[PATCH 1/3] include/linux/logging.h: Separate logging functions out of kernel.h
From: Joe Perches
Date: Thu Sep 10 2009 - 23:30:03 EST
Moved all logging/tracing bits to a separate file
Neatened a bit for checkpatch complaints
Signed-off-by: Joe Perches <joe@xxxxxxxxxxx>
---
include/linux/kernel.h | 293 +-------------------------------------------
include/linux/logging.h | 313 +++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 314 insertions(+), 292 deletions(-)
create mode 100644 include/linux/logging.h
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index f61039e..20eb8ae 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -17,10 +17,10 @@
#include <linux/typecheck.h>
#include <linux/ratelimit.h>
#include <linux/dynamic_debug.h>
+#include <linux/logging.h>
#include <asm/byteorder.h>
#include <asm/bug.h>
-
struct ftrace_branch_data {
const char *func;
const char *file;
@@ -112,9 +112,6 @@ static inline void branch_profiler(struct ftrace_branch_data *data, int cond)
#endif /* CONFIG_PROFILE_ALL_BRANCHES */
#endif
-extern const char linux_banner[];
-extern const char linux_proc_banner[];
-
#define USHORT_MAX ((u16)(~0U))
#define SHORT_MAX ((s16)(USHORT_MAX>>1))
#define SHORT_MIN (-SHORT_MAX - 1)
@@ -180,31 +177,6 @@ extern const char linux_proc_banner[];
*/
#define lower_32_bits(n) ((u32)(n))
-#define KERN_EMERG "<0>" /* system is unusable */
-#define KERN_ALERT "<1>" /* action must be taken immediately */
-#define KERN_CRIT "<2>" /* critical conditions */
-#define KERN_ERR "<3>" /* error conditions */
-#define KERN_WARNING "<4>" /* warning conditions */
-#define KERN_NOTICE "<5>" /* normal but significant condition */
-#define KERN_INFO "<6>" /* informational */
-#define KERN_DEBUG "<7>" /* debug-level messages */
-
-/* Use the default kernel loglevel */
-#define KERN_DEFAULT "<d>"
-/*
- * Annotation for a "continued" line of log printout (only done after a
- * line that had no enclosing \n). Only to be used by core/arch code
- * during early bootup (a continued line is not SMP-safe otherwise).
- */
-#define KERN_CONT "<c>"
-
-extern int console_printk[];
-
-#define console_loglevel (console_printk[0])
-#define default_message_loglevel (console_printk[1])
-#define minimum_console_loglevel (console_printk[2])
-#define default_console_loglevel (console_printk[3])
-
struct completion;
struct pt_regs;
struct user;
@@ -303,93 +275,8 @@ extern int func_ptr_is_kernel_text(void *ptr);
struct pid;
extern struct pid *session_of_pgrp(struct pid *pgrp);
-/*
- * FW_BUG
- * Add this to a message where you are sure the firmware is buggy or behaves
- * really stupid or out of spec. Be aware that the responsible BIOS developer
- * should be able to fix this issue or at least get a concrete idea of the
- * problem by reading your message without the need of looking at the kernel
- * code.
- *
- * Use it for definite and high priority BIOS bugs.
- *
- * FW_WARN
- * Use it for not that clear (e.g. could the kernel messed up things already?)
- * and medium priority BIOS bugs.
- *
- * FW_INFO
- * Use this one if you want to tell the user or vendor about something
- * suspicious, but generally harmless related to the firmware.
- *
- * Use it for information or very low priority BIOS bugs.
- */
-#define FW_BUG "[Firmware Bug]: "
-#define FW_WARN "[Firmware Warn]: "
-#define FW_INFO "[Firmware Info]: "
-
-#ifdef CONFIG_PRINTK
-asmlinkage int vprintk(const char *fmt, va_list args)
- __attribute__ ((format (printf, 1, 0)));
-asmlinkage int printk(const char * fmt, ...)
- __attribute__ ((format (printf, 1, 2))) __cold;
-
-extern struct ratelimit_state printk_ratelimit_state;
-extern int printk_ratelimit(void);
-extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
- unsigned int interval_msec);
-
-/*
- * Print a one-time message (analogous to WARN_ONCE() et al):
- */
-#define printk_once(x...) ({ \
- static int __print_once = 1; \
- \
- if (__print_once) { \
- __print_once = 0; \
- printk(x); \
- } \
-})
-
-void log_buf_kexec_setup(void);
-#else
-static inline int vprintk(const char *s, va_list args)
- __attribute__ ((format (printf, 1, 0)));
-static inline int vprintk(const char *s, va_list args) { return 0; }
-static inline int printk(const char *s, ...)
- __attribute__ ((format (printf, 1, 2)));
-static inline int __cold printk(const char *s, ...) { return 0; }
-static inline int printk_ratelimit(void) { return 0; }
-static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies, \
- unsigned int interval_msec) \
- { return false; }
-
-/* No effect, but we still get type checking even in the !PRINTK case: */
-#define printk_once(x...) printk(x)
-
-static inline void log_buf_kexec_setup(void)
-{
-}
-#endif
-
-extern int printk_needs_cpu(int cpu);
-extern void printk_tick(void);
-
-extern void asmlinkage __attribute__((format(printf, 1, 2)))
- early_printk(const char *fmt, ...);
-
unsigned long int_sqrt(unsigned long);
-static inline void console_silent(void)
-{
- console_loglevel = 0;
-}
-
-static inline void console_verbose(void)
-{
- if (console_loglevel)
- console_loglevel = 15;
-}
-
extern void bust_spinlocks(int yes);
extern void wake_up_klogd(void);
extern int oops_in_progress; /* If set, an oops, panic(), BUG() or die() is in progress */
@@ -397,7 +284,6 @@ extern int panic_timeout;
extern int panic_on_oops;
extern int panic_on_unrecovered_nmi;
extern int panic_on_io_nmi;
-extern const char *print_tainted(void);
extern void add_taint(unsigned flag);
extern int test_taint(unsigned flag);
extern unsigned long get_taint(void);
@@ -452,183 +338,6 @@ static inline char *pack_hex_byte(char *buf, u8 byte)
return buf;
}
-#ifndef pr_fmt
-#define pr_fmt(fmt) fmt
-#endif
-
-#define pr_emerg(fmt, ...) \
- printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_alert(fmt, ...) \
- printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_crit(fmt, ...) \
- printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_err(fmt, ...) \
- printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_warning(fmt, ...) \
- printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_notice(fmt, ...) \
- printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_info(fmt, ...) \
- printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_cont(fmt, ...) \
- printk(KERN_CONT fmt, ##__VA_ARGS__)
-
-/* pr_devel() should produce zero code unless DEBUG is defined */
-#ifdef DEBUG
-#define pr_devel(fmt, ...) \
- printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
-#else
-#define pr_devel(fmt, ...) \
- ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
-#endif
-
-/* If you are writing a driver, please use dev_dbg instead */
-#if defined(DEBUG)
-#define pr_debug(fmt, ...) \
- printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
-#elif defined(CONFIG_DYNAMIC_DEBUG)
-/* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */
-#define pr_debug(fmt, ...) do { \
- dynamic_pr_debug(fmt, ##__VA_ARGS__); \
- } while (0)
-#else
-#define pr_debug(fmt, ...) \
- ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
-#endif
-
-/*
- * General tracing related utility functions - trace_printk(),
- * tracing_on/tracing_off and tracing_start()/tracing_stop
- *
- * Use tracing_on/tracing_off when you want to quickly turn on or off
- * tracing. It simply enables or disables the recording of the trace events.
- * This also corresponds to the user space /sys/kernel/debug/tracing/tracing_on
- * file, which gives a means for the kernel and userspace to interact.
- * Place a tracing_off() in the kernel where you want tracing to end.
- * From user space, examine the trace, and then echo 1 > tracing_on
- * to continue tracing.
- *
- * tracing_stop/tracing_start has slightly more overhead. It is used
- * by things like suspend to ram where disabling the recording of the
- * trace is not enough, but tracing must actually stop because things
- * like calling smp_processor_id() may crash the system.
- *
- * Most likely, you want to use tracing_on/tracing_off.
- */
-#ifdef CONFIG_RING_BUFFER
-void tracing_on(void);
-void tracing_off(void);
-/* trace_off_permanent stops recording with no way to bring it back */
-void tracing_off_permanent(void);
-int tracing_is_on(void);
-#else
-static inline void tracing_on(void) { }
-static inline void tracing_off(void) { }
-static inline void tracing_off_permanent(void) { }
-static inline int tracing_is_on(void) { return 0; }
-#endif
-#ifdef CONFIG_TRACING
-extern void tracing_start(void);
-extern void tracing_stop(void);
-extern void ftrace_off_permanent(void);
-
-extern void
-ftrace_special(unsigned long arg1, unsigned long arg2, unsigned long arg3);
-
-static inline void __attribute__ ((format (printf, 1, 2)))
-____trace_printk_check_format(const char *fmt, ...)
-{
-}
-#define __trace_printk_check_format(fmt, args...) \
-do { \
- if (0) \
- ____trace_printk_check_format(fmt, ##args); \
-} while (0)
-
-/**
- * trace_printk - printf formatting in the ftrace buffer
- * @fmt: the printf format for printing
- *
- * Note: __trace_printk is an internal function for trace_printk and
- * the @ip is passed in via the trace_printk macro.
- *
- * This function allows a kernel developer to debug fast path sections
- * that printk is not appropriate for. By scattering in various
- * printk like tracing in the code, a developer can quickly see
- * where problems are occurring.
- *
- * This is intended as a debugging tool for the developer only.
- * Please refrain from leaving trace_printks scattered around in
- * your code.
- */
-
-#define trace_printk(fmt, args...) \
-do { \
- __trace_printk_check_format(fmt, ##args); \
- if (__builtin_constant_p(fmt)) { \
- static const char *trace_printk_fmt \
- __attribute__((section("__trace_printk_fmt"))) = \
- __builtin_constant_p(fmt) ? fmt : NULL; \
- \
- __trace_bprintk(_THIS_IP_, trace_printk_fmt, ##args); \
- } else \
- __trace_printk(_THIS_IP_, fmt, ##args); \
-} while (0)
-
-extern int
-__trace_bprintk(unsigned long ip, const char *fmt, ...)
- __attribute__ ((format (printf, 2, 3)));
-
-extern int
-__trace_printk(unsigned long ip, const char *fmt, ...)
- __attribute__ ((format (printf, 2, 3)));
-
-/*
- * The double __builtin_constant_p is because gcc will give us an error
- * if we try to allocate the static variable to fmt if it is not a
- * constant. Even with the outer if statement.
- */
-#define ftrace_vprintk(fmt, vargs) \
-do { \
- if (__builtin_constant_p(fmt)) { \
- static const char *trace_printk_fmt \
- __attribute__((section("__trace_printk_fmt"))) = \
- __builtin_constant_p(fmt) ? fmt : NULL; \
- \
- __ftrace_vbprintk(_THIS_IP_, trace_printk_fmt, vargs); \
- } else \
- __ftrace_vprintk(_THIS_IP_, fmt, vargs); \
-} while (0)
-
-extern int
-__ftrace_vbprintk(unsigned long ip, const char *fmt, va_list ap);
-
-extern int
-__ftrace_vprintk(unsigned long ip, const char *fmt, va_list ap);
-
-extern void ftrace_dump(void);
-#else
-static inline void
-ftrace_special(unsigned long arg1, unsigned long arg2, unsigned long arg3) { }
-static inline int
-trace_printk(const char *fmt, ...) __attribute__ ((format (printf, 1, 2)));
-
-static inline void tracing_start(void) { }
-static inline void tracing_stop(void) { }
-static inline void ftrace_off_permanent(void) { }
-static inline int
-trace_printk(const char *fmt, ...)
-{
- return 0;
-}
-static inline int
-ftrace_vprintk(const char *fmt, va_list ap)
-{
- return 0;
-}
-static inline void ftrace_dump(void) { }
-#endif /* CONFIG_TRACING */
-
/*
* Display an IP address in readable format.
*/
diff --git a/include/linux/logging.h b/include/linux/logging.h
new file mode 100644
index 0000000..361d5ed
--- /dev/null
+++ b/include/linux/logging.h
@@ -0,0 +1,313 @@
+#ifndef _LINUX_LOGGING_H
+#define _LINUX_LOGGING_H
+
+#ifdef __KERNEL__
+
+extern const char linux_banner[];
+extern const char linux_proc_banner[];
+
+/*
+ * Defines used for printk logging level
+ */
+
+#define KERN_EMERG "<0>" /* system is unusable */
+#define KERN_ALERT "<1>" /* action must be taken immediately */
+#define KERN_CRIT "<2>" /* critical conditions */
+#define KERN_ERR "<3>" /* error conditions */
+#define KERN_WARNING "<4>" /* warning conditions */
+#define KERN_NOTICE "<5>" /* normal but significant condition */
+#define KERN_INFO "<6>" /* informational */
+#define KERN_DEBUG "<7>" /* debug-level messages */
+
+/* Use the default kernel loglevel */
+#define KERN_DEFAULT "<d>"
+/*
+ * Annotation for a "continued" line of log printout (only done after a
+ * line that had no enclosing \n). Only to be used by core/arch code
+ * during early bootup (a continued line is not SMP-safe otherwise).
+ */
+#define KERN_CONT "<c>"
+
+/*
+ * Console elements
+ */
+
+extern int console_printk[];
+
+#define console_loglevel (console_printk[0])
+#define default_message_loglevel (console_printk[1])
+#define minimum_console_loglevel (console_printk[2])
+#define default_console_loglevel (console_printk[3])
+
+static inline void console_silent(void)
+{
+ console_loglevel = 0;
+}
+
+static inline void console_verbose(void)
+{
+ if (console_loglevel)
+ console_loglevel = 15;
+}
+
+/*
+ * FW_BUG
+ * Add this to a message where you are sure the firmware is buggy or behaves
+ * really stupid or out of spec. Be aware that the responsible BIOS developer
+ * should be able to fix this issue or at least get a concrete idea of the
+ * problem by reading your message without the need of looking at the kernel
+ * code.
+ *
+ * Use it for definite and high priority BIOS bugs.
+ *
+ * FW_WARN
+ * Use it for not that clear (e.g. could the kernel messed up things already?)
+ * and medium priority BIOS bugs.
+ *
+ * FW_INFO
+ * Use this one if you want to tell the user or vendor about something
+ * suspicious, but generally harmless related to the firmware.
+ *
+ * Use it for information or very low priority BIOS bugs.
+ */
+#define FW_BUG "[Firmware Bug]: "
+#define FW_WARN "[Firmware Warn]: "
+#define FW_INFO "[Firmware Info]: "
+
+#ifdef CONFIG_PRINTK
+
+asmlinkage int vprintk(const char *fmt, va_list args)
+ __attribute__ ((format (printf, 1, 0)));
+asmlinkage int printk(const char *fmt, ...)
+ __attribute__ ((format (printf, 1, 2))) __cold;
+
+extern struct ratelimit_state printk_ratelimit_state;
+extern int printk_ratelimit(void);
+extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
+ unsigned int interval_msec);
+
+/*
+ * Print a one-time message (analogous to WARN_ONCE() et al):
+ */
+#define printk_once(fmt, ...) \
+({ \
+ static int __print_once = 1; \
+ \
+ if (__print_once) { \
+ __print_once = 0; \
+ printk(fmt, ##__VA_ARGS__); \
+ } \
+})
+
+void log_buf_kexec_setup(void);
+
+#else
+
+static inline int vprintk(const char *s, va_list args)
+ __attribute__ ((format (printf, 1, 0)));
+static inline int vprintk(const char *s, va_list args) { return 0; }
+static inline int printk(const char *s, ...)
+ __attribute__ ((format (printf, 1, 2)));
+static inline int __cold printk(const char *s, ...) { return 0; }
+static inline int printk_ratelimit(void) { return 0; }
+static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies,
+ unsigned int interval_msec)
+{
+ return false;
+}
+
+/* No effect, but we still get type checking even in the !PRINTK case: */
+#define printk_once(fmt, ...) printk(fmt, ##__VA_ARGS__)
+
+static inline void log_buf_kexec_setup(void)
+{
+}
+
+#endif /* CONFIG_PRINTK */
+
+extern int printk_needs_cpu(int cpu);
+extern void printk_tick(void);
+
+extern void asmlinkage __attribute__((format(printf, 1, 2)))
+ early_printk(const char *fmt, ...);
+
+extern const char *print_tainted(void);
+
+#ifndef pr_fmt
+#define pr_fmt(fmt) fmt
+#endif
+
+#define pr_emerg(fmt, ...) \
+ printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_alert(fmt, ...) \
+ printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_crit(fmt, ...) \
+ printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_err(fmt, ...) \
+ printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warning(fmt, ...) \
+ printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_notice(fmt, ...) \
+ printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_info(fmt, ...) \
+ printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_cont(fmt, ...) \
+ printk(KERN_CONT fmt, ##__VA_ARGS__)
+
+/* pr_devel() should produce zero code unless DEBUG is defined */
+#ifdef DEBUG
+#define pr_devel(fmt, ...) \
+ printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#else
+#define pr_devel(fmt, ...) \
+ ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
+#endif
+
+/* If you are writing a driver, please use dev_dbg instead */
+#if defined(DEBUG)
+#define pr_debug(fmt, ...) \
+ printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#elif defined(CONFIG_DYNAMIC_DEBUG)
+/* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */
+#define pr_debug(fmt, ...) \
+ do { dynamic_pr_debug(fmt, ##__VA_ARGS__); } while (0)
+#else
+#define pr_debug(fmt, ...) \
+ ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
+#endif
+
+/*
+ * General tracing related utility functions - trace_printk(),
+ * tracing_on/tracing_off and tracing_start()/tracing_stop
+ *
+ * Use tracing_on/tracing_off when you want to quickly turn on or off
+ * tracing. It simply enables or disables the recording of the trace events.
+ * This also corresponds to the user space /sys/kernel/debug/tracing/tracing_on
+ * file, which gives a means for the kernel and userspace to interact.
+ * Place a tracing_off() in the kernel where you want tracing to end.
+ * From user space, examine the trace, and then echo 1 > tracing_on
+ * to continue tracing.
+ *
+ * tracing_stop/tracing_start has slightly more overhead. It is used
+ * by things like suspend to ram where disabling the recording of the
+ * trace is not enough, but tracing must actually stop because things
+ * like calling smp_processor_id() may crash the system.
+ *
+ * Most likely, you want to use tracing_on/tracing_off.
+ */
+#ifdef CONFIG_RING_BUFFER
+void tracing_on(void);
+void tracing_off(void);
+/* trace_off_permanent stops recording with no way to bring it back */
+void tracing_off_permanent(void);
+int tracing_is_on(void);
+#else
+static inline void tracing_on(void) { }
+static inline void tracing_off(void) { }
+static inline void tracing_off_permanent(void) { }
+static inline int tracing_is_on(void) { return 0; }
+#endif
+#ifdef CONFIG_TRACING
+extern void tracing_start(void);
+extern void tracing_stop(void);
+extern void ftrace_off_permanent(void);
+
+extern void
+ftrace_special(unsigned long arg1, unsigned long arg2, unsigned long arg3);
+
+static inline void __attribute__ ((format (printf, 1, 2)))
+____trace_printk_check_format(const char *fmt, ...)
+{
+}
+#define __trace_printk_check_format(fmt, args...) \
+do { \
+ if (0) \
+ ____trace_printk_check_format(fmt, ##args); \
+} while (0)
+
+/**
+ * trace_printk - printf formatting in the ftrace buffer
+ * @fmt: the printf format for printing
+ *
+ * Note: __trace_printk is an internal function for trace_printk and
+ * the @ip is passed in via the trace_printk macro.
+ *
+ * This function allows a kernel developer to debug fast path sections
+ * that printk is not appropriate for. By scattering in various
+ * printk like tracing in the code, a developer can quickly see
+ * where problems are occurring.
+ *
+ * This is intended as a debugging tool for the developer only.
+ * Please refrain from leaving trace_printks scattered around in
+ * your code.
+ */
+
+#define trace_printk(fmt, args...) \
+do { \
+ __trace_printk_check_format(fmt, ##args); \
+ if (__builtin_constant_p(fmt)) { \
+ static const char *trace_printk_fmt \
+ __attribute__((section("__trace_printk_fmt"))) = \
+ __builtin_constant_p(fmt) ? fmt : NULL; \
+ \
+ __trace_bprintk(_THIS_IP_, trace_printk_fmt, ##args); \
+ } else \
+ __trace_printk(_THIS_IP_, fmt, ##args); \
+} while (0)
+
+extern int
+__trace_bprintk(unsigned long ip, const char *fmt, ...)
+ __attribute__ ((format (printf, 2, 3)));
+
+extern int
+__trace_printk(unsigned long ip, const char *fmt, ...)
+ __attribute__ ((format (printf, 2, 3)));
+
+/*
+ * The double __builtin_constant_p is because gcc will give us an error
+ * if we try to allocate the static variable to fmt if it is not a
+ * constant. Even with the outer if statement.
+ */
+#define ftrace_vprintk(fmt, vargs) \
+do { \
+ if (__builtin_constant_p(fmt)) { \
+ static const char *trace_printk_fmt \
+ __attribute__((section("__trace_printk_fmt"))) = \
+ __builtin_constant_p(fmt) ? fmt : NULL; \
+ \
+ __ftrace_vbprintk(_THIS_IP_, trace_printk_fmt, vargs); \
+ } else \
+ __ftrace_vprintk(_THIS_IP_, fmt, vargs); \
+} while (0)
+
+extern int
+__ftrace_vbprintk(unsigned long ip, const char *fmt, va_list ap);
+
+extern int
+__ftrace_vprintk(unsigned long ip, const char *fmt, va_list ap);
+
+extern void ftrace_dump(void);
+#else
+static inline void
+ftrace_special(unsigned long arg1, unsigned long arg2, unsigned long arg3) { }
+static inline int
+trace_printk(const char *fmt, ...) __attribute__ ((format (printf, 1, 2)));
+
+static inline void tracing_start(void) { }
+static inline void tracing_stop(void) { }
+static inline void ftrace_off_permanent(void) { }
+static inline int
+trace_printk(const char *fmt, ...)
+{
+ return 0;
+}
+static inline int
+ftrace_vprintk(const char *fmt, va_list ap)
+{
+ return 0;
+}
+static inline void ftrace_dump(void) { }
+#endif /* CONFIG_TRACING */
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_LOGGING_H */
--
1.6.3.1.10.g659a0.dirty
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/