linux-next: manual merge of the staging tree with the net/wirelesstree
From: Stephen Rothwell
Date: Tue Oct 27 2009 - 03:35:26 EST
Hi Greg,
Today's linux-next merge of the staging tree got conflicts in
drivers/net/wireless/Kconfig between commits
3d23e349d807177eaf519d444677cee86b1a04cf ("wext: refactor") and
0465af8e03bdc6cd0b49dc5548671387a8674b69 ("libertas: separate libertas'
Kconfig in it's own file") from the net/wireless tree and various commits
("... move driver to staging") from the staging tree.
I fixed it up (see below) and added a merge fixup (see further below) and
can carry these as necessary (though it may be easier for everyone (i.e.
me :-)) if these 4 staging tree commits are moved to the wireless
tree ...).
--
Cheers,
Stephen Rothwell sfr@xxxxxxxxxxxxxxxx
diff --cc drivers/net/wireless/Kconfig
index 85f8bf4,18cadf0..0000000
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@@ -5,132 -5,20 +5,23 @@@
menuconfig WLAN
bool "Wireless LAN"
depends on !S390
+ select WIRELESS
default y
---help---
- This section contains all the pre 802.11 and 802.11 wireless
- device drivers. For a complete list of drivers and documentation
+ This section contains all the 802.11 wireless LAN device
+ drivers. For a complete list of drivers and documentation
on them refer to the wireless wiki:
http://wireless.kernel.org/en/users/Drivers
if WLAN
- menuconfig WLAN_PRE80211
- bool "Wireless LAN (pre-802.11)"
- depends on NETDEVICES
- ---help---
- Say Y if you have any pre-802.11 wireless LAN hardware.
-
- This option does not affect the kernel build, it only
- lets you choose drivers.
-
- config STRIP
- tristate "STRIP (Metricom starmode radio IP)"
- depends on INET && WLAN_PRE80211
- select WIRELESS_EXT
- ---help---
- Say Y if you have a Metricom radio and intend to use Starmode Radio
- IP. STRIP is a radio protocol developed for the MosquitoNet project
- to send Internet traffic using Metricom radios. Metricom radios are
- small, battery powered, 100kbit/sec packet radio transceivers, about
- the size and weight of a cellular telephone. (You may also have heard
- them called "Metricom modems" but we avoid the term "modem" because
- it misleads many people into thinking that you can plug a Metricom
- modem into a phone line and use it as a modem.)
-
- You can use STRIP on any Linux machine with a serial port, although
- it is obviously most useful for people with laptop computers. If you
- think you might get a Metricom radio in the future, there is no harm
- in saying Y to STRIP now, except that it makes the kernel a bit
- bigger.
-
- To compile this as a module, choose M here: the module will be
- called strip.
-
- config ARLAN
- tristate "Aironet Arlan 655 & IC2200 DS support"
- depends on ISA && !64BIT && WLAN_PRE80211
- select WIRELESS_EXT
- ---help---
- Aironet makes Arlan, a class of wireless LAN adapters. These use the
- www.Telxon.com chip, which is also used on several similar cards.
- This driver is tested on the 655 and IC2200 series cards. Look at
- <http://www.ylenurme.ee/~elmer/655/> for the latest information.
-
- The driver is built as two modules, arlan and arlan-proc. The latter
- is the /proc interface and is not needed most of time.
-
- On some computers the card ends up in non-valid state after some
- time. Use a ping-reset script to clear it.
-
- config WAVELAN
- tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support"
- depends on ISA && WLAN_PRE80211
- select WIRELESS_EXT
- select WEXT_SPY
- select WEXT_PRIV
- ---help---
- The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is
- a Radio LAN (wireless Ethernet-like Local Area Network) using the
- radio frequencies 900 MHz and 2.4 GHz.
-
- If you want to use an ISA WaveLAN card under Linux, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>. Some more specific
- information is contained in
- <file:Documentation/networking/wavelan.txt> and in the source code
- <file:drivers/net/wireless/wavelan.p.h>.
-
- You will also need the wireless tools package available from
- <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
- Please read the man pages contained therein.
-
- To compile this driver as a module, choose M here: the module will be
- called wavelan.
-
- config PCMCIA_WAVELAN
- tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support"
- depends on PCMCIA && WLAN_PRE80211
- select WIRELESS_EXT
- select WEXT_SPY
- select WEXT_PRIV
- help
- Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA
- (PC-card) wireless Ethernet networking card to your computer. This
- driver is for the non-IEEE-802.11 Wavelan cards.
-
- To compile this driver as a module, choose M here: the module will be
- called wavelan_cs. If unsure, say N.
-
- config PCMCIA_NETWAVE
- tristate "Xircom Netwave AirSurfer Pcmcia wireless support"
- depends on PCMCIA && WLAN_PRE80211
- select WIRELESS_EXT
- select WEXT_PRIV
- help
- Say Y here if you intend to attach this type of PCMCIA (PC-card)
- wireless Ethernet networking card to your computer.
-
- To compile this driver as a module, choose M here: the module will be
- called netwave_cs. If unsure, say N.
-
-
- menuconfig WLAN_80211
- bool "Wireless LAN (IEEE 802.11)"
- depends on NETDEVICES
- ---help---
- Say Y if you have any 802.11 wireless LAN hardware.
-
- This option does not affect the kernel build, it only
- lets you choose drivers.
-
config PCMCIA_RAYCS
tristate "Aviator/Raytheon 2.4GHz wireless support"
- depends on PCMCIA && WLAN_80211
+ depends on PCMCIA
select WIRELESS_EXT
+ select WEXT_SPY
+ select WEXT_PRIV
---help---
Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
(PC-card) wireless Ethernet networking card to your computer.
@@@ -140,9 -28,48 +31,9 @@@
To compile this driver as a module, choose M here: the module will be
called ray_cs. If unsure, say N.
-config LIBERTAS
- tristate "Marvell 8xxx Libertas WLAN driver support"
- select WIRELESS_EXT
- select LIB80211
- select FW_LOADER
- ---help---
- A library for Marvell Libertas 8xxx devices.
-
-config LIBERTAS_USB
- tristate "Marvell Libertas 8388 USB 802.11b/g cards"
- depends on LIBERTAS && USB
- ---help---
- A driver for Marvell Libertas 8388 USB devices.
-
-config LIBERTAS_CS
- tristate "Marvell Libertas 8385 CompactFlash 802.11b/g cards"
- depends on LIBERTAS && PCMCIA
- select FW_LOADER
- ---help---
- A driver for Marvell Libertas 8385 CompactFlash devices.
-
-config LIBERTAS_SDIO
- tristate "Marvell Libertas 8385/8686/8688 SDIO 802.11b/g cards"
- depends on LIBERTAS && MMC
- ---help---
- A driver for Marvell Libertas 8385/8686/8688 SDIO devices.
-
-config LIBERTAS_SPI
- tristate "Marvell Libertas 8686 SPI 802.11b/g cards"
- depends on LIBERTAS && SPI
- ---help---
- A driver for Marvell Libertas 8686 SPI devices.
-
-config LIBERTAS_DEBUG
- bool "Enable full debugging output in the Libertas module."
- depends on LIBERTAS
- ---help---
- Debugging support.
-
config LIBERTAS_THINFIRM
tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware"
- depends on WLAN_80211 && MAC80211
+ depends on MAC80211
select FW_LOADER
---help---
A library for Marvell Libertas 8xxx devices using thinfirm.
@@@ -155,11 -82,9 +46,11 @@@ config LIBERTAS_THINFIRM_US
config AIRO
tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
- depends on ISA_DMA_API && WLAN_80211 && (PCI || BROKEN)
+ depends on ISA_DMA_API && (PCI || BROKEN)
select WIRELESS_EXT
select CRYPTO
+ select WEXT_SPY
+ select WEXT_PRIV
---help---
This is the standard Linux driver to support Cisco/Aironet ISA and
PCI 802.11 wireless cards.
@@@ -175,9 -100,8 +66,9 @@@
config ATMEL
tristate "Atmel at76c50x chipset 802.11b support"
- depends on (PCI || PCMCIA) && WLAN_80211
+ depends on (PCI || PCMCIA)
select WIRELESS_EXT
+ select WEXT_PRIV
select FW_LOADER
select CRC32
---help---
@@@ -237,21 -161,18 +128,21 @@@ config AIRO_C
Cisco Linux utilities can be used to configure the card.
config PCMCIA_WL3501
- tristate "Planet WL3501 PCMCIA cards"
- depends on EXPERIMENTAL && PCMCIA
- select WIRELESS_EXT
- ---help---
- A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
- It has basic support for Linux wireless extensions and initial
- micro support for ethtool.
+ tristate "Planet WL3501 PCMCIA cards"
- depends on EXPERIMENTAL && PCMCIA && WLAN_80211
++ depends on EXPERIMENTAL && PCMCIA
+ select WIRELESS_EXT
+ select WEXT_SPY
+ help
+ A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
+ It has basic support for Linux wireless extensions and initial
+ micro support for ethtool.
config PRISM54
tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)'
- depends on PCI && EXPERIMENTAL && WLAN_80211
+ depends on PCI && EXPERIMENTAL
select WIRELESS_EXT
+ select WEXT_SPY
+ select WEXT_PRIV
select FW_LOADER
---help---
This enables support for FullMAC PCI/Cardbus prism54 devices. This
@@@ -272,9 -193,8 +163,9 @@@
config USB_ZD1201
tristate "USB ZD1201 based Wireless device support"
- depends on USB && WLAN_80211
+ depends on USB
select WIRELESS_EXT
+ select WEXT_PRIV
select FW_LOADER
---help---
Say Y if you want to use wireless LAN adapters based on the ZyDAS
-------------------------------------------------------
From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
Date: Tue, 27 Oct 2009 18:29:04 +1100
Subject: [PATCH] staging: merge fixup for wireless drivers move
Signed-off-by: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
---
drivers/net/wireless/libertas/Kconfig | 2 +-
drivers/staging/netwave/Kconfig | 1 +
drivers/staging/wavelan/Kconfig | 4 ++++
3 files changed, 6 insertions(+), 1 deletions(-)
diff --git a/drivers/net/wireless/libertas/Kconfig b/drivers/net/wireless/libertas/Kconfig
index 8f8d75b..30aa9d4 100644
--- a/drivers/net/wireless/libertas/Kconfig
+++ b/drivers/net/wireless/libertas/Kconfig
@@ -1,6 +1,6 @@
config LIBERTAS
tristate "Marvell 8xxx Libertas WLAN driver support"
- depends on WLAN_80211 && CFG80211
+ depends on CFG80211
select WIRELESS_EXT
select WEXT_SPY
select LIB80211
diff --git a/drivers/staging/netwave/Kconfig b/drivers/staging/netwave/Kconfig
index b6f0f0a..c0c996c 100644
--- a/drivers/staging/netwave/Kconfig
+++ b/drivers/staging/netwave/Kconfig
@@ -2,6 +2,7 @@ config PCMCIA_NETWAVE
tristate "Xircom Netwave AirSurfer Pcmcia wireless support"
depends on PCMCIA
select WIRELESS_EXT
+ select WEXT_PRIV
help
Say Y here if you intend to attach this type of PCMCIA (PC-card)
wireless Ethernet networking card to your computer.
diff --git a/drivers/staging/wavelan/Kconfig b/drivers/staging/wavelan/Kconfig
index ff349cd..786060e 100644
--- a/drivers/staging/wavelan/Kconfig
+++ b/drivers/staging/wavelan/Kconfig
@@ -2,6 +2,8 @@ config WAVELAN
tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support"
depends on ISA
select WIRELESS_EXT
+ select WEXT_SPY
+ select WEXT_PRIV
---help---
The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is
a Radio LAN (wireless Ethernet-like Local Area Network) using the
@@ -25,6 +27,8 @@ config PCMCIA_WAVELAN
tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support"
depends on PCMCIA
select WIRELESS_EXT
+ select WEXT_SPY
+ select WEXT_PRIV
help
Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA
(PC-card) wireless Ethernet networking card to your computer. This
--
1.6.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/