[PATCH 3/3] viafb: hardware acceleration initialization cleanup
From: Florian Tobias Schandinat
Date: Sat Sep 05 2009 - 15:54:40 EST
viafb: hardware acceleration initialization cleanup
The main motivation of this patch was to merge the three initialization
functions in one and clean it up. However as some changes in other code
areas where needed to do it right some small other changes were made.
Changes to viafb_par:
io_virt renamed as engine_mmio and moved to shared
VQ_start renamed as vq_vram_addr and moved to shared
VQ_end removed as it is easily recalculatable
vq_vram_addr is not strictly needed but keep it to track where we
allocated video memory. The memory allocated for the virtual queue was
shrunk to VQ_SIZE as VQ_SIZE+CURSOR_SIZE looked like a bug to me. But to
be honest I don't have the faintest idea what virtual queues are for in
the graphic hardware and whether the driver needs them in any way. I
only know that they aren't directly accessed by the driver and so the
only potential current use would be as hardware internal buffers. For
now keep them to avoid regressions and only remove the double cursor
allocation.
The most changes were caused by renames and the mentioned structure
changes so the chance of regressions is pretty low.
The meaning of viafb_accel changed slightly as previously it was changed
back and forth in the code and allowed to enable the hardware
acceleration by software if previously disabled. The new behaviour is
that viafb_accel=0 always prevents hardware acceleration. With
viafb_accel!=0 the acceleration can be freely choosen by set_var. This
means viafb_accel is a diagnostic tool and if someone has to use
viafb_accel=0 the driver needs to be fixed.
As this is mostly a code cleanup no regressions beside the slightly
change of viafb_accel is expected.
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@xxxxxx>
---
accel.c | 268 ++++++++++++++++++++++++------------------------------------
accel.h | 8 +-
global.c | 1 -
hw.h | 1 -
viafbdev.c | 80 ++++++++----------
viafbdev.h | 7 +-
6 files changed, 148 insertions(+), 217 deletions(-)
diff --git a/drivers/video/via/accel.c b/drivers/video/via/accel.c
index 503f9d8..42ab4b4 100644
--- a/drivers/video/via/accel.c
+++ b/drivers/video/via/accel.c
@@ -308,9 +308,22 @@ static int hw_bitblt_2(void __iomem *engine, u8 op, u32 width, u32 height,
return 0;
}
-void viafb_init_accel(struct viafb_shared *shared)
+int viafb_init_engine(struct fb_info *info)
{
- switch (shared->chip_info.gfx_chip_name) {
+ struct viafb_par *viapar = info->par;
+ void __iomem *engine;
+ u32 vq_start_addr, vq_end_addr, vq_start_low, vq_end_low, vq_high,
+ vq_len, chip_name = viapar->shared->chip_info.gfx_chip_name;
+
+ engine = ioremap_nocache(info->fix.mmio_start, info->fix.mmio_len);
+ viapar->shared->engine_mmio = engine;
+ if (!engine) {
+ printk(KERN_WARNING "viafb_init_accel: ioremap failed, "
+ "hardware acceleration disabled\n");
+ return -ENOMEM;
+ }
+
+ switch (chip_name) {
case UNICHROME_CLE266:
case UNICHROME_K400:
case UNICHROME_K800:
@@ -321,186 +334,115 @@ void viafb_init_accel(struct viafb_shared *shared)
case UNICHROME_K8M890:
case UNICHROME_P4M890:
case UNICHROME_P4M900:
- shared->hw_bitblt = hw_bitblt_1;
+ viapar->shared->hw_bitblt = hw_bitblt_1;
break;
case UNICHROME_VX800:
- shared->hw_bitblt = hw_bitblt_2;
+ viapar->shared->hw_bitblt = hw_bitblt_2;
break;
default:
- shared->hw_bitblt = NULL;
+ viapar->shared->hw_bitblt = NULL;
}
- viaparinfo->fbmem_free -= CURSOR_SIZE;
- shared->cursor_vram_addr = viaparinfo->fbmem_free;
- viaparinfo->fbmem_used += CURSOR_SIZE;
+ viapar->fbmem_free -= CURSOR_SIZE;
+ viapar->shared->cursor_vram_addr = viapar->fbmem_free;
+ viapar->fbmem_used += CURSOR_SIZE;
- /* Reverse 8*1024 memory space for cursor image */
- viaparinfo->fbmem_free -= (CURSOR_SIZE + VQ_SIZE);
- viaparinfo->VQ_start = viaparinfo->fbmem_free;
- viaparinfo->VQ_end = viaparinfo->VQ_start + VQ_SIZE - 1;
- viaparinfo->fbmem_used += (CURSOR_SIZE + VQ_SIZE);
-}
-
-void viafb_init_2d_engine(void)
-{
- u32 dwVQStartAddr, dwVQEndAddr;
- u32 dwVQLen, dwVQStartL, dwVQEndL, dwVQStartEndH;
+ viapar->fbmem_free -= VQ_SIZE;
+ viapar->shared->vq_vram_addr = viapar->fbmem_free;
+ viapar->fbmem_used += VQ_SIZE;
/* Init AGP and VQ regs */
- switch (viaparinfo->chip_info->gfx_chip_name) {
+ switch (chip_name) {
case UNICHROME_K8M890:
case UNICHROME_P4M900:
- writel(0x00100000, viaparinfo->io_virt + VIA_REG_CR_TRANSET);
- writel(0x680A0000, viaparinfo->io_virt + VIA_REG_CR_TRANSPACE);
- writel(0x02000000, viaparinfo->io_virt + VIA_REG_CR_TRANSPACE);
+ writel(0x00100000, engine + VIA_REG_CR_TRANSET);
+ writel(0x680A0000, engine + VIA_REG_CR_TRANSPACE);
+ writel(0x02000000, engine + VIA_REG_CR_TRANSPACE);
break;
default:
- writel(0x00100000, viaparinfo->io_virt + VIA_REG_TRANSET);
- writel(0x00000000, viaparinfo->io_virt + VIA_REG_TRANSPACE);
- writel(0x00333004, viaparinfo->io_virt + VIA_REG_TRANSPACE);
- writel(0x60000000, viaparinfo->io_virt + VIA_REG_TRANSPACE);
- writel(0x61000000, viaparinfo->io_virt + VIA_REG_TRANSPACE);
- writel(0x62000000, viaparinfo->io_virt + VIA_REG_TRANSPACE);
- writel(0x63000000, viaparinfo->io_virt + VIA_REG_TRANSPACE);
- writel(0x64000000, viaparinfo->io_virt + VIA_REG_TRANSPACE);
- writel(0x7D000000, viaparinfo->io_virt + VIA_REG_TRANSPACE);
-
- writel(0xFE020000, viaparinfo->io_virt + VIA_REG_TRANSET);
- writel(0x00000000, viaparinfo->io_virt + VIA_REG_TRANSPACE);
+ writel(0x00100000, engine + VIA_REG_TRANSET);
+ writel(0x00000000, engine + VIA_REG_TRANSPACE);
+ writel(0x00333004, engine + VIA_REG_TRANSPACE);
+ writel(0x60000000, engine + VIA_REG_TRANSPACE);
+ writel(0x61000000, engine + VIA_REG_TRANSPACE);
+ writel(0x62000000, engine + VIA_REG_TRANSPACE);
+ writel(0x63000000, engine + VIA_REG_TRANSPACE);
+ writel(0x64000000, engine + VIA_REG_TRANSPACE);
+ writel(0x7D000000, engine + VIA_REG_TRANSPACE);
+
+ writel(0xFE020000, engine + VIA_REG_TRANSET);
+ writel(0x00000000, engine + VIA_REG_TRANSPACE);
break;
}
- if (viaparinfo->VQ_start != 0) {
- /* Enable VQ */
- dwVQStartAddr = viaparinfo->VQ_start;
- dwVQEndAddr = viaparinfo->VQ_end;
-
- dwVQStartL = 0x50000000 | (dwVQStartAddr & 0xFFFFFF);
- dwVQEndL = 0x51000000 | (dwVQEndAddr & 0xFFFFFF);
- dwVQStartEndH = 0x52000000 |
- ((dwVQStartAddr & 0xFF000000) >> 24) |
- ((dwVQEndAddr & 0xFF000000) >> 16);
- dwVQLen = 0x53000000 | (VQ_SIZE >> 3);
- switch (viaparinfo->chip_info->gfx_chip_name) {
- case UNICHROME_K8M890:
- case UNICHROME_P4M900:
- dwVQStartL |= 0x20000000;
- dwVQEndL |= 0x20000000;
- dwVQStartEndH |= 0x20000000;
- dwVQLen |= 0x20000000;
- break;
- default:
- break;
- }
- switch (viaparinfo->chip_info->gfx_chip_name) {
- case UNICHROME_K8M890:
- case UNICHROME_P4M900:
- writel(0x00100000,
- viaparinfo->io_virt + VIA_REG_CR_TRANSET);
- writel(dwVQStartEndH,
- viaparinfo->io_virt + VIA_REG_CR_TRANSPACE);
- writel(dwVQStartL,
- viaparinfo->io_virt + VIA_REG_CR_TRANSPACE);
- writel(dwVQEndL,
- viaparinfo->io_virt + VIA_REG_CR_TRANSPACE);
- writel(dwVQLen,
- viaparinfo->io_virt + VIA_REG_CR_TRANSPACE);
- writel(0x74301001,
- viaparinfo->io_virt + VIA_REG_CR_TRANSPACE);
- writel(0x00000000,
- viaparinfo->io_virt + VIA_REG_CR_TRANSPACE);
- break;
- default:
- writel(0x00FE0000,
- viaparinfo->io_virt + VIA_REG_TRANSET);
- writel(0x080003FE,
- viaparinfo->io_virt + VIA_REG_TRANSPACE);
- writel(0x0A00027C,
- viaparinfo->io_virt + VIA_REG_TRANSPACE);
- writel(0x0B000260,
- viaparinfo->io_virt + VIA_REG_TRANSPACE);
- writel(0x0C000274,
- viaparinfo->io_virt + VIA_REG_TRANSPACE);
- writel(0x0D000264,
- viaparinfo->io_virt + VIA_REG_TRANSPACE);
- writel(0x0E000000,
- viaparinfo->io_virt + VIA_REG_TRANSPACE);
- writel(0x0F000020,
- viaparinfo->io_virt + VIA_REG_TRANSPACE);
- writel(0x1000027E,
- viaparinfo->io_virt + VIA_REG_TRANSPACE);
- writel(0x110002FE,
- viaparinfo->io_virt + VIA_REG_TRANSPACE);
- writel(0x200F0060,
- viaparinfo->io_virt + VIA_REG_TRANSPACE);
-
- writel(0x00000006,
- viaparinfo->io_virt + VIA_REG_TRANSPACE);
- writel(0x40008C0F,
- viaparinfo->io_virt + VIA_REG_TRANSPACE);
- writel(0x44000000,
- viaparinfo->io_virt + VIA_REG_TRANSPACE);
- writel(0x45080C04,
- viaparinfo->io_virt + VIA_REG_TRANSPACE);
- writel(0x46800408,
- viaparinfo->io_virt + VIA_REG_TRANSPACE);
-
- writel(dwVQStartEndH,
- viaparinfo->io_virt + VIA_REG_TRANSPACE);
- writel(dwVQStartL,
- viaparinfo->io_virt + VIA_REG_TRANSPACE);
- writel(dwVQEndL,
- viaparinfo->io_virt + VIA_REG_TRANSPACE);
- writel(dwVQLen,
- viaparinfo->io_virt + VIA_REG_TRANSPACE);
- break;
- }
- } else {
- /* Disable VQ */
- switch (viaparinfo->chip_info->gfx_chip_name) {
- case UNICHROME_K8M890:
- case UNICHROME_P4M900:
- writel(0x00100000,
- viaparinfo->io_virt + VIA_REG_CR_TRANSET);
- writel(0x74301000,
- viaparinfo->io_virt + VIA_REG_CR_TRANSPACE);
- break;
- default:
- writel(0x00FE0000,
- viaparinfo->io_virt + VIA_REG_TRANSET);
- writel(0x00000004,
- viaparinfo->io_virt + VIA_REG_TRANSPACE);
- writel(0x40008C0F,
- viaparinfo->io_virt + VIA_REG_TRANSPACE);
- writel(0x44000000,
- viaparinfo->io_virt + VIA_REG_TRANSPACE);
- writel(0x45080C04,
- viaparinfo->io_virt + VIA_REG_TRANSPACE);
- writel(0x46800408,
- viaparinfo->io_virt + VIA_REG_TRANSPACE);
- break;
- }
+ /* Enable VQ */
+ vq_start_addr = viapar->shared->vq_vram_addr;
+ vq_end_addr = viapar->shared->vq_vram_addr + VQ_SIZE - 1;
+
+ vq_start_low = 0x50000000 | (vq_start_addr & 0xFFFFFF);
+ vq_end_low = 0x51000000 | (vq_end_addr & 0xFFFFFF);
+ vq_high = 0x52000000 | ((vq_start_addr & 0xFF000000) >> 24) |
+ ((vq_end_addr & 0xFF000000) >> 16);
+ vq_len = 0x53000000 | (VQ_SIZE >> 3);
+
+ switch (chip_name) {
+ case UNICHROME_K8M890:
+ case UNICHROME_P4M900:
+ vq_start_low |= 0x20000000;
+ vq_end_low |= 0x20000000;
+ vq_high |= 0x20000000;
+ vq_len |= 0x20000000;
+
+ writel(0x00100000, engine + VIA_REG_CR_TRANSET);
+ writel(vq_high, engine + VIA_REG_CR_TRANSPACE);
+ writel(vq_start_low, engine + VIA_REG_CR_TRANSPACE);
+ writel(vq_end_low, engine + VIA_REG_CR_TRANSPACE);
+ writel(vq_len, engine + VIA_REG_CR_TRANSPACE);
+ writel(0x74301001, engine + VIA_REG_CR_TRANSPACE);
+ writel(0x00000000, engine + VIA_REG_CR_TRANSPACE);
+ break;
+ default:
+ writel(0x00FE0000, engine + VIA_REG_TRANSET);
+ writel(0x080003FE, engine + VIA_REG_TRANSPACE);
+ writel(0x0A00027C, engine + VIA_REG_TRANSPACE);
+ writel(0x0B000260, engine + VIA_REG_TRANSPACE);
+ writel(0x0C000274, engine + VIA_REG_TRANSPACE);
+ writel(0x0D000264, engine + VIA_REG_TRANSPACE);
+ writel(0x0E000000, engine + VIA_REG_TRANSPACE);
+ writel(0x0F000020, engine + VIA_REG_TRANSPACE);
+ writel(0x1000027E, engine + VIA_REG_TRANSPACE);
+ writel(0x110002FE, engine + VIA_REG_TRANSPACE);
+ writel(0x200F0060, engine + VIA_REG_TRANSPACE);
+
+ writel(0x00000006, engine + VIA_REG_TRANSPACE);
+ writel(0x40008C0F, engine + VIA_REG_TRANSPACE);
+ writel(0x44000000, engine + VIA_REG_TRANSPACE);
+ writel(0x45080C04, engine + VIA_REG_TRANSPACE);
+ writel(0x46800408, engine + VIA_REG_TRANSPACE);
+
+ writel(vq_high, engine + VIA_REG_TRANSPACE);
+ writel(vq_start_low, engine + VIA_REG_TRANSPACE);
+ writel(vq_end_low, engine + VIA_REG_TRANSPACE);
+ writel(vq_len, engine + VIA_REG_TRANSPACE);
+ break;
}
-}
-void viafb_hw_cursor_init(void)
-{
/* Set Cursor Image Base Address */
- writel(viaparinfo->shared->cursor_vram_addr,
- viaparinfo->io_virt + VIA_REG_CURSOR_MODE);
- writel(0x0, viaparinfo->io_virt + VIA_REG_CURSOR_POS);
- writel(0x0, viaparinfo->io_virt + VIA_REG_CURSOR_ORG);
- writel(0x0, viaparinfo->io_virt + VIA_REG_CURSOR_BG);
- writel(0x0, viaparinfo->io_virt + VIA_REG_CURSOR_FG);
+ writel(viapar->shared->cursor_vram_addr, engine + VIA_REG_CURSOR_MODE);
+ writel(0x0, engine + VIA_REG_CURSOR_POS);
+ writel(0x0, engine + VIA_REG_CURSOR_ORG);
+ writel(0x0, engine + VIA_REG_CURSOR_BG);
+ writel(0x0, engine + VIA_REG_CURSOR_FG);
+ return 0;
}
void viafb_show_hw_cursor(struct fb_info *info, int Status)
{
- u32 temp;
- u32 iga_path = ((struct viafb_par *)(info->par))->iga_path;
+ struct viafb_par *viapar = info->par;
+ u32 temp, iga_path = viapar->iga_path;
- temp = readl(viaparinfo->io_virt + VIA_REG_CURSOR_MODE);
+ temp = readl(viapar->shared->engine_mmio + VIA_REG_CURSOR_MODE);
switch (Status) {
case HW_Cursor_ON:
temp |= 0x1;
@@ -517,25 +459,27 @@ void viafb_show_hw_cursor(struct fb_info *info, int Status)
default:
temp &= 0x7FFFFFFF;
}
- writel(temp, viaparinfo->io_virt + VIA_REG_CURSOR_MODE);
+ writel(temp, viapar->shared->engine_mmio + VIA_REG_CURSOR_MODE);
}
-int viafb_wait_engine_idle(void)
+void viafb_wait_engine_idle(struct fb_info *info)
{
+ struct viafb_par *viapar = info->par;
int loop = 0;
- while (!(readl(viaparinfo->io_virt + VIA_REG_STATUS) &
+ while (!(readl(viapar->shared->engine_mmio + VIA_REG_STATUS) &
VIA_VR_QUEUE_BUSY) && (loop < MAXLOOP)) {
loop++;
cpu_relax();
}
- while ((readl(viaparinfo->io_virt + VIA_REG_STATUS) &
+ while ((readl(viapar->shared->engine_mmio + VIA_REG_STATUS) &
(VIA_CMD_RGTR_BUSY | VIA_2D_ENG_BUSY | VIA_3D_ENG_BUSY)) &&
(loop < MAXLOOP)) {
loop++;
cpu_relax();
}
- return loop >= MAXLOOP;
+ if (loop >= MAXLOOP)
+ printk(KERN_ERR "viafb_wait_engine_idle: not syncing\n");
}
diff --git a/drivers/video/via/accel.h b/drivers/video/via/accel.h
index 4d93eba..615c84a 100644
--- a/drivers/video/via/accel.h
+++ b/drivers/video/via/accel.h
@@ -163,10 +163,8 @@
#define VIA_BITBLT_MONO 2
#define VIA_BITBLT_FILL 3
-void viafb_init_accel(struct viafb_shared *shared);
-void viafb_init_2d_engine(void);
-void viafb_hw_cursor_init(void);
-void viafb_show_hw_cursor(struct fb_info *info, int Status); int
-viafb_wait_engine_idle(void); void viafb_set_2d_color_depth(int bpp);
+int viafb_init_engine(struct fb_info *info);
+void viafb_show_hw_cursor(struct fb_info *info, int Status);
+void viafb_wait_engine_idle(struct fb_info *info);
#endif /* __ACCEL_H__ */
diff --git a/drivers/video/via/global.c b/drivers/video/via/global.c
index 33e7c45..b675cdb 100644
--- a/drivers/video/via/global.c
+++ b/drivers/video/via/global.c
@@ -32,7 +32,6 @@ int viafb_lcd_dsp_method = LCD_EXPANDSION;
int viafb_lcd_mode = LCD_OPENLDI;
int viafb_bpp = 32;
int viafb_bpp1 = 32;
-int viafb_accel = 1;
int viafb_CRT_ON = 1;
int viafb_DVI_ON;
int viafb_LCD_ON ;
diff --git a/drivers/video/via/hw.h b/drivers/video/via/hw.h
index 817033d..7302b40 100644
--- a/drivers/video/via/hw.h
+++ b/drivers/video/via/hw.h
@@ -855,7 +855,6 @@ extern int viafb_dual_fb;
extern int viafb_LCD2_ON;
extern int viafb_LCD_ON;
extern int viafb_DVI_ON;
-extern int viafb_accel;
extern int viafb_hotplug;
void viafb_write_reg_mask(u8 index, int io_port, u8 data, u8 mask);
diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c
index 3d639df..34e49b8 100644
--- a/drivers/video/via/viafbdev.c
+++ b/drivers/video/via/viafbdev.c
@@ -32,6 +32,8 @@ static u32 pseudo_pal[17];
static char *viafb_mode = "640x480";
static char *viafb_mode1 = "640x480";
+static int viafb_accel = 1;
+
/* Added for specifying active devices.*/
char *viafb_active_dev = "";
@@ -139,6 +141,9 @@ static int viafb_check_var(struct fb_var_screeninfo *var,
/* Adjust var according to our driver's own table */
viafb_fill_var_timing_info(var, viafb_refresh, vmode_index);
+ if (info->var.accel_flags & FB_ACCELF_TEXT &&
+ !ppar->shared->engine_mmio)
+ info->var.accel_flags = 0;
return 0;
}
@@ -176,8 +181,10 @@ static int viafb_set_par(struct fb_info *info)
viafb_update_fix(info);
viafb_bpp = info->var.bits_per_pixel;
- /* Update viafb_accel, it is necessary to our 2D accelerate */
- viafb_accel = info->var.accel_flags;
+ if (info->var.accel_flags & FB_ACCELF_TEXT)
+ info->flags &= ~FBINFO_HWACCEL_DISABLED;
+ else
+ info->flags |= FBINFO_HWACCEL_DISABLED;
}
return 0;
@@ -763,10 +770,11 @@ static void viafb_fillrect(struct fb_info *info,
const struct fb_fillrect *rect)
{
struct viafb_par *viapar = info->par;
+ struct viafb_shared *shared = viapar->shared;
u32 fg_color;
u8 rop;
- if (!viapar->shared->hw_bitblt) {
+ if (info->flags & FBINFO_HWACCEL_DISABLED || !shared->hw_bitblt) {
cfb_fillrect(info, rect);
return;
}
@@ -785,7 +793,7 @@ static void viafb_fillrect(struct fb_info *info,
rop = 0xF0;
DEBUG_MSG(KERN_DEBUG "viafb 2D engine: fillrect\n");
- if (viapar->shared->hw_bitblt(viapar->io_virt, VIA_BITBLT_FILL,
+ if (shared->hw_bitblt(shared->engine_mmio, VIA_BITBLT_FILL,
rect->width, rect->height, info->var.bits_per_pixel,
viapar->vram_addr, info->fix.line_length, rect->dx, rect->dy,
NULL, 0, 0, 0, 0, fg_color, 0, rop))
@@ -796,8 +804,9 @@ static void viafb_copyarea(struct fb_info *info,
const struct fb_copyarea *area)
{
struct viafb_par *viapar = info->par;
+ struct viafb_shared *shared = viapar->shared;
- if (!viapar->shared->hw_bitblt) {
+ if (info->flags & FBINFO_HWACCEL_DISABLED || !shared->hw_bitblt) {
cfb_copyarea(info, area);
return;
}
@@ -806,7 +815,7 @@ static void viafb_copyarea(struct fb_info *info,
return;
DEBUG_MSG(KERN_DEBUG "viafb 2D engine: copyarea\n");
- if (viapar->shared->hw_bitblt(viapar->io_virt, VIA_BITBLT_COLOR,
+ if (shared->hw_bitblt(shared->engine_mmio, VIA_BITBLT_COLOR,
area->width, area->height, info->var.bits_per_pixel,
viapar->vram_addr, info->fix.line_length, area->dx, area->dy,
NULL, viapar->vram_addr, info->fix.line_length,
@@ -818,10 +827,11 @@ static void viafb_imageblit(struct fb_info *info,
const struct fb_image *image)
{
struct viafb_par *viapar = info->par;
+ struct viafb_shared *shared = viapar->shared;
u32 fg_color = 0, bg_color = 0;
u8 op;
- if (!viapar->shared->hw_bitblt ||
+ if (info->flags & FBINFO_HWACCEL_DISABLED || !shared->hw_bitblt ||
(image->depth != 1 && image->depth != viapar->depth)) {
cfb_imageblit(info, image);
return;
@@ -842,7 +852,7 @@ static void viafb_imageblit(struct fb_info *info,
op = VIA_BITBLT_COLOR;
DEBUG_MSG(KERN_DEBUG "viafb 2D engine: imageblit\n");
- if (viapar->shared->hw_bitblt(viapar->io_virt, op,
+ if (shared->hw_bitblt(shared->engine_mmio, op,
image->width, image->height, info->var.bits_per_pixel,
viapar->vram_addr, info->fix.line_length, image->dx, image->dy,
(u32 *)image->data, 0, 0, 0, 0, fg_color, bg_color, 0))
@@ -852,6 +862,7 @@ static void viafb_imageblit(struct fb_info *info,
static int viafb_cursor(struct fb_info *info, struct fb_cursor *cursor)
{
struct viafb_par *viapar = info->par;
+ void __iomem *engine = viapar->shared->engine_mmio;
u32 temp, xx, yy, bg_color = 0, fg_color = 0,
chip_name = viapar->shared->chip_info.gfx_chip_name;
int i, j = 0, cur_size = 64;
@@ -866,7 +877,7 @@ static int viafb_cursor(struct fb_info *info, struct fb_cursor *cursor)
if (cursor->set & FB_CUR_SETHOT) {
temp = (cursor->hot.x << 16) + cursor->hot.y;
- writel(temp, viapar->io_virt + VIA_REG_CURSOR_ORG);
+ writel(temp, engine + VIA_REG_CURSOR_ORG);
}
if (cursor->set & FB_CUR_SETPOS) {
@@ -874,7 +885,7 @@ static int viafb_cursor(struct fb_info *info, struct fb_cursor *cursor)
xx = cursor->image.dx - info->var.xoffset;
temp = yy & 0xFFFF;
temp |= (xx << 16);
- writel(temp, viapar->io_virt + VIA_REG_CURSOR_POS);
+ writel(temp, engine + VIA_REG_CURSOR_POS);
}
if (cursor->image.width <= 32 && cursor->image.height <= 32)
@@ -888,13 +899,13 @@ static int viafb_cursor(struct fb_info *info, struct fb_cursor *cursor)
}
if (cursor->set & FB_CUR_SETSIZE) {
- temp = readl(viapar->io_virt + VIA_REG_CURSOR_MODE);
+ temp = readl(engine + VIA_REG_CURSOR_MODE);
if (cur_size == 32)
temp |= 0x2;
else
temp &= ~0x2;
- writel(temp, viapar->io_virt + VIA_REG_CURSOR_MODE);
+ writel(temp, engine + VIA_REG_CURSOR_MODE);
}
if (cursor->set & FB_CUR_SETCMAP) {
@@ -921,8 +932,8 @@ static int viafb_cursor(struct fb_info *info, struct fb_cursor *cursor)
((info->cmap.blue[bg_color] & 0xFF00) >> 8);
}
- writel(bg_color, viapar->io_virt + VIA_REG_CURSOR_BG);
- writel(fg_color, viapar->io_virt + VIA_REG_CURSOR_FG);
+ writel(bg_color, engine + VIA_REG_CURSOR_BG);
+ writel(fg_color, engine + VIA_REG_CURSOR_FG);
}
if (cursor->set & FB_CUR_SETSHAPE) {
@@ -995,8 +1006,8 @@ static int viafb_cursor(struct fb_info *info, struct fb_cursor *cursor)
static int viafb_sync(struct fb_info *info)
{
- if (viafb_accel)
- viafb_wait_engine_idle();
+ if (!(info->flags & FBINFO_HWACCEL_DISABLED))
+ viafb_wait_engine_idle(info);
return 0;
}
@@ -1826,22 +1837,18 @@ static int __devinit via_pci_probe(void)
viafb_get_mmio_info(&viafbinfo->fix.mmio_start,
&viafbinfo->fix.mmio_len);
- viaparinfo->io_virt = ioremap_nocache(viafbinfo->fix.mmio_start,
- viafbinfo->fix.mmio_len);
- if (!viaparinfo->io_virt) {
- printk(KERN_WARNING "ioremap failed: hardware acceleration disabled\n");
- viafb_accel = 0;
- }
-
viafbinfo->node = 0;
viafbinfo->fbops = &viafb_ops;
viafbinfo->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
viafbinfo->pseudo_palette = pseudo_pal;
- if (viafb_accel) {
- viafb_init_accel(viaparinfo->shared);
- viafb_init_2d_engine();
- viafb_hw_cursor_init();
+ if (viafb_accel && !viafb_init_engine(viafbinfo)) {
+ viafbinfo->flags |= FBINFO_HWACCEL_COPYAREA |
+ FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_IMAGEBLIT;
+ default_var.accel_flags = FB_ACCELF_TEXT;
+ } else {
+ viafbinfo->flags |= FBINFO_HWACCEL_DISABLED;
+ default_var.accel_flags = 0;
}
if (viafb_second_size && (viafb_second_size < 8)) {
@@ -1922,15 +1929,6 @@ static int __devinit via_pci_probe(void)
default_var.lower_margin = 4;
default_var.hsync_len = default_var.left_margin;
default_var.vsync_len = 4;
- default_var.accel_flags = 0;
-
- if (viafb_accel) {
- viafbinfo->flags |=
- (FBINFO_HWACCEL_COPYAREA | FBINFO_HWACCEL_FILLRECT |
- FBINFO_HWACCEL_IMAGEBLIT);
- default_var.accel_flags |= FB_ACCELF_TEXT;
- } else
- viafbinfo->flags |= FBINFO_HWACCEL_DISABLED;
if (viafb_dual_fb) {
viafbinfo1 = framebuffer_alloc(viafb_par_length, NULL);
@@ -1953,12 +1951,6 @@ static int __devinit via_pci_probe(void)
viaparinfo1->fbmem_used;
viaparinfo->fbmem_free = viaparinfo->memsize;
viaparinfo->fbmem_used = 0;
- if (viafb_accel) {
- viaparinfo1->VQ_start = viaparinfo->VQ_start -
- viafb_second_offset;
- viaparinfo1->VQ_end = viaparinfo->VQ_end -
- viafb_second_offset;
- }
viaparinfo->iga_path = IGA1;
viaparinfo1->iga_path = IGA2;
@@ -2032,7 +2024,7 @@ static void __devexit via_pci_remove(void)
if (viafb_dual_fb)
unregister_framebuffer(viafbinfo1);
iounmap((void *)viafbinfo->screen_base);
- iounmap(viaparinfo->io_virt);
+ iounmap(viaparinfo->shared->engine_mmio);
viafb_delete_i2c_buss(viaparinfo);
@@ -2194,7 +2186,7 @@ MODULE_PARM_DESC(viafb_SAMM_ON,
module_param(viafb_accel, int, 0);
MODULE_PARM_DESC(viafb_accel,
- "Set 2D Hardware Acceleration.(Default = OFF)");
+ "Set 2D Hardware Acceleration: 0 = OFF, 1 = ON (default)");
module_param(viafb_active_dev, charp, 0);
MODULE_PARM_DESC(viafb_active_dev, "Specify active devices.");
diff --git a/drivers/video/via/viafbdev.h b/drivers/video/via/viafbdev.h
index 159619b..0c94d24 100644
--- a/drivers/video/via/viafbdev.h
+++ b/drivers/video/via/viafbdev.h
@@ -51,7 +51,9 @@ struct viafb_shared {
struct chip_information chip_info;
/* hardware acceleration stuff */
+ void __iomem *engine_mmio;
u32 cursor_vram_addr;
+ u32 vq_vram_addr; /* virtual queue address in video ram */
int (*hw_bitblt)(void __iomem *engine, u8 op, u32 width, u32 height,
u8 dst_bpp, u32 dst_addr, u32 dst_pitch, u32 dst_x, u32 dst_y,
u32 *src_mem, u32 src_addr, u32 src_pitch, u32 src_x, u32 src_y,
@@ -61,13 +63,11 @@ struct viafb_shared {
struct viafb_par {
u8 depth;
u32 vram_addr;
- void __iomem *io_virt; /*iospace virtual memory address */
+
unsigned int fbmem; /*framebuffer physical memory address */
unsigned int memsize; /*size of fbmem */
u32 fbmem_free; /* Free FB memory */
u32 fbmem_used; /* Use FB memory size */
- u32 VQ_start; /* Virtual Queue Start Address */
- u32 VQ_end; /* Virtual Queue End Address */
u32 iga_path;
struct viafb_shared *shared;
@@ -90,7 +90,6 @@ extern int viafb_dual_fb;
extern int viafb_LCD2_ON;
extern int viafb_LCD_ON;
extern int viafb_DVI_ON;
-extern int viafb_accel;
extern int viafb_hotplug;
extern int viafb_memsize;
--
1.6.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/