[PATCH 30/41] rt2800usb: fix comments in rt2800usb.h

[Bartlomiej Zolnierkiewicz]

From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
Subject: [PATCH] rt2800usb: fix comments in rt2800usb.h

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
 drivers/net/wireless/rt2x00/rt2800usb.h |   16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

Index: b/drivers/net/wireless/rt2x00/rt2800usb.h
===================================================================
--- a/drivers/net/wireless/rt2x00/rt2800usb.h
+++ b/drivers/net/wireless/rt2x00/rt2800usb.h
@@ -61,7 +61,7 @@
 
 /*
  * Signal information.
- * Defaul offset is required for RSSI <-> dBm conversion.
+ * Default offset is required for RSSI <-> dBm conversion.
  */
 #define DEFAULT_RSSI_OFFSET		120 /* FIXME */
 
@@ -87,12 +87,6 @@
  */
 
 /*
- * HOST-MCU shared memory
- */
-#define HOST_CMD_CSR			0x0404
-#define HOST_CMD_CSR_HOST_COMMAND	FIELD32(0x000000ff)
-
-/*
  * INT_SOURCE_CSR: Interrupt source register.
  * Write one to clear corresponding bit.
  * TX_FIFO_STATUS: FIFO Statistics is full, sw should read 0x171c
@@ -351,6 +345,12 @@
 #define PBF_SYS_CTRL_HOST_RAM_WRITE	FIELD32(0x00010000)
 
 /*
+ * HOST-MCU shared memory
+ */
+#define HOST_CMD_CSR			0x0404
+#define HOST_CMD_CSR_HOST_COMMAND	FIELD32(0x000000ff)
+
+/*
  * PBF registers
  * Most are for debug. Driver doesn't touch PBF register.
  */
@@ -1776,7 +1776,7 @@ struct mac_iveiv_entry {
 
 /*
  * Word3
- * WIV: Wireless Info Valid. 1: Driver filled WI,  0: DMA needs to copy WI
+ * WIV: Wireless Info Valid. 1: Driver filled WI, 0: DMA needs to copy WI
  * QSEL: Select on-chip FIFO ID for 2nd-stage output scheduler.
  *       0:MGMT, 1:HCCA 2:EDCA
  */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/