[PATCH 4/6] thermal: add sanity check for the passive attribute

From: Frans Pop
Date: Mon Oct 26 2009 - 03:39:23 EST


Values below 1000 milli-celsius don't make sense and can cause the
system to go into a thermal heart attack: the actual temperature
will always be lower and thus the system will be throttled down to
its lowest setting.

An additional problem is that values below 1000 will show as 0 in
/proc/acpi/thermal/TZx/trip_points:passive.

cat passive
0
echo -n 90 >passive
bash: echo: write error: Invalid argument
echo -n 90000 >passive
cat passive
90000

Signed-off-by: Frans Pop <elendil@xxxxxxxxx>
Cc: Matthew Garrett <mjg@xxxxxxxxxx>
Cc: Zhang Rui <rui.zhang@xxxxxxxxx>
---
Documentation/thermal/sysfs-api.txt | 1 +
drivers/thermal/thermal_sys.c | 6 ++++++
2 files changed, 7 insertions(+), 0 deletions(-)

diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt
index a87dc27..cb3d15b 100644
--- a/Documentation/thermal/sysfs-api.txt
+++ b/Documentation/thermal/sysfs-api.txt
@@ -206,6 +206,7 @@ passive
passive trip point for the zone. Activation is done by polling with
an interval of 1 second.
Unit: millidegrees Celsius
+ Valid values: 0 (disabled) or greater than 1000
RW, Optional

*****************************
diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c
index 4e83c29..74d2eb5 100644
--- a/drivers/thermal/thermal_sys.c
+++ b/drivers/thermal/thermal_sys.c
@@ -225,6 +225,12 @@ passive_store(struct device *dev, struct device_attribute *attr,
if (!sscanf(buf, "%d\n", &state))
return -EINVAL;

+ /* sanity check: values below 1000 millicelcius don't make sense
+ * and can cause the system to go into a thermal heart attack
+ */
+ if (state && state < 1000)
+ return -EINVAL;
+
if (state && !tz->forced_passive) {
mutex_lock(&thermal_list_lock);
list_for_each_entry(cdev, &thermal_cdev_list, node) {
--
1.5.6.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/