Re: [RFC PATCH 19/19] Target_Core_Mod Makefile/Kconfig and div64.c

[Nicholas A. Bellinger]

On Sun, 2009-09-13 at 12:51 +0300, Boaz Harrosh wrote:
> On 09/12/2009 04:58 AM, Nicholas A. Bellinger wrote:
> > [RFC PATCH 19/19] Target_Core_Mod Makefile/Kconfig and div64.c
> > 
> > This patch adds the remaining misc Makefile and Kconfig changes
> > 
> > It also has wrappers for unsigned long division in div64c, that will be converted to
> > include/asm-generic/div64.h
> > 
> > Signed-off-by: Nicholas A. Bellinger <nab@xxxxxxxxxxxxxxx>
> > diff --git a/drivers/target/div64.c b/drivers/target/div64.c
> > new file mode 100644
> > index 0000000..6d59864
> > --- /dev/null
> > +++ b/drivers/target/div64.c
> > @@ -0,0 +1,16 @@
> > +#include <asm/types.h>
> > +#include <asm/div64.h>
> > +
> > +#if BITS_PER_LONG == 32
> > +
> > +u64 __udivdi3(u64 a, u64 b)
> > +{
> > +  do_div(a, b);
> > +  return a;
> > +}
> > +
> > +u64 __umoddi3(u64 a, u64 b)
> > +{
> > +  return do_div(a, b);
> > +}
> > +#endif
> > diff --git a/drivers/target/Makefile b/drivers/target/Makefile
> 
> I like Kbuild better then Makefile. And so does the Kernel documentation.
> It says new code should use Kbuild
> 
> > new file mode 100644
> > index 0000000..3e413b0
> > --- /dev/null
> > +++ b/drivers/target/Makefile
> > @@ -0,0 +1,96 @@
> > +CWD=$(shell pwd)
> > +
> > +PYX_ISCSI_VENDOR ?="Linux-iSCSI.org"
> > +
> > +# Transport Plugins and Devices.
> > + #
> > +LINUX_PARALLEL_SCSI ?= 1
> > +LINUX_STGT ?= 1
> > +LINUX_SCSI_MEDIA_ROM ?= 1
> > +LINUX_PARALLEL_ATA ?= 0
> > +LINUX_IBLOCK ?= 1
> > +LINUX_RAMDISK ?= 1
> > +LINUX_FILEIO ?= 1
> > +
> > +LINUX_VPD_PAGE_CHECK?=1
> > +LIO_TARGET_CONFIGFS?=1
> > +
> > +MODVER ?= 1
> > +USEGDB ?= 1
> > +DEBUG_DEV ?= 0
> > +SNMP_FEATURE ?= 1
> > +
> 
> Now when in-Kernel don't you need to use Kconfig for all this "configuration".
> 
> What's with the re-invent the wheel, here.


Ok, I will move all of these config items into Kbuild

> 
> > +obj-$(CONFIG_TARGET_CORE)		+=	target_core_mod.o
> > +target_core_mod-objs			:=	target_core_configfs.o \
> > +						target_core_device.o \
> > +						target_core_hba.o \
> > +						target_core_plugin.o \
> > +						target_core_pr.o \
> > +						target_core_alua.o \
> > +						target_core_scdb.o \
> > +						target_core_seobj.o \
> > +						target_core_tmr.o \
> > +						target_core_tpg.o \
> > +						target_core_transport.o \
> > +						target_core_ua.o \
> > +						div64.o
> > +
> > +ifeq ($(LINUX_IBLOCK), 1)
> > +target_core_mod-objs			+=	target_core_iblock.o
> > +EXTRA_CFLAGS				+=	-DPYX_IBLOCK
> > +endif
> > +ifeq ($(LINUX_PARALLEL_SCSI), 1)
> > +target_core_mod-objs			+=	target_core_pscsi.o
> > +EXTRA_CFLAGS				+=	-DPARALLEL_SCSI
> > +endif
> > +ifeq ($(LINUX_STGT), 1)
> > +target_core_mod-objs			+=	target_core_stgt.o
> > +EXTRA_CFLAGS				+=	-DSTGT_PLUGIN
> > +endif
> > +ifeq ($(LINUX_RAMDISK), 1)
> > +target_core_mod-objs			+=	target_core_rd.o
> > +EXTRA_CFLAGS				+=	-DPYX_RAMDISK
> > +endif
> > +ifeq ($(LINUX_FILEIO), 1)
> > +target_core_mod-objs			+=	target_core_file.o
> > +EXTRA_CFLAGS				+=	-DPYX_FILEIO
> > +endif
> > +ifeq ($(SNMP_FEATURE), 1)
> > +target_core_mod-objs			+=	target_core_mib.o
> > +EXTRA_CFLAGS				+=	-DSNMP_SUPPORT
> > +endif
> > +ifeq ($(LINUX_VPD_PAGE_CHECK), 1)
> > +EXTRA_CFLAGS += -DLINUX_VPD_PAGE_CHECK
> > +endif
> > +ifeq ($(LINUX_SCSI_MEDIA_ROM), 1)
> > +EXTRA_CFLAGS += -DLINUX_SCSI_MEDIA_ROM
> > +endif
> > +ifeq ($(DEBUG_DEV), 1)
> > +EXTRA_CFLAGS += -DDEBUG_DEV
> > +endif
> > +
> 
> You see what I mean. Try with Kconfig variables all this disappears.

Understood.

> 
> > +
> > +EXTRA_CFLAGS+=-I$(CWD)/drivers/target/ -I$(CWD)/drivers/scsi/
> > +EXTRA_CFLAGS+=-D_TARGET -DLINUX -DLINUX_KERNEL_26 -DLINUX_SCSI_HOST_LOCK -DLINUX_USE_SIGHAND
> 
> ?? are you sure
> 
> > +EXTRA_CFLAGS+=-DLINUX_SCATTERLIST_HAS_PAGE -DPYX_ISCSI_VENDOR='"Linux-iSCSI.org"'
> 
> And these are for ??
> 

Ok, these are some legacy items that I missed, and can be safely
removed..

> <Makefile>
> > +
> > +all:
> > +	$(MAKE) -C $(KERNEL_DIR) SUBDIRS=$(CWD) modules CWD=$(CWD) ARCH=$(ARCH) KBUILD_VERBOSE=0
> > +
> > +install ins:
> > +	rm -f /lib/modules/`uname -r`/kernel/drivers/scsi/iscsi_target_mod.ko
> > +	rm -f /lib/modules/`uname -r`/kernel/drivers/iscsi/iscsi_target_mod.ko
> > +	mkdir -p /lib/modules/`uname -r`/kernel/drivers/iscsi
> > +	cp -f iscsi_target_mod.ko /lib/modules/`uname -r`/kernel/drivers/iscsi
> > +	cp -f target_core_mod.ko /lib/modules/`uname -r`/kernel/drivers/iscsi
> > +	depmod -ae
> > +
> > +
> > +
> > +clean:
> > +	rm -f $(foreach prog,$(target_core_mod-objs) $(obj-m),$(CWD)/$(prog)) $(CWD)/target_core_mod.mod.o
> > +	rm -f target_core_mod.ko target_core_mod.mod.c
> > +	rm -f .*.cmd ../common/.*.cmd .make_autoconfig *~
> > +	rm -fr .tmp_versions
> > +
> </Makefile>
> 
> OK this should go in a Makefile and kept out-of-tree

Ok, Got it

> 
> > +
> > diff --git a/drivers/target/Kconfig b/drivers/target/Kconfig
> > new file mode 100644
> > index 0000000..04564f1
> > --- /dev/null
> > +++ b/drivers/target/Kconfig
> > @@ -0,0 +1,7 @@
> > +config TARGET_CORE
> > +        tristate "Generic Target Core Engine and ConfigFS Infrastructure"
> > +	select CONFIGFS_FS
> > +	select SCSI_TGT
> > +        default m
> > +        ---help---
> > +        Say Y here to enable the Storage Engine, Subsystem Plugins, and ConfigFS enabled control path for the Generic Target Engine.
> > 
> > 
> 
> Lots of more configs missing here
> 

Thanks for your comments Boaz!

--nab

> Cheers
> Boaz


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/