Re: [PATCH 3/6] acpi: thermal: display forced passive trip pointsin proc

[Zhang Rui]

On Thu, 2009-08-27 at 00:17 +0800, Frans Pop wrote:
> Users can force passive cooling for a thermal zone that does not
> have _PSV defined in ACPI by setting the passive attribute in sysfs.
> It's useful to display such trip points in /proc/acpi/thermal_zone.
> 
> .../TZ1/cooling_mode:<setting not supported>
> .../TZ1/polling_frequency:polling frequency:       10 seconds
> .../TZ1/state:state:                   ok
> .../TZ1/temperature:temperature:             53 C
> .../TZ1/trip_points:critical (S5):           110 C
> .../TZ1/trip_points:passive (forced):        95 C
> 
> And if not set (passive is 0):
> .../TZ1/trip_points:passive (forced):<not set>
> 
> Signed-off-by: Frans Pop <elendil@xxxxxxxxx>
> Cc: Zhang Rui <rui.zhang@xxxxxxxxx>
> Cc: Matthew Garrett <mjg59@xxxxxxxxxxxxx>
> 
Acked-by: Zhang Rui <rui.zhang@xxxxxxxxx>

thanks,
rui
> diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
> index 564ea14..a4e507b 100644
> --- a/drivers/acpi/thermal.c
> +++ b/drivers/acpi/thermal.c
> @@ -1050,6 +1050,13 @@ static int acpi_thermal_trip_seq_show(struct seq_file *seq, void *offset)
>  				   acpi_device_bid(device));
>  		}
>  		seq_puts(seq, "\n");
> +	} else {
> +		seq_printf(seq, "passive (forced):");
> +		if (tz->thermal_zone->forced_passive)
> +			seq_printf(seq, "        %i C\n",
> +				   tz->thermal_zone->forced_passive / 1000);
> +		else
> +			seq_printf(seq, "<not set>\n");
>  	}
>  
>  	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/