Re: 2.6.31.4: Intel P55 Chipset BUG [usbhid-raw/devices/broken?][tested 3 different UPS']

[Justin Piszcz]

On Sun, 1 Nov 2009, Justin Piszcz wrote:

> On Sun, 1 Nov 2009, Matthew Dharm wrote:
>
> > On Sun, Nov 01, 2009 at 12:11:44PM -0500, Alan Stern wrote:
> > > On Sat, 31 Oct 2009, Justin Piszcz wrote:
> > >
> > > > 1. 5 minutes of usbmon output on via chipset [working]
> > > > 2. 5 minutes of usbmon output on intel p55 usb chipset [ehci/not working]
> > >
> > > To summarize the differences between the logs, the Intel controller
> > > shows occasional instances of failed transfers like this:
> > >
> > > ffff8802138c8500 3487005687 S Ci:2:004:0 s 81 06 2100 0000 0009 9 <
> > > ffff8802138c8500 3487006051 C Ci:2:004:0 -32 0
> > >
> > > while the corresponding transfers worked with the VIA controller:
> > >
> > > ffff88020c46dd40 1774844264 S Ci:4:002:0 s 81 06 2100 0000 0009 9 <
> > > ffff88020c46dd40 1774855248 C Ci:4:002:0 0 9 = 09211001 21012237 04
> > >
> > > and indeed they worked in the other Intel logs (the failures appeared
> > > to be more or less at random).
> > >
> > > This does indeed look like a low-level hardware problem, but I'm
> > > hesitant to blame it on the chipset.  For example, the problem might
> > > lie in the hub you've got between the UPS and the computer.  I know,
> > > this doesn't explain why everything works okay with the VIA controller.
> > > Probably the only way to tell for sure what's really happening is by
> > > using an expensive bus analyzer.
> > >
> > > Have you tried bypassing that hub, and plugging the UPS directly into
> > > the computer?
>
> Hi,
>
> I do not use any hubs in this environment, everything is directly attached to 
> the motheboard.  Per Matthew (noted below) when I
> mention hub I am talking about your typical USB hub one would
> attach to a USB port on the board, not the integrated one on the
> motherboard.  Everything is directly attached from the motherboard
> to each respective device.
>
> MOBO -> UPS
> MOBO -> KBD
> MOBO -> etc
>
>
> > I think P55 chipset has an integrated hub, which is not removeable.  The
> > only USB controller is EHCI, and that is connected directly to a hub in the
> > silicon which provides multiple downstream ports and does the translation
> > to 1.0 speeds.  So the hub cannot be bypassed.
> >
> > Two things to note:
> >
> > 1) Not all ports on that silicon are the same.  Specifically, ports 1 and 9
> > have special properties (related to USB-based debugging).  You should try
> > other ports (note that I count ports starting at 0).
> I have tested every port on the motherboard (the 8 on the back and 4 off
> of the USB headers on the motherboard):
> http://home.comcast.net/~jpiszcz/20091101/ports.txt
>
> The problem occurred on every port.
>
> > 2) I noticed this article:
> > http://www.theregister.co.uk/2009/10/30/iphone_p55_problems/ -- this may
> > suggest that there are other issues with P55 chipset and USB.  According to
> > this article, as with this reported issue, adding an external USB hub
> > doesn't help, but an add-in PCI USB card does.  We may have to consider a
> > P55 issue as a possibility here.
> Very interesting-- the C-state option for the CPU is on/enabled in the
> BIOS, it has always remained on, I never disabled it.
>
> Justin.

One note to add:

There is one final port on the motherboard itself near the CPU 
but I would need to remove my motherboard and HSF/remove many cards etc
to be able to test that one.

All ports besides the one directly on the motherboard have been tested and
the error persists on them.

Justin.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/