Re: MD/RAID time out writing superblock

[Tejun Heo]

Hello,

Thomas Fjellstrom wrote:
> I have the same issue with a single WD 2TB Green drive. Technically two, but 
> it always only gets errors from the same drive, so I was assuming it was the 
> drive. I only have to setup the raid0 array, and put some light load on it for 
> the kernel to start complaining, and eventually it just kicks the drive 
> completely with the following messages:
> 
> sd 3:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
> end_request: I/O error, dev sdb, sector 202026972
> 
> The drive does work fine prior to the frozen timeout errors. And I was using 
> it in windows (same raid0 config) just fine with no errors what so ever.

Can you post full dmesg output?  The above doesn't tell much about ATA
side of things.

Thanks.

-- 
tejun
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/