Re: pci-express hotplug

[Alex Chiang]

* Jens Axboe <jens.axboe@xxxxxxxxxx>:
> 
> acpiphp: enable_slot - physical_slot = 1
> power_on_slot
>   no _PS0
>   no _PS0
>   no _PS0
>   no _PS0
>   no _PS0
>   no _PS0
>   no _PS0
>   no _PS0
> get_slot_status
>   reading config space dvid 0xffffffff
>   reading config space dvid 0xffffffff
>   reading config space dvid 0xffffffff
>   reading config space dvid 0xffffffff
>   reading config space dvid 0xffffffff
>   reading config space dvid 0xffffffff
>   reading config space dvid 0xffffffff
>   reading config space dvid 0xffffffff
> acpiphp_glue: acpiphp_enable_slot: Slot status is not ACPI_STA_ALL

Hm, as Kenji-san writes in an earlier email:

	The direct cause of the problem that your slot was not
	turned on is power fault. I guess acpiphp is suffering
	the same problem.  Unfortunately, it's difficult for me
	to analyze the root cause of this power fault. Please ask
	the hardware vendor about it. I hope board replacement
	will fix the problem.

In get_slot_status(), we're trying to read the card's vendor ID,
which is a mandatory PCI config space register. The fact that we
can't even read that suggests something is going wrong way
earlier before we get to this point.

Bjorn wondered on irc if your slots are physically working. Do
you know if they work under Windows? If they do, then it would be
good to find out how your bridges are being programmed, which I
believe you can discover with the Device Manager.

/ac
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/