[PATCH 09/20] omapfb: Add support for the Gumstix Overo LCD
From: Imre Deak
Date: Wed Jun 24 2009 - 07:37:45 EST
From: Steve Sakoman <steve@xxxxxxxxxxx>
Signed-off-by: Steve Sakoman <steve@xxxxxxxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx>
Acked-by: Krzysztof Helt <krzysztof.h1@xxxxx>
---
drivers/video/omap/Kconfig | 21 +++++
drivers/video/omap/Makefile | 1 +
drivers/video/omap/lcd_overo.c | 179 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 201 insertions(+), 0 deletions(-)
create mode 100644 drivers/video/omap/lcd_overo.c
diff --git a/drivers/video/omap/Kconfig b/drivers/video/omap/Kconfig
index 574453f..eb05e09 100644
--- a/drivers/video/omap/Kconfig
+++ b/drivers/video/omap/Kconfig
@@ -7,6 +7,27 @@ config FB_OMAP
help
Frame buffer driver for OMAP based boards.
+choice
+ depends on FB_OMAP && MACH_OVERO
+ prompt "Screen resolution"
+ default FB_OMAP_079M3R
+ help
+ Selected desired screen resolution
+
+config FB_OMAP_031M3R
+ boolean "640 x 480 @ 60 Hz Reduced blanking"
+
+config FB_OMAP_048M3R
+ boolean "800 x 600 @ 60 Hz Reduced blanking"
+
+config FB_OMAP_079M3R
+ boolean "1024 x 768 @ 60 Hz Reduced blanking"
+
+config FB_OMAP_092M9R
+ boolean "1280 x 720 @ 60 Hz Reduced blanking"
+
+endchoice
+
config FB_OMAP_LCD_MIPID
bool "MIPI DBI-C/DCS compatible LCD support"
depends on FB_OMAP && SPI_MASTER
diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile
index 9ff1815..0d2996a 100644
--- a/drivers/video/omap/Makefile
+++ b/drivers/video/omap/Makefile
@@ -33,6 +33,7 @@ objs-y$(CONFIG_MACH_OMAP2EVM) += lcd_omap2evm.o
objs-y$(CONFIG_MACH_OMAP3EVM) += lcd_omap3evm.o
objs-y$(CONFIG_MACH_OMAP3_BEAGLE) += lcd_omap3beagle.o
objs-y$(CONFIG_FB_OMAP_LCD_MIPID) += lcd_mipid.o
+objs-y$(CONFIG_MACH_OVERO) += lcd_overo.o
omapfb-objs := $(objs-yy)
diff --git a/drivers/video/omap/lcd_overo.c b/drivers/video/omap/lcd_overo.c
new file mode 100644
index 0000000..2bc5c92
--- /dev/null
+++ b/drivers/video/omap/lcd_overo.c
@@ -0,0 +1,179 @@
+/*
+ * LCD panel support for the Gumstix Overo
+ *
+ * Author: Steve Sakoman <steve@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/i2c/twl4030.h>
+
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/omapfb.h>
+#include <asm/mach-types.h>
+
+#define LCD_ENABLE 144
+
+static int overo_panel_init(struct lcd_panel *panel,
+ struct omapfb_device *fbdev)
+{
+ if ((gpio_request(LCD_ENABLE, "LCD_ENABLE") == 0) &&
+ (gpio_direction_output(LCD_ENABLE, 1) == 0))
+ gpio_export(LCD_ENABLE, 0);
+ else
+ printk(KERN_ERR "could not obtain gpio for LCD_ENABLE\n");
+
+ return 0;
+}
+
+static void overo_panel_cleanup(struct lcd_panel *panel)
+{
+ gpio_free(LCD_ENABLE);
+}
+
+static int overo_panel_enable(struct lcd_panel *panel)
+{
+ gpio_set_value(LCD_ENABLE, 1);
+ return 0;
+}
+
+static void overo_panel_disable(struct lcd_panel *panel)
+{
+ gpio_set_value(LCD_ENABLE, 0);
+}
+
+static unsigned long overo_panel_get_caps(struct lcd_panel *panel)
+{
+ return 0;
+}
+
+struct lcd_panel overo_panel = {
+ .name = "overo",
+ .config = OMAP_LCDC_PANEL_TFT,
+ .bpp = 16,
+ .data_lines = 24,
+
+#if defined CONFIG_FB_OMAP_031M3R
+
+ /* 640 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */
+ .x_res = 640,
+ .y_res = 480,
+ .hfp = 48,
+ .hsw = 32,
+ .hbp = 80,
+ .vfp = 3,
+ .vsw = 4,
+ .vbp = 7,
+ .pixel_clock = 23500,
+
+#elif defined CONFIG_FB_OMAP_048M3R
+
+ /* 800 x 600 @ 60 Hz Reduced blanking VESA CVT 0.48M3-R */
+ .x_res = 800,
+ .y_res = 600,
+ .hfp = 48,
+ .hsw = 32,
+ .hbp = 80,
+ .vfp = 3,
+ .vsw = 4,
+ .vbp = 11,
+ .pixel_clock = 35500,
+
+#elif defined CONFIG_FB_OMAP_079M3R
+
+ /* 1024 x 768 @ 60 Hz Reduced blanking VESA CVT 0.79M3-R */
+ .x_res = 1024,
+ .y_res = 768,
+ .hfp = 48,
+ .hsw = 32,
+ .hbp = 80,
+ .vfp = 3,
+ .vsw = 4,
+ .vbp = 15,
+ .pixel_clock = 56000,
+
+#elif defined CONFIG_FB_OMAP_092M9R
+
+ /* 1280 x 720 @ 60 Hz Reduced blanking VESA CVT 0.92M9-R */
+ .x_res = 1280,
+ .y_res = 720,
+ .hfp = 48,
+ .hsw = 32,
+ .hbp = 80,
+ .vfp = 3,
+ .vsw = 5,
+ .vbp = 13,
+ .pixel_clock = 64000,
+
+#else
+
+ /* use 640 x 480 if no config option */
+ /* 640 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */
+ .x_res = 640,
+ .y_res = 480,
+ .hfp = 48,
+ .hsw = 32,
+ .hbp = 80,
+ .vfp = 3,
+ .vsw = 4,
+ .vbp = 7,
+ .pixel_clock = 23500,
+
+#endif
+
+ .init = overo_panel_init,
+ .cleanup = overo_panel_cleanup,
+ .enable = overo_panel_enable,
+ .disable = overo_panel_disable,
+ .get_caps = overo_panel_get_caps,
+};
+
+static int overo_panel_probe(struct platform_device *pdev)
+{
+ omapfb_register_panel(&overo_panel);
+ return 0;
+}
+
+static int overo_panel_remove(struct platform_device *pdev)
+{
+ /* omapfb does not have unregister_panel */
+ return 0;
+}
+
+static struct platform_driver overo_panel_driver = {
+ .probe = overo_panel_probe,
+ .remove = overo_panel_remove,
+ .driver = {
+ .name = "overo_lcd",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init overo_panel_drv_init(void)
+{
+ return platform_driver_register(&overo_panel_driver);
+}
+
+static void __exit overo_panel_drv_exit(void)
+{
+ platform_driver_unregister(&overo_panel_driver);
+}
+
+module_init(overo_panel_drv_init);
+module_exit(overo_panel_drv_exit);
--
1.6.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/