Ext3 sequential read performance drop 2.6.29 -> 2.6.30,2.6.31,...

[Laurent CORBES]

Hi all,

While benchmarking some systems I discover a big sequential read performance
drop using ext3 on ~ big files. The drop seems to be introduced in 2.6.30. I'm
testing with 2.6.28.6 -> 2.6.29.6 -> 2.6.30.4 -> 2.6.31.3.

I'm running a software raid6 (chunk 256k) on 6 750Go 7200rpm disks. here are
the raw datas of disks and raid device:

$ dd if=/dev/sda of=/dev/null bs=1M count=10240
10240+0 records in
10240+0 records out
10737418240 bytes (11 GB) copied, 98.7483 seconds, 109 MB/s

$ dd if=/dev/md7 of=/dev/null bs=1M count=10240
10240+0 records in
10240+0 records out
10737418240 bytes (11 GB) copied, 34.8744 seconds, 308 MB/s

Over the different kernels changes here are not important (~1MB on the raw disk
and ~5MB on the raid device). The write of a 10GB file over the fs here is also
almost constant at ~100MB/s.

$ dd if=/dev/zero of=/mnt/space/benchtmp//dd.out bs=1M count=10240
10240+0 records in
10240+0 records out
10737418240 bytes (11 GB) copied, 102.547 seconds, 105 MB/s

However while reading this file there is a huge perf drop between 2.6.29.6 and
2.6.30.4 and 2.6.31.3:

2.6.28.6:
sj-dev-7:/mnt/space/Benchmark# dd if=dd.out of=/dev/null bs=1M
10240+0 records in
10240+0 records out
10737418240 bytes (11 GB) copied, 43.8288 seconds, 245 MB/s

2.6.29.6:
sj-dev-7:/mnt/space/Benchmark# dd if=dd.out of=/dev/null bs=1M
10240+0 records in
10240+0 records out
10737418240 bytes (11 GB) copied, 42.745 seconds, 251 MB/s

2.6.30.4:
$ dd if=/mnt/space/benchtmp//dd.out of=/dev/null bs=1M
10240+0 records in
10240+0 records out
10737418240 bytes (11 GB) copied, 48.621 seconds, 221 MB/s

2.6.31.3:
sj-dev-7:/mnt/space/Benchmark# dd if=dd.out of=/dev/null bs=1M
10240+0 records in
10240+0 records out
10737418240 bytes (11 GB) copied, 51.4148 seconds, 209 MB/s

... Things going worst over time ...

Numbers are average over ~10 runs each.

I first check for stripe/stride aligment of the ext3 fs that is quite important
in raid6. I recheck it and everything seems fine from my understandings and
formula:
raid6 chunk 256k -> stride = 64. 4 data disks -> stripe-width = 256 ?

In both case I'm using cfq IO scheduler and no special tuning is done with it.


For informations the test server is a Dell PowerEdge R710 with SAS 6iR, 4GB
ram and 6*750GB sata disks. I got the same behavior on PE2950 Perc6i, 2GB
ram and 6*750GB sata disks. 

Here are misc informations about the setup:
sj-dev-7:/mnt/space/Benchmark# cat /proc/mdstat 
md7 : active raid6 sdf7[5] sde7[4] sdd7[3] sdc7[2] sdb7[1] sda7[0]
      2923443200 blocks level 6, 256k chunk, algorithm 2 [6/6] [UUUUUU]
      bitmap: 0/175 pages [0KB], 2048KB chunk

sj-dev-7:/mnt/space/Benchmark# dumpe2fs -h /dev/md7
dumpe2fs 1.40-WIP (14-Nov-2006)
Filesystem volume name:   <none>
Last mounted on:          <not available>
Filesystem UUID:          9c29f236-e4f2-4db4-bf48-ea613cd0ebad
Filesystem magic number:  0xEF53
Filesystem revision #:    1 (dynamic)
Filesystem features:      has_journal resize_inode dir_index filetype
needs_recovery sparse_super large_file Filesystem flags:         signed
directory hash Default mount options:    (none)
Filesystem state:         clean
Errors behavior:          Continue
Filesystem OS type:       Linux
Inode count:              713760
Block count:              730860800
Reserved block count:     0
Free blocks:              705211695
Free inodes:              713655
First block:              0
Block size:               4096
Fragment size:            4096
Reserved GDT blocks:      849
Blocks per group:         32768
Fragments per group:      32768
Inodes per group:         32
Inode blocks per group:   1
Filesystem created:       Thu Oct  1 15:45:01 2009
Last mount time:          Mon Oct 12 13:17:45 2009
Last write time:          Mon Oct 12 13:17:45 2009
Mount count:              10
Maximum mount count:      30
Last checked:             Thu Oct  1 15:45:01 2009
Check interval:           15552000 (6 months)
Next check after:         Tue Mar 30 15:45:01 2010
Reserved blocks uid:      0 (user root)
Reserved blocks gid:      0 (group root)
First inode:              11
Inode size:               128
Journal inode:            8
Default directory hash:   tea
Directory Hash Seed:      378d4fd2-23c9-487c-b635-5601585f0da7
Journal backup:           inode blocks
Journal size:             128M


Thanks all.

-- 
Laurent Corbes - laurent.corbes@xxxxxxxxxxxx
SmartJog SAS | Phone: +33 1 5868 6225 | Fax: +33 1 5868 6255 | www.smartjog.com
27 Blvd Hippolyte Marquès, 94200 Ivry-sur-Seine, France
A TDF Group company
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/