
[ 0.076866] device: 'PNP0C09:00': device_add
[ 0.076876] bus: 'acpi': add device PNP0C09:00
[ 0.076885] PM: Adding info for acpi:PNP0C09:00
[ 0.077059] device: 'LNXPOWER:00': device_add
[ 0.077066] bus: 'acpi': add device LNXPOWER:00
[ 0.077076] PM: Adding info for acpi:LNXPOWER:00
[ 0.077215] device: 'PNP0C0A:00': device_add
[ 0.077215] bus: 'acpi': add device PNP0C0A:00
[ 0.077215] PM: Adding info for acpi:PNP0C0A:00
[ 0.078074] device: 'ACPI0003:00': device_add
[ 0.078083] bus: 'acpi': add device ACPI0003:00
[ 0.078094] PM: Adding info for acpi:ACPI0003:00
[ 0.078304] device: 'IBM0068:00': device_add
[ 0.078311] bus: 'acpi': add device IBM0068:00
[ 0.078322] PM: Adding info for acpi:IBM0068:00
[ 0.078503] device: 'device:01': device_add
[ 0.078512] bus: 'acpi': add device device:01
[ 0.078521] PM: Adding info for acpi:device:01
[ 0.078660] device: 'LNXVIDEO:00': device_add
[ 0.078667] bus: 'acpi': add device LNXVIDEO:00
[ 0.078680] PM: Adding info for acpi:LNXVIDEO:00
[ 0.078796] device: 'device:02': device_add
[ 0.078804] bus: 'acpi': add device device:02
[ 0.078813] PM: Adding info for acpi:device:02
[ 0.078923] device: 'device:03': device_add
[ 0.078932] bus: 'acpi': add device device:03
[ 0.078941] PM: Adding info for acpi:device:03
[ 0.079079] device: 'device:04': device_add
[ 0.079087] bus: 'acpi': add device device:04
[ 0.079096] PM: Adding info for acpi:device:04
[ 0.079207] device: 'device:05': device_add
[ 0.079215] bus: 'acpi': add device device:05
[ 0.079224] PM: Adding info for acpi:device:05
[ 0.079358] device: 'device:06': device_add
[ 0.079366] bus: 'acpi': add device device:06
[ 0.079376] PM: Adding info for acpi:device:06
[ 0.079490] device: 'device:07': device_add
[ 0.079497] bus: 'acpi': add device device:07
[ 0.079508] PM: Adding info for acpi:device:07
[ 0.079629] device: 'device:08': device_add
[ 0.079636] bus: 'acpi': add device device:08
[ 0.079646] PM: Adding info for acpi:device:08
[ 0.080137] device: 'device:09': device_add
[ 0.080146] bus: 'acpi': add device device:09
[ 0.080157] PM: Adding info for acpi:device:09
[ 0.080310] device: 'device:0a': device_add
[ 0.080317] bus: 'acpi': add device device:0a
[ 0.080331] PM: Adding info for acpi:device:0a
[ 0.080443] device: 'device:0b': device_add
[ 0.080452] bus: 'acpi': add device device:0b
[ 0.080462] PM: Adding info for acpi:device:0b
[ 0.080582] device: 'device:0c': device_add
[ 0.080591] bus: 'acpi': add device device:0c
[ 0.080601] PM: Adding info for acpi:device:0c
[ 0.081105] device: 'device:0d': device_add
[ 0.081105] bus: 'acpi': add device device:0d
[ 0.081110] PM: Adding info for acpi:device:0d
[ 0.081228] device: 'device:0e': device_add
[ 0.081236] bus: 'acpi': add device device:0e
[ 0.081247] PM: Adding info for acpi:device:0e
[ 0.082367] device: 'device:0f': device_add
[ 0.082377] bus: 'acpi': add device device:0f
[ 0.082389] PM: Adding info for acpi:device:0f
[ 0.082621] device: 'device:10': device_add
[ 0.082631] bus: 'acpi': add device device:10
[ 0.082642] PM: Adding info for acpi:device:10
[ 0.082828] device: 'device:11': device_add
[ 0.082837] bus: 'acpi': add device device:11
[ 0.082850] PM: Adding info for acpi:device:11
[ 0.083171] device: 'LNXTHERM:00': device_add
[ 0.083180] bus: 'acpi': add device LNXTHERM:00
[ 0.083192] PM: Adding info for acpi:LNXTHERM:00
[ 0.083288] device: 'LNXTHERM:01': device_add
[ 0.083296] bus: 'acpi': add device LNXTHERM:01
[ 0.083310] PM: Adding info for acpi:LNXTHERM:01
[ 0.083444] device: 'LNXPWRBN:00': device_add
[ 0.083452] bus: 'acpi': add device LNXPWRBN:00
[ 0.083462] PM: Adding info for acpi:LNXPWRBN:00
[ 0.083532] bus: 'acpi': add driver ec
[ 0.083555] bus: 'acpi': driver_probe_device: matched device PNP0C09:00 with driver ec
[ 0.083561] bus: 'acpi': really_probe: probing driver ec with device PNP0C09:00
[ 0.083669] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.083773] driver: 'PNP0C09:00': driver_bound: bound to device 'ec'
[ 0.083778] bus: 'acpi': really_probe: bound device PNP0C09:00 to driver ec
[ 0.083858] bus: 'acpi': add driver power
[ 0.083874] bus: 'acpi': driver_probe_device: matched device LNXPOWER:00 with driver power
[ 0.083879] bus: 'acpi': really_probe: probing driver power with device LNXPOWER:00
[ 0.084113] ACPI: Power Resource [PUBS] (on)
[ 0.084208] driver: 'LNXPOWER:00': driver_bound: bound to device 'power'
[ 0.084214] bus: 'acpi': really_probe: bound device LNXPOWER:00 to driver power
[ 0.084466] Registering platform device 'dock.0'. Parent at platform
[ 0.084471] device: 'dock.0': device_add
[ 0.084480] bus: 'platform': add device dock.0
[ 0.084490] PM: Adding info for platform:dock.0
[ 0.085428] Registering platform device 'dock.1'. Parent at platform
[ 0.085428] device: 'dock.1': device_add
[ 0.085428] bus: 'platform': add device dock.1
[ 0.085428] PM: Adding info for platform:dock.1
[ 0.086763] Registering platform device 'dock.2'. Parent at platform
[ 0.086769] device: 'dock.2': device_add
[ 0.086777] bus: 'platform': add device dock.2
[ 0.086788] PM: Adding info for platform:dock.2
[ 0.087370] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.087470] bus: 'acpi': add driver pci_root
[ 0.087486] bus: 'acpi': driver_probe_device: matched device PNP0A03:00 with driver pci_root
[ 0.087492] bus: 'acpi': really_probe: probing driver pci_root with device PNP0A03:00
[ 0.087533] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.087631] device: 'pci0000:00': device_add
[ 0.087648] PM: Adding info for No Bus:pci0000:00
[ 0.087655] device: '0000:00': device_add
[ 0.087673] PM: Adding info for No Bus:0000:00
[ 0.087782] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe0000000-0xe3ffffff]
[ 0.087958] pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f]
[ 0.088055] pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f]
[ 0.088131] pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f]
[ 0.088275] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 0.088430] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
[ 0.088561] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
[ 0.088573] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
[ 0.088584] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
[ 0.088595] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
[ 0.088606] pci 0000:00:1f.1: reg 20 io port: [0x1860-0x186f]
[ 0.088618] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.088693] pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f]
[ 0.088746] pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff]
[ 0.088758] pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff]
[ 0.088826] pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff]
[ 0.088837] pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f]
[ 0.088931] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff]
[ 0.088941] pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff]
[ 0.088951] pci 0000:01:00.0: reg 18 32bit mmio: [0xd0100000-0xd010ffff]
[ 0.088974] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.089014] pci 0000:01:00.0: supports D1 D2
[ 0.089067] pci 0000:00:01.0: bridge io port: [0x3000-0x3fff]
[ 0.089074] pci 0000:00:01.0: bridge 32bit mmio: [0xd0100000-0xd01fffff]
[ 0.089081] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe8000000-0xefffffff]
[ 0.089137] pci 0000:02:00.0: reg 10 32bit mmio: [0x50000000-0x50000fff]
[ 0.089166] pci 0000:02:00.0: supports D1 D2
[ 0.089170] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.089271] pci 0000:02:00.0: PME# disabled
[ 0.089407] pci 0000:02:00.1: reg 10 32bit mmio: [0x51000000-0x51000fff]
[ 0.089436] pci 0000:02:00.1: supports D1 D2
[ 0.089440] pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.089539] pci 0000:02:00.1: PME# disabled
[ 0.089695] pci 0000:02:08.0: reg 10 32bit mmio: [0xd0200000-0xd0200fff]
[ 0.089707] pci 0000:02:08.0: reg 14 io port: [0x8000-0x803f]
[ 0.089760] pci 0000:02:08.0: supports D1 D2
[ 0.089765] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.089864] pci 0000:02:08.0: PME# disabled
[ 0.090003] pci 0000:00:1e.0: transparent bridge
[ 0.090100] pci 0000:00:1e.0: bridge io port: [0x4000-0x8fff]
[ 0.090108] pci 0000:00:1e.0: bridge 32bit mmio: [0xd0200000-0xdfffffff]
[ 0.090116] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff]
[ 0.090175] pci_bus 0000:00: on NUMA node 0
[ 0.090184] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.090262] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.090309] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.090461] device: '0000:00:00.0': device_add
[ 0.090643] bus: 'pci': add device 0000:00:00.0
[ 0.090667] PM: Adding info for pci:0000:00:00.0
[ 0.090759] device: '0000:00:01.0': device_add
[ 0.090942] bus: 'pci': add device 0000:00:01.0
[ 0.090964] PM: Adding info for pci:0000:00:01.0
[ 0.091053] device: '0000:00:1d.0': device_add
[ 0.091235] bus: 'pci': add device 0000:00:1d.0
[ 0.091265] PM: Adding info for pci:0000:00:1d.0
[ 0.091333] device: '0000:00:1d.1': device_add
[ 0.091516] bus: 'pci': add device 0000:00:1d.1
[ 0.091544] PM: Adding info for pci:0000:00:1d.1
[ 0.091611] device: '0000:00:1d.2': device_add
[ 0.091792] bus: 'pci': add device 0000:00:1d.2
[ 0.091816] PM: Adding info for pci:0000:00:1d.2
[ 0.091884] device: '0000:00:1e.0': device_add
[ 0.092086] bus: 'pci': add device 0000:00:1e.0
[ 0.092110] PM: Adding info for pci:0000:00:1e.0
[ 0.092179] device: '0000:00:1f.0': device_add
[ 0.092363] bus: 'pci': add device 0000:00:1f.0
[ 0.092388] PM: Adding info for pci:0000:00:1f.0
[ 0.092456] device: '0000:00:1f.1': device_add
[ 0.092640] bus: 'pci': add device 0000:00:1f.1
[ 0.092670] PM: Adding info for pci:0000:00:1f.1
[ 0.092739] device: '0000:00:1f.3': device_add
[ 0.092916] bus: 'pci': add device 0000:00:1f.3
[ 0.092941] PM: Adding info for pci:0000:00:1f.3
[ 0.093031] device: '0000:00:1f.5': device_add
[ 0.093213] bus: 'pci': add device 0000:00:1f.5
[ 0.093238] PM: Adding info for pci:0000:00:1f.5
[ 0.093306] device: '0000:00:1f.6': device_add
[ 0.093489] bus: 'pci': add device 0000:00:1f.6
[ 0.093516] PM: Adding info for pci:0000:00:1f.6
[ 0.093582] device: '0000:01:00.0': device_add
[ 0.093627] bus: 'pci': add device 0000:01:00.0
[ 0.093652] PM: Adding info for pci:0000:01:00.0
[ 0.093725] device: '0000:01': device_add
[ 0.093743] PM: Adding info for No Bus:0000:01
[ 0.093804] device: '0000:02:00.0': device_add
[ 0.094397] bus: 'pci': add device 0000:02:00.0
[ 0.094424] PM: Adding info for pci:0000:02:00.0
[ 0.094501] device: '0000:02:00.1': device_add
[ 0.095077] bus: 'pci': add device 0000:02:00.1
[ 0.095107] PM: Adding info for pci:0000:02:00.1
[ 0.095184] device: '0000:02:08.0': device_add
[ 0.095723] bus: 'pci': add device 0000:02:08.0
[ 0.095754] PM: Adding info for pci:0000:02:08.0
[ 0.095828] device: '0000:03': device_add
[ 0.095845] PM: Adding info for No Bus:0000:03
[ 0.095906] device: '0000:07': device_add
[ 0.095935] PM: Adding info for No Bus:0000:07
[ 0.096015] device: '0000:02': device_add
[ 0.096032] PM: Adding info for No Bus:0000:02
[ 0.096094] driver: 'PNP0A03:00': driver_bound: bound to device 'pci_root'
[ 0.096100] bus: 'acpi': really_probe: bound device PNP0A03:00 to driver pci_root
[ 0.096181] bus: 'acpi': add driver pci_link
[ 0.096194] bus: 'acpi': driver_probe_device: matched device PNP0C0F:00 with driver pci_link
[ 0.096200] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:00
[ 0.096425] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.096880] driver: 'PNP0C0F:00': driver_bound: bound to device 'pci_link'
[ 0.096887] bus: 'acpi': really_probe: bound device PNP0C0F:00 to driver pci_link
[ 0.096895] bus: 'acpi': driver_probe_device: matched device PNP0C0F:01 with driver pci_link
[ 0.096899] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:01
[ 0.097133] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.097583] driver: 'PNP0C0F:01': driver_bound: bound to device 'pci_link'
[ 0.097590] bus: 'acpi': really_probe: bound device PNP0C0F:01 to driver pci_link
[ 0.097597] bus: 'acpi': driver_probe_device: matched device PNP0C0F:02 with driver pci_link
[ 0.097602] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:02
[ 0.097795] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.098229] driver: 'PNP0C0F:02': driver_bound: bound to device 'pci_link'
[ 0.098235] bus: 'acpi': really_probe: bound device PNP0C0F:02 to driver pci_link
[ 0.098243] bus: 'acpi': driver_probe_device: matched device PNP0C0F:03 with driver pci_link
[ 0.098248] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:03
[ 0.098442] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.098888] driver: 'PNP0C0F:03': driver_bound: bound to device 'pci_link'
[ 0.098894] bus: 'acpi': really_probe: bound device PNP0C0F:03 to driver pci_link
[ 0.098902] bus: 'acpi': driver_probe_device: matched device PNP0C0F:04 with driver pci_link
[ 0.098907] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:04
[ 0.099157] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.099607] driver: 'PNP0C0F:04': driver_bound: bound to device 'pci_link'
[ 0.099613] bus: 'acpi': really_probe: bound device PNP0C0F:04 to driver pci_link
[ 0.099621] bus: 'acpi': driver_probe_device: matched device PNP0C0F:05 with driver pci_link
[ 0.099626] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:05
[ 0.099794] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.100351] driver: 'PNP0C0F:05': driver_bound: bound to device 'pci_link'
[ 0.100357] bus: 'acpi': really_probe: bound device PNP0C0F:05 to driver pci_link
[ 0.100364] bus: 'acpi': driver_probe_device: matched device PNP0C0F:06 with driver pci_link
[ 0.100369] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:06
[ 0.100536] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.101065] driver: 'PNP0C0F:06': driver_bound: bound to device 'pci_link'
[ 0.101071] bus: 'acpi': really_probe: bound device PNP0C0F:06 to driver pci_link
[ 0.101078] bus: 'acpi': driver_probe_device: matched device PNP0C0F:07 with driver pci_link
[ 0.101082] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:07
[ 0.101249] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.101806] driver: 'PNP0C0F:07': driver_bound: bound to device 'pci_link'
[ 0.101812] bus: 'acpi': really_probe: bound device PNP0C0F:07 to driver pci_link
[ 0.102036] bus: 'pnp': registered
[ 0.102050] device class 'misc': registering
[ 0.102127] device: 'vga_arbiter': device_add
[ 0.102150] PM: Adding info for No Bus:vga_arbiter
[ 0.102232] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.102391] vgaarb: loaded
[ 0.102637] device class 'scsi_host': registering
[ 0.102786] bus: 'scsi': registered
[ 0.102791] device class 'scsi_device': registering
[ 0.102862] SCSI subsystem initialized
[ 0.102956] device class 'pcmcia_socket': registering
[ 0.103097] bus: 'serio': registered
[ 0.103139] device class 'input': registering
[ 0.103210] device class 'rtc': registering
[ 0.103273] device class 'power_supply': registering
[ 0.103338] device class 'hwmon': registering
[ 0.103399] device class 'thermal': registering
[ 0.103458] device class 'leds': registering
[ 0.103579] bus: 'ac97': registered
[ 0.103584] PCI: Using ACPI for IRQ routing
[ 0.103969] device class 'net': registering
[ 0.104084] device: 'lo': device_add
[ 0.104147] PM: Adding info for No Bus:lo
[ 0.104254] Switching to clocksource tsc
[ 0.106237] pnp: PnP ACPI init
[ 0.106339] device: 'pnp0': device_add
[ 0.106362] PM: Adding info for No Bus:pnp0
[ 0.106369] ACPI: bus type pnp registered
[ 0.108364] device: '00:00': device_add
[ 0.108391] bus: 'pnp': add device 00:00
[ 0.108409] PM: Adding info for pnp:00:00
[ 0.108575] device: '00:01': device_add
[ 0.108666] bus: 'pnp': add device 00:01
[ 0.108679] PM: Adding info for pnp:00:01
[ 0.108869] device: '00:02': device_add
[ 0.108894] bus: 'pnp': add device 00:02
[ 0.108906] PM: Adding info for pnp:00:02
[ 0.109003] device: '00:03': device_add
[ 0.109027] bus: 'pnp': add device 00:03
[ 0.109040] PM: Adding info for pnp:00:03
[ 0.109125] device: '00:04': device_add
[ 0.109148] bus: 'pnp': add device 00:04
[ 0.109159] PM: Adding info for pnp:00:04
[ 0.109250] device: '00:05': device_add
[ 0.109275] bus: 'pnp': add device 00:05
[ 0.109287] PM: Adding info for pnp:00:05
[ 0.109371] device: '00:06': device_add
[ 0.109396] bus: 'pnp': add device 00:06
[ 0.109407] PM: Adding info for pnp:00:06
[ 0.109491] device: '00:07': device_add
[ 0.109517] bus: 'pnp': add device 00:07
[ 0.109529] PM: Adding info for pnp:00:07
[ 0.109612] device: '00:08': device_add
[ 0.109670] bus: 'pnp': add device 00:08
[ 0.109686] PM: Adding info for pnp:00:08
[ 0.110149] device: '00:09': device_add
[ 0.110178] bus: 'pnp': add device 00:09
[ 0.110190] PM: Adding info for pnp:00:09
[ 0.110471] device: '00:0a': device_add
[ 0.110499] bus: 'pnp': add device 00:0a
[ 0.110511] PM: Adding info for pnp:00:0a
[ 0.110875] device: '00:0b': device_add
[ 0.110907] bus: 'pnp': add device 00:0b
[ 0.110919] PM: Adding info for pnp:00:0b
[ 0.112405] pnp: PnP ACPI: found 12 devices
[ 0.112503] ACPI: ACPI bus type pnp unregistered
[ 0.112599] PnPBIOS: Disabled by ACPI PNP
[ 0.112697] bus: 'pnp': add driver system
[ 0.112712] bus: 'pnp': driver_probe_device: matched device 00:00 with driver system
[ 0.112718] bus: 'pnp': really_probe: probing driver system with device 00:00
[ 0.112735] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.112833] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
[ 0.112931] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
[ 0.113029] system 00:00: iomem range 0xc8000-0xcbfff could not be reserved
[ 0.113126] system 00:00: iomem range 0xcc000-0xcffff could not be reserved
[ 0.113224] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
[ 0.113324] system 00:00: iomem range 0xdc000-0xdffff could not be reserved
[ 0.113422] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
[ 0.113520] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
[ 0.113625] system 00:00: iomem range 0xe8000-0xebfff could not be reserved
[ 0.113725] system 00:00: iomem range 0xec000-0xeffff could not be reserved
[ 0.113824] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[ 0.113922] system 00:00: iomem range 0x100000-0x3fffffff could not be reserved
[ 0.114074] system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved
[ 0.114224] driver: '00:00': driver_bound: bound to device 'system'
[ 0.114229] bus: 'pnp': really_probe: bound device 00:00 to driver system
[ 0.114236] bus: 'pnp': driver_probe_device: matched device 00:02 with driver system
[ 0.114241] bus: 'pnp': really_probe: probing driver system with device 00:02
[ 0.114255] system 00:02: ioport range 0x1000-0x107f has been reserved
[ 0.114353] system 00:02: ioport range 0x1180-0x11bf has been reserved
[ 0.114450] system 00:02: ioport range 0x15e0-0x15ef has been reserved
[ 0.114548] system 00:02: ioport range 0x1600-0x167f has been reserved
[ 0.116086] driver: '00:02': driver_bound: bound to device 'system'
[ 0.116091] bus: 'pnp': really_probe: bound device 00:02 to driver system
[ 0.116178] device class 'mem': registering
[ 0.116249] device: 'mem': device_add
[ 0.116272] PM: Adding info for No Bus:mem
[ 0.116338] device: 'kmem': device_add
[ 0.116355] PM: Adding info for No Bus:kmem
[ 0.116416] device: 'null': device_add
[ 0.116432] PM: Adding info for No Bus:null
[ 0.116496] device: 'port': device_add
[ 0.116512] PM: Adding info for No Bus:port
[ 0.116571] device: 'zero': device_add
[ 0.116589] PM: Adding info for No Bus:zero
[ 0.116681] device: 'full': device_add
[ 0.116697] PM: Adding info for No Bus:full
[ 0.116758] device: 'random': device_add
[ 0.116774] PM: Adding info for No Bus:random
[ 0.116835] device: 'urandom': device_add
[ 0.116852] PM: Adding info for No Bus:urandom
[ 0.116915] device: 'kmsg': device_add
[ 0.116931] PM: Adding info for No Bus:kmsg
[ 0.116989] device class 'firmware': registering
[ 0.151649] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.151750] pci 0000:00:01.0: IO window: 0x3000-0x3fff
[ 0.151848] pci 0000:00:01.0: MEM window: 0xd0100000-0xd01fffff
[ 0.151947] pci 0000:00:01.0: PREFETCH window: 0xe8000000-0xefffffff
[ 0.152053] pci 0000:02:00.0: CardBus bridge, secondary bus 0000:03
[ 0.152149] pci 0000:02:00.0: IO window: 0x004000-0x0040ff
[ 0.152246] pci 0000:02:00.0: IO window: 0x004400-0x0044ff
[ 0.152344] pci 0000:02:00.0: PREFETCH window: 0xf0000000-0xf3ffffff
[ 0.152443] pci 0000:02:00.0: MEM window: 0xd4000000-0xd7ffffff
[ 0.152542] pci 0000:02:00.1: CardBus bridge, secondary bus 0000:07
[ 0.152647] pci 0000:02:00.1: IO window: 0x004800-0x0048ff
[ 0.152745] pci 0000:02:00.1: IO window: 0x004c00-0x004cff
[ 0.152842] pci 0000:02:00.1: PREFETCH window: 0xf4000000-0xf7ffffff
[ 0.152942] pci 0000:02:00.1: MEM window: 0xd8000000-0xdbffffff
[ 0.153040] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.153137] pci 0000:00:1e.0: IO window: 0x4000-0x8fff
[ 0.153235] pci 0000:00:1e.0: MEM window: 0xd0200000-0xdfffffff
[ 0.153333] pci 0000:00:1e.0: PREFETCH window: 0xf0000000-0xf7ffffff
[ 0.153450] pci 0000:00:1e.0: setting latency timer to 64
[ 0.154041] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 0.154140] PCI: setting IRQ 11 as level-triggered
[ 0.154150] pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 0.154792] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 0.154891] pci 0000:02:00.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 0.155051] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.155057] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.155064] pci_bus 0000:01: resource 0 io: [0x3000-0x3fff]
[ 0.155070] pci_bus 0000:01: resource 1 mem: [0xd0100000-0xd01fffff]
[ 0.155075] pci_bus 0000:01: resource 2 pref mem [0xe8000000-0xefffffff]
[ 0.155081] pci_bus 0000:02: resource 0 io: [0x4000-0x8fff]
[ 0.155086] pci_bus 0000:02: resource 1 mem: [0xd0200000-0xdfffffff]
[ 0.155092] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf7ffffff]
[ 0.155097] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.155102] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.155108] pci_bus 0000:03: resource 0 io: [0x4000-0x40ff]
[ 0.155113] pci_bus 0000:03: resource 1 io: [0x4400-0x44ff]
[ 0.155118] pci_bus 0000:03: resource 2 pref mem [0xf0000000-0xf3ffffff]
[ 0.155124] pci_bus 0000:03: resource 3 mem: [0xd4000000-0xd7ffffff]
[ 0.155129] pci_bus 0000:07: resource 0 io: [0x4800-0x48ff]
[ 0.155135] pci_bus 0000:07: resource 1 io: [0x4c00-0x4cff]
[ 0.155140] pci_bus 0000:07: resource 2 pref mem [0xf4000000-0xf7ffffff]
[ 0.155146] pci_bus 0000:07: resource 3 mem: [0xd8000000-0xdbffffff]
[ 0.155250] NET: Registered protocol family 2
[ 0.155520] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.156340] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.157973] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.158558] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.158682] TCP reno registered
[ 0.158984] NET: Registered protocol family 1
[ 0.159183] pci 0000:01:00.0: Boot video device
[ 0.159233] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[ 0.159493] Trying to unpack rootfs image as initramfs...
[ 0.984156] Freeing initrd memory: 14230k freed
[ 1.012094] Registering sysdev class 'i8259'
[ 1.012336] Registering sys device of class 'i8259'
[ 1.012346] Registering sys device 'i82590'
[ 1.012454] Simple Boot Flag at 0x35 set to 0x1
[ 1.012557] Registering sysdev class 'i8237'
[ 1.012619] Registering sys device of class 'i8237'
[ 1.012628] Registering sys device 'i82370'
[ 1.012696] Registering sysdev class 'machinecheck'
[ 1.012768] Registering sys device of class 'machinecheck'
[ 1.012777] Registering sys device 'machinecheck0'
[ 1.012854] device: 'mcelog': device_add
[ 1.012886] PM: Adding info for No Bus:mcelog
[ 1.012965] device class 'msr': registering
[ 1.013042] device: 'msr0': device_add
[ 1.013064] PM: Adding info for No Bus:msr0
[ 1.013129] device class 'cpuid': registering
[ 1.013194] device: 'cpu0': device_add
[ 1.013217] PM: Adding info for No Bus:cpu0
[ 1.013279] Registering sysdev class 'ioapic'
[ 1.013343] Registering platform device 'pcspkr'. Parent at platform
[ 1.013349] device: 'pcspkr': device_add
[ 1.013381] bus: 'platform': add device pcspkr
[ 1.013393] PM: Adding info for platform:pcspkr
[ 1.013460] Registering platform device 'microcode'. Parent at platform
[ 1.013466] device: 'microcode': device_add
[ 1.013473] bus: 'platform': add device microcode
[ 1.013483] PM: Adding info for platform:microcode
[ 1.013551] microcode: CPU0 sig=0xf27, pf=0x8, revision=0x26
[ 1.013653] device: 'microcode': device_add
[ 1.013669] PM: Adding info for No Bus:microcode
[ 1.013731] Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 1.014119] Registering sysdev class 'timekeeping'
[ 1.014193] Registering sys device of class 'timekeeping'
[ 1.014202] Registering sys device 'timekeeping0'
[ 1.014259] Registering sysdev class 'clocksource'
[ 1.014320] Registering sys device of class 'clocksource'
[ 1.014329] Registering sys device 'clocksource0'
[ 1.014472] device: 'snapshot': device_add
[ 1.014492] PM: Adding info for No Bus:snapshot
[ 1.014612] audit: initializing netlink socket (disabled)
[ 1.014736] type=2000 audit(1257516807.014:1): initialized
[ 1.015410] fuse init (API version 7.13)
[ 1.015529] device: 'fuse': device_add
[ 1.015552] PM: Adding info for No Bus:fuse
[ 1.015664] msgmni has been set to 1764
[ 1.016168] alg: No test for stdrng (krng)
[ 1.016298] device class 'bsg': registering
[ 1.016421] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.016575] io scheduler noop registered
[ 1.016665] io scheduler anticipatory registered
[ 1.016756] io scheduler deadline registered
[ 1.016871] io scheduler cfq registered (default)
[ 1.017034] device: 'fbcon': device_add
[ 1.017054] PM: Adding info for No Bus:fbcon
[ 1.017135] Registering sysdev class 'irqrouter'
[ 1.017197] Registering sys device of class 'irqrouter'
[ 1.017207] Registering sys device 'irqrouter0'
[ 1.017507] device: 'pnp1': device_add
[ 1.017525] PM: Adding info for No Bus:pnp1
[ 1.017529] isapnp: Scanning for PnP cards...
[ 1.373802] isapnp: No Plug & Play device found
[ 1.373924] device: 'tty': device_add
[ 1.373951] PM: Adding info for No Bus:tty
[ 1.374071] device: 'console': device_add
[ 1.374090] PM: Adding info for No Bus:console
[ 1.374145] device: 'tty0': device_add
[ 1.374161] PM: Adding info for No Bus:tty0
[ 1.374222] device class 'vc': registering
[ 1.374285] device: 'vcs': device_add
[ 1.374305] PM: Adding info for No Bus:vcs
[ 1.374364] device: 'vcsa': device_add
[ 1.374380] PM: Adding info for No Bus:vcsa
[ 1.374440] device: 'vcs1': device_add
[ 1.374457] PM: Adding info for No Bus:vcs1
[ 1.374519] device: 'vcsa1': device_add
[ 1.374537] PM: Adding info for No Bus:vcsa1
[ 1.374602] device: 'tty1': device_add
[ 1.374620] PM: Adding info for No Bus:tty1
[ 1.374681] device: 'tty2': device_add
[ 1.374698] PM: Adding info for No Bus:tty2
[ 1.374760] device: 'tty3': device_add
[ 1.374781] PM: Adding info for No Bus:tty3
[ 1.374843] device: 'tty4': device_add
[ 1.374860] PM: Adding info for No Bus:tty4
[ 1.374924] device: 'tty5': device_add
[ 1.374941] PM: Adding info for No Bus:tty5
[ 1.375023] device: 'tty6': device_add
[ 1.375042] PM: Adding info for No Bus:tty6
[ 1.375106] device: 'tty7': device_add
[ 1.375123] PM: Adding info for No Bus:tty7
[ 1.375187] device: 'tty8': device_add
[ 1.375204] PM: Adding info for No Bus:tty8
[ 1.375266] device: 'tty9': device_add
[ 1.375284] PM: Adding info for No Bus:tty9
[ 1.375344] device: 'tty10': device_add
[ 1.375362] PM: Adding info for No Bus:tty10
[ 1.375422] device: 'tty11': device_add
[ 1.375441] PM: Adding info for No Bus:tty11
[ 1.375503] device: 'tty12': device_add
[ 1.375521] PM: Adding info for No Bus:tty12
[ 1.375584] device: 'tty13': device_add
[ 1.375603] PM: Adding info for No Bus:tty13
[ 1.375667] device: 'tty14': device_add
[ 1.375691] PM: Adding info for No Bus:tty14
[ 1.375757] device: 'tty15': device_add
[ 1.375776] PM: Adding info for No Bus:tty15
[ 1.375838] device: 'tty16': device_add
[ 1.375857] PM: Adding info for No Bus:tty16
[ 1.375919] device: 'tty17': device_add
[ 1.375939] PM: Adding info for No Bus:tty17
[ 1.376059] device: 'tty18': device_add
[ 1.376082] PM: Adding info for No Bus:tty18
[ 1.376197] device: 'tty19': device_add
[ 1.376218] PM: Adding info for No Bus:tty19
[ 1.376278] device: 'tty20': device_add
[ 1.376304] PM: Adding info for No Bus:tty20
[ 1.376366] device: 'tty21': device_add
[ 1.376392] PM: Adding info for No Bus:tty21
[ 1.376453] device: 'tty22': device_add
[ 1.376475] PM: Adding info for No Bus:tty22
[ 1.376536] device: 'tty23': device_add
[ 1.376556] PM: Adding info for No Bus:tty23
[ 1.376618] device: 'tty24': device_add
[ 1.376643] PM: Adding info for No Bus:tty24
[ 1.376704] device: 'tty25': device_add
[ 1.376725] PM: Adding info for No Bus:tty25
[ 1.376785] device: 'tty26': device_add
[ 1.376806] PM: Adding info for No Bus:tty26
[ 1.376867] device: 'tty27': device_add
[ 1.376888] PM: Adding info for No Bus:tty27
[ 1.376950] device: 'tty28': device_add
[ 1.376971] PM: Adding info for No Bus:tty28
[ 1.377059] device: 'tty29': device_add
[ 1.377082] PM: Adding info for No Bus:tty29
[ 1.377145] device: 'tty30': device_add
[ 1.377166] PM: Adding info for No Bus:tty30
[ 1.377227] device: 'tty31': device_add
[ 1.377249] PM: Adding info for No Bus:tty31
[ 1.377311] device: 'tty32': device_add
[ 1.377334] PM: Adding info for No Bus:tty32
[ 1.377399] device: 'tty33': device_add
[ 1.377422] PM: Adding info for No Bus:tty33
[ 1.377488] device: 'tty34': device_add
[ 1.377510] PM: Adding info for No Bus:tty34
[ 1.377574] device: 'tty35': device_add
[ 1.377599] PM: Adding info for No Bus:tty35
[ 1.377664] device: 'tty36': device_add
[ 1.377687] PM: Adding info for No Bus:tty36
[ 1.377753] device: 'tty37': device_add
[ 1.377776] PM: Adding info for No Bus:tty37
[ 1.377839] device: 'tty38': device_add
[ 1.377863] PM: Adding info for No Bus:tty38
[ 1.377926] device: 'tty39': device_add
[ 1.377950] PM: Adding info for No Bus:tty39
[ 1.378123] device: 'tty40': device_add
[ 1.378148] PM: Adding info for No Bus:tty40
[ 1.378217] device: 'tty41': device_add
[ 1.378240] PM: Adding info for No Bus:tty41
[ 1.378302] device: 'tty42': device_add
[ 1.378326] PM: Adding info for No Bus:tty42
[ 1.378388] device: 'tty43': device_add
[ 1.378412] PM: Adding info for No Bus:tty43
[ 1.378478] device: 'tty44': device_add
[ 1.378503] PM: Adding info for No Bus:tty44
[ 1.378565] device: 'tty45': device_add
[ 1.378592] PM: Adding info for No Bus:tty45
[ 1.378655] device: 'tty46': device_add
[ 1.378679] PM: Adding info for No Bus:tty46
[ 1.378741] device: 'tty47': device_add
[ 1.378766] PM: Adding info for No Bus:tty47
[ 1.378827] device: 'tty48': device_add
[ 1.378852] PM: Adding info for No Bus:tty48
[ 1.378913] device: 'tty49': device_add
[ 1.378938] PM: Adding info for No Bus:tty49
[ 1.379000] device: 'tty50': device_add
[ 1.379049] PM: Adding info for No Bus:tty50
[ 1.379115] device: 'tty51': device_add
[ 1.379139] PM: Adding info for No Bus:tty51
[ 1.379202] device: 'tty52': device_add
[ 1.379226] PM: Adding info for No Bus:tty52
[ 1.379286] device: 'tty53': device_add
[ 1.379313] PM: Adding info for No Bus:tty53
[ 1.379375] device: 'tty54': device_add
[ 1.379401] PM: Adding info for No Bus:tty54
[ 1.379462] device: 'tty55': device_add
[ 1.379489] PM: Adding info for No Bus:tty55
[ 1.379551] device: 'tty56': device_add
[ 1.379580] PM: Adding info for No Bus:tty56
[ 1.379642] device: 'tty57': device_add
[ 1.379668] PM: Adding info for No Bus:tty57
[ 1.379730] device: 'tty58': device_add
[ 1.379756] PM: Adding info for No Bus:tty58
[ 1.379820] device: 'tty59': device_add
[ 1.379846] PM: Adding info for No Bus:tty59
[ 1.379917] device: 'tty60': device_add
[ 1.379944] PM: Adding info for No Bus:tty60
[ 1.380054] device: 'tty61': device_add
[ 1.380083] PM: Adding info for No Bus:tty61
[ 1.380150] device: 'tty62': device_add
[ 1.380177] PM: Adding info for No Bus:tty62
[ 1.380239] device: 'tty63': device_add
[ 1.380267] PM: Adding info for No Bus:tty63
[ 1.380440] device: 'ptmx': device_add
[ 1.380467] PM: Adding info for No Bus:ptmx
[ 1.380555] bus: 'virtio': add driver virtio_console
[ 1.380626] device: 'hpet': device_add
[ 1.380651] PM: Adding info for No Bus:hpet
[ 1.380730] bus: 'acpi': add driver hpet
[ 1.380843] device: 'nvram': device_add
[ 1.380866] PM: Adding info for No Bus:nvram
[ 1.380932] Non-volatile memory driver v1.3
[ 1.381085] Linux agpgart interface v0.103
[ 1.381179] bus: 'pci': add driver agpgart-intel
[ 1.381192] bus: 'pci': driver_probe_device: matched device 0000:00:00.0 with driver agpgart-intel
[ 1.381198] bus: 'pci': really_probe: probing driver agpgart-intel with device 0000:00:00.0
[ 1.381219] agpgart-intel 0000:00:00.0: Intel 845G Chipset
[ 1.385239] device: 'agpgart': device_add
[ 1.385294] PM: Adding info for No Bus:agpgart
[ 1.385456] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
[ 1.385560] driver: '0000:00:00.0': driver_bound: bound to device 'agpgart-intel'
[ 1.385567] bus: 'pci': really_probe: bound device 0000:00:00.0 to driver agpgart-intel
[ 1.385653] bus: 'platform': add driver ipmi
[ 1.385724] ipmi message handler version 39.2
[ 1.385833] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.385945] Registering platform device 'serial8250'. Parent at platform
[ 1.385950] device: 'serial8250': device_add
[ 1.385961] bus: 'platform': add device serial8250
[ 1.385973] PM: Adding info for platform:serial8250
[ 1.386177] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[ 1.386281] device: 'ttyS0': device_add
[ 1.386327] PM: Adding info for No Bus:ttyS0
[ 1.386406] device: 'ttyS1': device_add
[ 1.386433] PM: Adding info for No Bus:ttyS1
[ 1.386507] device: 'ttyS2': device_add
[ 1.386534] PM: Adding info for No Bus:ttyS2
[ 1.386607] device: 'ttyS3': device_add
[ 1.386633] PM: Adding info for No Bus:ttyS3
[ 1.386696] bus: 'platform': add driver serial8250
[ 1.386709] bus: 'platform': driver_probe_device: matched device serial8250 with driver serial8250
[ 1.386715] bus: 'platform': really_probe: probing driver serial8250 with device serial8250
[ 1.386728] driver: 'serial8250': driver_bound: bound to device 'serial8250'
[ 1.386733] bus: 'platform': really_probe: bound device serial8250 to driver serial8250
[ 1.386799] bus: 'pnp': add driver serial
[ 1.386963] bus: 'pnp': driver_probe_device: matched device 00:09 with driver serial
[ 1.386969] bus: 'pnp': really_probe: probing driver serial with device 00:09
[ 1.387040] device: 'ttyS0': device_unregister
[ 1.387045] PM: Removing info for No Bus:ttyS0
[ 1.387142] device: 'ttyS0': device_create_release
[ 1.387207] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[ 1.387307] device: 'ttyS0': device_add
[ 1.387337] PM: Adding info for No Bus:ttyS0
[ 1.387400] driver: '00:09': driver_bound: bound to device 'serial'
[ 1.387407] bus: 'pnp': really_probe: bound device 00:09 to driver serial
[ 1.387508] bus: 'pci': add driver serial
[ 1.387542] bus: 'pci': driver_probe_device: matched device 0000:00:1f.6 with driver serial
[ 1.387548] bus: 'pci': really_probe: probing driver serial with device 0000:00:1f.6
[ 1.387579] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 1.387739] serial 0000:00:1f.6: PCI INT B disabled
[ 1.387977] bus: 'isa': registered
[ 1.387983] device: 'isa': device_add
[ 1.387995] PM: Adding info for No Bus:isa
[ 1.388106] device: 'ram0': device_add
[ 1.388139] PM: Adding info for No Bus:ram0
[ 1.388244] device: '1:0': device_add
[ 1.388261] PM: Adding info for No Bus:1:0
[ 1.388337] device: 'ram1': device_add
[ 1.388365] PM: Adding info for No Bus:ram1
[ 1.388459] device: '1:1': device_add
[ 1.388476] PM: Adding info for No Bus:1:1
[ 1.388543] device: 'ram2': device_add
[ 1.388569] PM: Adding info for No Bus:ram2
[ 1.388664] device: '1:2': device_add
[ 1.388685] PM: Adding info for No Bus:1:2
[ 1.388754] device: 'ram3': device_add
[ 1.388780] PM: Adding info for No Bus:ram3
[ 1.388876] device: '1:3': device_add
[ 1.388892] PM: Adding info for No Bus:1:3
[ 1.388975] device: 'ram4': device_add
[ 1.389039] PM: Adding info for No Bus:ram4
[ 1.389140] device: '1:4': device_add
[ 1.389157] PM: Adding info for No Bus:1:4
[ 1.389225] device: 'ram5': device_add
[ 1.389251] PM: Adding info for No Bus:ram5
[ 1.389343] device: '1:5': device_add
[ 1.389361] PM: Adding info for No Bus:1:5
[ 1.389427] device: 'ram6': device_add
[ 1.389457] PM: Adding info for No Bus:ram6
[ 1.389551] device: '1:6': device_add
[ 1.389569] PM: Adding info for No Bus:1:6
[ 1.389637] device: 'ram7': device_add
[ 1.389664] PM: Adding info for No Bus:ram7
[ 1.389759] device: '1:7': device_add
[ 1.389780] PM: Adding info for No Bus:1:7
[ 1.389848] device: 'ram8': device_add
[ 1.389883] PM: Adding info for No Bus:ram8
[ 1.389977] device: '1:8': device_add
[ 1.389995] PM: Adding info for No Bus:1:8
[ 1.390113] device: 'ram9': device_add
[ 1.390141] PM: Adding info for No Bus:ram9
[ 1.390238] device: '1:9': device_add
[ 1.390254] PM: Adding info for No Bus:1:9
[ 1.390321] device: 'ram10': device_add
[ 1.390353] PM: Adding info for No Bus:ram10
[ 1.390448] device: '1:10': device_add
[ 1.390465] PM: Adding info for No Bus:1:10
[ 1.390541] device: 'ram11': device_add
[ 1.390572] PM: Adding info for No Bus:ram11
[ 1.390664] device: '1:11': device_add
[ 1.390681] PM: Adding info for No Bus:1:11
[ 1.390752] device: 'ram12': device_add
[ 1.390779] PM: Adding info for No Bus:ram12
[ 1.390874] device: '1:12': device_add
[ 1.390890] PM: Adding info for No Bus:1:12
[ 1.390962] device: 'ram13': device_add
[ 1.390988] PM: Adding info for No Bus:ram13
[ 1.391135] device: '1:13': device_add
[ 1.391154] PM: Adding info for No Bus:1:13
[ 1.391222] device: 'ram14': device_add
[ 1.391253] PM: Adding info for No Bus:ram14
[ 1.391348] device: '1:14': device_add
[ 1.391365] PM: Adding info for No Bus:1:14
[ 1.391434] device: 'ram15': device_add
[ 1.391463] PM: Adding info for No Bus:ram15
[ 1.391557] device: '1:15': device_add
[ 1.391576] PM: Adding info for No Bus:1:15
[ 1.391642] brd: module loaded
[ 1.391776] device: 'loop0': device_add
[ 1.391804] PM: Adding info for No Bus:loop0
[ 1.391904] device: '7:0': device_add
[ 1.391922] PM: Adding info for No Bus:7:0
[ 1.392054] device: 'loop1': device_add
[ 1.392083] PM: Adding info for No Bus:loop1
[ 1.392189] device: '7:1': device_add
[ 1.392206] PM: Adding info for No Bus:7:1
[ 1.392274] device: 'loop2': device_add
[ 1.392301] PM: Adding info for No Bus:loop2
[ 1.392393] device: '7:2': device_add
[ 1.392411] PM: Adding info for No Bus:7:2
[ 1.392478] device: 'loop3': device_add
[ 1.392505] PM: Adding info for No Bus:loop3
[ 1.392602] device: '7:3': device_add
[ 1.392619] PM: Adding info for No Bus:7:3
[ 1.392685] device: 'loop4': device_add
[ 1.392714] PM: Adding info for No Bus:loop4
[ 1.392809] device: '7:4': device_add
[ 1.392826] PM: Adding info for No Bus:7:4
[ 1.392894] device: 'loop5': device_add
[ 1.392924] PM: Adding info for No Bus:loop5
[ 1.393069] device: '7:5': device_add
[ 1.393088] PM: Adding info for No Bus:7:5
[ 1.393160] device: 'loop6': device_add
[ 1.393190] PM: Adding info for No Bus:loop6
[ 1.393289] device: '7:6': device_add
[ 1.393307] PM: Adding info for No Bus:7:6
[ 1.393378] device: 'loop7': device_add
[ 1.393406] PM: Adding info for No Bus:loop7
[ 1.393498] device: '7:7': device_add
[ 1.393517] PM: Adding info for No Bus:7:7
[ 1.393590] loop: module loaded
[ 1.393685] Uniform Multi-Platform E-IDE driver
[ 1.393844] bus: 'ide': registered
[ 1.393849] device class 'ide_port': registering
[ 1.393958] piix 0000:00:1f.1: IDE controller (0x8086:0x248a rev 0x02)
[ 1.394122] pci 0000:00:1f.1: enabling device (0005 -> 0007)
[ 1.394784] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 1.394883] pci 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 1.395082] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
[ 1.395185] ide0: BM-DMA at 0x1860-0x1867
[ 1.395298] ide1: BM-DMA at 0x1868-0x186f
[ 1.395408] Probing IDE interface ide0...
[ 1.659266] hda: IC25N040ATCS04-0, ATA DISK drive
[ 2.271017] device: 'ide0': device_add
[ 2.271041] PM: Adding info for No Bus:ide0
[ 2.271048] device: 'ide0': device_add
[ 2.271068] PM: Adding info for No Bus:ide0
[ 2.271167] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.271384] hda: UDMA/100 mode selected
[ 2.271692] Probing IDE interface ide1...
[ 2.790015] device: 'ide1': device_add
[ 2.790029] PM: Adding info for No Bus:ide1
[ 2.790035] device: 'ide1': device_add
[ 2.790051] PM: Adding info for No Bus:ide1
[ 2.790136] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 2.818200] ide1 at 0x170-0x177,0x376 on irq 15
[ 2.818392] device: '0.0': device_add
[ 2.818403] bus: 'ide': add device 0.0
[ 2.818421] PM: Adding info for ide:0.0
[ 2.818547] bus: 'pci': add driver PIIX_IDE
[ 2.818562] bus: 'pci': driver_probe_device: matched device 0000:00:1f.1 with driver PIIX_IDE
[ 2.818569] bus: 'pci': really_probe: probing driver PIIX_IDE with device 0000:00:1f.1
[ 2.818579] driver: '0000:00:1f.1': driver_bound: bound to device 'PIIX_IDE'
[ 2.818585] bus: 'pci': really_probe: bound device 0000:00:1f.1 to driver PIIX_IDE
[ 2.818662] ide-gd driver 1.18
[ 2.818754] bus: 'ide': add driver ide-gd
[ 2.818764] bus: 'ide': driver_probe_device: matched device 0.0 with driver ide-gd
[ 2.818770] bus: 'ide': really_probe: probing driver ide-gd with device 0.0
[ 2.818784] device: '0.0': device_add
[ 2.818796] PM: Adding info for No Bus:0.0
[ 2.818811] hda: max request size: 128KiB
[ 2.819245] hda: 78140160 sectors (40007 MB) w/1768KiB Cache, CHS=65535/16/63
[ 2.819403] hda: cache flushes not supported
[ 2.819496] device: 'hda': device_add
[ 2.819539] PM: Adding info for No Bus:hda
[ 2.819584] hda: hda1 hda2 < hda5 >
[ 2.852207] device: 'hda1': device_add
[ 2.852245] PM: Adding info for No Bus:hda1
[ 2.852257] device: 'hda2': device_add
[ 2.852283] PM: Adding info for No Bus:hda2
[ 2.852293] device: 'hda5': device_add
[ 2.852320] PM: Adding info for No Bus:hda5
[ 2.852654] device: '3:0': device_add
[ 2.852689] PM: Adding info for No Bus:3:0
[ 2.852767] driver: '0.0': driver_bound: bound to device 'ide-gd'
[ 2.852773] bus: 'ide': really_probe: bound device 0.0 to driver ide-gd
[ 2.852849] device class 'scsi_disk': registering
[ 2.852918] bus: 'scsi': add driver sd
[ 2.853038] device class 'scsi_generic': registering
[ 2.853110] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 2.853208] e100: Copyright(c) 1999-2006 Intel Corporation
[ 2.853303] bus: 'pci': add driver e100
[ 2.853324] bus: 'pci': driver_probe_device: matched device 0000:02:08.0 with driver e100
[ 2.853329] bus: 'pci': really_probe: probing driver e100 with device 0000:02:08.0
[ 2.853900] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[ 2.854000] e100 0000:02:08.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11
[ 2.879585] e100 0000:02:08.0: PME# disabled
[ 2.879693] device: 'eth0': device_add
[ 2.879768] PM: Adding info for No Bus:eth0
[ 2.880272] e100: eth0: e100_probe: addr 0xd0200000, irq 11, MAC addr 00:09:6b:02:c2:8a
[ 2.880428] driver: '0000:02:08.0': driver_bound: bound to device 'e100'
[ 2.880434] bus: 'pci': really_probe: bound device 0000:02:08.0 to driver e100
[ 2.880523] bus: 'pci': add driver yenta_cardbus
[ 2.880544] bus: 'pci': driver_probe_device: matched device 0000:02:00.0 with driver yenta_cardbus
[ 2.880550] bus: 'pci': really_probe: probing driver yenta_cardbus with device 0000:02:00.0
[ 2.880581] yenta_cardbus 0000:02:00.0: CardBus bridge found [1014:0512]
[ 2.880698] yenta_cardbus 0000:02:00.0: Using INTVAL to route CSC interrupts to PCI
[ 2.880850] yenta_cardbus 0000:02:00.0: Routing CardBus interrupts to PCI
[ 2.880951] yenta_cardbus 0000:02:00.0: TI: mfunc 0x01d21022, devctl 0x64
[ 3.104688] yenta_cardbus 0000:02:00.0: ISA IRQ mask 0x04f8, PCI irq 11
[ 3.104787] yenta_cardbus 0000:02:00.0: Socket status: 30000006
[ 3.104890] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
[ 3.105053] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x8fff: clean.
[ 3.107196] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff
[ 3.107355] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
[ 3.107636] device: 'pcmcia_socket0': device_add
[ 3.107661] PM: Adding info for No Bus:pcmcia_socket0
[ 3.107755] driver: '0000:02:00.0': driver_bound: bound to device 'yenta_cardbus'
[ 3.107762] bus: 'pci': really_probe: bound device 0000:02:00.0 to driver yenta_cardbus
[ 3.107769] bus: 'pci': driver_probe_device: matched device 0000:02:00.1 with driver yenta_cardbus
[ 3.107774] bus: 'pci': really_probe: probing driver yenta_cardbus with device 0000:02:00.1
[ 3.107798] yenta_cardbus 0000:02:00.1: CardBus bridge found [1014:0512]
[ 3.107911] yenta_cardbus 0000:02:00.1: Using INTVAL to route CSC interrupts to PCI
[ 3.108077] yenta_cardbus 0000:02:00.1: Routing CardBus interrupts to PCI
[ 3.108179] yenta_cardbus 0000:02:00.1: TI: mfunc 0x01d21022, devctl 0x64
[ 3.331686] yenta_cardbus 0000:02:00.1: ISA IRQ mask 0x04f8, PCI irq 11
[ 3.331785] yenta_cardbus 0000:02:00.1: Socket status: 30000020
[ 3.331883] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
[ 3.332046] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x4000-0x8fff: clean.
[ 3.334228] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff
[ 3.334384] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
[ 3.334649] device: 'pcmcia_socket1': device_add
[ 3.334679] PM: Adding info for No Bus:pcmcia_socket1
[ 3.334774] driver: '0000:02:00.1': driver_bound: bound to device 'yenta_cardbus'
[ 3.334781] bus: 'pci': really_probe: bound device 0000:02:00.1 to driver yenta_cardbus
[ 3.334873] bus: 'pnp': add driver i8042 kbd
[ 3.334891] bus: 'pnp': driver_probe_device: matched device 00:07 with driver i8042 kbd
[ 3.334897] bus: 'pnp': really_probe: probing driver i8042 kbd with device 00:07
[ 3.334909] driver: '00:07': driver_bound: bound to device 'i8042 kbd'
[ 3.334915] bus: 'pnp': really_probe: bound device 00:07 to driver i8042 kbd
[ 3.334979] bus: 'pnp': add driver i8042 aux
[ 3.335016] bus: 'pnp': driver_probe_device: matched device 00:08 with driver i8042 aux
[ 3.335021] bus: 'pnp': really_probe: probing driver i8042 aux with device 00:08
[ 3.335033] driver: '00:08': driver_bound: bound to device 'i8042 aux'
[ 3.335039] bus: 'pnp': really_probe: bound device 00:08 to driver i8042 aux
[ 3.335111] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 3.335293] Registering platform device 'i8042'. Parent at platform
[ 3.335298] device: 'i8042': device_add
[ 3.335310] bus: 'platform': add device i8042
[ 3.335324] PM: Adding info for platform:i8042
[ 3.335388] bus: 'platform': add driver i8042
[ 3.335402] bus: 'platform': driver_probe_device: matched device i8042 with driver i8042
[ 3.335408] bus: 'platform': really_probe: probing driver i8042 with device i8042
[ 3.340875] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.340978] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.341083] driver: 'i8042': driver_bound: bound to device 'i8042'
[ 3.341089] bus: 'platform': really_probe: bound device i8042 to driver i8042
[ 3.341114] device: 'serio0': device_add
[ 3.341123] bus: 'serio': add device serio0
[ 3.341138] PM: Adding info for serio:serio0
[ 3.341261] device: 'serio1': device_add
[ 3.341269] bus: 'serio': add device serio1
[ 3.341285] PM: Adding info for serio:serio1
[ 3.341337] device: 'mice': device_add
[ 3.341388] PM: Adding info for No Bus:mice
[ 3.341485] device: 'psaux': device_add
[ 3.341511] PM: Adding info for No Bus:psaux
[ 3.341579] mice: PS/2 mouse device common for all mice
[ 3.341683] bus: 'serio': add driver atkbd
[ 3.341769] bus: 'serio': driver_probe_device: matched device serio0 with driver atkbd
[ 3.341775] bus: 'serio': really_probe: probing driver atkbd with device serio0
[ 3.341836] bus: 'serio': add driver psmouse
[ 3.341911] Driver 'rtc_cmos' needs updating - please use bus_type methods
[ 3.342035] bus: 'pnp': add driver rtc_cmos
[ 3.342052] bus: 'pnp': driver_probe_device: matched device 00:06 with driver rtc_cmos
[ 3.342057] bus: 'pnp': really_probe: probing driver rtc_cmos with device 00:06
[ 3.342084] rtc_cmos 00:06: RTC can wake from S4
[ 3.342186] device: 'rtc0': device_add
[ 3.342226] PM: Adding info for No Bus:rtc0
[ 3.342323] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 3.342457] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 3.342554] driver: '00:06': driver_bound: bound to device 'rtc_cmos'
[ 3.342559] bus: 'pnp': really_probe: bound device 00:06 to driver rtc_cmos
[ 3.342648] bus: 'pci': add driver i801_smbus
[ 3.342666] bus: 'pci': driver_probe_device: matched device 0000:00:1f.3 with driver i801_smbus
[ 3.342672] bus: 'pci': really_probe: probing driver i801_smbus with device 0000:00:1f.3
[ 3.342697] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 3.342883] device: 'i2c-0': device_add
[ 3.342896] bus: 'i2c': add device i2c-0
[ 3.342907] PM: Adding info for i2c:i2c-0
[ 3.342989] driver: '0000:00:1f.3': driver_bound: bound to device 'i801_smbus'
[ 3.342996] bus: 'pci': really_probe: bound device 0000:00:1f.3 to driver i801_smbus
[ 3.343119] Linux video capture interface: v2.00
[ 3.343215] device class 'video4linux': registering
[ 3.343321] cpuidle: using governor ladder
[ 3.343414] cpuidle: using governor menu
[ 3.343509] device class 'sound': registering
[ 3.343611] Advanced Linux Sound Architecture Driver Version 1.0.21.
[ 3.343718] device: 'timer': device_add
[ 3.343753] PM: Adding info for No Bus:timer
[ 3.343837] bus: 'pci': add driver Intel ICH
[ 3.343854] bus: 'pci': driver_probe_device: matched device 0000:00:1f.5 with driver Intel ICH
[ 3.343860] bus: 'pci': really_probe: probing driver Intel ICH with device 0000:00:1f.5
[ 3.343892] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 3.344108] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 3.345338] device: 'input0': device_add
[ 3.345376] PM: Adding info for No Bus:input0
[ 3.345508] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 3.345674] device: 'event0': device_add
[ 3.345704] PM: Adding info for No Bus:event0
[ 3.345773] driver: 'serio0': driver_bound: bound to device 'atkbd'
[ 3.345779] bus: 'serio': really_probe: bound device serio0 to driver atkbd
[ 3.345786] bus: 'serio': driver_probe_device: matched device serio1 with driver atkbd
[ 3.345791] bus: 'serio': really_probe: probing driver atkbd with device serio1
[ 3.351177] bus: 'serio': driver_probe_device: matched device serio1 with driver psmouse
[ 3.351183] bus: 'serio': really_probe: probing driver psmouse with device serio1
[ 3.755022] intel8x0_measure_ac97_clock: measured 50072 usecs (2406 samples)
[ 3.755123] intel8x0: clocking to 48000
[ 3.755217] device: 'card0': device_add
[ 3.755240] PM: Adding info for No Bus:card0
[ 3.755347] device: 'pcmC0D1c': device_add
[ 3.755385] PM: Adding info for No Bus:pcmC0D1c
[ 3.755471] device: 'pcmC0D0p': device_add
[ 3.755496] PM: Adding info for No Bus:pcmC0D0p
[ 3.755576] device: 'pcmC0D0c': device_add
[ 3.755598] PM: Adding info for No Bus:pcmC0D0c
[ 3.755675] device: '0-0:AD1881A': device_add
[ 3.755685] bus: 'ac97': add device 0-0:AD1881A
[ 3.755695] PM: Adding info for ac97:0-0:AD1881A
[ 3.755759] device: 'controlC0': device_add
[ 3.755782] PM: Adding info for No Bus:controlC0
[ 3.755859] driver: '0000:00:1f.5': driver_bound: bound to device 'Intel ICH'
[ 3.755867] bus: 'pci': really_probe: bound device 0000:00:1f.5 to driver Intel ICH
[ 3.755957] ALSA device list:
[ 3.756066] #0: Intel 82801CA-ICH3 with AD1881A at irq 11
[ 3.756922] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.757044] arp_tables: (C) 2002 David S. Miller
[ 3.757158] TCP cubic registered
[ 3.757246] TCP westwood registered
[ 3.757412] NET: Registered protocol family 10
[ 3.758419] lo: Disabled Privacy Extensions
[ 3.759674] Mobile IPv6
[ 3.759776] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 3.759885] NET: Registered protocol family 17
[ 3.760018] Using IPI Shortcut mode
[ 3.760132] device: 'cpu_dma_latency': device_add
[ 3.760179] PM: Adding info for No Bus:cpu_dma_latency
[ 3.760315] device: 'network_latency': device_add
[ 3.760338] PM: Adding info for No Bus:network_latency
[ 3.760400] device: 'network_throughput': device_add
[ 3.760422] PM: Adding info for No Bus:network_throughput
[ 3.760729] registered taskstats version 1
[ 3.761189] rtc_cmos 00:06: setting system clock to 2009-11-06 14:13:30 UTC (1257516810)
[ 3.761418] Freeing unused kernel memory: 440k freed
[ 3.762308] Write protecting the kernel text: 3192k
[ 3.762437] Write protecting the kernel read-only data: 1152k
[ 3.878264] device: 'vcs8': device_add
[ 3.878331] PM: Adding info for No Bus:vcs8
[ 3.878464] device: 'vcsa8': device_add
[ 3.878485] PM: Adding info for No Bus:vcsa8
[ 3.958033] pcmcia_socket pcmcia_socket1: pccard: CardBus card inserted into slot 1
[ 3.958140] pci 0000:07:00.0: reg 10 32bit mmio: [0x000000-0x00ffff]
[ 3.958245] device: '0000:07:00.0': device_add
[ 3.958274] bus: 'pci': add device 0000:07:00.0
[ 3.958314] PM: Adding info for pci:0000:07:00.0
[ 4.015297] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0
[ 4.015350] serio: Synaptics pass-through port at isa0060/serio1/input0
[ 4.054681] device: 'input1': device_add
[ 4.054730] PM: Adding info for No Bus:input1
[ 4.057053] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1
[ 4.057070] device: 'mouse0': device_add
[ 4.057115] PM: Adding info for No Bus:mouse0
[ 4.060038] device: 'event1': device_add
[ 4.060064] PM: Adding info for No Bus:event1
[ 4.063481] driver: 'serio1': driver_bound: bound to device 'psmouse'
[ 4.063487] bus: 'serio': really_probe: bound device serio1 to driver psmouse
[ 4.063497] device: 'serio2': device_add
[ 4.063506] bus: 'serio': add device serio2
[ 4.063520] PM: Adding info for serio:serio2
[ 4.067033] bus: 'serio': driver_probe_device: matched device serio2 with driver psmouse
[ 4.067040] bus: 'serio': really_probe: probing driver psmouse with device serio2
[ 4.960124] bus: 'acpi': add driver fan
[ 4.973147] bus: 'acpi': add driver thermal
[ 4.973196] bus: 'acpi': driver_probe_device: matched device LNXTHERM:00 with driver thermal
[ 4.973203] bus: 'acpi': really_probe: probing driver thermal with device LNXTHERM:00
[ 4.973233] bus: 'acpi': driver_probe_device: matched device LNXTHERM:01 with driver thermal
[ 4.973239] bus: 'acpi': really_probe: probing driver thermal with device LNXTHERM:01
[ 4.973966] device: 'thermal_zone0': device_add
[ 4.973995] PM: Adding info for No Bus:thermal_zone0
[ 4.977498] device: 'hwmon0': device_add
[ 4.977515] PM: Adding info for No Bus:hwmon0
[ 4.978027] thermal LNXTHERM:01: registered as thermal_zone0
[ 4.978046] ACPI: Thermal Zone [THM0] (56 C)
[ 4.978055] driver: 'LNXTHERM:01': driver_bound: bound to device 'thermal'
[ 4.978060] bus: 'acpi': really_probe: bound device LNXTHERM:01 to driver thermal
[ 5.110412] device: 'eth0': device_rename: renaming to 'eth1'
[ 5.535507] bus: 'usb': registered
[ 5.535523] bus: 'usb': add driver usbfs
[ 5.535875] usbcore: registered new interface driver usbfs
[ 5.535889] device class 'usb_device': registering
[ 5.536135] bus: 'usb': add driver hub
[ 5.536329] usbcore: registered new interface driver hub
[ 5.545081] bus: 'usb': add driver usb
[ 5.545519] usbcore: registered new device driver usb
[ 5.580580] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.580596] bus: 'pci': add driver ehci_hcd
[ 5.606055] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.606114] bus: 'pci': add driver uhci_hcd
[ 5.606141] bus: 'pci': driver_probe_device: matched device 0000:00:1d.0 with driver uhci_hcd
[ 5.606147] bus: 'pci': really_probe: probing driver uhci_hcd with device 0000:00:1d.0
[ 5.606441] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 5.606461] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 5.606478] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5.606486] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.606538] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 5.606578] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
[ 5.606656] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.606662] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.606667] usb usb1: Product: UHCI Host Controller
[ 5.606671] usb usb1: Manufacturer: Linux 2.6.32-rc6 uhci_hcd
[ 5.606675] usb usb1: SerialNumber: 0000:00:1d.0
[ 5.606680] device: 'usb1': device_add
[ 5.606755] bus: 'usb': add device usb1
[ 5.606767] PM: Adding info for usb:usb1
[ 5.606824] bus: 'usb': driver_probe_device: matched device usb1 with driver usb
[ 5.606829] bus: 'usb': really_probe: probing driver usb with device usb1
[ 5.606842] usb usb1: configuration #1 chosen from 1 choice
[ 5.606857] device: '1-0:1.0': device_add
[ 5.606879] bus: 'usb': add device 1-0:1.0
[ 5.606889] PM: Adding info for usb:1-0:1.0
[ 5.606916] bus: 'usb': driver_probe_device: matched device 1-0:1.0 with driver hub
[ 5.606921] bus: 'usb': really_probe: probing driver hub with device 1-0:1.0
[ 5.606932] hub 1-0:1.0: USB hub found
[ 5.606952] hub 1-0:1.0: 2 ports detected
[ 5.606968] driver: '1-0:1.0': driver_bound: bound to device 'hub'
[ 5.606974] bus: 'usb': really_probe: bound device 1-0:1.0 to driver hub
[ 5.606983] device: 'ep_81': device_add
[ 5.607030] PM: Adding info for No Bus:ep_81
[ 5.607041] device: 'usbdev1.1': device_add
[ 5.607059] PM: Adding info for No Bus:usbdev1.1
[ 5.607087] driver: 'usb1': driver_bound: bound to device 'usb'
[ 5.607093] bus: 'usb': really_probe: bound device usb1 to driver usb
[ 5.607101] device: 'ep_00': device_add
[ 5.607119] PM: Adding info for No Bus:ep_00
[ 5.607135] driver: '0000:00:1d.0': driver_bound: bound to device 'uhci_hcd'
[ 5.607142] bus: 'pci': really_probe: bound device 0000:00:1d.0 to driver uhci_hcd
[ 5.607149] bus: 'pci': driver_probe_device: matched device 0000:00:1d.1 with driver uhci_hcd
[ 5.607155] bus: 'pci': really_probe: probing driver uhci_hcd with device 0000:00:1d.1
[ 5.608067] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[ 5.608582] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 5.608592] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 5.608609] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5.608616] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.608655] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 5.608697] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
[ 5.608777] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.608783] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.608788] usb usb2: Product: UHCI Host Controller
[ 5.608792] usb usb2: Manufacturer: Linux 2.6.32-rc6 uhci_hcd
[ 5.608797] usb usb2: SerialNumber: 0000:00:1d.1
[ 5.608801] device: 'usb2': device_add
[ 5.608876] bus: 'usb': add device usb2
[ 5.608889] PM: Adding info for usb:usb2
[ 5.609148] bus: 'usb': driver_probe_device: matched device usb2 with driver usb
[ 5.609155] bus: 'usb': really_probe: probing driver usb with device usb2
[ 5.609168] usb usb2: configuration #1 chosen from 1 choice
[ 5.609185] device: '2-0:1.0': device_add
[ 5.609203] bus: 'usb': add device 2-0:1.0
[ 5.609212] PM: Adding info for usb:2-0:1.0
[ 5.609299] bus: 'usb': driver_probe_device: matched device 2-0:1.0 with driver hub
[ 5.609305] bus: 'usb': really_probe: probing driver hub with device 2-0:1.0
[ 5.609316] hub 2-0:1.0: USB hub found
[ 5.609335] hub 2-0:1.0: 2 ports detected
[ 5.609351] driver: '2-0:1.0': driver_bound: bound to device 'hub'
[ 5.609357] bus: 'usb': really_probe: bound device 2-0:1.0 to driver hub
[ 5.609366] device: 'ep_81': device_add
[ 5.609385] PM: Adding info for No Bus:ep_81
[ 5.609394] device: 'usbdev2.1': device_add
[ 5.609413] PM: Adding info for No Bus:usbdev2.1
[ 5.609492] driver: 'usb2': driver_bound: bound to device 'usb'
[ 5.609498] bus: 'usb': really_probe: bound device usb2 to driver usb
[ 5.609506] device: 'ep_00': device_add
[ 5.609524] PM: Adding info for No Bus:ep_00
[ 5.609540] driver: '0000:00:1d.1': driver_bound: bound to device 'uhci_hcd'
[ 5.609547] bus: 'pci': really_probe: bound device 0000:00:1d.1 to driver uhci_hcd
[ 5.609554] bus: 'pci': driver_probe_device: matched device 0000:00:1d.2 with driver uhci_hcd
[ 5.609559] bus: 'pci': really_probe: probing driver uhci_hcd with device 0000:00:1d.2
[ 5.609586] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 5.609602] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5.609608] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.609627] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 5.609662] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
[ 5.609720] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.609726] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.609731] usb usb3: Product: UHCI Host Controller
[ 5.609735] usb usb3: Manufacturer: Linux 2.6.32-rc6 uhci_hcd
[ 5.609740] usb usb3: SerialNumber: 0000:00:1d.2
[ 5.609744] device: 'usb3': device_add
[ 5.609806] bus: 'usb': add device usb3
[ 5.609817] PM: Adding info for usb:usb3
[ 5.610371] bus: 'usb': driver_probe_device: matched device usb3 with driver usb
[ 5.610379] bus: 'usb': really_probe: probing driver usb with device usb3
[ 5.610398] usb usb3: configuration #1 chosen from 1 choice
[ 5.610419] device: '3-0:1.0': device_add
[ 5.610440] bus: 'usb': add device 3-0:1.0
[ 5.610451] PM: Adding info for usb:3-0:1.0
[ 5.610595] bus: 'usb': driver_probe_device: matched device 3-0:1.0 with driver hub
[ 5.610601] bus: 'usb': really_probe: probing driver hub with device 3-0:1.0
[ 5.610612] hub 3-0:1.0: USB hub found
[ 5.610637] hub 3-0:1.0: 2 ports detected
[ 5.610655] driver: '3-0:1.0': driver_bound: bound to device 'hub'
[ 5.610661] bus: 'usb': really_probe: bound device 3-0:1.0 to driver hub
[ 5.610673] device: 'ep_81': device_add
[ 5.610692] PM: Adding info for No Bus:ep_81
[ 5.610702] device: 'usbdev3.1': device_add
[ 5.610723] PM: Adding info for No Bus:usbdev3.1
[ 5.610810] driver: 'usb3': driver_bound: bound to device 'usb'
[ 5.610816] bus: 'usb': really_probe: bound device usb3 to driver usb
[ 5.610824] device: 'ep_00': device_add
[ 5.610845] PM: Adding info for No Bus:ep_00
[ 5.610863] driver: '0000:00:1d.2': driver_bound: bound to device 'uhci_hcd'
[ 5.610870] bus: 'pci': really_probe: bound device 0000:00:1d.2 to driver uhci_hcd
[ 9.230518] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 9.441092] device: 'input2': device_add
[ 9.441147] PM: Adding info for No Bus:input2
[ 9.441237] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input2
[ 9.441254] device: 'mouse1': device_add
[ 9.441307] PM: Adding info for No Bus:mouse1
[ 9.441332] device: 'event2': device_add
[ 9.441354] PM: Adding info for No Bus:event2
[ 9.521598] driver: 'serio2': driver_bound: bound to device 'psmouse'
[ 9.521610] bus: 'serio': really_probe: bound device serio2 to driver psmouse
[ 9.643556] PM: Starting manual resume from disk
[ 9.786376] EXT3-fs: mounted filesystem with ordered data mode.
[ 9.788622] kjournald starting. Commit interval 5 seconds
[ 13.959154] udev: starting version 146
[ 14.534839] bus: 'acpi': add driver button
[ 14.534878] bus: 'acpi': driver_probe_device: matched device PNP0C0D:00 with driver button
[ 14.534884] bus: 'acpi': really_probe: probing driver button with device PNP0C0D:00
[ 14.534917] device: 'input3': device_add
[ 14.534970] PM: Adding info for No Bus:input3
[ 14.535088] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 14.535104] device: 'event3': device_add
[ 14.535158] PM: Adding info for No Bus:event3
[ 14.535480] ACPI: Lid Switch [LID]
[ 14.535490] driver: 'PNP0C0D:00': driver_bound: bound to device 'button'
[ 14.535496] bus: 'acpi': really_probe: bound device PNP0C0D:00 to driver button
[ 14.535503] bus: 'acpi': driver_probe_device: matched device PNP0C0E:00 with driver button
[ 14.535508] bus: 'acpi': really_probe: probing driver button with device PNP0C0E:00
[ 14.535531] device: 'input4': device_add
[ 14.535569] PM: Adding info for No Bus:input4
[ 14.535640] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[ 14.535653] device: 'event4': device_add
[ 14.535684] PM: Adding info for No Bus:event4
[ 14.535707] ACPI: Sleep Button [SLPB]
[ 14.535714] driver: 'PNP0C0E:00': driver_bound: bound to device 'button'
[ 14.535719] bus: 'acpi': really_probe: bound device PNP0C0E:00 to driver button
[ 14.535757] bus: 'acpi': driver_probe_device: matched device LNXPWRBN:00 with driver button
[ 14.535762] bus: 'acpi': really_probe: probing driver button with device LNXPWRBN:00
[ 14.535780] device: 'input5': device_add
[ 14.535817] PM: Adding info for No Bus:input5
[ 14.535884] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 14.535894] device: 'event5': device_add
[ 14.535918] PM: Adding info for No Bus:event5
[ 14.535936] ACPI: Power Button [PWRF]
[ 14.535949] driver: 'LNXPWRBN:00': driver_bound: bound to device 'button'
[ 14.535954] bus: 'acpi': really_probe: bound device LNXPWRBN:00 to driver button
[ 15.204891] bus: 'acpi': add driver ac
[ 15.204934] bus: 'acpi': driver_probe_device: matched device ACPI0003:00 with driver ac
[ 15.204941] bus: 'acpi': really_probe: probing driver ac with device ACPI0003:00
[ 15.206246] device: 'AC': device_add
[ 15.206283] PM: Adding info for No Bus:AC
[ 15.206567] ACPI: AC Adapter [AC] (on-line)
[ 15.206582] driver: 'ACPI0003:00': driver_bound: bound to device 'ac'
[ 15.206588] bus: 'acpi': really_probe: bound device ACPI0003:00 to driver ac
[ 15.207124] bus: 'acpi': add driver processor
[ 15.207144] bus: 'acpi': driver_probe_device: matched device LNXCPU:00 with driver processor
[ 15.207151] bus: 'acpi': really_probe: probing driver processor with device LNXCPU:00
[ 15.207225] Marking TSC unstable due to TSC halts in idle
[ 15.208957] device: 'cooling_device0': device_add
[ 15.208981] PM: Adding info for No Bus:cooling_device0
[ 15.209342] processor LNXCPU:00: registered as cooling_device0
[ 15.209357] driver: 'LNXCPU:00': driver_bound: bound to device 'processor'
[ 15.209363] bus: 'acpi': really_probe: bound device LNXCPU:00 to driver processor
[ 15.213799] Switching to clocksource acpi_pm
[ 15.482629] device class 'video_output': registering
[ 15.483277] bus: 'acpi': add driver battery
[ 15.483318] bus: 'acpi': driver_probe_device: matched device PNP0C0A:00 with driver battery
[ 15.483324] bus: 'acpi': really_probe: probing driver battery with device PNP0C0A:00
[ 15.491471] ACPI Warning for \_SB_.PCI0.LPC_.EC__.BAT0._BIF: Converted Buffer to expected String at index 9 (20090903/nsrepair-132)
[ 15.491487] ACPI Warning for \_SB_.PCI0.LPC_.EC__.BAT0._BIF: Converted Buffer to expected String at index 10 (20090903/nsrepair-132)
[ 15.491499] ACPI Warning for \_SB_.PCI0.LPC_.EC__.BAT0._BIF: Converted Buffer to expected String at index 11 (20090903/nsrepair-132)
[ 15.491511] ACPI Warning for \_SB_.PCI0.LPC_.EC__.BAT0._BIF: Converted Buffer to expected String at index 12 (20090903/nsrepair-132)
[ 15.492549] device: 'BAT0': device_add
[ 15.492580] PM: Adding info for No Bus:BAT0
[ 15.495861] ACPI: Battery Slot [BAT0] (battery present)
[ 15.495873] driver: 'PNP0C0A:00': driver_bound: bound to device 'battery'
[ 15.495880] bus: 'acpi': really_probe: bound device PNP0C0A:00 to driver battery
[ 16.389285] NET: Registered protocol family 23
[ 16.658977] bus: 'pci': add driver Intel ICH Modem
[ 16.659048] bus: 'pci': driver_probe_device: matched device 0000:00:1f.6 with driver Intel ICH Modem
[ 16.659055] bus: 'pci': really_probe: probing driver Intel ICH Modem with device 0000:00:1f.6
[ 16.659110] Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 16.659145] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
[ 16.662382] device: 'card1': device_add
[ 16.662415] PM: Adding info for No Bus:card1
[ 16.662593] device: 'pcmC1D0p': device_add
[ 16.662650] PM: Adding info for No Bus:pcmC1D0p
[ 16.662744] device: 'pcmC1D0c': device_add
[ 16.662769] PM: Adding info for No Bus:pcmC1D0c
[ 16.662851] device: '1-1:Si3036,8': device_add
[ 16.662862] bus: 'ac97': add device 1-1:Si3036,8
[ 16.662873] PM: Adding info for ac97:1-1:Si3036,8
[ 16.662938] device: 'controlC1': device_add
[ 16.662967] PM: Adding info for No Bus:controlC1
[ 16.663088] driver: '0000:00:1f.6': driver_bound: bound to device 'Intel ICH Modem'
[ 16.663096] bus: 'pci': really_probe: bound device 0000:00:1f.6 to driver Intel ICH Modem
[ 17.218193] device class 'ieee80211': registering
[ 17.218617] Registering platform device 'regulatory.0'. Parent at platform
[ 17.218625] device: 'regulatory.0': device_add
[ 17.218643] bus: 'platform': add device regulatory.0
[ 17.218659] PM: Adding info for platform:regulatory.0
[ 17.219162] cfg80211: Using static regulatory domain info
[ 17.219171] cfg80211: Regulatory domain: US
[ 17.219176] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 17.219183] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 17.219189] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 17.219195] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 17.219201] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 17.219208] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 17.219214] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 17.219231] cfg80211: Calling CRDA for country: US
[ 17.560599] bus: 'pcmcia': registered
[ 17.698477] intel_rng: FWH not detected
[ 17.699681] bus: 'platform': add driver nsc-ircc
[ 17.700115] bus: 'pnp': add driver nsc-ircc
[ 17.700142] bus: 'pnp': driver_probe_device: matched device 00:0b with driver nsc-ircc
[ 17.700149] bus: 'pnp': really_probe: probing driver nsc-ircc with device 00:0b
[ 17.701231] nsc-ircc 00:0b: activated
[ 17.701242] driver: '00:0b': driver_bound: bound to device 'nsc-ircc'
[ 17.701249] bus: 'pnp': really_probe: bound device 00:0b to driver nsc-ircc
[ 17.702694] nsc-ircc, chip->init
[ 17.702713] nsc-ircc, Found chip at base=0x02e
[ 17.702742] nsc-ircc, driver loaded (Dag Brattli)
[ 17.702812] device: 'irda0': device_add
[ 17.702891] PM: Adding info for No Bus:irda0
[ 17.716718] IrDA: Registered device irda0
[ 17.716729] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
[ 17.716748] Registering platform device 'nsc-ircc.0'. Parent at platform
[ 17.716755] device: 'nsc-ircc.0': device_add
[ 17.716782] bus: 'platform': add device nsc-ircc.0
[ 17.716800] PM: Adding info for platform:nsc-ircc.0
[ 17.717490] bus: 'platform': driver_probe_device: matched device nsc-ircc.0 with driver nsc-ircc
[ 17.717499] bus: 'platform': really_probe: probing driver nsc-ircc with device nsc-ircc.0
[ 17.717514] driver: 'nsc-ircc.0': driver_bound: bound to device 'nsc-ircc'
[ 17.717519] bus: 'platform': really_probe: bound device nsc-ircc.0 to driver nsc-ircc
[ 17.944812] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 17.946207] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 17.946816] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 17.947343] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 17.948125] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 18.211659] bus: 'acpi': add driver video
[ 18.211705] bus: 'acpi': driver_probe_device: matched device LNXVIDEO:00 with driver video
[ 18.211712] bus: 'acpi': really_probe: probing driver video with device LNXVIDEO:00
[ 18.212066] device: 'acpi_video0': device_add
[ 18.212097] PM: Adding info for No Bus:acpi_video0
[ 18.212649] device: 'acpi_video1': device_add
[ 18.212671] PM: Adding info for No Bus:acpi_video1
[ 18.213040] device: 'acpi_video2': device_add
[ 18.213060] PM: Adding info for No Bus:acpi_video2
[ 18.213398] device: 'acpi_video3': device_add
[ 18.213421] PM: Adding info for No Bus:acpi_video3
[ 18.213882] device: 'input6': device_add
[ 18.213942] PM: Adding info for No Bus:input6
[ 18.214138] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input6
[ 18.214161] device: 'event6': device_add
[ 18.214213] PM: Adding info for No Bus:event6
[ 18.215845] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af:
[ 18.217037] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 18.217054] driver: 'LNXVIDEO:00': driver_bound: bound to device 'video'
[ 18.217061] bus: 'acpi': really_probe: bound device LNXVIDEO:00 to driver video
[ 18.232162] clean.
[ 18.232313] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 18.232889] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
[ 18.233414] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
[ 18.240294] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[ 18.697715] bus: 'pci': add driver ath5k
[ 18.697746] bus: 'pci': driver_probe_device: matched device 0000:07:00.0 with driver ath5k
[ 18.697752] bus: 'pci': really_probe: probing driver ath5k with device 0000:07:00.0
[ 18.697783] ath5k 0000:07:00.0: enabling device (0000 -> 0002)
[ 18.697806] ath5k 0000:07:00.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 18.697891] ath5k 0000:07:00.0: registered as 'phy0'
[ 18.812605] ath: EEPROM regdomain: 0x80d0
[ 18.812611] ath: EEPROM indicates we should expect a country code
[ 18.812615] ath: doing EEPROM country->regdmn map search
[ 18.812619] ath: country maps to regdmn code: 0x37
[ 18.812624] ath: Country alpha2 being used: DK
[ 18.812627] ath: Regpair used: 0x37
[ 18.812643] device: 'phy0': device_add
[ 18.812682] PM: Adding info for No Bus:phy0
[ 18.886338] phy0: Selected rate control algorithm 'minstrel'
[ 18.886370] device: 'wlan0': device_add
[ 18.886461] PM: Adding info for No Bus:wlan0
[ 18.888092] cfg80211: Calling CRDA for country: DK
[ 18.888430] ath5k phy0: Atheros AR2414 chip found (MAC: 0x79, PHY: 0x45)
[ 18.888442] driver: '0000:07:00.0': driver_bound: bound to device 'ath5k'
[ 18.888449] bus: 'pci': really_probe: bound device 0000:07:00.0 to driver ath5k
[ 18.902201] device: 'wlan0': device_rename: renaming to 'wlan1'
[ 18.903642] udev: renamed network interface wlan0 to wlan1
[ 23.129247] Adding 1646620k swap on /dev/hda5. Priority:-1 extents:1 across:1646620k
[ 23.853023] EXT3 FS on hda1, internal journal
[ 25.122370] bus: 'usb': add driver uvcvideo
[ 25.122742] usbcore: registered new interface driver uvcvideo
[ 25.122755] USB Video Class driver (v0.1.0)
[ 25.191803] device: 'mixer': device_add
[ 25.191869] PM: Adding info for No Bus:mixer
[ 25.193530] device: 'mixer1': device_add
[ 25.193597] PM: Adding info for No Bus:mixer1
[ 25.631997] device class 'drm': registering
[ 25.632459] [drm] Initialized drm 1.1.0 20060810
[ 25.772653] device: 'ttm': device_add
[ 25.772687] PM: Adding info for No Bus:ttm
[ 26.372139] [drm] radeon kernel modesetting enabled.
[ 26.372157] bus: 'pci': add driver radeon
[ 26.372206] bus: 'pci': driver_probe_device: matched device 0000:01:00.0 with driver radeon
[ 26.372213] bus: 'pci': really_probe: probing driver radeon with device 0000:01:00.0
[ 26.372331] radeon 0000:01:00.0: power state changed by ACPI to D0
[ 26.372352] radeon 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 26.376301] device: 'controlD64': device_add
[ 26.376423] PM: Adding info for No Bus:controlD64
[ 26.377618] device: 'card0': device_add
[ 26.377679] PM: Adding info for No Bus:card0
[ 26.378682] [drm] radeon: Initializing kernel modesetting.
[ 26.378725] [drm] register mmio base: 0xD0100000
[ 26.378730] [drm] register mmio size: 65536
[ 26.379083] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[ 26.379109] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[ 26.379135] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[ 26.379171] radeon 0000:01:00.0: putting AGP V2 device into 4x mode
[ 26.379208] [drm] radeon: VRAM 64M
[ 26.379212] [drm] radeon: VRAM from 0x00000000 to 0x03FFFFFF
[ 26.379216] [drm] radeon: GTT 64M
[ 26.379220] [drm] radeon: GTT from 0xE0000000 to 0xE3FFFFFF
[ 26.379256] [drm] radeon: irq initialized.
[ 26.379417] [drm] Detected VRAM RAM=64M, BAR=128M
[ 26.379426] [drm] RAM width 64bits DDR
[ 26.382247] [TTM] Zone kernel: Available graphics memory: 451816 kiB.
[ 26.382287] [drm] radeon: 16M of VRAM memory ready
[ 26.382292] [drm] radeon: 64M of GTT memory ready.
[ 26.382551] [drm] radeon: cp idle (0x00008383)
[ 26.382562] Registering platform device 'radeon_cp.0'. Parent at platform
[ 26.382568] device: 'radeon_cp.0': device_add
[ 26.382585] bus: 'platform': add device radeon_cp.0
[ 26.382601] PM: Adding info for platform:radeon_cp.0
[ 26.383173] [drm] Loading R100 Microcode
[ 26.383185] platform radeon_cp.0: firmware: requesting radeon/R100_cp.bin
[ 26.383196] device: 'radeon_cp.0': device_add
[ 26.383228] PM: Adding info for No Bus:radeon_cp.0
[ 26.449759] device: 'radeon_cp.0': device_unregister
[ 26.449767] PM: Removing info for No Bus:radeon_cp.0
[ 26.449851] PM: Removing info for platform:radeon_cp.0
[ 26.449873] bus: 'platform': remove device radeon_cp.0
[ 26.456001] [drm] radeon: ring at 0x00000000E0000000
[ 26.456066] [drm] ring test succeeded in 1 usecs
[ 26.460409] [drm] radeon: ib pool ready.
[ 26.460556] [drm] ib test succeeded in 0 usecs
[ 26.460623] device: 'i2c-1': device_add
[ 26.460653] bus: 'i2c': add device i2c-1
[ 26.460667] PM: Adding info for i2c:i2c-1
[ 26.461133] device: 'card0-VGA-1': device_add
[ 26.461158] PM: Adding info for No Bus:card0-VGA-1
[ 26.462390] [drm] DFP table revision: 2
[ 26.462412] device: 'i2c-2': device_add
[ 26.462438] bus: 'i2c': add device i2c-2
[ 26.462451] PM: Adding info for i2c:i2c-2
[ 26.462925] device: 'card0-DVI-D-1': device_add
[ 26.462948] PM: Adding info for No Bus:card0-DVI-D-1
[ 26.463140] [drm] Panel ID String: 1024x768
[ 26.463147] [drm] Panel Size 1024x768
[ 26.463160] device: 'card0-LVDS-1': device_add
[ 26.463182] PM: Adding info for No Bus:card0-LVDS-1
[ 26.463313] [drm] Default TV standard: NTSC
[ 26.463318] [drm] 27.000000000 MHz TV ref clk
[ 26.463321] [drm] No TV DAC info found in BIOS
[ 26.463332] device: 'card0-SVIDEO-1': device_add
[ 26.463348] PM: Adding info for No Bus:card0-SVIDEO-1
[ 26.463476] [drm] Radeon Display Connectors
[ 26.463482] [drm] Connector 0:
[ 26.463485] [drm] VGA
[ 26.463491] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 26.463494] [drm] Encoders:
[ 26.463498] [drm] CRT1: INTERNAL_DAC1
[ 26.463501] [drm] Connector 1:
[ 26.463504] [drm] DVI-D
[ 26.463510] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 26.463513] [drm] Encoders:
[ 26.463516] [drm] DFP1: INTERNAL_TMDS1
[ 26.463520] [drm] Connector 2:
[ 26.463523] [drm] LVDS
[ 26.463525] [drm] Encoders:
[ 26.463529] [drm] LCD1: INTERNAL_LVDS
[ 26.463532] [drm] Connector 3:
[ 26.463535] [drm] S-video
[ 26.463538] [drm] Encoders:
[ 26.463541] [drm] TV1: INTERNAL_DAC2
[ 26.530733] [drm] fb mappable at 0xE8040000
[ 26.530742] [drm] vram apper at 0xE8000000
[ 26.530746] [drm] size 3145728
[ 26.530750] [drm] fb depth is 24
[ 26.530753] [drm] pitch is 4096
[ 26.530774] device: 'fb0': device_add
[ 26.530856] PM: Adding info for No Bus:fb0
[ 26.531845] device: 'vtcon1': device_add
[ 26.531868] PM: Adding info for No Bus:vtcon1
[ 26.532497] Console: switching to colour frame buffer device 128x48
[ 26.532517] fb0: radeondrmfb frame buffer device
[ 26.532521] registered panic notifier
[ 26.532537] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
[ 26.532545] driver: '0000:01:00.0': driver_bound: bound to device 'radeon'
[ 26.532552] bus: 'pci': really_probe: bound device 0000:01:00.0 to driver radeon
[ 35.808858] device: 'vcs2': device_add
[ 35.808935] PM: Adding info for No Bus:vcs2
[ 35.808979] device: 'vcsa2': device_add
[ 35.809053] PM: Adding info for No Bus:vcsa2
[ 35.810810] device: 'vcs3': device_add
[ 35.810881] PM: Adding info for No Bus:vcs3
[ 35.810916] device: 'vcsa3': device_add
[ 35.810941] PM: Adding info for No Bus:vcsa3
[ 35.812437] device: 'vcs4': device_add
[ 35.812508] PM: Adding info for No Bus:vcs4
[ 35.812540] device: 'vcsa4': device_add
[ 35.812564] PM: Adding info for No Bus:vcsa4
[ 35.813988] device: 'vcs5': device_add
[ 35.814115] PM: Adding info for No Bus:vcs5
[ 35.814147] device: 'vcsa5': device_add
[ 35.814175] PM: Adding info for No Bus:vcsa5
[ 35.815593] device: 'vcs6': device_add
[ 35.815667] PM: Adding info for No Bus:vcs6
[ 35.815705] device: 'vcsa6': device_add
[ 35.815733] PM: Adding info for No Bus:vcsa6
[ 37.141642] [drm] LVDS-13: set mode 1024x768 17
[ 55.616797] vboxdrv: disagrees about version of symbol module_layout
[ 66.276461] Bluetooth: Core ver 2.15
[ 66.276643] device class 'bluetooth': registering
[ 66.277556] NET: Registered protocol family 31
[ 66.277669] Bluetooth: HCI device and connection manager initialized
[ 66.277807] Bluetooth: HCI socket layer initialized
[ 66.368955] Bluetooth: L2CAP ver 2.14
[ 66.369382] Bluetooth: L2CAP socket layer initialized
[ 66.496176] Bluetooth: RFCOMM TTY layer initialized
[ 66.496308] Bluetooth: RFCOMM socket layer initialized
[ 66.496423] Bluetooth: RFCOMM ver 1.11
[ 66.623883] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 66.624347] Bluetooth: BNEP filters: protocol multicast
[ 66.978098] Bridge firewalling registered
[ 66.978786] device: 'pan0': device_add
[ 66.978898] PM: Adding info for No Bus:pan0
[ 67.179808] Bluetooth: SCO (Voice Link) ver 0.6
[ 67.179929] Bluetooth: SCO socket layer initialized
[ 72.009552] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
[ 72.014715] CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load
[ 76.540506] device: 'vcs7': device_add
[ 76.540606] PM: Adding info for No Bus:vcs7
[ 76.540658] device: 'vcsa7': device_add
[ 76.540697] PM: Adding info for No Bus:vcsa7
[ 140.500876] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 141.658397] wlan1: direct probe to AP 00:1c:4a:47:1c:36 (try 1)
[ 141.659908] wlan1: deauthenticating from 00:1c:4a:47:1c:36 by local choice (reason=3)
[ 141.660000] wlan1: direct probe to AP 00:1c:4a:47:1c:36 (try 1)
[ 141.661000] wlan1: direct probe responded
[ 141.661037] wlan1: authenticate with AP 00:1c:4a:47:1c:36 (try 1)
[ 141.666015] wlan1: authenticated
[ 141.666059] wlan1: associate with AP 00:1c:4a:47:1c:36 (try 1)
[ 141.670172] wlan1: RX AssocResp from 00:1c:4a:47:1c:36 (capab=0x411 status=0 aid=3)
[ 141.670181] wlan1: associated
[ 141.672035] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 142.359321] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 151.942128] wlan1: no IPv6 routers present

Next message: Bjorn Helgaas: "Re: linux-next: Tree for November 5"
Previous message: Martin Schleier: "Re: i686 quirk for AMD Geode"
In reply to: Christian Hartmann: "drm/ksm -> s2disk -> resume -> [drm:r100_ring_test] *ERROR* radeon: ring test failed (sracth(0x15E4)=0xCAFEDEAD)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Re: drm/ksm -> s2disk -> resume -> [drm:r100_ring_test] *ERROR* radeon: ring test failed (sracth(0x15E4)=0xCAFEDEAD)

Re: drm/ksm -> s2disk -> resume -> [drm:r100_ring_test] ERROR radeon: ring test failed (sracth(0x15E4)=0xCAFEDEAD)